kg - HICLOVER Incinerator

waste

Pig corpses / stray dogs and larger animal carcasses

Jun 25, 2021 by hiclover 0 Comments #able, #combustion, #corpses, #English, #incinerator, #kg, #less, #medical, #must, #pig, #pre, #should, #stray, #than, #waste, #will

Pig corpses / stray dogs and larger animal carcasses –

Load capacity in the range of up to 300 kg / Burn rate approx. 50 kg per hour

Temperature Controlled Burner. Incinerators to be designed to meet the Norms of Pollution Control. Technology: Heavy-duty casing, to be a quality, rugged, reliable, economical Incinerator with relevant control, easy to operate and self-contained. Units to be pre-assembled, pre-piped, pre-wired & tested before Transport / Export

The supply will comprise the special equipment for effective medical / clinical waste management as mentioned above for a new private environment management company with operations in West and East Malaysia; Indonesia and Thailand to carry out those professional services in order to comply with the safe disposal requirements for clinical and medical waste in the region and to meet the higher technical standard in this particular field.

1.Burning rate: 250 Kg/hr.

2.It should be able to Operate not Less than 10 hours/day

3.This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

4.Design Specification: Types A, B, C, D, and E of medical waste

5.“PYROLYTIC” combustion, by controlling the gasification of waste.

6.The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.

7.It should be able to reduce the volume of wastes by 98%.

8.It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

9. The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

The Temperatures of combustion: Minimum will be 850oC and max 1400oC

Post combustion: >1100oC.

10. The Internal diameter of the Chimney: Ø 400mm² and its height: 8 Meter

11. The Volume of the combustion chamber: Not Less Than 2.3 M³

12. Burner operation should be Automatic On/Off

13. Fuel : diesel, LPG, Natural Gas, Bio fuel

14. The supplier must provide necessary information for the best of the installation

waste

Design standard Multiple chamber incinerator

Jun 25, 2021 by hiclover 0 Comments #chamber, #cubic, #design, #domestical, #English, #hearth, #hr, #incinerator, #kg, #least, #meters, #multiple, #organics, #standard, #volume, #waste

Waste type organics domestical waste

Calorific value of waste 9,25 MJ/kg

Ash content 20.80 %

Density 291 Kg/m3

Waste quantity (kg per hr) 12,500

Total Heat input (Gcal/hr) 23.71

organics domestical waste Solid Domestic waste, after separating the recyclable, such as: plastic, cloth, metal, paper, wood, glass, stones, etc. than larger 10 cms

Design standard Multiple chamber incinerator to the design of EPA standards, Air pollution control

Description of the Chimney Top mounted, self supporting

Incinerator performance 150kg/hr

Refuse Hospital waste and carcasses

Recommended Temperatures Minimum 1000⁰C

Dimensions:

Length

Width

Height

Extra width for burners At least 3000mm

Loading door opening Minimum 700mm x 600mm

Hearth area 5.00square meters

Description or grate/hearth A full hearth supplied to prevent contaminated liquids from flowing into the ash pit without being incinerated

Primary chamber volume At least 3 cubic meters

Mixing chamber volume At least 1 cubic meters

Settling chamber volume At least 3 cubic meters

Weight excluding chimney 15, 000kg at manufacture

Firing tools supplied Hoe, Poker and rake

waste

Design standard Multiple chamber incinerator

Jun 25, 2021 by hiclover 0 Comments #chamber, #cubic, #design, #domestical, #English, #hearth, #hr, #incinerator, #kg, #least, #meters, #multiple, #organics, #standard, #volume, #waste

Waste type organics domestical waste

Calorific value of waste 9,25 MJ/kg

Ash content 20.80 %

Density 291 Kg/m3

Waste quantity (kg per hr) 12,500

Total Heat input (Gcal/hr) 23.71

organics domestical waste Solid Domestic waste, after separating the recyclable, such as: plastic, cloth, metal, paper, wood, glass, stones, etc. than larger 10 cms

Design standard Multiple chamber incinerator to the design of EPA standards, Air pollution control

Description of the Chimney Top mounted, self supporting

Incinerator performance 150kg/hr

Refuse Hospital waste and carcasses

Recommended Temperatures Minimum 1000⁰C

Dimensions:

Length

Width

Height

Extra width for burners At least 3000mm

Loading door opening Minimum 700mm x 600mm

Hearth area 5.00square meters

Description or grate/hearth A full hearth supplied to prevent contaminated liquids from flowing into the ash pit without being incinerated

Primary chamber volume At least 3 cubic meters

Mixing chamber volume At least 1 cubic meters

Settling chamber volume At least 3 cubic meters

Weight excluding chimney 15, 000kg at manufacture

Firing tools supplied Hoe, Poker and rake

waste

Incinerator Rated Capacity: 100/KG/Hr

Jun 24, 2021 by hiclover 0 Comments #capacity, #combustion, #elements, #English, #heating, #hr, #incinerator, #kg, #mild, #moc, #primary, #provided, #rated, #steel, #type

Incinerator Rated Capacity: 100/KG/Hr

Type of Design: Double Chambered

Mode of Heating: Heating Elements

Primary Combustion Chamber

Waste Charging Door: Provided with refractory lining with sealing gaskets

Ash Removed Door: Provided with refractory lining with sealing gaskets

Outer Body MOC: Mild Steel, 5mm

Primary Chamber: Stainless Steel

Operating Temperature :800. ± 50◦C

Insulation: Insulation Brick

Heating Elements Type: Kanthal Al Grade

Power Consumption: 75 KW ( Initial Load )

Electrical Supply :3 Phase 440 Volt

Control Panel

MOC: Mild Steel Power Coated

No. of Temp: Controllers : 2 Nos

Details: The Control Panel will be provided with contract as relays , switches , indicators etc . Operative on 3 phase.

I.D.Fan

Type: Centrifugal Type

MOC: Mild Steel

Capacity:2 HP/3Phase

Make of Motor: Kirloskar /Havells/Crompton

Combustion Air Fan

Type: Centrifugal Type

Capacity: 1HP/3Phase

Make of Motor: Kirloskar /Havells/Crompton

Stack:

Type: Wire Supported

MOC: Mild Steel of ISstd

Height :3 Meters or more

waste

Incinerator Rated Capacity: 100/KG/Hr

Jun 24, 2021 by hiclover 0 Comments #capacity, #combustion, #elements, #English, #heating, #hr, #incinerator, #kg, #mild, #moc, #primary, #provided, #rated, #steel, #type

Incinerator Rated Capacity: 100/KG/Hr

Type of Design: Double Chambered

Mode of Heating: Heating Elements

Primary Combustion Chamber

Waste Charging Door: Provided with refractory lining with sealing gaskets

Ash Removed Door: Provided with refractory lining with sealing gaskets

Outer Body MOC: Mild Steel, 5mm

Primary Chamber: Stainless Steel

Operating Temperature :800. ± 50◦C

Insulation: Insulation Brick

Heating Elements Type: Kanthal Al Grade

Power Consumption: 75 KW ( Initial Load )

Electrical Supply :3 Phase 440 Volt

Control Panel

MOC: Mild Steel Power Coated

No. of Temp: Controllers : 2 Nos

Details: The Control Panel will be provided with contract as relays , switches , indicators etc . Operative on 3 phase.

I.D.Fan

Type: Centrifugal Type

MOC: Mild Steel

Capacity:2 HP/3Phase

Make of Motor: Kirloskar /Havells/Crompton

Combustion Air Fan

Type: Centrifugal Type

Capacity: 1HP/3Phase

Make of Motor: Kirloskar /Havells/Crompton

Stack:

Type: Wire Supported

MOC: Mild Steel of ISstd

Height :3 Meters or more

waste

incinerador de residuos de bolsa roja

Jun 23, 2021 by hiclover 0 Comments #acero, #altura, #ancho, #cm, #control, #de, #Español, #hasta, #incinerador, #kg, #la, #longitud, #mara, #puerta, #tama, #temporizador

“Cámara de desechos

Capacidad de la cámara 300 kg

Volumen de la cámara .54m3

Tamaño de la cámara (exterior) Ancho: 91 cm, Altura: 86 cm Longitud:

152cm

Apertura de puerta 66 x 76 cm

Altura hasta puerta 84 cm

Altura hasta la parte superior de la pila 5,4 m

Tamaño de losa sugerido (largo x ancho x grosor) 1.8

mx 2,4 mx 10 cm

Tasa de quema: Aproximadamente 45 kg / h.

Apilar:

2′-14 ″ ”diá. (36 cm), acero aluminizado calibre 14 (1,90 mm),

forrado refractario

8′-12 ″ ”diá. (30,5 cm), calibre 16 (1,52 ″

“Quemadores Diesel

Temporizador manual de funcionamiento

Servicio eléctrico Estándar: 115 voltios, 60 HZ, 20 amperios

Descripción general:

Primario

Cámara: carcasa de acero resistente

Revestimiento y aislamiento refractarios de alta calidad.

Puerta de carga superior grande de tamaño completo y líquido

umbral de retención

1 x quemadores de encendido de gasoil encendido / apagado

Puerta de extracción de cenizas

Chimenea: acero inoxidable resistente

caja

1,5 m de longitud

Pila revestida de refractario de 0,6 m

Panel de control: Control de 1 quemador

Control de temporizador 0-12 horas

Ventilador integral

control de temporizador

Monitoreo de temperatura

Control automático

Configuración del tiempo de ciclo

Complementos: Manuales de operación y mantenimiento.

Lista de repuestos

Rastrillo de ceniza

Containerización: contenedor de envío de 20 pies con incinerador instalado

Depósito de combustible de 500 litros ”

waste

incinerador 500 kg por hora

Jun 22, 2021 by hiclover 0 Comments #combusti, #con, #de, #debe, #el, #en, #Español, #hora, #incinerador, #kg, #la, #mara, #para, #por, #sistema, #un

La cámara de combustión secundaria debe destruir el producto contaminante y debe resistir a altas temperaturas (1100 ° C)

Sistema de filtrado de procesos: Scruber debe mencionarse como opcional

Cumplimiento de estándares de emisión: BS 3316 o estándar equivalente

Versión, toda la carcasa de los animales (ganado, caballos,

Ovinos, porcinos, etc.), así como residuos biológicamente peligrosos.

Productos en la estufa de combustible.

? Opening Doors: el sistema automatizado de cierre y fijación,

Que son gestionados de forma remota por el operador.

? diseñado para trabajar en modo largo y rápido

Acción (EP de inicio rápido – i)

? Totalmente móvil: montado sobre chasis con ruedas

Incluso durante la operación. Deben proporcionarse incineradores

Como equipamiento de serie un camión especial

– Temperatura media de combustión: ≥ 900 ° C

– Montaje de la habitación: doble pared;

– Materiales de la cámara de combustión en contacto con la zona de incineración: material refractario que puede soportar

temperaturas superiores a 1100 ° C;

– Un quemador que utiliza combustible diesel;

– Capacidad de destrucción por hora mínimo 3 kg

– Consumo de combustible menor o igual a 3 litros por hora

– Chimenea de acero con una longitud mínima de seis metros

– Manejo: compacto y requiere un bajo nivel de habilidad técnica;

– Seguridad: incinerador con sistema de seguridad para resistir golpes de explosión por la introducción involuntaria de

explosivos;

– Capacidad de la sala: mínimo 100 litros

– Cámara de cenizas: proporciona una bandeja de recuperación de cenizas.

– El incinerador propuesto será un sistema de montaje modular para superar las dificultades de mantenimiento en caso de grietas.

(Envíe imágenes o fotografías).

– Cada unidad debe estar equipada con un dispositivo de lucha contra el fuego.

– Cada unidad debe ser suministrada con los siguientes accesorios:

Un extintor mínimo de 6 kg

Un cubo de basura para el almacenamiento temporal de residuos y cenizas;

waste

Incinerator with Capacity of destruction in weight: 60 Kg/h.

Jun 21, 2021 by hiclover 0 Comments #able, #burner, #capacity, #chamber, #combustion, #destruction, #door, #English, #incinerator, #kg, #loading, #must, #refractory, #should, #waste, #weight

Capacity of destruction in weight: 60 Kg/h.

It should be able to operate not less than 10 hours/day

This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

Design Specification : Types A, B, C, D, and E of medical waste

“PYROLYTIC” combustion, by controlling the gasification of waste.

The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.

It should be able to reduce the volume of wastes by 98%.

It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

The Temperatures of combustion: Minimum will be 850^oC and max 1400^oC

Post combustion: >1100^oC.

The Internal diameter of the Chimney: Ø 400 and its height: 8 m

The Volume of the combustion chamber: 1.200 L

The Dimension of the door for loading in cm: 70×70.

Burner operation should be Automatic On/Off

Fuel : diesel

The supplier must provide necessary information for the best of the installation

This incinerator with “PYROLYTIC” combustion must have:

A combustion chamber of waste:

* Perfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load

* A burner of lighting which the use is limited to the ignition of waste.

* Frontage of loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.

* The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet metal.

* Composition of the refractory;

Refractory concrete :

. Thickness : ≥100 mm

. Nature: 42% of Al203

Insulate in fibrous panels :

. Thickness: ≥75 mm

Nature: Calcium silicate.

* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.

waste

Incinerator with Capacity of destruction in weight: 60 Kg/h.

Jun 21, 2021 by hiclover 0 Comments #able, #burner, #capacity, #chamber, #combustion, #destruction, #door, #English, #incinerator, #kg, #loading, #must, #refractory, #should, #waste, #weight

Capacity of destruction in weight: 60 Kg/h.

It should be able to operate not less than 10 hours/day

This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

Design Specification : Types A, B, C, D, and E of medical waste

“PYROLYTIC” combustion, by controlling the gasification of waste.

The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.

It should be able to reduce the volume of wastes by 98%.

It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

The Temperatures of combustion: Minimum will be 850^oC and max 1400^oC

Post combustion: >1100^oC.

The Internal diameter of the Chimney: Ø 400 and its height: 8 m

The Volume of the combustion chamber: 1.200 L

The Dimension of the door for loading in cm: 70×70.

Burner operation should be Automatic On/Off

Fuel : diesel

The supplier must provide necessary information for the best of the installation

This incinerator with “PYROLYTIC” combustion must have:

A combustion chamber of waste:

* Perfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load

* A burner of lighting which the use is limited to the ignition of waste.

* Frontage of loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.

* Composition of the refractory;

Refractory concrete :

. Thickness : ≥100 mm

. Nature: 42% of Al203

Insulate in fibrous panels :

. Thickness: ≥75 mm

Nature: Calcium silicate.

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.

waste

Incineradores em contêineres

Jun 21, 2021 by hiclover 0 Comments #alimenta, #capacidade, #combust, #da, #de, #dia, #es, #hora, #kg, #leo, #litros, #mara, #por, #português, #queima, #taxa

Modelo	CA50
Capacidade de alimentação	Média de 60 kg por alimentação
Taxa de queima	Média de 70 kg por hora
Tempo de gravação por feed	1 hora
Voltagem	220V
Poder	0.7Kw
Combustível	Óleo diesel
Queimador	Queimador da Itália
Modo de alimentação	Manual
Consumo de combustível (óleo)	Média de 18 Kgs / hora
Dimensões internas	100x80x70cm (Câmara Primária)
Dimensões externas	230 x 130 x 155 cm (corpo principal)
Câmara de combustão de resíduos	560 litros
Câmara de Pós-Combustão	280 litros
Capacidade do tanque de óleo	100 litros
Abertura da porta	70 x 50cm
Chaminé	5,0 milhões
Peso bruto	4500kgs
Material da Câmara	Tijolo refratário, concreto refratário
Máx. Valor Calor	240.000 Kcal / Hr.
Especificações Técnicas de Operação
Temperatura da Câmara Sólida	800 ⁰ C -1000 ⁰ C
Temperatura da câmara de gás	1000 ⁰ C -1200 ⁰ C
Câmara Anti-Taxa	1450 ⁰ C
Tempo de residência	2.0 seg.
Eficiência de queima	＞ 98%
Desperdício de energia calórica inferior	3000Kcal

Tag: kg