Tag: incinerator

low-cost medical waste incinerator is good idea for small clinic, small hospital, etc.Incineration is the only method providing complete destruction and neutralization of the medical waste ideally at the source. For developing country and regions, we support cheap cost budget customer to purchase the small scale incinerator, with basic function, burning rate 10kgs to 50kgs per hour capacity, single combustion chamber and three combustion chambers incinerator.

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 2100 kgs 2100 kgs 2300 kgs 2500 kgs
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃

Campaigners welcome Heathrow’s Intends to move incinerator

Heathrow Airport has announced plans to move an incinerator away from Stanwell and create a 15 mile ‘green ring’ around town.

A Labour county councillor nevertheless has stated it is like moving pieces around a chess board.

“But neighborhood resident Andrew McLuskey has done all of the hard work.

“But in saying that, we’re still fighting off to stop growth occurring at Heathrow at all.

“There are still serious reservations and I do not feel an expansion of the airport is right for the region or the whole country.

“We’re talking semantics here — it’s a big growth in a very cramped area. It’s like moving pieces around a chess board — whatever we do not like around Stanwell will be just as enormous someplace else.”

Changes to the programs include introducing a 15 mile’green corridor’ which will increase the quantity of recreational distance between town and a new car park south to the airport — which has also been reduced in size.

A brand new park and an all-weather sports pitch has been mooted for the region, as well as the potential construction of’reconciliation ponds’ to help control the release of floodwater.

Roberto Tambini, chief executive of Spelthorne Borough Council, stated:”We’re thrilled that Heathrow has listened to and acted upon our opinions in creating its upgraded expansion plans and the inhabitants of Spelthorne have been provided an improved deal for a result.

“I am certain that we are able to work together and Heathrow will continue to listen to Spelthorne residents and demonstrate a flexible way of future proposals.”

A number of those 16 billion of private money being spent will also be utilised to encourage the Environment Agency in developing flood prevention schemes to safeguard homes and land in the surrounding regions.

The airport has also announced plans to fund a new bypass to replace the present A3044 in Colnbrook and Poyle to ease congestion problems.

John Holland-Kaye, chief executive of Heathrow stated:”The growth of Heathrow can bring significant benefits for local people as well as the UK economy.

“As well as bringing 50,000 new jobs and 10,000 apprenticeships, we can also enhance the ecological landscape across the airport and also mitigate some of today’s problems including street congestion and flooding. We continue to enhance our strategies based on the feedback we get.”

The Airports Commission is currently assessing the case for growth of Heathrow or Gatwick.

“As well as bringing 50,000 new jobs and 10,000 apprenticeships, we can also improve the environmental landscape around the airport and mitigate some of today’s problems including road congestion and flooding. We continue to improve our plans based on the feedback we receive.”

The Airports Commission is currently assessing the case for expansion of either Heathrow or Gatwick.

SPECIFICATIONS OF THE JKUAT INCINERATOR
It should  be  a three chambered incinerator 
The load capacity of 250 kg
The housing for the incinerator should be able to withstand the temperatures and other operational requirements.
The chimney should have a strong refractory lining of special type of cement to withstand temperatures more than 1200oc.
It should have a strong base for the machine to keep it stable, firm and secure during its operational lifespan.
The primary (combustion) and the secondary (scorching) chambers to be fitted with burners for effective combustion.
In the third chamber, scrubbers and precipitators will need to be installed as pollution control equipment before emission of gases into the atmosphere.
A system for continuous emission Monitoring and Environmental Monitoring.
A mechanism with which to treat the waste water before discharge into the sewerage system.
Temperature control and monitoring devices (probe thermometer) should be availed to ensure that the right temperatures are attained in the chambers during operation.
Motor (fans) sufficient to induce enough air into the combustion chambers and direct the gases towards the flue 9 chimney).
High power electricity and emergency generator connection for automated ignition purposes.
The chimney should be tall enough and be at least one meter above the tallest building in the vicinity.
The fuel tank (industrial diesel) to be constructed next to but out side the incinerator housing for security purposes and to prevent fire hazards. Capacity of 250.
Other Requirements
Training of all the personnel involved in health care waste (HCW) management.
The Automatic Feeding system of the Incinerator
Automatic waste loading mechanism with conveyor belts. These will lead the waste into the first primary chamber.
An Automatic bottom ashes discharge system.

محرقة طبية

معلومات أساسية.

نموذج رقم: الصانع من محرقة النفايات الخطرة الصين
مصادر السحب: معالجة النفايات الصلبة
طرق المعالجة: الاحتراق
أسواق التصدير: عالمية

وصف المنتج

تحليلات السوق الدولية لمحرقة النفايات
يعطيك. 10 يونيو 2012
تنزيل: تنسيق Word / تنسيق PDF

الكلمة الرئيسية:
محارق صغيرة
محرقة نفايات طبية
محرقة حرق جثث الحيوانات الأليفة
الشركات المصنعة للمحرقة

المحرقة عبارة عن معدات حرق ، نفايات حريق مباشر بواسطة وقود الغاز أو وقود عالي الجودة. كطوق مختلف ، يمكن تسمية المحرقة بالعديد من الكلمات على النحو التالي:

قدرة المعالجة: محرقة صغيرة الحجم ، محرقة واسعة النطاق وبانت حرق.
مواد النفايات: محرقة النفايات البلدية ، محرقة النفايات الطبية ، محرقة جثث الحيوانات ، محارق الجثث البشرية
وقود المحرقة: محرقة الغاز ، محرقة الزيت
تحويل النفايات إلى طاقة (WTE): محرقة WTE ، محرقة لا تستخدم WTE
الشركة المصنعة للمحرقة: الشركة المصنعة للمحرقة في الصين ، الشركة المصنعة للمحرقة في المملكة المتحدة ، الشركة المصنعة للمحرقة بالولايات المتحدة الأمريكية ، الشركة المصنعة للمحرقة في الهند.
الشركة المصنعة للمحرقة الشهيرة: Inciner8 (UK) ، Clover Incinerator (الصين) ، Pennram (الولايات المتحدة الأمريكية) ، Haat (الهند)
معدل الحرق: 5 كجم / ساعة ، 10 كجم / ساعة ، 15 كجم / ساعة ، 20 كجم / ساعة ، 30 كجم / ساعة ، 50 كجم / ساعة ، 100 كجم / ساعة ، 150 كجم / ساعة ، 300 كجم / ساعة ، 500 كجم / ساعة ساعة

تقنية الترميد بالتحلل الحراري هي طريقة تقليدية لمعالجة النفايات لسنوات عديدة. في جميع أنحاء العالم ، في العديد من البلدان ، يقوم الناس بمقاومة المحارق لأن المحرقة ستنتج ديوكسين كبير في الدخان. يشير مصطلح “الديوكسينات” إلى مجموعة من المركبات الكيميائية السامة التي تشترك في بعض التركيبات الكيميائية والخصائص البيولوجية. مصنعي محارق النفايات الطبية المتنقلة في الصين ، محارق النفايات المتنقلة ، محارق النفايات المتنقلة إلى طاقة الصين ، النموذج: Yz-20 محرقة ، رخوة 30 ياردة. محارق الحرق ، يمكن إطلاق الديوكسينات في البيئة من خلال حرائق الغابات ، وحرق القمامة في الفناء الخلفي ، وبعض الأنشطة الصناعية ، والمخلفات من الحرق التجاري السابق للنفايات. تتحلل الديوكسينات ببطء شديد ولا تزال الإطلاقات السابقة من الديوكسينات من مصادر طبيعية ومن صنع الإنسان موجودة في البيئة. على أي حال ، يجب أن نذكر أن هذا هو بانت حرق على نطاق واسع ، بشكل عام أكثر من 30 طنًا في اليوم. هذه مشكلة اجتماعية ، لتحليل واقتراح طرق في زوايا مختلفة من الجمهور ، والحكومة ، والتنمية الاقتصادية ، وحماية البيئة ، وتطوير التكنولوجيا ، إلخ.

إذن ، لماذا ما زلنا نستخدم المحرقة؟
أولاً ، بالنسبة للنفايات الطبية من المستشفى ، فإن المحارق الحرارية هي أفضل علاج حتى الآن. تكنولوجيا الانحلال الحراري يمكن أن تقتل الفيروس ، والسيطرة على التلوث.
ثانيًا ، بالنسبة لجسم الإنسان والحيوان الأليف ، في العديد من البلدان والمناطق ، نرغب في حرق الجثث. هذا هو الحفل في مسيرة تنمية المجتمع ، واحتفالات تخليد ذكرى اختفاء الحياة.

على النحو الوارد أعلاه ، وليس فقط أعلاه ، ما زلنا نستخدم المحارق.

كيف يمكنك العثور على محرقة معقولة لموقعك المحلي؟
المحرقة ليست من المعدات الرخيصة ، وعمومًا يكون سعر النموذج الصغير حوالي 5 آلاف دولار أمريكي لكل وحدة وسعر نموذج كبير الحجم يزيد عن 50 ألف دولار أمريكي لكل وحدة. لذلك ، قبل شراء وحدة حرق واحدة ، عليك توضيح العناصر التالية:
ا ، احرق ماذا؟ المحرقة عبارة عن معدات حرق ، وظيفتها هي نفايات الحريق. إذن ما نوع النفايات التي تريد معالجتها؟
B ، صغير أم كبير؟ هذا وفقًا لإخراج النفايات كل يوم أو حجم النفايات لكل وقت تغذية ، مثل حجم الحيوان.
ج ، الوقود؟ تستخدم المحرقة وقود الزيت أو الغاز ، بشكل عام ، وقود الغاز أرخص من الزيت ومنظف الدخان من طراز الوقود النفطي. لكن بعض المواقع المحلية ليس لديها نظام إمداد بالغاز.
وعناصر تقنية أخرى ، مثل الطاقة (220 فولت ، 380 فولت) ، نوع باب تغذية النفايات ، هيكل المحرقة ، إلخ.

بعد توضيح ذلك ، يمكنك الذهاب للعثور على مصنّعين محليين أو دوليين ، يطلبون الأسعار والمواصفات الفنية ثم شراء المنتجات المناسبة في النهاية.

كتبه نيكي

العناصر / النموذج YD-30 YD-50 YD-100 YD-150
معدل الحرق (كلغ / ساعة) 30 كجم / ساعة. 50 كجم / ساعة. 100 كجم / ساعة. 150 كجم / ساعة.
سعة العلف (كلغ) 60 كجم 150 كجم 200 كجم 300 كجم
وزن المعدات 2300 كجم 4000 كجم 4300 كجم 7000 كجم
الغرفة الأساسية (لتر) 360 900 1200 1500
الحجرة الثانوية (لتر) 200 200 500 500
الأبعاد الخارجية (سم) 145 × 90 × 175 200 × 160 × 230 220 × 180 × 360 240 × 170 × 380
الأبعاد الداخلية (سم) 100 × 60 × 60 120 × 90 × 85 130 × 100 × 90 150 × 100 × 96
خزان الزيت (لتر) 200 300 300 500
فتح الباب (سم) 48 × 60 62 × 80 55 × 80 59 × 81
مدخنة (م) 5 5 10 10
نوع المدخنة ستانلس ستيل ستانلس ستيل ستانلس ستيل ستانلس ستيل
الغرفة الثانوية نعم نعم نعم نعم
غرفة الاحتراق المختلط نعم نعم نعم نعم
غرفة مرشح الدخان نعم نعم نعم نعم
وقود الاحتراق النفط / الغاز النفط / الغاز النفط / الغاز النفط / الغاز
وقت الإقامة 2.0 ثانية. 2.0 ثانية. 2.0 ثانية. 2.0 ثانية.
مراقبة درجة الحرارة نعم نعم نعم نعم

اتصل الآن هاتف: + 86-25-8461 0201

HICLOVER brand is holder of Nanjing Clover Medical Technology Co.,Ltd. we are incinerator manufacturer in china and we made waste incinerator for medical waste, pet cremation, animal incineration and other solid waste treatment. HICLOVER is famous incinerator manufacturer all over the world and our incinerators sale to many countries.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm
No. of burners: 2 Nos. (1 No. in Primary Chamber and 1No. in Secondary Chamber)
Type: Monoblock fully automatic
Fuel: Diesel
Fuel Oil Storage Tank:
Shall provide suitable capacity of oil storage tank.
Material of Construction: Mild steel.
Facility for visual checking of fuel shall be there.
It shall have diesel consumption monitoring system.
It shall come with diesel oil level indicator, piping with valves & N.R. valve.
Control Panel:
Type: Manual & Automated PLC based control panel with printer & recording device.
Material of Construction: CRCA sheet
It shall have digital temperature controller.
Epoxy powder coated washable paint finish.
It shall have audio-visual alarm system.
Chimney of 30 meters Height:
Material of Construction: Mild Steel
It shall be self-supporting type.
Height shall be 30 meters from ground level.
Paint The chimney is painted externally with two coats of heat resistant aluminum paint
Shall provide ladder till the top.
It shall have 3mm thick rubber lining from inside for protection.
It shall come with aviation lamp, lightening arrestor, stack, drain, inspection platform, sampling
port.
Consumption certificate:
The bidder must submit diesel consumption for a daily operation of 6 hours.
Turnkey:
Prices offered shall be inclusive of all civil works, electrical requirements including cabling and
switches required for installation & commissioning of the equipment.
Bidder shall submit detail drawings, design, and layout plan of civil works.
The bidder shall submit the details of BOQ of civil and electrical works.
Accessories, spares and consumables
All standard accessories, consumables and parts required to operate the equipment, including
all standard tools and cleaning and lubrication materials, to be included in the offer. Bidders
must specify the quantity of every item included in their offer (including items not specified
above).
Operating Environment
The system offered shall be designed to store and to operate normally under the conditions of
the purchaser’s country. The conditions include Power Supply, Climate, Temperature,
Humidity, etc.
Power supply: 220-240 VAC, 50Hz single phase/400 C 420 VAC, 50Hz three phase as
appropriate fitted with appropriate plug. The power cable must be at least 3 meter in length.
Standards and Safety Requirements
It shall have approval of “Pollution Control Board” of purchaser’s country.
All mandatory approvals required for the installation and operation of incinerator shall be done
by the bidder.
Must submit ISO 9001 AND
CE or USFDA approved product certificate.
User Training
Must provide user training (including how to use and maintain the equipment).
Warranty
Comprehensive warranty for 2 years after acceptance.
Maintenance Service during Warranty Period
During the warranty period supplier must ensure preventive maintenance along with
corrective/breakdown maintenance whenever required.
Installation and Commissioning
The bidder must arrange for the equipment to be installed and commissioned by certified or
qualified personnel; any prerequisites for installation to be communicated to the purchaser in
advance, in detail.

Tinian solid waste: Where to go?

In assessing these options, the U.S. military held the assumption that the present dumpsite situated at Puntan Diablo on Tinian — the area where the Chinese team of investors is planning to develop in an integrated resort — will be closed and that a transfer station has been considered.

MARFORPAC environmental specialist Sherri Eng said the dumpsite is not something that the military will have the ability to use.

Just by looking at the requirements and the benefits of the options researched, Eng said that the simplest are the off-island disposal.”

In choosing the off-island disposal alternative, the parties might need to check in the capacity of the Marpi landfill to adapt the waste coming from Tinian — both military and civilian waste.

Eng, at a meeting with the regional regulatory agencies and officials walked them through the three systems being considered.

Choice 1: Incineration

Eng said the system that calls for the use of incinerator or waste-to-energy system requires a”properly sized incinerator,” fenced site, ash landfill, wastewater disposal, trained operators and secondary disposal site for C&D or construction and demolition waste, green waste, recyclables and white goods.

She stated that this system could cause significant waste reduction and energy production.

However, there are challenges to be met: siting and permitting, maintaining consistent operations, the demand for waste and sorting monitoring, high first cost, high maintenance cost and deadline for building.

“Construction timeline is long. It’s not something that we can install tomorrow,” said Eng.

Department of Public Works Secretary Martin C. Sablan said about the CNMI getting an incinerator that it never used owing to the difficulty of permitting through the regulatory agencies.

Choice 2: Fukuoka Landfill

The Fukuoka landfill is a fresh approach to managing solid waste. It’s a semi-aerobic landfill with a leachate gathering pipe set up in the landfill floor that drains the leachate into a treatment facility.

This method does not expect a synthetic liner.

But if that were to be chased, Tinian will need an additional 15 hectares and the use of specific structure material.

The MARFORPAC agents said they have conducted research on this method.

It had been done in Palau, Yap and American Samoa but nowhere else in the continental United States due to permitting.

“We must find some kind of waiver,” said Eng mentioning that it is not a permitted system in the U.S.

But with Fukuoka method, there is a capability to convert the existing dumpsite on Tinian.

As for leachate, the military is contemplating to upsize its waste water treatment facility to adapt this if this were the option to think about.

As the Fukuoka landfill will need clay, Eng said their study showed the deficiency of the material on Tinian; nonetheless it was indicated there’s a source in Papago.

Choice 3: Off-island Entry

This alternative proposes to use the existing Marpi landfill.

With this option, Eng stated there will be no additional land requirements.

She explained that this centralizes waste management system on Saipan.

But Eng was quick to point out that among the challenges will be how to manage the perception that Saipan becomes a dumping ground.

The military also sees the necessity to upgrade shipping infrastructure.

“We are willing to accept military waste,” said DPW Secretary Martin C. Sablan.

He explained they had excavated the floor to construct the next cell of the landfill facility.

With this option, Eng assured that”whatever we do, we’re likely to take the Tinian waste .”

Asked by DPW if the military were to foot the bill for shipping and transport of this waste, Eng stated,”We consent to discover the solution and hope to obtain the solution.” She explained she could not commit to anything.

Sablan said it’ll charge less for the military to bring their waste to Saipan but the municipality will be needing assistance.

Eng remarked that the options has to be brought down to 2.

“I do not believe we’ve got the time and money to do all three,” she explained.

Transport channel is key

As they mulled the prospective solutions to Tinian’s solid waste problems, Eng stated it is supposed that there’ll be a transfer channel.

“Transport channel is important in all these sytems,” she explained.

Closure of this dumpsite

Tinian Mayor Ramon M. Dela Cruz pointed out It Is not the responsibility of the developer to close the Present dumpsite in Puntan Diablo.

He, however, stated that Alter City has dedicated to providing around $5 million in assistance.

Asked by CIP’s Elizabeth Balajadia if they might continue to utilize the dumpsite for five more years, Tinian Mayor’s Office chief of staff Don Farrell stated”five years is too long.”

Mayor Dela Cruz stated three years would be fair.

“That will permit the developer to work on the adjacent property,” he explained.

Alter City Group is proposing to build a golf course in the present site of the dumpsite.

Alter City dedicated to help

In a hearing prior to the CNMI legislature last week, Alter City’s legal counsel Rober Torres stated,”Investor is prompted to help in its elimination.”

Mayor Dela Cruz said three years would be reasonable.

“That will allow the developer to work on the adjacent property,” he said.

Alter City Group is proposing to build a golf course at the current site of the dumpsite.

Alter City committed to assist

At a hearing before the CNMI legislature last week, Alter City’s legal counsel Rober Torres said, “Investor is motivated to assist in its removal.”
But he said the government too has to pitch in.
by: http://www.mvariety.com/special-features/business-edge/70491-tinian-solid-waste-where-to-go

incinerator china, call hiclover brand(www.hiclover.com).  Nanjing Clover Medical Technology Co.,Ltd. is top incinerator supplier in china and supply single combustion chamber, double combustion chambers, three combustion chambers and multi-combustion chambers waste incinerators.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm
Mobile Incinerator Burn Rate 50kg/h minimum
Burn Rate 50kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber

Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 1200 °C, please indicate
One year Spare Parts Package for complete maintainability

محارق النفايات من نفايات الصين والمحارق

وصف المنتج

المحرقة عبارة عن معدات حرق ، نفايات حريق مباشر بواسطة وقود الغاز أو الوقود النفطي. كطوق مختلف ، يمكن تسمية المحرقة بالعديد من الكلمات على النحو التالي:

قدرة المعالجة: محرقة صغيرة الحجم ، محرقة واسعة النطاق وبانت حرق.
مواد النفايات: محرقة النفايات البلدية ، محرقة النفايات الطبية ، محرقة جثث الحيوانات ، محارق الجثث البشرية
وقود المحرقة: محرقة الغاز ، محرقة الزيت
تحويل النفايات إلى طاقة (WTE): محرقة WTE ، محرقة لا تستخدم WTE
الشركة المصنعة للمحرقة: الشركة المصنعة للمحرقة في الصين ، الشركة المصنعة للمحرقة في المملكة المتحدة ، الشركة المصنعة للمحرقة بالولايات المتحدة الأمريكية ، الشركة المصنعة للمحرقة في الهند.
الشركة المصنعة للمحرقة الشهيرة: Inciner8 (UK) ، Clover Incinerator (الصين) ، Pennram (الولايات المتحدة الأمريكية) ، Haat (الهند)
معدل الحرق: 5 كجم / ساعة ، 10 كجم / ساعة ، 15 كجم / ساعة ، 20 كجم / ساعة ، 30 كجم / ساعة ، 50 كجم / ساعة ، 100 كجم / ساعة ، 150 كجم / ساعة ، 300 كجم / ساعة ، 500 كجم / ساعة

تقنية الترميد بالتحلل الحراري هي طريقة تقليدية لمعالجة النفايات لسنوات عديدة. في جميع أنحاء العالم ، في العديد من البلدان ، يقوم الناس بمقاومة المحارق لأن المحرقة ستنتج ديوكسين كبير في الدخان. يشير مصطلح “الديوكسينات” إلى مجموعة من المركبات الكيميائية السامة التي تشترك في بعض التركيبات الكيميائية والخصائص البيولوجية. الشركات المصنعة للمحارق البيئية في الصين ، محارق جثث الخيول الصينية ، محارق الصين للبيع ، شركة المحارق الصينية ، النموذج الدوار الصيني المحارق yd 500 ، يمكن إطلاق الديوكسينات في البيئة من خلال حرائق الغابات ، وحرق القمامة في الفناء الخلفي ، وأنشطة صناعية معينة ، وبقايا من الماضي حرق النفايات التجارية. تتحلل الديوكسينات ببطء شديد ولا تزال الإطلاقات السابقة من الديوكسينات من مصادر طبيعية ومن صنع الإنسان موجودة في البيئة. على أي حال ، يجب أن نذكر أن هذا هو بانت حرق على نطاق واسع ، بشكل عام أكثر من 30 طنًا في اليوم. هذه مشكلة اجتماعية ، لتحليل واقتراح طرق في زوايا مختلفة من الجمهور ، والحكومة ، والتنمية الاقتصادية ، وحماية البيئة ، وتطوير التكنولوجيا ، إلخ.

إذن ، لماذا ما زلنا نستخدم المحرقة؟
أولاً ، بالنسبة للنفايات الطبية من المستشفى ، فإن المحارق الحرارية هي أفضل علاج حتى الآن. تكنولوجيا الانحلال الحراري يمكن أن تقتل الفيروس ، والسيطرة على التلوث.
ثانيًا ، بالنسبة لجسم الإنسان والحيوان الأليف ، في العديد من البلدان والمناطق ، نرغب في حرق الجثث. هذا هو الحفل في مسيرة تنمية المجتمع ، واحتفالات تخليد ذكرى اختفاء الحياة.

على النحو الوارد أعلاه ، وليس فقط أعلاه ، ما زلنا نستخدم المحارق.

كيف يمكنك العثور على محرقة معقولة لموقعك المحلي؟
المحرقة ليست من المعدات الرخيصة ، وعمومًا يكون سعر النموذج الصغير حوالي 5 آلاف دولار أمريكي لكل وحدة وسعر نموذج كبير الحجم يزيد عن 50 ألف دولار أمريكي لكل وحدة. لذلك ، قبل شراء وحدة حرق واحدة ، عليك توضيح العناصر التالية:
ا ، احرق ماذا؟ المحرقة عبارة عن معدات حرق ، وظيفتها هي نفايات الحريق. إذن ما نوع النفايات التي تريد معالجتها؟
B ، صغير أم كبير؟ هذا وفقًا لإخراج النفايات كل يوم أو حجم النفايات لكل وقت تغذية ، مثل حجم الحيوان.
ج ، الوقود؟ تستخدم المحرقة وقود الزيت أو الغاز ، بشكل عام ، وقود الغاز أرخص من الزيت ومنظف الدخان من طراز الوقود النفطي. لكن بعض المواقع المحلية ليس لديها نظام إمداد بالغاز.
وعناصر تقنية أخرى ، مثل الطاقة (220 فولت ، 380 فولت) ، نوع باب تغذية النفايات ، هيكل المحرقة ، إلخ.

بعد توضيح ذلك ، يمكنك الذهاب للعثور على مصنّعين محليين أو دوليين ، يطلبون الأسعار والمواصفات الفنية ثم شراء المنتجات المناسبة في النهاية.

العناصر / النموذج TS10 (PLC) TS20 (PLC) TS30 (PLC) TS50 (PLC) TS100 (PLC)
معدل الاحتراق 10 كجم / ساعة 20 كجم / ساعة 30 كجم / ساعة 50 كجم / ساعة 100 كجم / ساعة
سعة الأعلاف 20 كجم 40 كجم 60 كجم 100 كجم 200 كجم
وضع التحكم PLC PLC PLC PLC PLC
غرفة الاحتراق 100 لتر 210 لتر 330 لتر 560 لتر 1200 لتر
خفض الماوس لعرض الإجابة 50x50x40 سم 65x65x50 سم 75x75x60 سم 100x80x70 سم 120x100x100 سم
الغرفة الثانوية 50 لتر 110 لتر 180 لتر 280 لتر 600 لتر
غرفة مرشح الدخان نعم نعم نعم نعم نعم
وضع التغذية يدوي يدوي يدوي يدوي يدوي
الجهد االكهربى 220 فولت 220 فولت 220 فولت 220 فولت 220 فولت
قوة 0.5 كيلو واط 0.5 كيلو واط 0.5 كيلو واط 0.7 كيلو واط 0.7 كيلو واط
استهلاك الزيت (كجم / ساعة) 5.4 – 12.6 7.8 – 16.3 10.2 – 20 12.1 – 24 14 – 28
استهلاك الغاز (م 3 / ساعة) 6.2-11.4 8-15.7 9.8 – 20 9.9 – 26.1 10 – 32.2
مراقب درجة الحرارة نعم نعم نعم نعم نعم
حماية درجة الحرارة نعم نعم نعم نعم نعم
خزان النفط 100 لتر 100 لتر 100 لتر 100 لتر 200 لتر
باب التغذية 30×30 سم 45×40 سم 55×50 سم 70×55 سم 80×60 سم
مدخنة 3 متر 3 متر 5 متر 5 متر 10 أمتار
نوع المدخنة ستانلس ستيل ستانلس ستيل ستانلس ستيل ستانلس ستيل ستانلس ستيل
وقت الإقامة 2.0 ثانية. 2.0 ثانية. 2.0 ثانية. 2.0 ثانية. 2.0 ثانية.
الوزن الإجمالي 1500 كجم 2200 كجم 3000 كجم 4500 كجم 6000 كجم
الابعاد الخارجية 140x90x120 سم 160x110x130 سم 175x120x140 سم 230x130x155 سم 260x150x180 سم

اتصل الآن هاتف: + 86-25-8461 0201