Tag: Blog

Items/Model	TS50(PLC)
Picture
Principle	Solid Waste Incineration
Burn Rate	30-45 kg/hour
Control Mode	PLC(Programmable Logic Controller Incinerator)
Combustion Chamber	560L
Internal Dimensions	100x80x70cm
Secondary Chamber	280L
Smoke Filter Chamber	Yes
Feed Mode	Manual
Voltage	220V
Oil Consumption (kg/hour)	Average 13.3
Gas Consumption (m3/hour)	***
Temperature Monitor	Digital Display
Temperature Protection	Yes
Oil Tank	800L
Feed Door	70x55cm
Chimney	5Meter
Chimney Type	Stainless Steel
1st. Chamber Temperature	800℃–-1000℃
2nd. Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Gross Weight	4500kg
External Dimensions	230x130x155cm

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

Items/Model	TS100(PLC)
Picture
Principle	Waste Incineration Treatment
Burn Rate	60-80 kg/hour
Control Mode	PLC(Programmable Logic Controller Incinerator)
Combustion Chamber	1200L
Internal Dimensions	120x100x100cm
Secondary Chamber	600L
Smoke Filter Chamber	Yes(Dry Scrubber)
Feed Mode	Manual
Voltage	220V
Oil Consumption (kg/hour)	Average 20.4
Gas Consumption (m3/hour)	***
Temperature Monitor	Digital Display
Temperature Protection	Yes
Oil Tank	1100L
Feed Door	80x60cm
Chimney	10Meter
Chimney Type	Stainless Steel
1st. Chamber Temperature	800℃–-1000℃
2nd. Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Gross Weight	6000kg
External Dimensions	260x150x180cm

The requirement is for a pyrolytic double-chamber incinerator. The incinerator shall be capable of using diesel 

fuel as a supplemental fuel oil.

It should incorporate an Air Pollution Control (APC) System suitable for basic emission control.

The proposed incinerators shall be appropriate for critical harsh environmental conditions, suitable for rapid 

deployment, and different climate zones (e.g. desert, tropical country, mountain, etc.) in which there are several 

variations of the relative natural forces (e.g. temperature, humidity, wind, etc.) for a minimum period of 10 years 

if the specified maintenance schedule is followed.

The incinerators should be supplied assembled, whenever possible, and all parts and components should be 

packaged on pallets in order to be transported via road, air (via helicopters or air-cargoes, e.g. MI8 or C130) 

and via sea in a 20’ ISO sea shipping containers.

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

Items/Model	TS500(PLC)
Picture
Principle	Waste Incineration Treatment
Burn Rate	150-200 kg/hour
Control Mode	PLC(Programmable Logic Controller Incinerator)
Combustion Chamber	2700L
Internal Dimensions	190x120x120cm
Secondary Chamber	1300L
Smoke Filter Chamber	Yes
Feed Mode	Manual
Voltage	220V
Oil Consumption (kg/hour)	Average 28
Gas Consumption (m3/hour)	***
Temperature Monitor	Digital Display
Temperature Protection	Yes
Oil Tank	1400L
Feed Door	90x80cm
Chimney	10Meter
Chimney Type	Stainless Steel
1st. Chamber Temperature	800℃–-1000℃
2nd. Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Gross Weight	15000kg
External Dimensions	400x210x300cm(without chimney)

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The minimum combustion temperature of the primary chamber should not be less than 850°C;

The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.

The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.

The following conditions should be met in the secondary combustion chamber:

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;

The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;

The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;

The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

Model	YD-100
Picture
Burning Rate	100-150 kgs/hour
Primary Combustion Chamber	2000 Liters
Secondary Combustion Chamber	500 Liters
Feed Mode	Manual
Voltage	220V/380V
Power	2.5Kw
Fuel Type	Diesel Oil
Burner	Italy Original
Oil Consumption (Diesel Oil)	Average 28 kg/hour
Gas Consumption (Natural Gas)	***
Internal Dimensions	180x115x98 cm (primary chamber)
External Dimensions	270x185x280cm (without chimney)
Temperature Monitor	Yes
Oil Tank Capacity(if oil fuel)	200 Liters
Door Opening	55 x 80cm
Chimney Length	6.0 Meters
Chimney Type	Steel
Equipment Gross Weight	9000 kgs
Operation Technical Specifications
Primary Chamber Temperature	800℃–-1000℃
Secondary Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Burning Efficiency	＞98%
Waste Lower Calorific Power	3500Kcal