Archive: February 28, 2025

Waste Incineration Therapy BURNING PRICE: 100-150kgs per hr HICLOVER TS150

BURNING RATE: -100 -150 kgs per hour

MINIMUM OPERATING TEMPERATURE: 800-1000 oC (PRIMARY BURNING)

MAX OPERATING TEMPERATURE LEVEL: 1000-1200 oC (AFTER HEATER BURNING)

SECONDARY MELTING CAPABILITY: COMPULSORY

DENSITY INSULATION: 50 mm high

Refractory capability: minutes 114mm

STURDY REFRACTING LINING TO WITHSATND 17500C

AVEARGE BURN OUT TIME: MAXIMUM 3HRS

GAS TYPE: FUEL OIL (DIESEL)

FUEL INTAKE IN LTRS/HR: average 14

RESIDNECY TIME IN SECONDARY CHAMBER: 2 PHASES

Items/Model

TS150( PLC)

Photo

Concept

Waste Incineration Treatment

Burn Price

Standard 100-150 kg/hour

Feed Capability

Standard 750kg/feeding

Control Setting

PLC( Programmable Reasoning Controller Incinerator)

Chamber Material

High Alumina Fire Brick Wall, 1750 ℃ Rate

Paint for outdoors face

800 ° C Price

Burning Chamber

1570L

Inner Dimensions

150x100x105cm

Secondary Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Guidebook

Voltage

210/230V 50/60Hz

Power

0.9 Kw

Oil Consumption (Liter/hour)

Ordinary 14( D.O)

Gas Intake (m3/hour)

***

Temperature Screen

Digital Show

Temperature Level Defense

Yes

Oil Tank

2000L

Feed Door

80x60cm

Chimney

10Meter

Smokeshaft Kind

Stainless Steel

1st. Chamber Temperature

800 ℃–– -1000 ℃

second. Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

Exterior Dimensions

300x160x280cm( without chimney)



HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-28

Inciner



Basic Info.

Export Markets:Global

Additional Info.

Trademark:nanjing clover
Origin:Nanjing Clover

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to oil incinerators, oil sludge burner, oil sludge mobile incinerator, oily sludge incineration combustion, onsite remote medical waste system, 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below: 

Treatment capacity: Small scale incinerator, large scale incinerator and incineration pant. 

Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators 

Incinerator fuel: Gas incinerator, oil incinerator 

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 

Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer. 

Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 

Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

горелка крошечная для утилизации отходов инструмента

Карбюрант Дизель
Емкость (M3) 1.92
Средняя мощность 1200 кг
Консоммация (литр / литр 12
Внешнее измерение
Longueur (мм) 3110
Largeur (мм) 2150
Hauteur (мм) 3200
Ouverture Porte 1000 × × 2000.
Измерение междунар.
Longueur (мм) 2200.
Largeur (мм) 1050.
Hauteur (мм) 800. Работа. установка для сжигания мусора, предназначенная для утилизации около 150-200 городских отходов из торговых центров, офисов, а также бытовых отходов.

Большинство отходов содержат различные материалы: пластик, резину, бумагу, дерн, листья, древесину, фрукты, упаковочный картон и многое другое.

Минимальная температура эксплуатации 950.
Максимальная температура 1320.
Température de suivi oui.
Термостат oui.
Вентилятор oui.
Горящая вторая камера 2 сек.
Гарантия минимум 12 месяцев.
Карбюрантный дизель.
Емкость (M3) 1.18.
Вместимость 750 кг.
Консомация (л / ч) 6.
Внешнее измерение.
Longueur (мм) 3110.
Largeur (мм) 1800.
Hauteur (мм) 3300.
Ouverture Porte 770 × × 2000.
Измерение междунар.
Longueur (мм) 2100.
Largeur (мм) 700.
Hauteur (мм) 800.
Операция. Горелка для удаления отходов малого и среднего размера для 150-200 городских отходов из торгового центра, рабочего места, а также бытового.

Наиболее часто отходы включают в себя различные пластмассовые изделия, резину, бумагу, газон, листья, древесину, фрукты, тару для упаковки продуктов, а также некоторые другие.

Минимальная температура эксплуатации 950.
Оптимальная температура 1320.
Température de suivi oui.
Термостат oui.
Вентилятор oui.
Вторая камера сгорания, сек.
Гарантия минимум 12 месяцев на небольшой крематорий для домашних животных, дизайн и тарифы

HICLOVER Burner mobile little With Wheel as well as Brake

Version

YD-30 Mobile Type

Photo

Burning Rate

Average 30 kgs/hour

Feed Ability

Typical 60 kgs/feeding

Chamber Text

Stainless Steel

Mobile Feature

With Wheel and also Brake

Primary Burning Chamber

280 Liters

Secondary Combustion Chamber

150 Litres

Mix Burning Chamber

Yes

Feed Setting

Handbook

Voltage

220V

Power

1.5 Kw

Gas Kind

Diesel Oil

Burner

Italy Original

Oil Intake (Diesel Oil)

Standard 13.3 kg/hour

Inner Dimensions

80 x 60 x 60cm (main chamber)

Exterior Dimensions

125 x 90 x 260cm (without smokeshaft)

Temperature Level Display

Yes

Oil Container Capacity( if oil fuel)

100 Litres

Door Opening

50 x 50cm

Smokeshaft Size

2.0 Meters

Chimney Type

Stainless-steel

Equipment Gross Weight

1600 kgs

Operation Technical Specifications

Key Chamber Temperature

800 ℃–– -1000 ℃

Secondary Chamber Temperature

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Effectiveness

> 98%

Waste Lower Calorific Power

3000Kcal


HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-28

Costo de quema de 100-150 kg con una segunda quema para su uso en el centro de salud

Depósito de aceite con capacidad de 2000 litros

Artículos / Modelo

TS150 (PLC)

Imagen

Principio

Terapia de incineración de desechos

Velocidad de combustión

Requisito 100-150 kg / hora

Capacidad de alimentación

Estándar 750 kg / alimentación

Ajuste de control

PLC (quemador controlador de pensamiento programable)

Acero para texto

8 mm de espesor

Producto de la cámara

Superficie de pared de ladrillo refractario con alto contenido de alúmina, tasa de 1750 ℃

Pintura para cara exterior

Tasa de 800 ° C

Cámara de combustión

1570L

Medidas interiores

El 150x100x105cm

Cámara agregada

750L

Cámara de filtro de humo

Establecimiento de piensos

Guía

Voltaje

210 / 230V 50 / 60Hz

Energía

0,9 kilovatios

Consumo de aceite (litros / hora)

Normal 14 (DO)

Consumo de gas (m3 / hora)

***

Mostrar el nivel de temperatura

Presente digital

Protección de temperatura

Tanque de almacenamiento de aceite

300L

Puerta de alimentación

Los 80x60cm

Pozo de humo

10 metros

Tipo de humo

Acero inoxidable

1er. Grado de temperatura de la cámara

800 ℃ –– – – -1000 ℃

segundo. Grado de nivel de temperatura de la cámara

1000 ℃ -1200 ℃

Tiempo de residencia

2,0 seg.

Peso bruto

8500 kg

Medidas exteriores

300x160x280cm (sin humo)


Incineradores de residuos
Incinerador de desechos médicos
Cremación de animales domésticos
Residuo sólido   Incinerador

Tel: + 86-25-8461 0201
Móvil: + 86-13813931455 (whatsapp / wechat)
Sitio web: www.hiclover.com
Correo electrónico: [correo electrónico protegido]
Correo electrónico: [correo electrónico protegido]
Tecnología médica Co., Ltd. del trébol de Nanjing

Сжигатель медицинских отходов производительностью 20 кг / час с двойной горелкой

3 Установка для сжигания медицинских отходов производительностью 20 кг / час с двойной горелкой. Системы сжигания медицинских отходов. Интересно испортить около 200 кг продолжает быть. Работа медицинского горелки для Тегеранского района. Наша цель – создать завод по сжиганию медицинских отходов производительностью 50 тонн в день. горелка с производительностью горения 100 кг / час. Как и он должен работать с бензином, 2-х камерный. Управление отходами
Горелка
* Внешний размер у основания 6 футов 1,8 м.
* Внешний размер 4 1/2 фута 1,35 м.
* Внутренний диаметр у основания 3 фута 0,9 м.
* Внутренний размер на расстоянии 3 фута 0,9 м.
* Плотность поверхности стены у основания 18см.
* Толщина стенки 9см.
* Высота перпендикуляра стены 4 фута.
* Высота железных прутков от решетки над землей 1 фут

Требуемый материал.
* Взмах в бассейне.
* 5 или 6 железных стержней длиной 4 1/2 фута по 1,35 м каждый.
* Количество огромных камней для структуры.
* 2 пустые банки с керосином для проделывания вентиляционных отверстий.
* 2 литра каменноугольной смолы.
* 2 кисти.
* Конструкция глубиной 1 фут-1 1/2 фута вырыта.
* Заполнен крупными камнями, а также лужа со взмахом до уровня земли.
* Свободные банки из-под керо следует поставить прямо на место, где должны появиться вентиляционные отверстия.
* Стена высотой 1 фут построена со свистом бассейна.
* Железные прутья помещаются на место, оставляя пространство примерно 2–3 см между прутьями 4 фута 1,2 м.
* Стены гладкие, оштукатуренные. Повышение температуры для полного уничтожения загрязнений или опасностей.
Принцип пиролитического сгорания с бурением дымовых газов в камере дожигания.
Инсинератор, двухкамерный, 900 ° C / 1200 ° C, вместимостью 30 кг.
Снаряжение: 1 брикет для сжигания + 1 брикет для повторного сжигания + 1 дымящийся дым. Capacité de destroy horaire.
En poids: au moins 30 кг.
Объем En: au moins 200 литров.
Температура :.
Горение: 900 ° С. Горение изделия: 1200 ° С.
Puissance des brûleurs.
Сжигание: около 80 кВт.
Запись сообщения в блоге: 80 кВт.
Электрическая мощность: около 2 кВт.
Cheminée :.
Площадь: около 30 × 30 сантиметров.
Hauteur (минимум): au moins 8 мес.
Измерение порты: около 50X50 см.

Large Capability Pet Dog Cremation HICLOVER Version A1500 with E-Power Automobile. Door

Large Capacity Animal Pet Cremation HICLOVER Model A1500 with E-Power Auto. Door

Version

A1500

Inner Measurements

150 x 100 x 96cm

Suit for Animal

Pet cat – – yes

– Dog – yes

Pig – small

Cow – – tiny

Main Product Listing

Main Burning Chamber

Additional Burning Chamber

Mix-Combustion Chamber

Smoke Filter Chamber

Burner Control Case

Chimney:10.0 Meters

*( upgrade to Stainless-steel, cost-free price)

Italy oil/gas heater: 03 sets

Oil Tank (if oil fuel): 500Liters

Design for Pet Dogs Cremation Business

Movable system & & Auto. Door & Fire/Flame Monitoring Opening

Independent Placement for Tiny Pet Dog





















HICLOVER – Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-28

incinerador de mascotas

La planta incineradora incorporará un cuadro de control para su funcionamiento. En el panel de control tendremos un visual

visualización de las temperaturas de la cámara. Esta pantalla visual debe controlar y monitorear el incinerador y su desempeño.

La capacidad de destrucción en peso será de 60 kg / h.

Debe poder funcionar no menos de 10 horas / día.

Este incinerador debe poder destruir todos los residuos combustibles producidos por hospitales, clínicas privadas, laboratorios,

institutos, etc …

Especificación de diseño: tipos A, B, C, D y E de desechos médicos

Suministro, instalación y prueba de UNIDADES CON CONDUCTOS DIVIDIDOS en el depósito de residuos con capacidad suficiente para mantener la

temperatura a 14 grados centígrados en veranos e inviernos

Pet Crematorium



Basic Info.

Export Markets:Global

Additional Info.

Trademark:clover
Origin:Clover

Product Description

We want to refresh or change incinerator with new one the incinerator contain 3 units each unit 400kg/h, if u interest to make job with as pls contact me to send u drawing and details. (Baghdad ) 
Our hospitals require 3 X Medical Waste Incinerator Units (designed to 
Burn medical waste load capacity of 50kg/hr, with calorific values 
Ranging from 2, 300 kJ. Kg to 30, 000 kJ/kg at a designed thermal rate 
Of 1, 440, 000 kJ/hr. 
I was browsing through your website and noted that Model: YZ-50 or 
YD-50 might be the the desired (specified) incinerator unit. Please 
Find attached animal incinerators and other waste, animal incinerators and other waste. De, animal incinerators costs, animal incinerators manufacturers, animal incinerators price, our incinerator specifications. 
I kindly request you to send me a quotation of your Medical Waste 
Incinerator Units, detailed specs and features plus freight costs from 
Your location to Port Moresby, Papua New Guinea. 
MEDICAL WASTE INCINERATOR SPECIFICATIONS 
Capacity (4000 kg/day). 
The unit should have the following features: 
* Automatic feeding 
* Automatic ash / leftovers removal 
* Flue gas filtration system. 
* The technical & financial offer should include installation & testing and staff training. 
***The offer should be itemized. 
IMPORTANT INFORMATION: 
1. Emission standards: ( EU ) 
2. Waste type: Hazardous Medical Waste 
3. Approximate moisture content: Max. 30% 
4. Glass content: Max. 15% 
5. Building Roof Height: 8 meters 
6. Height of chimney above roof (required): At least 3 meters 
7. Fuel to be used: No. 2 ( diesel ) ( Fuel specifications attached ) 
8. Power: 380 V, 3 phase 
9. Space available inside the existing building: (Bidders should visit the building to choose the best location for installation coordinating with university engineers) 
10. Waste filled in (max. 70X120 cm ) polyethylene bags (Amman ) 
I am looking at purchasing 10-17 medical waste incinerators. Please could you give me your best price and latest catalogue for the following

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

эластичные и очень эффективные горелки с различной мощностью для больничных / медицинских отходов, кремации, а также различных других методов лечения сильных отходов

Одно- и двухкамерные медицинские инсинераторы. Долговечные и чрезвычайно надежные горелки с различной мощностью для больничных / медицинских отходов, кремации, а также различных других методов лечения сильных отходов.

Камера Dual

Скорость горения 10 кг в час (для двух инсинераторов)

Скорость горения 20 кг в час (для трех горелок)

Руководство по способу упаковки

Количество горелок Одинарная на 10 кг / час и двойная на 20 кг в час

Топливо Дизельное топливо, а также природный газ

Время разогрева Не более 20 минут

Регулятор температуры Цифровой

Блок питания одноступенчатый 220В

Высота дымового вала на высоте 20 футов от уровня земли

· 50 кг в час

· Возможность для клинических отходов.

Своего рода
Одиночный камерный круглый

Кормовой продукт
Документы, Контейнеры для отходов

Возможность
1000 кг / день

Емкость горения
125 кг / час

Стандарты компоновки
Обычно соответствует стандартам IS

Вид процедуры плавки
Система нулевого газа

Горящая камера

Своего рода
Цилиндрический

Измерение
1,25 м в диаметре (приблизительно) x 1,2 м над уровнем моря (приблизительно)

Температурный уровень
400–600 ° С

MOC
Хромированная легированная сталь, внутренняя облицовка огнеупорным кирпичом / керамической глиной

Внешняя подкладка
Термостойкая подкладка

КУЧА

Тип
Самостоятельный

MOC
РС

Аксессуары
Открытие порта, а также лестница для тестирования выхлопных газов с полной онлайн-системой трения, термостатом

Системы будут использоваться для наших клиентов в полевых условиях. Эти лагеря различаются по численности от 20 до 200 человек. На каждом веб-сайте есть медицинский центр, хотя для клинического использования это действительно мало.