Archive: July 17, 2024

Горелка для бытовых отходов, 50 кг / час, ирак, с 2 камерами горения

Предметы / Модель

TS50M

Изображение

Цена расплава

Обычно 50 кг / час

Возможность подачи

В среднем 50-150 за кормление

Режим управления

ПЛК (Инсинератор с программируемым логическим контроллером)

Камера сгорания

450 л

Внутренние измерения

75x75x80 см

Дополнительная камера

225л

Камера дымового фильтра

да

Режим подачи

Ручное кормление

Напряжение

220В

Мощность

0,5 кВт

Расход масла (кг / час)

Среднее значение 13,3

Использование газа (ПГ, м3н / час)

В среднем 16

Расход газа (LPG, м3 / час)

Типичный 11,7

Отображение уровня температуры

4 Цифровой Дисплей

Температурный уровень защиты

да

Резервуар для хранения масла

100л

Дверца подачи

55×50см

Камин

8 метров

Тип дымового вала

Нержавеющая сталь

1-й. Температура камеры

800 ℃ –– -1000 ℃

второй. Температура камеры

1000 ℃ -1200 ℃

Время проживания

2.0 сек.

Вес брутто

4500кг

Внешние размеры

175x120x140 см

health care risk waste and general waste incinerator

We strive for a sustainable development therefore we are adopting a sustainable medical waste management system, which includes building a modern sustainable incinerator that will not only cater for our facility but also for the other facilities in the larger area of the region. We are aware that we need a  modern incinerator that will not burden the local people or the local environment even more. There are several different types of incinerators available (especially recommended to be built with local materials), which are cheap to build but are more harmful to people and environment.slaughterhouse in Afghanistan in ministry of agriculture. Each plant has capacity of 100 cattle and 500 sheep per day.burn dead chicken of weight 50 kg.4.Waste  type :   health care risk waste and general waste
5. Chimney stack:
Chimney : 3.5mm mild steel
Height from base :11m and if there are buildings within
30m of the incinerator, chimney must extend at least 3m
above the apexes of all the roof of such buildings
Diameter of chimney at top :430mm
Weight of stack:  ±500 Kg
Case and stack be painted with 400⁰C heat resistant Black paint
6.Burners:
1st  chamber 850⁰C  – 900⁰C
2nd  chamber 1000⁰C
7.Variable speed combustion air blowers
8.Primary chamber volume  ±1.05 cubic metres
9.Mixing chamber volume  ±0.30 cubic metres
10.Settling chamber volume ±0.89 cubic metres
11.Weight excluding chimney  ±6.400Kg at manufacture
12..Firing tools supplied :Hoe ,poker and rake
13.Dimensions
Length                   ±2125mm
Width                    ±1890mm
Height                   ±2125mm
Extra width for burners ± 1000mm
14.Loading door opening 610 *540mm
15.Hearth area  ±1.19square metres
16.Description of grate/hearth :A full hearth to be supplied to prevent contaminated
17.Liquids from flowing into ash pit without being incinerated
18.Compliance with South African Atmospheric Pollution Prevention Act No.45 of
1965 or equivalent air pollution standards
19.Documents to be supplied :Operations and maintenance manual and standard
operating procedures (SOPs)
20. Emission controls:
heated refractory screen
Low velocity grit settling chamber
Stainless steel arrester screen

21.Refractory material :alumina content> 49% and thickness average 102mm
22.Bake out : to be done over 2-3 days
23.Materials of constructions
Case :5mm mild steel
Bracing: heavy angle and channel
Hearth: 1550 ⁰C
Ashing door: high grade cast iron
Loading door 5mm mild steel lined with 1550 ⁰C castable general purpose high strength, high abrasion resistant monolithic refractory concrete.
Incinerator walls and roof: 1550 ⁰C castable monolithic refractory

nanjing clover incinerator price


Significant incinerators – – – – INDUSTRIAL INCINERATORS – – – specifications listed below.

2.) Measurement requirement for the heaters is 750 — — — — 850 kg ability

3.) The bum price require to be 80 LL 100 kg/ hour.

4) The key chamber shouId have an operating temperature level of 900 -1200 degree C.

5) The incinerator should despise a heat 2nd chamber along with 2 second gas
retention time at 850- 1150 degree C so that it appropriates for high risk materials.

6). The incinerator needs to have temperature degree surveillance and also thermostat control for simplicity of
procedure as well as also warranty of lower temperature to confirm ideal treatment.

7). The heater should can shedding any one of the contaminateds materials detailed in the
subsequent location.

8) The burner need to can burning diesel oil and additionally need to consist of a bigger gas
container (10-500 litres) as well as likewise generator (3 –– – – 40 kV) developed that can be carried on the trailer with the
incinerator to see to it that the device needs no exterior electrical power supply.

9.) The heater requires to be trailer installed to ensure that it is a po

Infected products to be Blazed

Hazardous strong chemical:

Various types of flammable solids, used fabrics, oil, along with toner cartridges, chemicals
for water filtration as well as picture consumables and also plastic item, vacant
plastic/metal containers that still have residue hazardous product, oil absorbing.

Damaging fluid chemical:

Normally different kinds. of Acid, Paint, Varnish, Acetone, White Spirit Aromatic-less
Solvents, Artificial Fluid for Break Solutions, Aircraft De-icing Fluid, Hydraulic as well as
Compressor oil, Freon, utilized in some older refrigeration systems, Pesticide liquid/spray, air
freshen spray and various other comparable chemicals.

Contaminated gas:
Primarily diesel or gasoline contaminated by water or solvents.

Used and/or Infected oil:

Taken advantage of electrical motor oils and/or mineral oils unfit for their originally meant use. Primarily electrical motor
as well as likewise transmission oil (approximately 80%) polluted by a mix of white spirit and likewise acetone (concerning 51%), hydraulic fluid (about 5%).

Contaminated water:

Waste oilshvater, seeps, hydrocarbons/water blends, services as well as also leachate.

Polluted dirt:

Soil infected by oil, gas or 11 chemicals.
Polluted soil polluted by chemicals that needs to be reused in land fill.
Contaminated dirt—— — — dealt with as well as changed on web site.

Oil Infected Solids
Cloths, Absorbents, Cardboard, oil and additionally gas filters, air filters are dismiss as unsafe materials.

Electronic waste:

Waste digital or electric house appliances or settings up, consisting of printed circuit card,
including toxic material and/or heavy metal and/or emitting low radiation.

Used battery cells:

Dry battery, UPS battery or other kinds, unsorted waste batteries/ battery cells, having
items that are hazardouy.

Used lead-acid batteries:
Waste lead-acid batteries, rained/un-drained, as well as whole or smashed.

Harmful clinical waste:

Expert as well as associated waste, arising from professional, nursing or similar methods and likewise waste
generated in facilities throughout the examination or therapy of individuals (biography threat).

Ran out medications, strong:

Waste medicines, medications and likewise medicines, containing delicate medicines.

Ended medications Iiquid:

Waste liquid pharmaceuticals, numerous kind liquid chemicals for treatment, clinical
oil, along with paraffin based xpired medications.

Ran out and/or contaminated fod:

Ruined fresh food or unusable MRE’s (Meal Ready for Consume – – – – completely dry food)

Onsite Training and also Assem Option for Industrial Incinerators

I. The prospective customers should includ 1a rate in their bargain for training in a central place (Goma or
Bukavu) approximately 15 workers in the procedure and maintenance of the
devices.

Smart Ash Incinerators

1. Size demand for the burners is that the gadget works together with a 55 gallon open ended up
steel drum.
2. The system ought to operate wit. no gas and also make use of just 120V or 220V electric energy for the blowers.
3. The system needs to can melting oil contaminated wastes as well as additionally clinical wastes with a moisture product of 0-15% J.
4. Each tool should certainly consist of 2 steel drums, to make sure that an extra drum is offered.

Spare Components Selection.
If there are any type of provider recommended extra components, that list in addition to price should certainly be consisted of as a choice in the bargain.


100-150kgs Burning rate with Secondary burning to be use in the hospital

Oil tank with 2000Liters capacity

Items/Model

TS150(PLC)

Picture

Principle

Waste Incineration Treatment

Burn Rate

Average 100-150 kg/hour

Feed Capacity

Average 750kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Main Body Steel

8mm thickness

Chamber Material

High Alumina Fire Brick Wall, 1750℃ Rate

Paint for outside face

800°C Rate

Combustion Chamber

1570L

Internal Dimensions

150x100x105cm

Secondary Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

210/230V 50/60Hz

Power

0.9Kw

Oil Consumption (Liter/hour)

Average 14(D.O)

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

300L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800-1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

8500kg

External Dimensions

300x160x280cm(without chimney)


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

precio del incinerador de mascotas

  1. j) Controles
  2. i) Los controles (es decir, interruptores, perillas, etc.) deben estar visibles y claramente identificados, y sus funciones deben

ser evidente por sí mismo.

  1. ii) El diseño del dispositivo debe evitar la mala interpretación de las pantallas y los ajustes de control.

iii) Los interruptores y controles deben protegerse contra cambios accidentales de configuración (p. ej., debido a que alguien se cepilla

contra el panel).

  1. iv) Los controles deben estar sellados contra la penetración de líquidos.

Capacidad: 30 kg por hora para una carga máxima de 120 kg.

Gas GLP

Voltaje: 110 V-120 V

Tablero de control semiautomático

Chimenea de acero inoxidable, 3,5 metros por encima del incinerador.

Pintura a alta temperatura para todo el incinerador.

Puerta de entrada para carga y descarga.

Horas de operación la quema 4000 kg / día (si se alimenta como lotes, por favor mencione)

  1. k) Etiquetado
  2. i) Las etiquetas y marcas deben ser claras y legibles.
  3. ii) Las etiquetas y marcas deben ser lo suficientemente duraderas para soportar la limpieza de rutina y el desgaste normal.

iii) Se deben proporcionar leyendas de advertencia apropiadas en la unidad.

Детали установки для сжигания отходов Датчик термопары с минеральной изоляцией K-Type 300SS

Детали установки для сжигания отходов Датчик термопары с минеральной изоляцией K-Type 300SS
Тип K 300SS: M27 * 2, 300 мм Ins, 2520 SS, сердечник 2,5 мм

HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-27

dual chamber burner


Waste calorific worth: 4000KCAL/KG
Moisture Web content: 10-25%.
Small Ability: 50Kg/Hour set load.
Additional Chamber: 2 Secs @ 850degrees C
The main burning chamber must make certain very little separation temperature degree is not much less than 850 degrees C.

INSULATION.
Calcium Silicate.
Restricting Constant solution restriction 1000 degrees C.
Density 25mm

THROUGHPUT.
50kg/hour at a tiny calorific worth of 4,000 kcal/kg as well as an average bulk density of 120kg/MCubed for standard waste as well as 160kg/MCubed for medical care waste.All type of chemicals substances (Biocides) that made use of for Oil procedure sites (water base Exploration, oil operating centers for the corrosion as well as additionally others: The circumstances of the biocides are “WS-36, HAI-85M, SOFT DRINK ASH, DSMA, MICRO MATRIX, CALCIUM CARBONATE PENALTY, BARAKLEAN, GILSONITE, MIXED WASTE DIRT CHEMICALS, ZINC CARBONATE, CAUSTIC SODA, ENVIROTHIN, BARAZAN D,. etc) in addition to the products are solid and fluid.

2. In regards to the quantity of dropping the waste, possibly 200 – – – – 500 kg per human resources.

3. Our Operational time can be in Day in addition to can be during the night.

4. Can you please provide me the expenditure of device operated with Diesel as well as Gas.The primary burning chamber is the major structure of the heater, produced from light steel plate as well as tensed with rolled steel areas. It is brought from the flooring degree on a substantial steel assistance framework. Internally the covering is lined with calcium silicate insulation and additionally a warm face combination of incredibly duty brickwork or high strength castable.
The vital burning chamber must see to it minimum departure temperature level is very little less than 850 ° C
. One Hands-on Lots Incinerator comprising:.
·???????? Guidebook Loading door.
·???????? Horizontal strong fire place, refractory lined main combustion chamber. Approximate dimensions 800 mm dimensions x 2100mm long.
·???????? Complete sized bulk load/ash elimination door.
·???????? 1 off diesel-fired ignition heater– – temperature level managed. ·???????? 1 off shedding air supply fan in addition to distribution system, automated control.
·???????? High capacity additional burning chamber with residence time very little less than 2 secs @ >> 850 ° C. ·???????? 1 off diesel-fired afterburner– – temperature handled.
·???????? Control board– – automated operation.
e????? Temperature level sign key as well as likewise second chambers 0-1200 ° C.
e????? Refractory lined flanged smokeshaft to an elevation of 10M over ground degree


an incinerator for food waste and polythene waste management

an incinerator for food waste and polythene waste management. as per our requirements we would like the YD 15C small incinerator.Mixed Biomedical waste Incinerator.Contract period:To be decided by the supplier
Payment terms:100% prepayment through bank TT after signing of contract.

Please confirm your willingness to execute this contract project by sending brochure and your price quotation for the below specification to enable us submit it to the firm incharge of the contract for their study and approval.

Type of Waste: Mixed Biomedical waste.THE INCINERATOR AS REQUESTED BY OUR CLIENT SHALL BE SEMI AUTOMATIC WITH:
WASTE BUCKET/TANK – ABOUT 2000KG
CAPACITY OF FEEDING: ABOUT 600-800Kg AT A TIME.
BURNING AT ABOUT 150/165-200 IN 60MINS
THE BURNER SHALL USE DIESEL/OIL
WITH CHIMNEY, ELECTRIC PANNELS,ELECTRIC MOTORS,ETC.
MATERIALS FOR DISPOSAL: SHARP MEDICAL WASTES.

1. Waste burning capacity of unit: 100-125 kgs / hr.
2. Mode of waste handling : Autoloading– DFDV + Bucket elevator
3. Type of fuel : LDO / HSD
4. Type of Burner operation : Automatic
5. Expected fuel consumption: 30-35 kgs/hr **(depending upon overall
mix of the waste, moisture
content, etc.) after preheat.
6. Connected electrical load : Approx. 7-8 KW (AC 3 phase,220V, 50 Hz).
7. Overall space requirement : 9 m (L) X 8 m (W) X 6 m (H) Each unit
without stack

Burners temperature controlled (TIC – Thermocouple) and work on ON –
OFF basis. The frequency on ON – OFF will depend upon the nature of
waste, moisture content, calorific value, etc. and shall vary from waste to
waste. The fuel consumption also depends upon the frequency of the door
opening and method of operation of the incinerator. We have mentioned
approx. expected fuel consumption figures.

The Incineration System comprises of :

I. Main Incinerator with
A. Primary & Secondary Chamber Modules duly refractory lined, piped & wired.
B. Bucket elevator + DFDV mechanism for autoloading and Deashing
mechanism
II i. 1 No. fully automatic Fuel Oil burner for primary chamber.
ii. 1 No. fully automatic Fuel Oil burner for secondary chamber.
III. Centrifugal forced draft fan assembly complete with motor drive, duct and
dampers, etc. mounted on the common skid of the unit to provide :
Combustion air.

Eductor air.
IV. Eductor Assembly for :
Cooling of exhaust gases from 900 – 1000 0 C to around 350 0 C .
Keeping the entire system under negative pressure to avoid hot gases / dust
particles rushing out of charging door.
V. Electrical Control Panel along with safeties, and Audio / Visual
indicators and
/ or alarms for efficient and safe operation of the system.
VI. Electrical wiring of the unit.
VII. Oil tank of 1000 ltrs capacity mounted on the skid
VIII. Operating tools and tackles comprising of – rake, hoe, shovel (I No. each).
IX. Chimney of  2.5 Mtr height.

Общие требования к горелке с 3 камерами сгорания 100 кг / час

Общие технические характеристики инсинератора мощностью 100 кг / час
Нет . Описание Значение параметра
модель HICLOVER YD100
1 Режим работы станка Масло + Энергия Масло + Энергия
2 Напряжение 220V C 3 фазы или 1 фаза 220В 1П
3 Расход масла (л / час) В среднем 25-32 л / час / камера В среднем 33 литра / час / всего инсинератор 3 горелки
6 Скорость сжигания 100 кг / час = 400-600 кг / 8 часов в среднем 100 кг в час
7 Режим подачи Руководство по эксплуатации руководство по эксплуатации
8 Скорость первичного горения 1000 литров 1080 литров
9 Скорость вторичного горения 240 литров 207 литров
10 Скорость третичного сгорания 416 литров 452 литра
11 Материал камеры сгорания Высокий темп. устойчивый бетон Высокий темп. устойчивый бетон
12 Внутренние размеры (1- я камера) 100 * 100 * 100 см (д * ш * в) = 1000 л 120 * 100 * 90 см (д * ш * в) = 1080 л
13 Внутренние размеры (2- я камера) 40 * 40 * 150 см = 240 литров Диаметр 42 * 150 см = 207 литров
14 Внутренние размеры (3- я камера) 40 * 40 * 260 см = 416 л Диаметр 60 * 160 см = 452 литра
15 Внешние размеры 300 * 155 * 200 см (д * ш * в) 220 * 160 * 370 см (д * ш * в)
16 Открытие двери 90 * 90 см 90 * 90 см
17 Дополнительный вентилятор 1 вентилятор (на двери) 1 вентилятор (на двери)
18 Тип топлива Дизельное топливо/ Дизельное топливо
19 Горелка Торговая марка: Радиатор или Hofmat Италия Baltur
20 Длина дымохода 3-4 метра 5 метров
21 год Тип и материал дымохода Нержавеющая сталь типа H или High temp. устойчивый бетон 1 метр высокой температуры. устойчивый бетон +4 метра из нержавеющей стали
22 Фильтр дыма и запаха Да, два этапа. Сухой скруббер 2 стадии
23 Монитор температуры Да, (за 1 – й и 3й камеры) Да (все 3 камеры)
24 Контроль температуры По желанию да
25 Масляный бак Требуется 500 литров. да
26 год Эффективность горения > 98% да
27 Температура 1- й камеры 300-700 о С 800-1000 о С
28 год Температура 2- й камеры 500-1000 о С 1000-1200 о С
29 3- я камера температуры 800-1200 о С 1000-1300 о С
30 Время пребывания дыма > 2 сек. > 2 сек.
31 год Вес брутто 5-8 тонн в среднем 6,5 тонны
32 Кол-во горелок 3 3

HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-27