Archive: July 15, 2024

waste

Containerized Mobile Incinerator CA100

Jul 15, 2024 by hiclover 0 Comments #Blog

Incinerator Model CA100, Overview


100Kg/Hour Burning rate with Secondary burning Capacity


This model is small-scale medical waste incineration equipment. Construction is dual/double 

combustion chamber with 02 units oil burner, batch load incineration equipment. Animal feed 
chamber is 560Liters (Model CA100). Primary & Secondary combustion chambers and smoke 
filter chamber with firebrick and  refractory concrete chamber. Batch load on the bottom of 
chamber. Incinerator panel control suit for local operation.

Model

CA100

Waste Treatment

Medical Waste Incineration Treatment

Feed Capacity

Average 100-200 kgs per feed

Burning Rate

Average 100-120 kgs per hour

Burning Time per Feed

Average 1-2 hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Voltage

220V

Power

1.0Kw

Fuel

Diesel oil

Burner

Italy Burner

Feed Mode

Manual

Temperature Monitor

Digital Display

Fuel consumption (Oil)

Average 20.4 Kgs/Hour

Internal Dimensions

100x80x70cm (Primary Combustion Chamber)

External Dimensions

230 x 130 x 155cm (main body)

Waste combustion chamber

560Liters

Post Combustion Chamber

280Liters

Oil Tank Capacity

200 Liters

Door Opening

70 x 50cm

Chimney

5.0M

Gross Weight

4500kgs

Chamber Material

Firebrick ,Refractory Concrete

Max. Heat Value

166,000Kcal/Hr.

Operation Technical Specifications

Solid Chamber temperature

8000C -10000C

Gas Chamber temperature

10000C -12000C

Chamber Anti-Rate

17500C

Residency time

2.0 Sec.

Burning efficiency

＞98%

Waste Lower Calorific Power

3000Kcal

Pre-assembled, containerized type,do not included chimney installation.Burning rate: 100 – 120kg / hour.
Minimum operating temperature 800-1000 degree.Maximum operating temperature:1000-1200 degree.
Secondary Burning capacity.Density insulation.Refractory casting.Heavy duty refracting lining to 
withstand 1750 degree.Fuel type: fuel oil (diesel).

 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.
waste

Relacionado con Hiclover Medical Ambiromental

Jul 14, 2024 by hiclover 0 Comments #Español

HICLOVER, Nanjing Clover Medical Development Co., Ltd, opciones de sistemas de suministro para la gestión ecológica médica, diseño de cremación de animales y perros domésticos, varios otros trabajos de incineración de desechos sólidos municipales.
Ofrecemos cámaras de combustión simple, cámaras de combustión dobles, 3 cámaras de combustión, así como incineradores de desechos de cámaras de combustión múltiples para laboratorio de investigación, centro, hospital universitario, centro médico, higiene, destrucción de desechos clínicos con desechos médicos no reutilizables, desechos biológicos, desechos plásticos profesionales , materiales contaminados, desechos de bolsas rojas, eliminación de agujas, gasas y vendajes, recipientes afilados asegurados, desechos patológicos, desechos de trazas de quimioterapia, etc.
.
Nuestra colección de incineradores proporciona soluciones relacionadas con la cremación de perros domésticos de rango pequeño a grande, como ranchos avícolas, ranchos de ganado, ranchos de corderos, ranchos de cerdos, establos, perreras, laboratorio de investigación de evaluación, criaderos, crematorios familiares de perros para mascotas.

El quemador arroja desechos en la cámara de combustión primaria y, además, arroja el humo de la cámara de combustión crucial una vez más para garantizar una infección ecológica sin humo negro, sin olor y con bacterias patógenas menores.
Remedios de sistema para residuos médicos ecológicos, que consisten en incineración de residuos, terapia de descarga de humos, limpieza a alta temperatura, lámpara de higiene ultravioleta, trituradora de residuos, destructor de agujas, estrategia de residuos clínicos, contenedores afilados, etc.

Los dispositivos de cremación de perros domésticos para mascotas de estilo humanizado con sistema móvil, cubiertas de área pequeña para propietarios de negocios regionales de cremación de perros de compañía modernos en todo el mundo.
El incinerador móvil contenedorizado montado en contenedor ISO antes de salir del centro de fabricación, preinstalación, casa sin incineración desarrolla edificio y también construcción, movible por vehículo y también higiene de luz ultravioleta en el interior.
HICLOVER es una marca en crecimiento para el campo de la protección del medio ambiente y, además, el mercado muestra una gran cantidad de países de África, Centro Este y Sudeste de Asia, además de parte del área de Estados Unidos y Canadá, Europa. Contamos con amigos para organizaciones gubernamentales, organizaciones benéficas, especialistas globales, organizaciones de logística, militares, empresarios de cremación de mascotas, etc. Tenemos experiencia de exportación en más de 40 países, incluyendo zonas de batalla como Irak, Afganistán, Somalia, Sudán del Sur.

Somos fabricantes de incineradores de China, profesionales y también comerciantes. Tasa de limpieza del productor para el cliente del incinerador, suministro de calentador clínico, quemador de hospital universitario, quemadores de animales, calentadores de cerdos, dispositivos de cremación de perros domésticos para mascotas, incinerador pequeño, incinerador de mascotas doméstico, calentador de animales, quemador móvil, calentador de animales pequeños, equipo de pirólisis de desechos transmisibles, incinerador de laboratorio de investigación. HICLOVER ayuda al cliente a minimizar el plan de gastos de compra, la función personalizada, los productos de calidad y también la opción positiva.

waste

animal cremation

Jul 14, 2024 by hiclover 0 Comments #Waste Incinerators

Technical Specifications of External SHREDDER Controls:

  • Pre-programmed PLC controlled
  • Password activated and reversal history indication
  • Motor starter with overload protection
  • Automatic instantaneous stop on hard object in shredder bed
  • Automatic heavy cutting load reversal and re-try , up to three times
  • Control housing Nema type 12

 

Cutting Hardwires:

  • Chamber Dimensions(WxLxH): approx 33 c m x 38 cm x 25cm
  • Number of knives: Approx 18 or to suit customer needs
  • Knife Thickness: Approx 18mm or to suit customer needs
  • Knife Diameter: Approx 16cm or to suit customer needs
  • Tecth per Knife : minimum 3
  • Number of Shafts: 2 ie double shaft shredder

 

Drive of the shredder:

  • Must be motor driven
  • Motor Horsepower : approx, 10 HP
  • Motor RPM: minimum 1750
  • Speed Reduction: 60:1
  • Generated Torque; min 40 Nm or 350 lbs/in
  • Gearbox: should be parallel shaft
  • Shock protection: Rubber mount torque arm
  • Power : 220vac, 1ph or 400 VAC, 3 ph or suit customer needs

 

Ancillaries to be included:

  • Sherdder stand, fabricated from 3” sq. steel tube, standard height 30 inches
  • Shredder hopper , fabricated form 16 gauge steel, with optional switched hopper lid.

 

(E) Features & Technical Specification of Conveyer:

To carry processed waste from vessel to shredder

 

Control:

  • Motor starter overload protection
  • Control housing Nema Type 12
  • Safety pull stops along both sides of conveyor

 

Ancillaries:

  • Conveyor stand , fabricated from 2” sq. steel tube
  • Raised sidewalls fabricated form 16 gauge steel

 

dimension:

  • Over-all length: between 20-25 feet or appropriate length depending on the installation requirement.
  • Over-all width: between 24-30 inch
  • over-all (without including stand) : between 12-14 inch
  • Available inclines: 0-40 degrees

 

Belt:

  • Belt Speed: 75 fi/min
  • Dam spacing; approx, 16 inch

 

Drive:

  • Motor driven
  • Horsepower: Approx .075
  • Motor RPM: approx.60
  • Electrical power input: 220 vac. 1ph or 400 VAC, 3 ph or to suit customer needs.

 

(F) Technical Specification of tipper features:

  • It is to be designed to allow for easy bin positioning under the door to unload processed waste and easy

inaneuverapility for lifting and tipping the waste into the shredder hopper.

  • Equipment with 2 bins to accommodate processed waste loads to be loaded into the shredder and shredded waste to be

transported to the disposal bin.

  • Frame: Rugged heavy duty frame constructed of formed and welded steel formed and welded steel for extra strength.
  • Mast: Fabricated with channel steel for greater strength and dependability. Open structure design complete with

safety cage to offer greater visibility

  • Lifting Chains: Must be dual lifting chain of roller style & must meet safety factor at least 6:1
  • Hydraulic system: durable cylinder with a chrome plated ram and a relief valve for overload protection
  • Forks: Heavy duty approx 4.0” wide x 42” long fixed forks.
  • Platform; solid steel
  • Battery: A heavy duty 12 volt, 125 amps/hour industrial strength battery.
  • Overload protection plugs into any 220 VAC outlet.
  • Steering: A pallet truck style steer handle for steering and approx. 4” phenolic wheels with roller bearings located

in the straddle legs.

  • Brake: A hand controlled floor lock brake that secures the unit in place.

 

Specifications:

  • Load capacity; Approx 1500 lbs
  • load centre: Approx 24 inch
  • Raised fork height: to suit customer needs
  • Overall must height: to suit customer needs
  • Lowered height: minimum 4.0 inch
  • Fixed fork width: approx 7 inch
  • Fork length : approx 42 inch
  • Platform of approx.25”x25”
  • overall width approx 25 inch
  • castors: approx 5 inch phenolic
  • Front wheel : approx 4 inch phenolic
waste

50 KG/HR BIOMEDICAL INCINERATOR

Jul 14, 2024 by hiclover 0 Comments #Blog
Waste Incineration Treatment Burn rate (rate of waste incineration) -at least 50 kg per hour

 Oil tank

smoke filter chamber

Items/Model

TS100(PLC)

Picture

Principle

Waste Incineration Treatment

Burn Rate

Average 50-100 kg/hour

Feed Capacity

Average 200kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

1000L

Internal Dimensions

120x100x90cm

Secondary Chamber

540L

Smoke Filter Chamber

Optional

Feed Mode

Manual

Voltage

220V

Power

3.0Kw

Oil Consumption (kg/hour)

Average 20.4

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

1800L

Feed Door

80x60cm

Chimney

6Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800℃–-1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

7000kg

External Dimensions

260x150x180cm(Main Body)

 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.
русский

ДИЗЕЛЬНАЯ ГОРЕЛКА С ТОПЛИВНЫМ БАКОМ 1000 ЛТР И ДЫМОХОДОМ 6М

Jul 14, 2024 by hiclover 0 Comments #русский

Предметы / Модель

TS250 (ПЛК)

Фото

Концепция

Терапия сжиганием отходов

Скорость сжигания

В среднем 250 кг / час

Возможность кормления

Стандарт 400 кг / кормление

Настройка управления

ПЛК (программируемый контроллер логики записи)

Камера сгорания

2000л

Внутренние измерения

210x88x110 см

Вторая палата

1000л

Камера дымового фильтра

да

Настройка подачи

Путеводитель

Напряжение

220В

Мощность

2,0 кВт

Потребление масла (кг / час)

Типичный 24,2 (DO)

Забор газа (м3 / час)

***

Дисплей температуры

Цифровой подарок

Безопасность на уровне температуры

да

Масляный бак

1000л

Дверца подачи

2,04 x 1,06 М

Дымовой вал

3 метра

Вид дымохода

Нержавеющая сталь

1-й. Температура камеры

800 ℃ –– -1000 ℃

второй. Уровень температуры камеры

1000 ℃ -1200 ℃

Время проживания

2.0 сек.

Вес брутто

9000кг

Внешние измерения

3,00 м x 1,60 мx3,00 м (без дымохода)
СЖИГАНИЕ – ЭТО ПРОЦЕСС ОБРАБОТКИ ОТХОДОВ, КОТОРЫЙ ВКЛЮЧАЕТ СЖИГАНИЕ ОРГАНИЧЕСКИХ ВЕЩЕСТВ, СОДЕРЖАЩИХСЯ В ОТХОДАХ. СЖИГАНИЕ И ДРУГИЕ СИСТЕМЫ ОБРАБОТКИ ВЫСОКОТЕМПЕРАТУРНЫХ ОТХОДОВ ОПИСАНО «ТЕРМИЧЕСКАЯ ОБРАБОТКА». СЖИГАНИЕ ОТХОДОВ ПРЕВРАЩАЕТ ОТХОДЫ В ЗОЛУ, ДЫМОХОД И ТЕПЛО. Зола, в основном, образуется из неорганических отходов и может принимать форму твердых кусков или порошка.

ПЛАН НА ДВУХ (2) ГОДА ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ ЗАПЧАСТЕЙ ДЛЯ ЛИНИИ 2 X МАСЛЯНЫЙ НАГРЕВАТЕЛЬ

2 КОМПЛЕКТА ДЛЯ КРЕПЛЕНИЯ ЦЕМЕНТА (25 КГ)

2 Х ТЕРМОПАРЫ

2 X ПОЖАРНАЯ ВЕРЕВКА (1М)

2 X HT МАСТИКА (НА ИНСИНЕРАТОР)

1 X СИЗ


HICLOVER – Медицинское окружение  
Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-27

waste

HIGH TECH MEDICALWASTE INCINERATOR

Jul 13, 2024 by hiclover 0 Comments #Blog

Incinerator model A
Burn Rate 65kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
10m Hose Pipe, indicate length
I000 Litre Fuel Tank + Pipe System, indicate volume
Additional chimney extension, indicate height
Warranty, indicate no of years
i.    The primary combustion chamber shall be accepted as the primary combustion zone;
ii.    The minimum combustion temperature of the primary chamber shall not be less than 800 degrees C;

Secondary combustion
The residence time in the secondary chamber shall not be less than 2 seconds;
The gas temperature as measured against the inside wall in the secondary chamber, not in the flame zone, shall not be less than as indicated in Lots 1-7 ;
Both the primary and the secondary temperatures shall be maintained until all the waste has been completely combusted;

Chimney
The chimney shall have a minimum height of 4 meters above ground level;
The minimum exit velocity of the emissions shall not be less than 10 metres/second;

Temperature Warnings
An audible and/or visible alarm to warn the operator when the secondary temperature drops to below the required temperature;

General
Control box can be detached and mounted on separate stand at least 1.5 meters from incinerator at approximately 1.6 meter height;

Lot 2
Item 5    Incinerator model B
Burn Rate 150kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Diesel/LPG/LNG, please indicate
Power Supply for Control Box- 220V-240V 50Hz single phase
Minimum operating temperature 920 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 6    10m Hose Pipe, indicate length
Item 7    I000 Litre Fuel Tank + Pipe System, indicate volume
Item 8     Additional chimney extension, indicate height
Warranty, indicate no of years
Lot 3
Item 9    Incinerator model C
Burn Rate 250kg/h minimum
Weight (kg) please indicate:
Secondary Chamber
Gas Retention Time 2 Seconds
Fuel Diesel/LPG/LNG, please indicate
Power Supply for Control Box 220V-240V 50Hz single phase
Minimum operating temperature 920 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 10    10m Hose Pipe, indicate length
Item 11    I000 Litre Fuel Tank + Pipe System, indicate volume
Item 12    Additional chimney extension, indicate height
Warranty, indicate no of years
Lot 4 – High Temperature Waste Incinerator
Item 13    HTW Incinerator model D
Burn Rate – 150kg/hour minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time 2 Seconds
Fuel Diesel/LPG/LNG, please indicate
Power Supply for Control Box 220V-240V, single phase 50-60Hz
Minimum operating temperature 1200°C, please indicate
One year Spare Parts Package for complete maintainability
Item 14    10m Hose Pipe, indicate length
Item 15    1000 Litre Fuel Tank + Pipe System, indicate volume
Item 16    Additional chimney extension, indicate height
Warranty, indicate no of years
Lot 5 – Mobile Incinerator
2.    Incinerator provides 2 chamber incineration and holds gasses for a minimum of 2 seconds.
3.    Each incinerator must have adequate labelling for parts/areas of high occupational health and safety risk on the incinerator.
4.    Evidence their product meets relevant national or international emissions standards, such as the United States Environmental Protection Agency, United Kingdom Department for Environment Food
& Rural Affairs, or European Union regulations and directives.

Item 17    Mobile Incinerator model E
Burn Rate 50kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 18    10m Hose Pipe, indicate length
Item 19    1000 Litre Fuel Tank + Pipe System, indicate volume
Item 20    Additional chimney extension, indicate height
Lot 6 – Mobile Incinerator
Item 21    Mobile Incinerator model F
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 22    10m Hose Pipe, indicate length
Item 23    1000 Litre Fuel Tank + Pipe System, indicate volume
HTW Mobile Incinerator model G
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 1200 °C, please indicate
One year Spare Parts Package for complete maintainability
10m Hose Pipe, indicate length
1000 Litre Fuel Tank + Pipe System, indicate volume

waste

STRONG WASTE BURNER

Jul 13, 2024 by hiclover 0 Comments #Waste Incinerators


Primary chamber – Consists of a monolithic high grade refractory concrete with high grade insulation backing, . Utilising a refractory hearth or equivalent for continuous ash removal.

Secondary Chamber – Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. bio medical waste treatment plant ( Incineration )with panel.

SOLID WASTE INCINERATOR    Feeding Capacity:    200 to 220 Kg.
Burn Rate *    60 Kg / hr
Ingredients to be burned    Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc.
Chambers *    Dual Chamber.
1: Primary Controlled Air
2: Secondary Excess Air
Temperature Monitoring    Required
Temperature Control to Primary & Secondary Chambers    Required
System Status & Alarms    Required for all necessary parameters.
Fittings & Accessories    Complete Package is required ( Including Nozzles & Flanges etc.)
Installation Requirements.    As low as possible . Almost Plug & Play type.
Dimensional Sketch, Operation & Installation Manuals.    Required
Off – Gas System    Required
Heat Insulation    Required for indoor installation
Delivery    Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:
Component Name        Features                 Range.
Primary Chamber    Temperature Required*    800 – 1000 deg C.
Heating Source    Natural Gas

Secondary Chamber    Temperature *    1100 – 1300 deg. C
Heating Source    Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time     2 Seconds.
Refractory Material    Material *    Alumina ( 56 – 80 % Pure )
Lining *    SS 316L
Life Span *    10 – 15 years.
Rating Temperature    1600 – 1800 deg. C
Media    Slightly acidic
Insulation    Material    Ceramic Fiber
Thickness    25 “ minimum
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares    Required for 5 Years trouble free operation


waste

Especificaciones requeridas para Mobile Burner

Jul 12, 2024 by hiclover 0 Comments #Español

Habilidades funcionales

  • PROCESO MÍNIMO 1 TONELADA POR DÍA
  • OPERADO CON CAPACITACIÓN LIMITADA
  • EL MANTENIMIENTO REGULAR SE PUEDE COMPLETAR CON CAPACITACIÓN LIMITADA
  • CUMPLE CON LAS NORMAS DE EMISIÓN EURO / US-EPA
  • CAPACIDAD PARA QUEMAR LUBRICANTES RESIDUALES (POL)
  • MANIPULAR SÓLIDOS ORGÁNICOS (INCLUYE RMW)
  • DESPLEGABLE
  • MÓVIL
  • 24 HORAS DE USO CONTINUO
  • SISTEMA DE CARGA AUTOMÁTICA
  • SISTEMA AUTOMATIZADO DE EXTRACCIÓN DE CENIZAS
  • SISTEMA DE FREGADO A GAS
  • REDUCCIÓN DEL 95% DE RESIDUOS SÓLIDOS
  • OPERAR SIN DIESEL O ACEITE COMBUSTIBLE
  • CAPAZ DE QUEMAR 4 UNIDADES DE RESIDUOS POR UNIDAD DE COMBUSTIBLE
  • CAPAZ DE LLEVAR TODOS LOS RESIDUOS COMBUSTIBLES QUE INCLUYEN: PAPEL, PLÁSTICO, CARTÓN, ALIMENTOS, ACEITES USADOS, LODOS, TRAPOS ACEITOSOS, MADERA
  • NO SE REQUIERE TRATAMIENTO PREVIO DE RESIDUOS
  • GARANTÍA DE COMPONENTES DE CINCO (5) AÑOS

Especificaciones técnicas

  • MANUAL DE FUNCIONAMIENTO Y MANUAL DE ENTRENAMIENTO PARA CADA INCINERADOR
  • MANUALES DE INSTRUCCIONES DE CONFIGURACIÓN E INSTALACIÓN
  • IMPRESIÓN EN AZUL / ESQUEMÁTICA PROPORCIONADA QUE DESCRIBE LAS DIMENSIONES FÍSICAS DE LOS INCINERADORES DE 20 ‘
  • INCINERADORES COMPUESTOS CON CONSTRUCCIÓN SOLDADA PARA TRABAJOS PESADOS
  • OPERADO Y TRANSPORTADO EN INCINERADORES DE 20 ‘(CONTENEDORES)
  • ACCESO COMPLETO DELANTERO Y TRASERO OPCIONAL
  • CONTROLES DE TEMPERATURA PRIMARIO / SECUNDARIO
русский

Инсинератор с 1 или 3-х зонным скруббером

Jul 12, 2024 by hiclover 0 Comments #русский
В настоящее время обращение с медицинскими отходами осуществляется через старую установку для сжигания медицинских отходов; который также управляет соответствующими процедурами доставки медицинских отходов и удаления золы. Патологические отходы: органы, ткани, хирургические образцы, биологические жидкости, удаленные во время операции или вскрытия. Смесь и влажность неизвестны. Допускаются еженедельные поставки при 8 часах работы в день = производительность 11 кг в час.

Дизайн

Ярд-150

Фото

Горящая цена

Обычно 150 кг / час

Возможность подачи

Стандарт 300 кг / кормление

Камера для сжигания ключей

1500 литров

Дополнительная камера сгорания

500 литров

Камера сжигания смеси

да

Камера дымового фильтра

Система влажной скруббера (3-х зонный тип)

Настройка подачи

Руководство по эксплуатации

Напряжение

380В

Мощность

9,0 кВт

Вид топлива

Дизельное топливо / полностью природный газ / сжиженный нефтяной газ

Горелка

Италия Оригинал

Расход масла (дизельное топливо)

В среднем 24 кг / час

Забор газа (газ)

***

Внутренние размеры

150 x 100 x 96 см (основная камера)

Внешние размеры

240 x 170 x 380 см (без дымохода / мокрого скруббера)

Монитор температуры

да

Емкость масляного бака (для жидкого топлива)

300 литров

Открытие двери

59 х 81 см

Длина дымохода

10.0 метров

Вид дымохода

Нержавеющая сталь

Вес брутто оборудования

11000 кг

Технические характеристики процедуры

Уровень температуры в основной камере

800 ℃ –– -1000 ℃

Уровень температуры второй камеры

1000 ℃ -1200 ℃

Время проживания

2.0 сек.

Эффективность горения

＞ 98%

Отходы с более низкой теплотворной способностью

3000 ккал
HICLOVER – Медицинское окружение  
Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-06-27

waste

Waste Incineration Treatment Incinerators Avg. 100kgs per hour

Jul 12, 2024 by hiclover 0 Comments #Blog
HICLOVER incinerator exert the advantages and discard the disadvantages of the same kind of equipment at domestic and abroad. It is an unique and international advanced medical waste incineration equipment. The equipment is small size, high efficiency, reasonable process, leading technologies and a high harmless degree, ideal garbage treatment equipment for hospital, laboratory, hotel, station, etc.

Items/Model

TS100(PLC)

Picture

 

Principle

Waste Incineration Treatment

Burn Rate

Average 100 kg/hour

Feed Capacity

Average 200kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

1200L

Internal Dimensions

120x100x100cm

Secondary Chamber

600L

Smoke Filter Chamber

Yes(Dry Scrubber)

Feed Mode

Manual

Voltage

220V

Power

0.7Kw

Oil Consumption (kg/hour)

average 20.4

Gas Consumption (m3/hour)

average 24.5

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

200L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800℃–-1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

6000kg

External Dimensions

260x150x180cm


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.