Category: Uncategorized

In response to the needs of our customers, the company has introduced an upgraded automatic winding air filter with a pipe reducing and flange mouth, which is convenient for the front and back connection with the blower, air conditioning unit, humidifier, muffler equipment, etc., avoiding the customer alone The problem that the on-site installation fails to fix the connection after purchasing the wound filter.

l   Duct type housing + vertical winding filter

Often used in environments where space is not restricted  

l Air duct shell + horizontal winding filter

Horizontal automatic winding filters are often used in small or short spaces. When the space height is limited, we must strictly consider the effective filter area to meet the required air volume. The wide and long design of the horizontal automatic winding filter can be installed in a small space and can meet the air volume design requirements.

When the automatic winding filter is used to filter harmful particles or irritating gases, the operator has to enter the closed space of harmful dust or irritating gases when replacing the raw material. The operator will be injured. Through the patented design of the filter box type horizontal automatic winding filter, the operator does not need to enter the operation to replace the filter material, which is very safe and convenient

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s

2. When the width>06ft, it needs to be divided into multiple units and assembled

3. Can provide customers with a variety of non-standard size customization

Standard drawings:

Product introduction:

The automatic winding filter is actually a new type of air filtering equipment. It is an automatic equipment that realizes the replacement of filter materials by converting the pressure difference between the front and rear of the filter into a sensor signal.

working principle

It is mainly composed of filter material, transmission system and automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached, the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.  

Product Features:

* Sturdy structure, can meet the harshest working environment

* Intelligent filter material replacement system, effectively saving energy and reducing costs *Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low, medium and high-end to meet customer differentiated needs

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual, time/pressure difference control, photoelectric control, PLC control

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* For the air filter system of chemical plants, textile factories, spraying workshops, etc., perform initial filtration to remove most of the particulate matter and effectively improve the quality of exhaust gas and circulating gas.

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s  

2. When the width>06ft, it needs to be divided into multiple units and assembled

   3. Can provide customers with a variety of non-standard size customization

Standard drawing

Product introduction:

The automatic winding filter is actually a new type of air filtering equipment. It is an automatic equipment that realizes the replacement of filter materials by converting the pressure difference between the front and rear of the filter into a sensor signal.

working principle

It is mainly composed of filter material, transmission system and automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached, the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.

Product Features:

* Sturdy structure, can meet the harshest working environment

* Intelligent filter material replacement system, effectively saving energy and reducing costs

* Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low, medium and high-end to meet customer differentiated needs

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual, time/pressure difference control, photoelectric control, PLC control

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* Efficiency of the filter within chemical plants, textile mills, paint shop air filter system, etc. First, remove most of the particulate matter, exhaust emissions and improve the quality of recycle gas.

Control function details:

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s

2. When the width>06ft, it needs to be divided into multiple units and assembled

   3. Can provide customers with a variety of non-standard size customization    

Standard drawing

Product introduction:

In order to save the customer’s expenses, the manual roll-up filter is actually a simple type of roller shutter air filter product. The main feature is that it saves the automatic control function. Manually shake the hand wheel to realize the process of filter material replacement.

working principle

It is mainly composed of filter material, transmission system and automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached , the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.

Product Features:

* Sturdy structure, can meet the harshest working environment

* Manual replacement of filter materials, effectively saving energy and reducing costs

* Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low , medium and high-end to meet the differentiated needs of customers

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* For the air filter system of chemical plants, textile factories, spraying workshops, etc., perform initial filtration to remove most of the particulate matter and effectively improve the quality of exhaust gas and circulating gas.

Product size and air volume parameter table

Note: 1. The air volume value calculated at the above wind speed @2.5m/s  

     2. When the width>06ft, it needs to be divided into multiple units and assembled

     3. Can provide customers with a variety of non-standard size customization

Standard drawing

The company solemnly launched the special stainless steel rolling curtain filter for pharmaceutical factories and chemical plants. This automatic rolling curtain air filter is an updated and upgraded product of ordinary products. All the structure and materials are made of stainless steel 304 material, which is corrosion-resistant and oil-resistant. The environment with high humidity and heavy pollution can also work continuously. It is the best choice for automatic rolling shutter filters in pharmaceutical factories, chemical plants, organic waste gas treatment and other environments.

Product introduction:

Auto roll filter is actually a novel air filter device, which is converted to the sense signal by the pressure difference before and after the filter, the filter replacement to achieve automation equipment.

working principle

It is mainly composed of filter material, transmission system and automatic control system.

The new filter material is installed in the loading box. When the intake air with high concentration of dusty air passes through the winding filter, the pressure difference between the front and rear of the filter gradually increases with the increase of the dust; when the filter resistance rises to the set final resistance When the value is reached, the pressure difference switch starts to act, and the winding system updates the filter material; when the rolling time is reached, the transmission is stopped, the update of the filter material is completed, and the filter is restarted.

Product Features:

* Sturdy structure, can meet the harshest working environment

* Intelligent filter material replacement system, effectively saving energy and reducing costs

* Modular design can meet any type of system design and installation requirements

* Different materials and configuration options for low, medium and high-end to meet customer differentiated needs

Material: high-quality cold-rolled steel plate paint, aluminum profile or SUS 304

Control: manual, time/pressure difference control, photoelectric control, PLC control

Filter material: dedicated mesh filter material, G3, G4 (EN779) efficiency

Installation: The finished product can be operated at the delivery site only if it is powered on. If the on-site installation space is limited, the parts can be packaged and shipped, and the goods can be assembled and formed flexibly when they arrive at the site.

Applications:

* Effectively filter the fresh air in the clean room with large particles of air to provide more qualified air into the clean room;

* Effectively prevent the appearance of stains around the fresh air outlet of the air conditioner, and the service life of the middle-efficiency high-efficiency filter in the back section of the palace is long;

* Effectively prevent serious dust accumulation in the blower of the sewage treatment plant, and install it at the front end of the blower to effectively protect the blower;

* Efficiency of the filter within chemical plants, textile mills, paint shop air filter system, etc. First, remove most of the particulate matter, exhaust emissions and improve the quality of recycle gas.