Archive: December 17, 2024

hiclover 10kgs per hour incinerator



Smallest waste incinerator for small hospital 
average 10kgs per hour. 
with double(2) sets burner.

Equipment Technical Specifications

Model

YD-10

Feed Capacity

Average 20 kgs per feed

Burning Rate

Average 10 kgs per hour

Burning Time per Feed

2 hours

Voltage

220V

Fuel

Diesel oil

Burner

Italy Burner

Feed Mode

Manual

Fuel consumption (Oil)

5.4-12.6 Kgs/Hour

External Dimensions

100 x 100 x 160cm (mainbody)

Internal Dimensions

50 x 50 x 80cm(Primary Chamber)

Waste combustion chamber

200Liters

Post Combustion Chamber

100Liters

Oil Tank Capacity

50 Liters

Door Opening

35 x 35cm

Chimney

3.0M

Gross Weight

1000kgs

Chamber Material

Refractory Concrete

Max. Heat Value

126,000Kcal/Hr.

Operation Technical Specifications

Chamber temperature

8000C -10000C

Chamber Anti-Rate

13500C

Residency time

0.5 Sec.

Burning efficiency

98%

Waste Lower Calorific Power

3000Kcal

HICLOVER – Medical Environmental 


 

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-02-08



Размер инструмента : Скорость горения : Пиролитический двухкамерный инсинератор 60-80 кг / час

Предметы / Модель

TS100 (ПЛК)

Фото

Концепция

Обработка мусора

Цена записи

60-80 кг / час

Режим управления

ПЛК (Инсинератор с программируемым логическим контроллером)

Камера сгорания

1200L

Внутренние измерения

120x100x100 см

Вторая палата

600 л

Камера дымового фильтра

Да (сухой скруббер)

Настройка подачи

Руководство по эксплуатации

Напряжение

220В

Расход масла (кг / час)

Типичный 20,4

Забор газа (м3 / час)

***

Монитор температуры

Цифровой подарок

Температурный уровень защиты

да

Емкость для масла

1100л

Дверца подачи

80×60 см

Дымовой вал

10 метров

Вид дымохода

Нержавеющая сталь

1-й. Температура камеры

800 ℃ – -1000 ℃

второй. Уровень температуры камеры

1000 ℃ -1200 ℃

Время проживания

2.0 сек.

Вес брутто

6000кг

Внешние размеры

260x150x180 см


Требуется пиролитическая двухкамерная печь для сжигания отходов. Инсинератор должен работать на дизельном топливе.
топливо в качестве дополнительного мазута.
Он должен включать в себя систему контроля загрязнения воздуха (APC), подходящую для базового контроля выбросов.
Предлагаемые инсинераторы должны подходить для критических суровых условий окружающей среды, подходить для быстрого
размещение, и различные климатические зоны (например, пустыня, тропическая страна, горы и т. д.), в которых есть несколько
колебания относительных природных сил (например, температуры, влажности, ветра и т. д.) в течение как минимум 10 лет
если соблюдается указанный график технического обслуживания.
Инсинераторы должны поставляться по возможности в собранном виде, а все части и компоненты должны быть
упакованы на поддонах для перевозки автомобильным, воздушным транспортом (вертолетами или авиагрузами, например, MI8 или C130)
и морем в 20-футовых морских контейнерах ISO.
HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-03-21

PROGRESSED MEDICALWASTE HEATER


Incinerator design A.
Burn Rate 65kg/h minimum.
Weight (kg), please recommend:.
Second Chamber.
Gas Retention Time – – – – 2 Secs. Power Supply – for – Control Box – 220V-240V 50Hz solitary stage.
10m Pipe Pipeline, show size. I000 Litre Gas Container+ Pipeline System, show quantity.
Included chimney expansion, suggest elevation. Guarantee, indicate no of years. The minimum combustion temperature degree of the main chamber will certainly not be less than 800 degrees C;

Second combustion.
The residence time in the second chamber will not be much less than 2 seconds;.
The gas temperature degree as determined versus the within wall surface area in the second chamber, not in the fire location, will not be a lot less than as received Lots 1-7;.
Both the major as well as the 2nd temperature degrees will certainly be maintained till all the waste has been entirely ignited;

Smokeshaft.
The smokeshaft will have a marginal elevation of 4 meters over ground degree;.
The minimal leave rate of the discharges shall not be less than 10 metres/second;

Temperature Level Warnings.
When the secondary temperature drops to detailed below the required temperature level;

General, a noticeable and/or distinct alarm system to encourage the driver.
Control box can be gotten rid of in addition to placed on different stand at least 1.5 meters from incinerator at around 1.6 meter elevation;

Great Deal 2.
Point 5 Burner design B.
Burn Price 150kg/h minimum.
Weight (kg), please suggest:.
Extra Chamber.
Gas Retention Time – – – – 2 Seconds. Diesel/LPG/LNG, please suggest.
One year Spare Parts Package for complete maintainability.
Thing 6 10m Tube pipe Pipeline, indicate dimension.
Item 7 I000 Litre Gas Tank + Pipeline System, suggest quantity.
Item 8 Included smokeshaft extension, show altitude.
Warranty, show no of years.
Large amount 3.
Point 9 Incinerator layout C.
Burn Rate 250kg/h minimum.
Weight (kg) please indicate:.
2nd Chamber.
Gas Retention Time 2 Secs.
Gas Diesel/LPG/LNG, please show.
Power Supply for Control Box 220V-240V 50Hz single stage.
Minimum operating temperature level 920 ° C, please indicate.
One year Spare Components Bundle for complete maintainability.
Product 10 10m Tube pipeline Pipeline, show length.
Thing 11 I000 Litre Gas Container + Pipeline System, indicate volume.
Thing 12 Extra chimney extension, reveal height.
Guarantee, indicate no of years.
Lot 4– – Warm Waste Burner.
Point 13 HTW Burner style D.
Burn Price – – – – 150kg/hour minimum. Weight( kg), please show:.
Additional Chamber.
Gas Retention Time 2 Secs.
Fuel Diesel/LPG/LNG, please suggest.
Power Supply for Control Box 220V-240V, solitary phase 50-60Hz.
Minimum running temperature level 1200 ° C, please show.
One year Spare Components Package for complete maintainability.
Thing 14 10m Hose pipeline Pipe, suggest size.
Item 15 1000 Litre Gas Tank + Pipeline System, reveal amount.
Product 16 Added smokeshaft development, reveal elevation.
Solution guarantee, reveal no of years.
Good deal 5– – Mobile Burner. 2. Incinerator gives 2 chamber incineration in addition to holds gasses for a minimum of 2 seconds.
3. Each incinerator needs to have appropriate labelling for parts/areas of high job health and wellness threat on the incinerator.
& & Country Issues, or European Union regulations and guidelines.

Item 17 Mobile Burner version E.
Burn Rate Price minimum.
Weight (kg), please show:.
Second Chamber.
Gas Retention Time – – – – 2 Seconds. Gas – Diesel/LPG/LNG, please program. Power Supply for – Control Box – 220V-240V 50Hz single stage. Minimum operating temperature level 850 ° C, please program. One year Spare Parts Bundle for complete maintainability. Product 18 10m Hose pipe Pipeline, reveal
dimension. Item 19 1000 Litre Gas Storage Tank + Pipeline System, show volume.
Item 20 Extra chimney expansion, suggest height.
Great deal 6– – Mobile Burner.
Item 21 Mobile Burner design F.
Burn Price 100kg/h minimum.
Weight (kg), please suggest:.
Additional Chamber.
Gas Retention Time – – – – 2 Secs. Gas – Diesel/LPG/LNG, please suggest –. Power Supply – for – Control Box – 220V-240V 50Hz solitary phase. Minimum running temperature level 850 ° C, please recommend. One year Spare Components Plan for full maintainability.
Item 22 10m Hose pipe Pipe, show size.
Point 23 1000 Litre Gas Tank + Pipeline System, recommend quantity.
HTW Mobile Burner style G.
Burn Price 100kg/h minimum.
Weight (kg), please indicate:.
Extra Chamber.
Gas Retention Time – – – – 2 Seconds. Fuel – Diesel/LPG/LNG, please show.
Power Supply for Control Box – – – – 220V-240V 50Hz singular phase.
Minimum running temperature level 1200 ° C, please suggest.
One year Spare Parts Package for total maintainability.
10m Pipeline Pipeline, show size.
1000 Litre Gas Storage Tank + Pipeline System, suggest volume


incinerators at three facilities to process healthcare waste

a. 2.5 metric tons per day healthcare waste incinerator

b. 1.5 metric tons per day healthcare waste incinerator

c. 300 kg per day healthcare waste incinerator

Our preferred technology is double-chamber incineration, but if you recommend an alternative technology, that is acceptable as well.

We request information on the following for each of the above requirements:

1. Capital cost (delivered cost in Oman)

2. Operation and maintenance costs (per year)

3. Number of operators required

4. Product specifications (sizes, temperatures, residence time, cycle time etc)

5. Other auxiliary equipment that is required or recommended by you

precio de combustión primaria incinerador médico

Nuestras actividades normales generan de 2 a 5 toneladas de materiales de desecho variados por día que van desde los cadáveres desechados y el precio de combustión primaria de incineradores médicos.

otros desechos, todos los cuales deben incinerarse a más de 800 grados centígrados de gases de escape medidos.

hospitales y clínicas para la eliminación segura de desechos infecciosos y patológicos.

Capacidad de carga en el rango de hasta 200 kg
– Velocidad de combustión aprox. 50 kg / hora –

Los incineradores deben ser muy efectivos, eficientes en combustible con tasas de combustión de alta / baja capacidad
y estar diseñado para cumplir con las Normas de Control de Contaminación / DEFRA, etc. Tecnología:

Quemador de temperatura controlada. Carcasa de alta resistencia, para ser un desecho médico de calidad, resistente, confiable y económico

Incinerador con control relevante, fácil de operar y autónomo. Tipo de combustible: Diesel / Oil o Gasolina.
Unidades para ser preensambladas, preinstaladas, precableadas y probadas antes del Transporte / Exportación.

En el marco de una consulta sobre tecnología y equipos médicos y medioambientales y compras conjuntas,

La Oficina de Adquisiciones invita a los solicitantes de precalificación con el objetivo de seleccionar principalmente empresas capaces para presentar ofertas.

para la oferta anterior.
El suministro comprenderá el equipo especial para la gestión eficaz de residuos como se mencionó anteriormente para un nuevo privado

empresa de gestión de contratos medioambientales con operaciones previstas en 2013 en Indonesia y Tailandia, y en 2014 en el oeste y el este

Malasia para llevar a cabo esos servicios profesionales para cumplir con los requisitos de eliminación de seguridad del gobierno.

para residuos médicos y hospitalarios, clínicos en la región y para cumplir con el estándar técnico más alto en este particular

incineradores pequeños con filtro (con la mínima contaminación) para quemar / quemar 5 kg / h, 10 kg / h, 15 kg / h,

20 kg / h, 25 kg / ha 50 kg / h y 300 kg / h de SÓLIDO ORGÁNICO SECO Y HÚMEDO NO PELIGROSO de ningún tipo (incluido el hospital

residuos) por día o por hora. Debe ser sin humo, sin vapores, sin olor (olor), sin polvo, sin emisión de sólidos

partículas y con la mínima contaminación (dentro de los estándares nacionales e internacionales). Debe ser ambientalmente

saludable y aceptable con estándares internacionales. No debe ser con depuradores de agua. Contenido de ceniza después de la quema

debe ser del 3-4%.

medical waste PYROLYTIC INCINERATOR

TECHNICAL SPECIFICATIONS: PYROLYTIC INCINERATOR

Parameter Compliance
Type of Waste To treat medical waste, categories A,B,C,D,E
Type of Incinerator Pyrolytic
Nominal Burn rate 50 t0 60 kg/ hr at 3500Kcal/Kg
Loading Manual, Batch Load
De Ashing Automatic or Manual batch de ashing
The incinerator must avoid the release of black smoke and fine dust during the loading
Primary chamber capacity 2-3 m³
The insulation   of the combustion chamber should be composed   of refractory bricks, having a higher content of aluminium and insulates,
The plate of combustion in carborundum avoiding the fixing of glass and slags
Hours of operation /Day >10 hrs
Max Operating Temperatures 1400 °C
Normal Operating Temperatures(Primary) >850 °C
Operating Temperature(Secondary) >1100 °C
It should have digital temperatures regulator( Temperatures regulator in digital watch)
Carbon content of ashes <2%
The installation should be completely free from visible smoke as well as offensive odours
Residence time in second chamber 2 second minimum
The internal diameter of the Chimney :Ø 400
Height of stack >8m
Burner operation Automatic On/Off
Fuel Diesel
Fuel consumption at raed capacity >7kg waste /ltr
Electricity consumption <2kW at rated capacity
Operating Voltage 220 – 240V AC 50Hz
Spare parts Supply for 1 year quoted as option
Consumables Supply for 1 year of operation to be mentioned as option
Warranty Parts and service support: 1 year minimum post comissioning
Service support <72 hours
Emission standard Compliance BS3316 or equivqlent standard
Process filtering system Scruber to be mentioned as option
CE Manufacturing Compliance BS EN 746-2-1997
Design Specification Type A,B,C,D,and E of medical waste
Installation and Comissioning Included in condition of supply
Training in preventive and curative maintenance and use of the incinerator Operator training inclusive in offer
Capacity to treat Plastic Not less than 40% by weight

 

Цена сжигания больших размеров : 150-200 кг / час Устройства для твердых отходов Горелка первичной и второй камеры сгорания

Предметы / Модель

TS500 (ПЛК)

Картина

Концепция

Обработка мусора

Цена записи

150-200 кг / час

Настройка управления

ПЛК (Программируемый логический контроллер записи)

Камера сгорания

2700л

Внутренние размеры

190x120x120 см

Вторая палата

1300 л

Камера дымового фильтра

да

Режим подачи

Справочник

Напряжение

220В

Потребление масла (кг / час)

Обычный 28

Использование газа (м3 / час)

***

Дисплей температуры

Цифровой дисплей

Температурная безопасность

да

Масляный бак

1400L

Дверца подачи

90×80см

Камин

10 метров

Вид дымового вала

Нержавеющая сталь

1-й. Температура камеры

800 ℃ – -1000 ℃

2-й. Температура камеры

1000 ℃ -1200 ℃

Время проживания

2.0 сек.

Вес брутто

15000кг

Внешние измерения

400x210x300см (без дымохода)

Подачу воздуха следует эффективно контролировать;
Должен быть обеспечен контакт пламени со всеми газами;
Минимальная температура горения первичной камеры должна быть не менее 850 ° C;
Первичная камера сгорания должна быть оборудована средствами дополнительной подачи жидкого топлива.
Первичная камера должна иметь холодную огнеупорную футеровку минимальной толщиной 100 мм.
Во вторичной камере сгорания должны быть соблюдены следующие условия:
Подачу воздуха следует эффективно контролировать;
Должен быть обеспечен контакт пламени со всеми газами;
Размер вторичной камеры должен быть правильно спроектирован, чтобы время удерживания газа было не менее 2 секунд;
Вторичная камера должна иметь холодную огнеупорную футеровку минимальной толщиной 100 мм;
Камера должна включать в себя встроенные вентиляторы горелки сгорания с автоматически регулируемым распределением;
Температура газа, измеренная у внутренней стенки вторичной камеры (не в зоне пламени), не должна быть ниже 1100 ° C;
HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-03-21

a burner for food waste as well as also polythene waste administration


an incinerator for food waste and polythene waste administration. based on our needs we would such as the YD 15C tiny incinerator.Mixed Biomedical waste Incinerator.Contract period: To be chosen by the provider
Negotiation terms:100% prepayment via banks TT after signing of contract.

Please validate your resolution to perform this contract job by sending handout and also your rate quotation for the listed below specification to allow us submit it to the firm incharge of the agreement for their study and additionally authorization.

Sort Of Waste: Mixed Biomedical waste.THE BURNER AS REQUESTED BY OUR CUSTOMER SHALL BE SEMI AUTOMATIC WITH:
WASTE BUCKET/TANK – – – – CONCERNING 2000KG CAPACITY OF FEEDING: REGARDING 600-800Kg Each Time.
THAWING AT ABOUT 150/165 -200 IN 60MINS THE HEATER SHALL USE DIESEL/OIL WITH SMOKESHAFT, ELECTRIC PANNELS, ELECTRIC MOTORS, And So On.
PRODUCTS FOR DISPOSAL: SHARP MEDICAL WASTES.

1. Waste burning ability of device: 100-125 kgs/ personnels.
3. 5.
6. Connected electric great deals: Approximate. 7-8 KW (A/C 3 stage,220 V, 50 Hz).
7. Total area need: 9 m (L) X 8 m (W) X 6 m (H) Each unit without stack

Heaters temperature degree regulated (TIC– – Thermocouple) as well as likewise handle ON––. OFF basis. The consistency on ON– – OFF will certainly depend upon the nature of.
waste, dampness web material, calorific worth, and more along with will certainly vary from waste to.
waste. The gas usage similarly depends upon the frequency of the door.
opening along with strategy of operation of the incinerator. We have in fact mentioned.
approx. expected fuel usage figures.

The Incineration System includes:

I. Key Incinerator with.
A. Main & & & & Additional Chamber Modules appropriately refractory lined, piped & & & & wired.
B. Container lift + DFDV gadget for autoloading and also Deashing.
tool.
II i. 1 No. totally automated Gas Oil burner for main chamber.
ii. 1 No. totally automated Gas Oil heating system for extra chamber.
III. Centrifugal forced draft follower establishing total with electric motor drive, duct as well as also.
dampers, and so forth set up on the regular skid of the gadget to offer:.
Burning air.

Eductor air.
IV. Eductor Establishing for:.
A/c of exhaust gases from 900– – 1000 0 C to around 350 0 C. Keeping the entire system under negative anxiety to stay clear of hot gases/ dirt.
bits hurrying out of billing door.
V. Electric Control Panel along with safety and security as well as protections, as well as likewise Audio/ Visual.
signs as well as.
/ or alarm systems for effective and likewise risk-free treatment of the system.
VI. Electric electric wiring of the device.
VII. Oil tank of 1000 ltrs capability placed on the skid.
VIII. Operating tools and also takes on consisting of– – rake, hoe, shovel (I No. each).
IX. Smokeshaft of 2.5 Mtr elevation.


Double Combustion Chamber Containerized Mobile Incinerator Family Pet Dog&Cat Cremation Installation and Commissioning

Double Combustion Chamber

All waste incinerator design with double combustion chamber. High Temperature, Smoke Treatment,No black smoke, Environmentally friendly.

Containerized Mobile Incinerator

The incinerator mounted in ISO Container before leave factory, free-installation, no incineration house build construction,movable by truck.

Family Pet Dog&Cat Cremation

Special design with movable platform, combustion chamber material and custom made for pets crematory business.

Installation and Commissioning

Clover’s engineers instal,train for most of the region and free-cost train in our factory.

Baltimore teens take out the trash



Youth battle a waste incinerator.

It’s the threat of dangerous air pollution that has students at Curtis Bay’s Benjamin Franklin High School leaving the classroom and demonstrating in the streets of Baltimore.

In Curtis Bay, a neglected waterfront neighborhood at the southwestern fringes of Baltimore, an alliance of environmental activists and neighborhood groups—including an energetic and creative band of high school students—has succeeded in holding off the construction of an enormous trash incinerator project.

The students wowed members of the Baltimore Board of Education this May with a presentation that mixed carefully researched environmental and public health analysis with a hip-hop routine that had board members up on their feet. Greg Sawtell, an organizer with Baltimore-based United Workers (one of several organizations allied against the incinerator), says conversations with school board members since then have left him optimistic that they will oppose the project.

Even though preparation work on the incinerator began last year, full-scale construction is stalled, and the projected completion date has been pushed to 2016 from an initial estimate of 2013. Opponents are reluctant to claim sole credit for the delays, as there have also been financing and regulatory issues, but believe their efforts are sharpening scrutiny and slowing progress.

Talk of the so-called trash-to-energy incinerator plant began some five years ago, after chemical manufacturer FMC Corp closed a pesticide plant, eliminating 130 jobs (including 71 union jobs with the United Steelworkers) and leaving vacant a large parcel of land zoned for heavy industry. The site straddles the Curtis Bay and Fairfield neighborhoods of the city, parts of which have large African-American populations. To many political and community leaders in this deindustrialized and job-starved section of the city—which lies far from the famed Inner Harbor or Fells Point entertainment districts—it seemed like a boon when Energy Answers Inc., an Albany, New York-based power development company, appeared on the scene to propose a plant that would burn commercial and construction waste to produce electricity. Energy Answers billed the plant as a way to restore up to 200 jobs and provide clean, low-cost energy. The proposal came with enthusiastic endorsements from local political leaders, especially Maryland Gov. Martin O’Malley and city Mayor Stephanie Rawlings-Blake.

Initially, Energy Answers struggled to find loans and missed a deadline to secure federal stimulus money. But in May 2011, the project got a big boost when O’Malley signed legislation to help make the plant profitable through a complicated pollution credits scheme that would funnel cash to Energy Answers for generating so-called clean power. (A few days later, Energy Answers gave $100,000 in campaign contributions to the Democratic Governors Association, chaired by O’Malley.)

But for locals, the bloom was already coming off the rose. It had emerged that an estimated 400 to 600 exhaust-spewing trucks carrying waste tires, metals, plastics and construction materials would travel through the streets of Curtis Bay every day to feed the plant. The incinerator itself would burn up to 4,000 tons of waste a day for decades— raising even more alarming public health concerns. In a recent Baltimore Sun op-ed urging cancellation of the project, Gwen DuBois, of Chesapeake Physicians for Social Responsibility, said the plant could emit dioxin, mercury and other heavy metals, which can cause cancer and other diseases.

“What a lot of people don’t realize is just how dirty these plants really are,” says Mike Ewall, founder and co-director of Energy Justice Network, a national organization devoted to helping communities fight dirty energy development. “They are much worse than coal or anything else. And this would be the biggest such plant in the country.” Curtis Bay is already the most polluted zip code in Maryland, Ewall notes, adding that low-income neighborhoods of color are often used as dumping grounds precisely because they lack the political power to fight back.

It’s the threat of dangerous air pollution that has students at Curtis Bay’s Benjamin Franklin High School leaving the classroom and demonstrating in the streets of Baltimore. In their largest action, in late 2013, more than 100 protesters marched from the school to the site of the proposed incinerator—just a mile away. A related petition has garnered more than 2,000 signatures.

Recent Benjamin Franklin graduate Audrey Rozier is a leader of Free Your Voice, the student group agitating to stop the incinerator, as well as the co-author of a rap song devoted to the campaign. “We have our rights according to the amendments / But why do we feel like we’ve been so resented / Ignored, shoved to the side where opinions don’t matter,” goes one verse.

Rozier says the song, which she has performed all over the city, has helped educate the local community and a broader Baltimore audience. “What was amazing to me in the beginning was that people outside the community were going to [build the incinerator], but the people who live here didn’t know anything about it,” she says. “I think that’s changed.”

That disconnect between the political elite and the communities most affected by its decisions is at the heart of the fight over the Curtis Bay incinerator, says Sawtell. In Baltimore and elsewhere, decisions on economic development policies are made by a political and economic elite with little or no input from the working-class residents who must live day-to-day with the consequences. “Community members we’ve talked to say no one asked their opinion before the project was announced,” says Sawtell. “Somehow I think if it was the children of Gov. O’Malley, or the children of Mayor Rawlings-Blake, who were going to be poisoned, the decision would be different.”

The campaign is drawing increasing support, most recently from the nearby Anne Arundel County chapter of the NAACP. Meanwhile, enthusiasm for the plant among politicians seems to have cooled in the face of the protests, Sawtell says, with near-silence on the issue from Mayor Rawlings-Blake in the past few years. The Democratic candidate for governor in this year’s election, Anthony Brown, declined to take a position.

If the construction delays are any indication, even Energy Answers may be losing interest, although the company tells In These Times it’s in “confidential discussions for waste and energy sales” and plans to proceed with the project. Sawtell, however, believes that a major push from opponents now could kill the plan once and for all.

 

by: http://www.radiofree.org/us/baltimore-teens-take-out-the-trash/