Archive: November 11, 2024

GENERAL SPECS FOR HEATERS


Main as well as extra burners: Different electrically spark-ignited major heating units along with second heating systems with automatic control will certainly be used to accomplish the specified temperature level needs in the additionally added as well as major chambers. The fires of the main and also additional heating units will not strike the burner wall surface surfaces or floor.
The main burning chamber need to:

1. Be accepted as the primary burning zone.
2. Be geared up with a burner/s melting gas/fuel or reduced sulphur fluid gas.

3. Make certain key air supply is controlled efficiently

Make sure minimal leave temperature degree is not a lot less than 850oC

Air supply: Air supply in the secret and likewise 2nd chamber requirement to be managed in between 30% -80% as well as 170%- 120% of stoichiometric quantity specifically. The combustion air will certainly be offered by means of a various forced draft fan after accounting for the air provided via burners.The second combustion chamber have to:

1.

3.

4.

5.
6. Ensure the gas temperature level as assessed against the inside wall surface in the secondary chamber & & & & not in the fire area, is very little less than 1100oC.

7. Make sure the oxygen web content of the released gases is not much less than 11%.
Make specific both main along with the burning temperature levels are maintained till all waste has actually been completely combusted

lnsulation: lnsulation to be utilized for stonework, boosted concrete, or non-combustible item will secure versus damages to the framework from extreme cozy as well as shall be of a density to limit the outside covering to an optimum temperature level of 66 ° C in an ambient temperature of 21 ° C when the heater is running at complete capacity.

Refractory: Refractory shall be #super responsibility # along with heat-resistant to a minimum of 1100 ° C in the vital chamber in addition to 1250 ° C in the secondary chamber. Refractory will also be abrasion immune in the prlmary chamber, built of plastic or castable kind refractory, developed to prevent protruding and additionally damage as a result of warmth tension, efficient in maintaining greater than twice the per hour burning price along with securing against leakage of fluids, as well as likewise with a minimal thickness of 11O mm for wall surfaces and also fire places


производитель мусоросжигателей для домашних животных

Технические требования к устройству сжигания, поставщику мусоросжигательного завода
1. Две системы предполагается установить на юге Королевства Саудовская Аравия. Эти две системы будут использоваться персональными властями для сжигания различных видов наркотиков. Необходимо предоставить все устройства по запросу.
2. Гарантия: на стендовые системы должна быть предоставлена гарантия 3 года с даты утверждения. Все необходимые дополнительные компоненты, профилактический ремонт, а также восстановительное обслуживание должны быть включены в стоимость, а также предоставлены клиенту.
3. Должны быть предложены все необходимые электрические и водные соединения.
4. Обе системы должны быть высшего качества и экологически безопасны.
5. Производительность каждой системы должна быть до 100 кг / час.
6. В системе должно быть автоматизированное кормление.
7. Каждая система должна включать в себя две камеры для сжигания, одно основное пространство для сжигания лекарства, а также еще одно пространство для сжигания газов, выделяемых в результате основного сжигания.
8. Духовка должна быть изготовлена из коррозионно-стойкой стали толщиной не менее 6 мм.
9. Каждая система должна иметь высокую надежность при выделении различных видов лекарств, а также должна иметь эффективность 99,9% для сжигания органических продуктов.
10. Количество отходов не должно превышать 5%.
11. Система должна иметь автоматическую систему зажигания.
12. Система должна использовать дизельное топливо (HSD) в качестве топлива и не должна потреблять более 8-10 л / час.
13. Каждая система должна быть снабжена резервуаром для хранения топлива размером, подходящим для работы системы в течение одного полного дня.
14. Уровень температуры в первичном помещении должен составлять 850 C ± 50 C. Система должна быть дополнительно аттестована для работы до 1050 C ± 50 C. Система должна продолжать работу, а также должна быть снабжена бетонным слоем. изолятор соответствующей плотности.
15. Духовка должна быть снабжена теплым изолятором для облегчения работы.
16. Газ должен оставаться в дополнительной зоне не более 1,5 секунды.
17. В зоне основного горения должно быть не менее 2 обогревателей.
18. Вторая зона горения должна иметь один обогреватель.
19. Каждая система должна иметь дверцы для золы, отвод воздуха к дымовой трубе, а также окна, позволяющие смотреть внутрь и для обслуживания.
20. Каждая система должна иметь систему фильтрации для обработки газа с 2 баками, использующими среднюю воду. Каждый резервуар для воды должен иметь емкость 1000 л и должен ремонтироваться в системе, а также предлагаться с указанием уровня воды.
21. Каждая система должна иметь особые инновации для разделения продуктов средней части, а также влажности после обработки газа.
22. Каждая система должна иметь возможность охлаждения после процедуры.
23. Каждая система м должна быть предложена с выхлопной трубой диаметром 250 мм и высотой 10 м. Основание выхлопной системы должно быть 1000 мм. Выхлопная труба должна быть 6 мм, а также должна быть снабжена теплоизолятором. Выхлопная система должна быть снабжена знаком давления. Он должен дополнительно предлагаться с лестницей и молниеотводом.
24. Электроэнергия: 220 вольт, 3 фазы, 60 Гц, а также двигатель не менее 15 л.с.
25. Каждая система должна быть снабжена панелью управления, а также индикаторами и необходимыми охранными устройствами и сигнализацией. Панель управления должна показывать хотя бы уровень температуры как в ключевой, так и в дополнительных областях, а также в форсунках фильтров, а также в нагрузке.
26. Каждая система должна предлагаться с системой безопасности на случай поломки или неисправности любого типа части системы.
27. Соответствующие средства индивидуальной защиты должны быть обеспечены:
A. Теплостойкая одежда для 20 человек.
б) Термостойкие очки на 20 человек.
28. Все элементы каждой системы необходимо перекрасить в серебристый цвет, устойчивый к высоким температурам.

incinerador de china

El tamaño de la pila debe estar de acuerdo con las recomendaciones del fabricante. Las pilas serán del tipo de aire forzado y

Totalmente autoportante y desacoplado a estructuras cercanas. Como mínimo, las alturas de las pilas deben minimizar

flujo descendente de las emisiones de la chimenea debido a las influencias aerodinámicas de las estructuras cercanas y se calculará de acuerdo con

con DoD 4715.05-G, Documento de orientación de referencia ambiental en el extranjero. Las pilas deben estar provistas de

tapas de intemperie de acero resistentes a la corrosión “.

Una caja de control que garantiza el ciclo completo de combustión.

medical waste incinerator

Australian combustion engineering proprietary 5 25kg/hour
dual chamber(LPG) incinerator or equal approved. incinerator
casing to be mild steel with 125mm refractory lining including
primary and secondary chamber, insulated draft section above
secondary chamber, package burners, digital temperature control
systems, ash rake and poke, second door in primary chamber,
manual loading chute, semi automated operated counter balanced
loading door with loading tray complete with stainless steel flue
recommended spare parts.

доступные мусоросжигательные заводы

ПЕРЕРАБАТЫВАЕМЫЕ ОТХОДЫ ПЛАСТИКА (НЕ ПВХ) 218 693
КАРТОН 85 046
ДОКУМЕНТ 4 956
ПВХ 15 115
ОПАСНЫЕ ОТХОДЫ МЕДИЦИНСКИЕ ОТХОДЫ 1084
ТВЕРДЫЕ ОТХОДЫ, ЗАГРЯЗНЕННЫЕ УГЛЕВОДОРОДами 300 680
ФИЛЬТРЫ МОТОРНОГО МАСЛА Б / У 85,423
ЗАГРЯЗНЕНИЯ, ЗАГРЯЗНЕННЫЕ УГЛЕВОДОРОДОМ 88 680
ОБЫЧНЫЕ ОТХОДЫ ВОЛОКНА 14078
ИСПОЛЬЗУЕМЫЕ ВОЗДУШНЫЕ ФИЛЬТРЫ (АВТОМОБИЛЬНЫЕ И ТАКЖЕ АНАЛОГИЧНЫЕ) 23 149
ИНДИВИДУАЛЬНЫЕ ЗАЩИТНЫЕ СРЕДСТВА (СИЗ), ВКЛЮЧАЯ ЗАРАЖЕННУЮ ОДЕЖДУ И АНАЛОГИЧНЫЕ ЧАСТИЦЫ 130 861
Трупы свиней / бродячие домашние собаки, а также экономичные мусоросжигательные печи для туш больших домашних животных ––.
Производительность в ассортименте до 300 кг / Скорость плавления прибл. 50 кг в час

Нагреватель с регулируемой температурой. Горелки должны соответствовать нормам контроля за загрязнением окружающей среды. Современные технологии: прочное покрытие, чтобы быть высококачественной, прочной, надежной, доступной по цене Горелкой с соответствующим управлением, очень простой в эксплуатации, а также самонесущей. Системы должны быть предварительно собраны, предварительно смонтированы, смонтированы и проверены перед транспортировкой / экспортом.

Примечание: Сопоставимые современные технологии и / или предложения участников тендера.

В рамках консультаций по экологическим инструментам и технологиям и совместных закупок это Закупочное / Нотариальное бюро приветствует кандидатов на предварительный квалификационный отбор с целью широкого отбора квалифицированных компаний для участия в вышеупомянутом тендере.
В поставку войдут специальные устройства для эффективного мониторинга отходов, как указано выше, для совершенно новой фирмы по индивидуальному управлению контрактами с подготовленными процедурами в 2013 году в Индонезии, а также в Таиланде, а также в 2015 году в Западной и Восточной Малайзии для их выполнения. экспертные услуги в целях соблюдения требований федерального правительства по безопасному удалению отходов животноводства в регионе, а также для удовлетворения более высоких технических стандартов в этой конкретной области, чтобы обезопасить население и охватить инфекционные и заразные инфекции, а также условия, вызванные домашними животными . Распространение совершенно новой болезни свиней, подобной «инфекционной болезни Нипах», впервые заметной в 1998 году в Юго-Восточной Азии, которая вызывает болезни и летальные исходы как у людей, так и у свиней, снова растет; а также преждевременная гибель растений и хряков была зарегистрирована на свинофермах в Малайзии, а также в других местах в Юго-Восточной Азии.

Dual-chamber controlled air heater or dual- chamber pyrolytic heater


Types of burner style appropriate: Dual-chamber regulated air heater or double- chamber pyrolytic incinerator

Products of building: The incinerator shall not have any type of type of asbestos, asbestos-containing compounds, mercury thermostats, as well as additionally mercury switches. Refractory products shall have the capability to satisfy pertinent standards under ISO TC33 along with CEN/TC 187. Waste feed system right into the combustion chamber batch or consistent loading: For constant loading, the automatic payment ram or auger feed system shall be capable of instilling percentages of waste at normal periods in addition to should certainly have the capacity to prevent waste from being fed when the burning chamber temperature is much less than 850 ° C. In addition, the waste feed need to just be able opened up at or listed below 50 ° C in an ambient temperature level of 21 ° C.Primary burning chamber: Shall be built with a housing (reinforced to hold up against interior stress without deflection or damage to the various other or refractory aspects) supported by an architectural framework and provided with refractory cellular lining and also insulation
Ease of access doors, openings, and additionally spaces: All access doors, openings, and likewise spaces shall be sealed to stop discharge of smoke as well as exhaust gas and likewise to obstruct admission of air throughout burner procedures. Doors subjected to flame or direct warm of burning gases shall be lined with the specific same kind as well as likewise density of refractory mobile lining and insulation as that utilized in the burning chamber

Grate system for the primary chamber Transferring grate, taking a trip grate, reciprocating grate, or turning drum grate

Main combustion chamber temperature degree # 850 ° C without cool locations

Additional combustion chamber: Shall be created with an exterior case (reinforced to sustain internal stress and anxiety without deflection or damages to the refractory or different other components) along with used with refractory cellular lining as well as insulation

Secondary burning chamber temperature level 1100 ° C or higher

Second burning chamber house time # 2 seconds after the swan song of air in the second chamber


portable medical waste incinerator manufacture companies in china

Capacity: 20KG/Hr, Temp Range: 600 Deg. C – 1100 Deg. C

Fuel Supply: Natural Gas/Diesel

Dual Combustion Chamber Complete Scrubbing System (Dual

Resultant Gas Washer), Dual Blower, Chimney Height: 8m

Electric Supply: 220/240Volt, Single Phase

1.    Type of waste: Trash
2.    Any other type:
3.    Quantity of waste generated per day in kg: (50 Ton per day) SOW
4.    Duration – incinerator will be used per day: (Minimum 12 hours) SOW
5.    Approximate moisture content:
6.    Local incinerator operating and emission standards: US-EPA
7.    What is the height of the chimney required: Not known
8.    Fuel proposed to be used: Deiseal Oil
9.    Availability of power and type: 220 or 110
10.    Details of space available: Plenty of space
11.    Do you require an automatic loading system: [**] Yes  [**] No
12.    Do you require a gas scrubbing system: [**] Yes  [ ] No
13.    How soon do you require the system to be delivered: 30
14.    Any other specific requirements:
15.    Nature: (Solid/Semi-solid/Liquid)

infectious waste pyrolysis machine chinalarge animal incinerators

Major components are – Ethanol, Paraffin, Silicon, Aluminium chloro hydrate, Bentone ,LPG

quote for incinerators for industrial chemical wastes treatment,

1 burning rate must be Average 30kgs/h
2 inside of chamber material must be refractory concrete cement
3 it works in three system diesel oil/ Natural gas or LPG
4 voltage must be 220V

5 inside temperature first must be 1000c  and second must be 1200c
6 pipe length must be 20 M

Our requirements are  for 125 kg/hr and 42 kg/hr, please send quote with catalog for both options
We are currently dealing in Defense Related Equipment, Construction Assistance and Medical Equipment, Modular Solutions

for Hospitals, Waste Management System, CSSD, Hospital Furniture and Services. We are based in the Capital city of

Pakistan i.e. Islamabad ,where there are all the head offices of Military and Govt. institutions. We have the capacity to

Participate in tenders and we also have a strong network of energetic/active dealers and sales staff in Pakistan and

Afghanistan.
5 incinerator 15 kg the specifications High temperature incinerator​99% combustion efficiency Temperature up to 1200°C or

Smoke and smell free Excellent heat retention Electric powered​ Fast heatup times Temperature Up to 1200°C or as required

Capacity​15 Kg Burning Efficiency 98% Noise- <78db Power – Electric Chamber​Single / Dual chamber Safety Alarm Emergency

vent Monitoring device​ Air Pollution Control Device​ CE and ISO Certified

I ‘d like to ask you about a power plant by burning waste. We have many of camps for displaced people in Syria, and we

want to buy a plant to generate electricity by municipal waste incineration Please send me an offer or any details.

incinerador médico de china

los siguientes incineradores en contenedores. (Cocina y alojamiento y plantas de aguas grises y aguas negras que eliminan los desechos) Necesitamos un incinerador si cada función está separada, están todos en un incinerador que necesitamos informar. Planta que instalamos para nuestra barcaza de alojamiento utilizada en un proyecto de construcción marina en alta mar. Se alojarían 200 personas a bordo.
RECOMENDACIONES PARA INCINERADORES DE RESIDUOS

China capacidad incineradora médica
Incinerar mínimo 80 kg / hr X 12 hrs por día
Eliminación de flujos de desechos peligrosos y no peligrosos (por inventario de desechos)
Unidad móvil (preferencia montada sobre patines con puntos de elevación)
Especificaciones de diseño
? Los incineradores deben tener una cámara de combustión secundaria con un rango de temperatura mínima de 900c
Las corrientes de desechos líquidos se incinerarán mediante un sistema de inyección de líquidos adecuado.
? Los incineradores se instalarán con alarmas visuales para alertar operaciones de baja temperatura en la cámara secundaria
Entorno operativo y condiciones ambientales

El paquete de incineradores se diseñará para funcionar en las siguientes condiciones:
Temperatura promedio diaria máxima / mínima de junio, 21-39 ° C
Temperatura promedio diaria máxima / mínima de enero, 2-12 ° C.
Incinerador de desechos médicos,
aprox. 0,4 metros cúbicos,
combustible diésel / alimentación de red,
control termostático de temperatura,
ciclo programable