печь для сжигания домашних животных
Завод по сжиганию отходов должен иметь контрольную панель для своей процедуры. На панели управления у нас будет визуальный
экран уровней температуры камеры. Этот эстетичный дисплей должен управлять горелкой и следить за ее производительностью.
Мощность разрушения по весу будет 60 кг / час.
Он должен работать не менее 10 часов в день.
Этот мусоросжигательный завод должен иметь возможность уничтожать все горючие отходы, производимые медицинскими учреждениями, частными центрами, исследовательскими лабораториями,
институты и так далее.
Спецификация стиля: типы медицинских отходов A, B, C, D, а также E.
Поставка, установка и тестирование ВНУТРЕННИХ РАЗЪЕМНЫХ БЛОКОВ в хранилище отходов с достаточными возможностями для обслуживания внутреннего
температура на уровне 14 градусов по Цельсию как летом, так и зимой
medical incinerator primary combustion price
Our normal activities generates 2-5 tons of assorted waste materials per day which range from condemned carcasses, and medical incinerator primary combustion price
other wastes all which need to be incinerated at above 800Centigrade measured flue exhaust gas.To be used by small
hospitals and clinics to safely dispose of infectious and pathological wastes.
Load Capacity in the range of up to 200 kg
– Burning Rate approx. 50kg/Hour –
Incinerators to be very effective, fuel efficient with high / low capacity burn rates
and to be designed to meet the Norms of Pollution Control / DEFRA, etc. Technology:
Temperature Controlled Burner. Heavy-duty casing, to be a quality, rugged, reliable, economical Medical Waste
Incinerator with relevant control, easy to operate and self-contained. Type of Fuel: Diesel / Oil or Petrol.
Units to be pre-assembled, pre-piped, pre-wired & tested before Transport / Export.
Within the framework of an environmental and medical equipment & technology consultation and joint purchasing, this
Procurement Bureau invites applicants for pre-qualification in the aim of primarily selecting capable companies to bid
for the above tender.
The supply will comprise the special equipment for effective waste management as mentioned above for a new private
environment contract management company with planned operations 2013 in Indonesia and Thailand, and 2014 in West & East
Malaysia to carry out those professional services in order to comply with the governments safety disposal requirements
for medical and hospital, clinical waste in the region and to meet the higher technical standard in this particular
field.small incinerators with filter (with least minimum pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr,
20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any kind (including hospital
wastes) per day or per hour. Should it be with no smoke, no fumes, no odour (smell), no dust, no emission of solid
particles and with least minimum pollution (within national and international standards). Must be environmentally
healthy and acceptable with international standards. Should not be with water scrubbers. Ash contents after burning
should be 3-4%.
diseño de quemador de centro de salud
INCINERATEUR DE DECHETS HOSPITALIER centro de salud formato incinerador
TÉCNICAS DE ESPECIFICACIONES.
Capacidad dañina de 55 Kg / h jour de déchets hospitaliers avec un p ?. C. i jusqu ‘à 3.200 Kcal / Kg
1) Tipo de déchet
hospitalario
2) Pouvoir calorifique inférieur 3.200 kcal / kg
3) Humedad 20%.
4) Teneur en cendres et / ou inertes 8%.
5) Capacidad nominal nociva de 55 kg / h.
6) Cantidad cámara de combustión 1,65 m3.
7) Monto cámara postcombustión 2,1 m3.
8) Tiempos de transporte de fumées en mensaje quemado / seg.
13) Gasoil prévu inflamable.
14) Br? Leur en chambre de combustion nbr ?: 1.
15) Br? Leur en chambre de postcombusttion nbr ?: 2
CONSTITTUCIÓN DE L’APPAREIL.
1. CARGO.
Système de chargement hydraulique afin de pouvoir cargador de batería le 4 en toute sécurité même durant child fonctionnement et
aussi assurer la puissance devastating globale de 450 kg / j?
Le système comprend?:.
1-1Trémie de chargement de forme parallélépipédique de 0,5 m3 de volume, réalisée en t? Le d’acier, bridés sur la paroi
frontale de la chambre de burning et munie d’un couvercle à charnières actionné par vérin hydraulique ?.
¿Dimensiones?:.
oLongueur 1200 mm.
oHauteur 700 mm.
oLargeur 600.
1-2Un poussoir hydraulique assurera le chargement de la chambre de combustion.
1-3 Une porte de chargement de la chambre de combustion constituée d’une guillotine à vérin hydraulique revêtue
de réfractaire.
1-4Un main hydraulique put piloter tous les vérins de commande, comprenant ?: réservoir, pompe, électrovannes et
tuyauteries
2. CHAMBRE DE COMBUSTION PRIMAIRE
2-1- Le bati est une structure métallique cylindrique revêtue intérieurement d’une couche d’isolant et d’une
couche de réfractaire.
2-2-Volumen intérieur ?: 1,65 m3.
2-3-Aménagement.
? portillon de décharge des cendres ?: frontal ?; monté sur double charnière et revêtu de réfractaire avec hublot
d’inspection.
? La connexion à la chambre de chargement est revêtue de réfractaire.
? La conexión de la cámara de combustión y la cámara de combustión del artículo est revêtue de réfractaire.
? Setup des bruleurs.
? Configuración del sistema de circulación del aire comburente.
? Installment des sondes de mesure de la température.
? Le bac de récolte des cendres est en acier au carbone sur roulettes, équipé de racloir métallique permettant
l’évacuation manuelle des cendres.
3. BRULEUR DE LA CHAMBRE DE COMBUSQTION.
Un bruleur de kind à une flamme à l’air soufflé, alimenté the same level gasoil, équipé des dispositifs de sécurité Puissance
thermique installée 165 KW.
4. AIRE COMBURANTE.
Le système de distribution y dosificación de l’air primaire en chambre de burning comprend?:.
? Centrífuga Ventilateur.
? Canalizaciones de distribución de aire.
? Sistema de circulación de aire a 2 canales.
? Soupape de régulation de l’air motorisé selon les phase de cycle de fonctionnement et de la température
5. QUEMADURA DE CHAMBRE DE POST.
5-1- Cámara de quema de artículos est installée au dessus du foyer de combustion, elle est constituée d’un
cylindre métallique revêtu intérieurement d’une couche d ‘isolant et d’une couche de matériaux réfractaires.
5-2- ¿Volumen interior ?: 2,1 m3.
Est dimensionnée put pouvoir garantir un Temperature de fumée de 2 secondes à 1100 ° C avec un pourcentage d’oxygène libre
d’au moins 6%.
5-3 -Accesorios.
? Trappe de visite boulonnée frontal puesto permettre l’inspection périodique.
? La intermediary à la chambre de burning est tapissée de réfractaire.
? Configurar les br? Leurs.
? Instalación de sondes de mesure température.
6. FABRICACIÓN DE L’AIR COMBURANT DE LA CHAMBRE DE POST COMBUSTION.
? Centrífuga Ventilateur.
? Tuyauteries de distribution d’air.
? Serie de vannes de circulación de aire.
? Soupape de régulation de l’air soufflé asservi par la sonde du débit d ‘oxygène
7. BRULEUR DE LA CHAMBRE DE MESSAGE COMBUSTION.
Sont prévus 2 br? Leurs du type à l’air soufflé au gasoil équipés des dispositifs de sécurité.
A la mise en route du cuatro les deux br? Leurs sont allumés pour assurer la température minimale d’au moins 1100 ° C ?;
ils restent en marche sucesivement pour maintenir la température constante.
Puissance thermique installée (290 + 350) KW.
8. QUIMICA DE EVACUACION.
Constitué el mismo nivel un avenue métallique vertical de 8 m de largo installée au-dessus de la chambre de COMPUTER, diamètre 630 mm
en t? le d’acier au carbone avec garnissage intérieur en réfractaire
9. ARMOIRE ELECTRIQUE DE COMMANDE ET DIRECTRIZ.
Composée de?:.
? Circuito 380 V- 50 HZ-3 etapas.
? Voyant sous stress.
? Commande d’arrêt général.
? Voyant état des bruleurs.
? Affichage des températures des deux chambres.
? Minuterie des temps des ciclos.
? Una variación des vitesses des ventilateurs.
? Le tableau et les cablages sont prévus aux règles CEI avec seguridad IP 55.
? El microprocesador puso le contr? Le et la régulation des températures, ainsi que les cycles d’opération.
? Cablages réalisés selon les règles CEI.
10. INSTRUMENTATION DE CONTROLE ET DE MESURAGE CONTINU.
Les dispositifs suivants sont prévus?:.
1) ¿Termopares para la mesure de la température en chambre de combustion? et postcombustión, à la sortie de
l’échangeur dans la area d’entrée du filtre.
2) Système de mesure de la concentración d’oxygène dans les fumées humides a la sortie de la chambre de postcombustión
constitué de?:.
? Sonde de mesure de l’oxygène à l’oxyde de zirconium.
? Membrana Pompe à la.
? débitmètre
Contact Us
Nanjing Clover Medical Technology Co., Ltd.
Tel: +86-25-8461 0201
Fax: +86-25-8461 0406
Website: www.inciner8.cn
Email: [email protected]
Service Skype: clover-incinerator
Pусский: www.hiclover.ru
中文: www.haiwo.net
Photo Gallery: www.eclover.net
Clover News: www.incinerator.info
Facebook: www.facebook.com/hiclover
Twitter: twitter.com/hiclovercom
YouTube: youtube.com/c/IncineratorClover
Send Message by below contact form:
waste incinerator manufacturers china
Capacity Not less than 500Kg/hr.
Operation 24hr-7days/week continuous operation.
Combustion chamber 2 combustion chamber.
Temp. First combustion chamber 800-1000 C.
Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C.
Combustion Efficiency 99.99%
Retention time Of the flow gases not less than 2 Sec in the hot portion.
Excess Oxygen concentration Of primary combustion chamber 3-6% max.
Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the same time prevent the Temp. of the outside body of the chamber not higher than 70 C.
Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and the doors should be kept under negative pressure during the operation.
Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.
Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled circuit many times before treating/ discharging into the sewage system in compliance with KEPARS.
Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system including sensors.
Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any flow disturbancies.
Sampling point Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and equiped with suitable stairs from ground to the port with comfortable slope.
Ash Removal It should be auto ash removal system.
Fuel It should be dual system, such as diesel and natural gas.
Feeding System Should be auto feeding system into primary chamber.
Control Room Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital Temp. indecation for the primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also Auto operation, burnures on/off auto lamps switch, auto start/stop for air emission control system, auto gas continuous monitoring system reading and print out of gas emission parameters…etc.
Cooling System The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling if the Temp. will be heigher than 1100 C.
Inter-lock system The incinerator should be equiped with inter-lock system to prevent feeding the waste to the primary chamber if the combustion Temp. less than 500 C.
Flue treatment and cleaning To consist a combined system (wet/dry), using water, lime, active carbon and ceramic filters.
Quenching system/Heat exchanger Should be made and manufactured from anti corrosion and acid attack materials such as stainless steel 316 or equivalent.
Noise Level Not more than 85 dBA during normal operation.
Inaddition The desigh should insure that responsive fail-safe control systems are used.
The incinerator should be installed inside closed suitable building with good aeration and ventilation system. The building has facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and waste containers, and cool storage area…etc.
The quotation should included list of original spare parts for 7 years.
The quotation should include supervising, starting up and training of the operators and ministry of health engineers inside/outside Kuwait.
Detailed drawings, catalogs should be included.
поставщик горелки
«ПИРОЛИТИЧЕСКОЕ» сжигание, контролируя газификацию отходов.
Производитель инсинератора должен избегать выбросов черного дыма и большой пыли во время загрузки.
Это позволит снизить количество отходов на 98%.
Он должен иметь возможность удерживать разряд во втором помещении с нахождением газа не менее 2 секунд.
Сжигание должно происходить без заметного дыма и неприятных запахов.
1.0 Основная запальная горелка должна обеспечивать розжиг отходов до температуры 850 ° C, а также должна отключаться для экономии топлива.
Камера сгорания ключа должна быть изготовлена из толстой стальной пластины, а также внутренняя футеровка системы
полный слой огнеупора и высокоэффективной изоляции.
Минимальный внутренний диаметр дымового вала:? 400, а также его высота над уровнем моря: 8 м.
china lab waste incinerators
.Necessary tooling and gauges shall have also to be supplied.
14.Supplier shall have to arrange free training for user staff in operation and maintenance
15.Supplier shall have to provide related drawings/diagrams (civil, mechanical and electrical etc.)electrical load and
electrical circuitry
16.Warranty period shall be 24 months from date of proving test.
We are in the process of building a new hospital waste treatment plant and we are evaluating different technologies
from around the world. We are looking to incinerate approx. 1 to 2 tons of bio-medical waste per day using LPG for
heating. Please send me all general information and quotes for machines of all ranges that could meet our needs.
Also, please include emissions reports of all of the various machines that could be of interest to us especially with
regards to dioxins and furals as well as lists of recommendations from past clients.
medical hospital incinerator
Capacity: 30 Kg.
destruction capacity: 3.000 kcal/kg diesel.
max consume: 2.5 gal per hour.
1 camera:
1 burner capacity: 80.00 kcal
Type: K (Ni-CrNi)
enter size: 500x500mm
ash door: 190 x 250mm
all kind of medical, hospital, veterinary and industrial wastes by Incineration Process.
So, we’re interested with your Incinerator plants, and we’d like to get quotation and key features description of
different capacities of your Incinerator plants, concerning: small models (5 – 25 kg/hr); medium models (25-50 kg/hr)
and big models (50-100 kg/hr) and plus.
2 camera:
1 burner capacity: 80.000 kcal.
Air conbustion: 0.5 HP
Type: K (Ni-CrNi)
- Total waste produced per day: 10-12 tonnes;
- Hours of Operation: 10 hours a day;
- Fuel requirement: Diesel or waste oil preferred but LP gas will be considered;
small capacity incinerators
1 Basic Plant Design An approved plant must have four distinct sections that demonstrate three principles of Turbulence, Residence Time and Temperature are inbuilt in the plant design .The regulated sections may include but not limited to:
Overall plant layout.
Feed chamber/ charging
Primary Combustion Chamber.
Secondary Combustion Chamber.
Particulate Scrubbers
Acid Gas Scrubbers
The stack/ chimney.
2 Feeding And Charging Controlled hygienic, mechanical or automatic feeding methods have to be used which will not influence the air temperature in the primary and secondary chambers of the incinerator negatively.
No waste is to be fed into the incinerator:
1. Until the minimum temperatures have been reached.
2. If the minimum combustion temperatures are not maintained.
3. Whenever the previous charge has not been completely combusted in the case of batch feeding.
4. Until such time as the addition of more waste will not cause the design parameters of the incinerator to be exceeded.
3 Primary Combustion Chamber The primary combustion chamber must:
1. Be accepted as the primary combustion zone.
2. Be equipped with a burner/s burning gas/fuel or low sulphur liquid fuels. Other combustion methods will be judged on merits.
3. Ensure primary air supply is controlled efficiently
4. Ensure minimum exit temperature is not less than 850oC
4 Secondary Combustion Chamber (Afterburner). The secondary combustion chamber must:
1. Be accepted as secondary combustion zone.
2. Be fitted with secondary burner/s burning gas or low sulphur liquid fuel or any suitable fuel.
3. Ensure secondary air supply is controlled efficiently.
4. Ensure flame contact with all gases is achieved.
5. Ensure residence time is not less than two (2) seconds.
6. Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.
7. Ensure the oxygen content of the emitted gases is not less than 11%.
8. Ensure both primary and the combustion temperatures are maintained until all waste has been completely combusted
5 Particulate Removers A mechanical particulate collector must be incorporated after secondary combustion chamber for removal of particulate pollutants entrained in the flue gas stream. The particulate collectors may include any of the following or a combination thereof:
Cyclone separator
Electrostatic precipitators
Fabric filters
6 Chimney / Stack 1. The chimney should have a minimum height of 10 meters above ground level and clear the highest point of the building by not less than 3 meters for all roofs. The topography and height of adjacent buildings within 50 meters radius should be taken into account.
2. If possible the chimney should be visible to the operator from the feeding area.
3. The addition of dilution air after combustion in order to achieve the requirement of these guidelines is unacceptable.
4. The minimum exit velocity should be 10 m/s and at least twice the surrounding wind speed (Efflux velocity = wind speed x 2) whichever is higher to ensure no down washing of exiting gases.
5. Point for the measurement of emissions shall be provided.
7 Instrumentation Instrument for determining the inside wall temperature and not burner flame temperature must be provided for both primary and secondary chambers.
2. An audible and visible alarm must be installed to warn the operator when the secondary temperature drops to below the required temperature.
3. In addition to the above the following instruments may also be required.
A carbon monoxide and/or oxygen meter/recorder
A smoke density meter/recorder
A gas flow meter/recorder
A solid particulate meter/recorder
Any other instrument or measurement that may be considered necessary
8 Location / Siting 1. Must be sited in accordance with the relevant local municipal authority planning scheme, the topography of the area and be compatible with premises in the neighborhood,
2. Must be housed in a suitably ventilated room.
9 Emission Limits 1. Combustion efficiency:
Combustion efficiency (CE) shall be at least 99.00%
The Combustion efficiency is computed as follows;
C.E= % CO2 x 100
% CO2 + CO
2. The temperature of the primary chamber shall be 800 ± 50o C
3. The secondary chamber gas residence time shall be at least 1 (one) second at 1050 ± 50o C, with 3% Oxygen in the stack gas.
4 Opacity of the smoke must not exceed 20% Viewed from 50 meters with naked eyes
5. All the emission to the air other than steam or water vapour must be odourless and free from mist, fume and droplets.
6. The Authority may require that the certificate holder have tests carried out by an accredited institution to determine stack and/or ground level concentrations of the following substances.
Cadmium and compounds as Cd
Mercury Hg
Thallium Tl
Chromium Cr
Beryllium Be
Arsenic As
Antimony Sb
Barium Ba
Lead Pb
Silver Ag
Cobalt Co
Copper Cu
Manganese Mn
Tin Sn
Vanadium V
Nickel Ni
Hydrochloric HCL
Hydrofluoric acid HF
Sulphur dioxide S02
7. A 99.99% destruction and removal efficiency (DRE) for each principal organic hazardous constituent (POHC) in the waste feed where:
DRE = [(Win – Wout)/Win]*100
Where: Win = mass feed rate of the POHC in the waste stream fed to incinerator, and
Wout = mass emission rate of POHC in the stack prior to the release to the atmosphere.
8. The average dioxin and furan concentration in the emissions should not exceed 80ng/m3 total dioxins and furans if measured for a period of 6 to 16 hours.
Note:
All pollutant concentrations must be expressed at Oo C and 1.013 x 10 5 N/m2, dry gas and 11% oxygen correction.
Oxygen correction is computed as:
Es = 21 – Os x EM
21 – OM
Where: Es = Calculated emission concentration at the standard percentage oxygen concentration
EM = Measured emission concentration
Os = Standard oxygen concentration
OM = measured oxygen concentration
10 Operation 1. Materials destined for incineration should be of known origin and composition and must be only incinerated in a furnace that is registered for the particular type of waste.
2. A record must be kept of the quantity, type and origin of the waste to be incinerated.
3. The incinerator must be preheated to working temperature before charging any waste.
4. The incinerator must not be overcharged.
5. The incinerator must be in good working order at all times and must not be used if any component fails. Any malfunction should be recorded in a log book and reported to the relevant authority.
6. The incinerator operator and all relevant staff must be trained to the satisfaction of the relevant control authority.
11 Housekeeping The site where the incinerator is built must:
1. Have running water.
2. Have a solid floor.
3. Have lighting if 24hrs operation
4. Have fly ash containerization and storage before disposal.
12 Health & Safety (Protective Gear) 1. Staff handling waste must be well trained on safe handling of hazardous wastes
2. Staff must be provided with appropriate protective gear such as, gas mask, aprons, gumboots, helmets, gloves, goggles.
3. Caution and Warning signs must be provided.
4. Fire fighting equipment must be provided
5. There should be no smoking or eating on the site.
incinerador de animales
Control lógico programado de 2 quemadores
Rango de tiempos de combustión preestablecidos
Programa de control de eficiencia de quemadores para ahorro de combustible con ventiladores en funcionamiento constante
Monitoreo de temperatura con pantallas separadas para cámaras primarias / secundarias
Auto control
Control manual
Control de temporizador 0-24 horas
Control de temporizador de diversión integral
Características de funcionamiento
Tiempo hasta la temperatura: 35 minutos
Consumo de combustible: gasolina u 8 litros por hora (diésel) o menos
Capacidad de combustión alrededor de 30-40 kg / h
Panel de control resistente a la intemperie (Ip65) con PLC que muestra el funcionamiento y las temperaturas
La carga recomendada se realiza mediante ‘recargas’ regulares para una combustión eficiente
Los quemadores de la cámara principal se apagan automáticamente a 900 ° C para ahorrar combustible
Los residuos de ceniza seca pueden eliminarse mediante vacío Se requiere una unidad
Suministro de electricidad: 230 V, 50 H, 10 amperios, monofásico
Máquina enviada en dos secciones
Chimenea montada en bridas fabricadas