Archive: November 20, 2023

incinerator 500kg per

Composition of the refractory lining:

* Insulation:

– Operating temperature:                1000 ° C max

– Nature:                                   Calcium Silicate

– Thickness:                              80 mm

* Refractory:

– Operating temperature:                1650 ° C max

– Nature:                                   Refractory bricks with 42 alumina

– Thickness:                              110mm

 

Burner combustion:

 

– The combustion chamber is equipped with a burner to line to ensure correct temperature for the total destruction of

waste combustion;

– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.

Air fan:

– A primary air and secondary air fan provides the necessary oxygen delivery

– There is a motor operated valve that controls the flow according to the combustion.

– The pressure of the fan is 500 mm CE to pierce the mass of waste during combustion.

The Medical Waste Disposal Incinerator units shall be of Dual or Multiple Chamber type that thermally degrades

combustible medical wastes of varying heat content using a two-stage or multiple stages combustion processes. That is

first stage of thermal waste degradation in the primary chamber and second stage of smoke burning (flue gas treatment)

in the secondary chamber. The waste burning process per cycle shall be fully automatic from start to finish. The waste

incinerator unit shall consist of a primary chamber, secondary chamber, stack, combustion air blower, burners and

controls as the main components.

medical waste monitoring


Medical waste is positioning an expanding problem all over the globe, threatening the wellness of team, clients, disposal employees and also any individual else coming right into call with the commonly harmful products disposed of by medical facilities and also other healthcare sites. Healthcare facility waste varies from website to website and also the greatest obstacle is to dispose of this wide range of waste streams. Destroying dangerous waste at source is by much the most reliable as well as effective means of managing waste that could possibly spread out conditions or viruses.

incinerators industrialHealth Clinics and Health center can now handle their own waste streams using one of our specialist medical incinerators. Destroying hazardous waste at source is by far the most effective and efficient way of handling waste that could potentially spread diseases or viruses.


Incinérateur maximisant l'efficacité de la combustion

Plus de fumée et d’autres polluants sont libérés dans l’air pendant les phases de démarrage et de refroidissement du cycle de combustion

que pendant la «phase de combustion complète» lorsque des températures élevées sont maintenues. Les feux couvants à basse température devraient être

évité. Ne brûlez que des matières premières sèches et ajoutez périodiquement des déchets supplémentaires au feu afin de maintenir une combustion élevée

températures jusqu’à ce que tous les déchets aient été détruits. Si les déchets doivent être brûlés à ciel ouvert sur le sol, l’utilisation de

Les «fosses» doivent être évitées car cela empêchera le mélange turbulent nécessaire de l’oxygène avec les gaz combustibles.

La température de fonctionnement souhaitée doit être atteinte aussi rapidement que possible lors de l’utilisation de tout appareil de combustion ou d’incinération. UNE

Un “ démarrage ” rapide peut être obtenu en chargeant d’abord de manière lâche du papier sec, du carton d’emballage et du bois non traité dans le fond

de l’appareil. Un matériau sec et faiblement chargé s’enflamme plus rapidement et brûle plus uniformément qu’une charge humide et bien tassée.

Les déchets humides ne doivent être ajoutés qu’après que le feu brûle activement. Un remplissage excessif de la chambre de combustion empêchera les turbulences

mélange de gaz combustibles et d’oxygène, et doit être évité.

Les incinérateurs modernes à alimentation discontinue sont conçus avec des brûleurs primaires et auxiliaires pour atteindre et maintenir le niveau élevé nécessaire

brûler les températures. Des déchets supplémentaires ne doivent être ajoutés à ces incinérateurs qu’une fois la phase de “ refroidissement ”

terminé et vous pouvez le faire en toute sécurité.

Линия по производству масок для лица N95 поступила в продажу! 250,000 долларов США за комплект

Линия по производству масок для лица N95 поступила в продажу! 250,000 долларов США за комплект

Линия по производству масок для лица N95 поступила в продажу! 250,000 долларов США за комплект

л Размер (L * W * H): 1 037 * 855 * 1780

L P Ауэр поставок 15.3kw однофазного

L N и др Вес: прибл .: 1500 кг

HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-04-10

ห่อด้วยผ้าฝ้ายกรองพิเศษ

2019-05-13 อุปกรณ์ฟอกอากาศ 325 views

ผ้าฝ้ายกรองพิเศษชนิดม้วน Ec olead

คุณสมบัติของสินค้า:

l    มันทำจากเส้นใยสังเคราะห์อินทรีย์หรือใยแก้วโดยการบีบอัดและม้วน และพื้นผิวช่องระบายอากาศของวัสดุกรองนั้นติดด้วยตาข่ายทอที่มีความแข็งแรงสูงเพื่อป้องกันไม่ให้วัสดุกรองม้วนงอและเสียรูปเมื่อความเร็วลมสูงเกินไป

l    โครงสร้างเส้นใยยืดหยุ่นสูงจะไม่บีบอัดวัสดุกรองเข้าด้วยกัน และส่งผลต่อการใช้งานเนื่องจากมีความต้านทานลมมาก

l    ผ้าฝ้ายกรองถูกพ่นด้วยสารยึดติดพิเศษเพื่อเพิ่มความสามารถในการดักจับฝุ่น

l    ความจุเก็บฝุ่นสูง ไม่ต้องเปลี่ยนบ่อย ลดต้นทุนการใช้งาน use

l    ด้วยรีลภายใน สะดวกในการเปลี่ยนวัสดุกรอง ซึ่งเข้ากันได้ดีกับตัวกรองม้วนของ Ecolead และตัวกรองม้วนของผู้ผลิตรายอื่น

รูปแบบปกติ:

วัสดุ

ใยสังเคราะห์

ใยสังเคราะห์

ไฟเบอร์กลาส

แนวต้านเริ่มต้น

35Pa

50Pa

20Pa

ประสิทธิภาพน้ำหนัก

85%

90%

90%

ความเร็วลม

2.5 เมตร/วินาที

1.0m/วินาที

1.5 เมตร/วินาที/

ปริมาณลม

900 ลบ.ม./ชม

900 ม. 3 /ชม

3900 ม. 3 /ชม

อุณหภูมิสูงสุด

120

120

150

ความหนา

10mm/13mm

20mm

25mm/50mm

พารามิเตอร์ประสิทธิภาพ:

น้ำหนัก

260ตรม/กรัม

ประสิทธิภาพน้ำหนักเฉลี่ย

85-90%

แนวต้านเริ่มต้น

80Pa 30% ) @2.5~10m/s

แนวต้านสุดท้ายที่แนะนำ

200-250Pa

ความจุฝุ่น

350g/m2

ทนต่ออุณหภูมิ

~80 o C

ทนต่อความชื้น

100%

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

Waste Incinerator

Product Description

Waste Incinerator International Market Analytics  Date.

Keyword:  Little incinerators  Medical waste incinerator  Pet animal cremation incinerator  Incinerator makers

Incinerator is a incineration equipment, direct fire waste by gasoline fuel or oi fuel. As distinct circumscription, incinerator may be termed many words as under: 

Therapy capacity: Small scale incinerator, big scale incinerator and incineration pant.  Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators  Incinerator fuel: Gas incinerator, oil incinerator  Waste to Energy (WTE): WTE incinerator, non-WTE incinerator  Incinerator Manufacturer: China incinerator maker, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer.  Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India)  Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour 

Pyrolytic incineration technical is conventional waste treatment solution for many decades. All around the world, in many countries, people anti incinerator because the incinerator will produce a large Dioxin from the smoke. Smart ash cost, smartash incinerator cost, smokeless crematorium, sterilization by incineration, supplier waste incineration china, syc 30 inciner, syc hospital, Dioxins can be released into the environment through forest firesand backyard burning of garbage, certain industrial activities, and residue from past commercial burning of waste. Dioxins break down very slowly and past releases of dioxins from both natural and man-made sources still exist from the surroundings. Anyhow, we have to remind that, this is big scale incineration pant, generally greater than 30 ton per day. This is a social issue, to examine and propose ways in different angles in the general public, government, economic development, environmental protection, technology advancement, etc. 

So, why we use incinerator?  First, for the medical waste in the hospital, the pyrolytic incinerators is best treatment up to now. Pyrolytic technology can kill the virus, pollution management.  Second, for human body, pet creature, in many countries and regions, we desire to cremation them. This is the ceremony in the process of society development, and ceremonies to commemorate the disappearance of life. 

As above two rationale although not just above, we nevertheless utilize incinerators. 

How you can find reasonable incinerator to your local site?  Incinerator is not a inexpensive equipment, generally the small scale version ‘s cost around $5, 000USD per unit and big scale version ‘s cost more than $50, 000USD each unit. Thus, before purchase one unit incinerator, you have to make clear following items: A, burn out what? Incinerator is a incineration equipment, function is flame waste. So what sort of waste that you would like to cure?  B, small or big? This according to the waste output every day or the waste quantity per feed time, like creature size.  C, fuel? Incinerator use oil or gas fuel, generally, gas fuel is less expensive than oil and the smoke cleaner than oil gas version. But some neighborhood site don’t have gasoline distribution system.  Along with other tech items, like power(220V, 380V), waste feed door type, incinerator structure, etc. 

Once you clarify these, it is possible to go to find a local or global manufacturers, asking prices, technical specifications and finally purchasing the ideal products. 

Items/Model YD-30 YD-50 YD-100 YD-150 Items/Model YD-200 YD-300 YD-500 YD-600 Items/Model YD-200 YD-300 YD-500 YD-600
Burning Rate (kgs/Hour) 30 kgs/Hr. 50 kgs/Hr. 100 kgs/Hr. 150 kgs/Hr. Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr. Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr.
Feed Capacity (kgs) 60 kgs 150 kgs 200 kgs 300 kgs Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs
Equipment Weight 2300 kgs 4000 kgs 4300 kgs 7000 kgs Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 360 900 1200 1500 Primary Chamber (Liters) 2000 2400 4000 5500 Primary Chamber (Liters) 2000 2400 4000 5500
Secondary Chamber (Liters) 200 200 500 500 Secondary Chamber (Liters) 500 1200 1500 1500 Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 145x90x175 200x160x230 220x180x360 240x170x380 External Dimensions (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475 External Dimensions (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 100x60x60 120x90x85 130x100x90 150x100x96 Internal Dimensions (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125 Internal Dimensions (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 200 300 300 500 Oil Tank(Liters) 300 500 500 500 Oil Tank(Liters) 300 500 500 500
Door Opening (cm) 48 x 60 62 x 80 55 x 80 59 x 81 Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128 Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 5 5 10 10 Chimney (M) 10 10 14 14 Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES Secondary Chamber  YES YES YES YES Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES Mix-Combustion Chamber YES YES YES YES Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES Smoke Filter Chamber YES YES YES YES Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES Temperature Monitoring YES YES YES

Wrote by Nicky

Normes environnementales relatives aux émissions atmosphériques CA

Les normes sur les émissions atmosphériques établissent des limites sur la quantité de contaminants pouvant être rejetée dans l’atmosphère. Ces normes sont exprimées en concentration dans les gaz d’échappement sortant de la cheminée et peuvent être atteintes en utilisant la technologie d’incinération généralement disponible et les pratiques de réacheminement des déchets. Les normes d’émissions suivantes1 s’appliquent aux incinérateurs de déchets solides existants, nouveaux ou en expansion opérant au Nunavut et ont été adoptées à partir des normes pancanadiennes du Conseil canadien des ministres de l’environnement (CCME) pour les émissions de dioxines, de furannes et de mercure, respectivement. Des normes similaires pour le brûlage à l’air libre des déchets solides n’ont pas été établies.

Tableau 1. Normes d’émission dans l’air pour les incinérateurs de déchets solides

Paramètre Numérique Standard Explication

Dioxines et furanes
80 pg I-TEQ / mètre cube
L’unité de mesure est le picogramme de la toxicité internationale
Équivalents par mètre cube d’air

Mercure
20 µg / Rcubic mètre
L’unité de mesure est le microgramme par mètre cube de référence (le volume de gaz ajusté à 25 ° C et 101,3 kilopascals)

L’opacité est le degré auquel les gaz d’échappement réduisent la transmission de la lumière et obscurcissent la vue de tout objet en arrière-plan. Il est exprimé en pourcentage représentant la mesure dans laquelle un objet vu à travers les gaz est obscurci. Bien qu’il ne s’agisse pas d’une norme d’émission, l’opacité fournit une indication des performances générales de l’incinérateur en fonctionnement normal2. L’opacité dans la cheminée de l’incinérateur ne doit pas dépasser 5%. Bien qu’il ne soit pas prévu que les niveaux d’opacité dépassent 1% à 2% en fonctionnement normal, des valeurs supérieures à 5% indiquent que l’incinérateur ne fonctionne pas correctement et qu’une évaluation et un ajustement supplémentaires des performances sont nécessaires.

Figure 6 – Exemples de cotes d’opacité de la fumée
Les cotes d’opacité sont des estimations et sont fournies à titre indicatif uniquement
Photos au centre et à droite gracieuseté du ministère de l’Environnement et des Ressources naturelles du GTNO

The number of transmittable medical waste?


Polaris Power saving Information: With the considerable usage the health care market and also the
development of scientific non reusable products, scientific waste generation is proliferating.
The latest information reveal that there were 261, in the city to the community solid waste
air pollution avoidance details, simply these 261 cities this year, clinical waste quantity
gotten to 547,500 great deals.

An additional one statistics expose that at the end of 2012, the complete range of medical
facilities of 950 297 beds 5.7248 million, according to an average of 1 kg per bed
medical waste everyday, the overall amount of medical waste created in the country each
year to reach 200 million whole lots.

Faced with such a substantial amount of waste created, however numerous cities are comprised of one or a.
small number of waste disposal in a singular means of taking care of professional waste incineration. When.
an instance of waste incineration plants folded, the federal government as well as likewise the medical center in the.
monitoring of professional waste as well as additionally day-to-day treatments, will certainly manage significant troubles.

As a matter of fact, university hospital waste produced a large component of metropolitan solid waste as well as similar reduced-.
risk waste, regarding 75% to 90%, the continuing to be 10% to 25% are thought of damaging, it could pose.
a health threat, hospitals communicable waste is usually not more than 10% of the total.
waste. Decrease the quantity of waste created must work group monitoring as the.
residential or commercial property, today waste classification level of the healthcare center, stressing.

Medical waste collection is necessary to the implementation of ecologically audio administration.
of medical wastes, however numerous Chinese health centers do not pay attention to the kind handling.
clinical waste, in addition to open location, no noticeable indications, category degree is low.

General clinical facility with typical household trash containers as well as additionally yellow clinical, health care facility as well as.
personnel educated Message logo design, the swab and additionally numerous other body fluids enter telephone call with the person.
garbage into yellow garbage bag. The press reporter saw some university hospital situated that blood.
Examinations and also outpatient professional area yellow trash can of medical waste both locations.
Paper, food product packaging as well as other standard home waste.

A survey accomplished in a healthcare facility in Wuhu, Anhui Province reveals that at some clinical.
employees category suggestion is obscure, non-infectious waste, such as clinical materials.
item packaging, one-of-a-kind clinical waste integrated with yellow bag. Such a method did not.
trigger injury to the spread of condition, however it enhances the expense of processing clinical waste.

Survey on the standing of monitoring and disposal of medical waste in a primary medical care facility.
disclosed that the passing price of trash transferred only 45%. The study also clarified.
that a lot of medical waste in the lack of sterilization, supplied to the transfer.
terminal handling, which may produce second contamination garbage take place during transportation.

Great deals of neighborhood clinical garbage disposal charge is determined according to bed, the quantity of waste.
produced by healthcare facilities not right related to the handling fee paid. , if the hospital.
.
boost the management level, decreasing the quantity of waste created, as well as the identical number.
of beds, rubbish prices will absolutely not be lowered, to make sure that is not conducive to encouraging.
clinical centers resource waste splitting up along with decline.

Medical waste are made complex, including infectious wastes, pathological wastes, chemical.
wastes as well as likewise damaging waste, and so on, connecting to various fabric products, plastics, glass,.
steel in addition to human companies, a solitary treatment is challenging to achieve for a selection of.
clinical garbage risk-free therapy.

For numerous type of clinical waste, we have a different handling method and also gadget.
have actually been produced in addition to used throughout the globe. In order to decrease worldwide pollution of.
furans and dioxins, the Stockholm Convention on Persistent Organic Pollutants and also the World.
Health and wellness Company advises using various other alternate kinds melted. Autoclaving is.
potentially the most thoroughly used non-burning disinfection, along with chemical handling.
development, refining modern innovation as well as microwave plasma taking care of modern-day technology.

China is currently typically used is incineration, this technique has a tendency to create substantial quantities of.
damaging gas mix, including hydrochloric acid, dioxins and furans, together with damaging.
metals lead, cadmium along with mercury.

An extra total professional waste incineration system will contain the feed system,.
burner, burning air system, start the ignition as well as burn-assisted system, flue gas.
filtering system, as well as additionally the deposit managing system, automatic monitoring system and also.
emergency system, which flue gas cleansing system is utilized to cut dioxin, mercury as well as various other.
really dangerous compounds by incineration. Nonetheless, research study discloses that some old gadgets.
clinical burners, waste is a straight smoke exhaust discharges.

South China Institute of Environmental Sciences as soon as a scientific waste incineration plant in.
Guangdong Province as the research study things, via the collection in addition to evaluation incineration.
plant as well as additionally the surrounding dust and additionally plant samples, PAHs comprehend incineration plant (PAHs).
distribution, resources and also contamination levels. The outcomes show that medical incinerators soil.
surrounding a certain level of contamination of PAHs recognized in the dirt 16 polycyclic.
fragrant hydrocarbons, PAHs complete quantity ranging 11.83 ng/ g ~ 788.24 ng/ g, indicate 236.681 ng.
/ g; in the research study area downwind of the prevailing winds in the dirt, complete PAHs were.
substantially greater than the prevailing winds dirt web content, as well as likewise the total emphasis of.
PAHs in dirt raises with array disclosed a progressive reduction. medical incinerator


производитель инсинераторов в Китае

1. Время пребывания больше 2 секунд?
2. Предварительно ли подогрет первичный и вторичный воздух?
3. Может ли это быть непрерывной системой?
4. Есть ли система контроля рабочих параметров? (температура)
5. Есть ли система регистрации данных?
6. Предусматривает ли он меры контроля для регулирования подачи отходов, скорости решетки, температуры, объема и распределения?

первичного и вторичного воздуха?
7. Есть ли в нем дополнительные горелки?
8. Есть ли в нем система, которая автоматически останавливает подачу отходов, когда параметры сжигания не подходят?
9. Возможна ли установка автоматической системы выгрузки золы?
1. Подогревается ли первичный и вторичный воздух?
2. Может ли это быть непрерывной системой?
3. Есть ли система регистрации данных?
4. Предусматривает ли это контрольное вмешательство для регулировки подачи отходов, скорости решетки, температуры, объема и распределения?

первичного и вторичного воздуха?
5. Есть ли дополнительные горелки?
6. Есть ли в нем система, которая автоматически прекращает подачу отходов, когда параметры сжигания не подходят?
7. Возможна ли установка автоматической системы выгрузки золы?
Мусоросжигатель
Номинальная мощность: 100 кг / час
Тип дизайна: двухкамерный
Режим нагрева: нагревательные элементы