Archive: August 31, 2023

animal cremation equipment prices

The following requirements are to be considered as an integral part of the technical specifications for each equipment

type.

The system offered shall be designed to operate normally under the conditions of different regions in Kenya. These

conditions may include but not limited to power supply, temperature, humidity, and other climatic conditions.

A warranty for a minimum of 12 months must be supplied.

All text, parameters etc. on all control operating interfaces as well as on information displays and on print-outs

shall be written in English. The Bidder is responsible for all permits and approvals for importation. The Bidder shall

provide all the necessary documentation in order to facilitate the legal requirements for the installation and proper

operation of the equipment.

Period of Execution is 180 days from contract date covering delivery to the site and completion of all verification

operations required for the issuance of provisional acceptance.

Representatives of PATH and the Ministry of Medical Services (MOMS), together with the Bidder or Bidder’s

representative, shall carry out the controls, testing and initial approval for provisional and final acceptance. The

provisional and final acceptance shall take place at the final destination(s).

After-Sales Service: The Bidder is required to ensure that a maintenance, service and repair centre, which is

authorized by the Manufacturer, and which is able to rapidly supply genuine spare parts and consumables recommended by

the Manufacturer is available throughout the warranty period. In fulfillment of this requirement with their offer,

Bidders must submit a statement signed by the Manufacturer or an approved

representative of the Manufacturer:

oproviding the name and address of its authorized maintenance, service and repair centre,

oConfirming that this authorized maintenance, service and repair centre is able to rapidly supply genuine spare parts

and the consumables recommended by the Manufacturer.

The delivery and installation time must be agreed between Bidder, target Hospital and PATH. The treatment plant must

arrive pre-assembled. The Bidder shall ensure that all parts of the plant transported by sea shall not be shipped as “

deck cargo.”

medical incinerator design

It is expected that the Bidder will cooperate closely with PATH and target Hospitals for the new waste handling

building/area and will make available all needed technical information, drawings, etc.,

The following waste streams shall be treated in the new HCW treatment center(s):

Infectious waste

Sharps waste

Pathological waste

Pharmaceutical waste including cytotoxic or genotoxic waste

Small amounts of chemical waste

TECHNICAL SPECIFICATION FOR PROCUREMENT OF “MEDICAL WASTE TREATMENT PLANT”

Lot-A

Specification

1.Hydroclave for Medical waste Treatment Plant: Quantity: 02 Nos.

General Requirements

The processor must be approved to sterilize  & treat the following types of medical waste:

-Liquids: Blood, body fluids etc.

-Blood bags & tubing, gloves, Gowns, drapes, etc.

-Contaminated packaging: bandage etc.

-Sharps & Sharp containers

-Disposable instruments

-Glass products

-Human and animal tissue (surgical and pathologic) –Based upon MWM regulations

-Cultures, stocks and glassware

The processor must comply with a documented efficacy level of 6log10 reduction in spore survival (99,9999%) of the

Bacillus Stearothermophilus

The processor should reduce the volume of the waste by 60% to 80% through complete dehydration and sterilization of

the waste

The  processor must have ZERO harmful emission level and meet or exceed all standards required by the EU.

The whole waste treatment system should be offered as a complete unit consisting of following equipment and

ancillaries-

(A)The sterilization processing unit

(B)Steam Boiler

(C)Tub washer

(D)Heavy duty external shredder-

(E)Conveyer belt-based on Manufacturer’s Recommendations

(F)Bin Lift/Tipper

(G)Spore tester

(A)Features and Specifications of the Sterilization Processor unit:

Technical specification of the processor:

Steam autoclave in combination with a heavy duty Fragmenting System inside the vessel/chamber

The vessel must be of Double Chamber

Capacity (kg/load) : minimum 200 kg/batch/cycle

Volume of 140-190 liters of bulk per cycle

Average Cycle time : 60 minutes

Operating temperature: 121◦C to 135◦C

Operating pressure : 1.1 Bar to 2.4 Bar