Archive: July 26, 2023

русский

00 КРОВАТИ МЕДИЦИНСКИЙ ЦЕНТР ИНЦЕНЕРАТОР ТЕХНИЧЕСКАЯ ИНФОРМАЦИЯ

Jul 26, 2023 by hiclover 0 Comments #русский

1) Политика

– – – – Инсинератор:

Он разработан для дезинфекции медицинских отходов, уменьшения их количества и обеспечения неузнаваемости деталей в одной полностью закрытой, а также автоматизированной системе.

2) План утилизации отходов

  1. а) Классификация

Загрязненные отходы загружаются прямо в ведущую камеру из нержавеющей стали, где прочный измельчитель измельчает отходы на мелкие предметы.

Отходы инфекций Специально контролируемые отходы Орган, игла и т. Д.
Промышленные отходы Резиновые перчатки и др.
Общие отходы Марля и др.
Общие отходы Пластик, Резина Бутылка для инфузии и т. Д.
Бумага, дерево, винил Ваучер и др.
Металл, Стекло Банка, Стеклянная бутылка
  1. б) Удаление инфекционных отходов

Цикл лечения:

1- Заправка; загрязненные отходы автоматически загружаются прямо в камеру системы

2-измельчение; эластичный измельчитель уменьшал продукт прямо на мелкие детали, а также включает уникальную трансформируемую систему, позволяющую избежать препятствий

3-тепло; насыщенный мощный пар под давлением повышает температуру до 134 C, а также давление до 3 бар

4-стерилизация; санитария осуществляется прямым телефонным разговором с измельченным материалом (134 c, 3 бара) в течение 20 минут

5-Охлаждение; температура снижается до 80 C за счет разбрызгивания удивительной воды на двойной слой резервуара для обработки, при этом установка возвращается к атмосферному давлению.

6-Слив; сильный пар сжимается до воды и вместе с охлаждающей водой попадает в гигиеническую канализационную систему.

7-вакуумный; оставшийся повторяющийся пар удаляется воздушным насосом

8-разгрузка; электронный сигнал информирует водителя о том, что все проблемы безопасной эксплуатации устранены

Проблема разблокирует гаджет, а также позволяет самотеком выгрузить обработанные отходы прямо в контейнер.

Спецификация тренера

Общие характеристики

8log 10

– – – – Инсинератор:

Он создан для стерилизации профессиональных отходов, уменьшения их количества, а также для того, чтобы их компоненты были неразличимы в одной полностью закрытой, а также автоматизированной системе.

Зараженные отходы засыпаются прямо в верхнюю камеру из нержавеющей стали, где прочный измельчитель измельчает отходы на крошечные продукты.

Цикл терапии:

1- Заправка; загрязненные отходы немедленно загружаются в камеру системы

2-измельчение; Долговечный измельчитель уменьшал предмет на мелкие кусочки и, кроме того, состоит из уникальной системы трансформации, позволяющей избежать препятствий.

3-тепло; насыщенный сжатый тяжелый пар увеличивает температуру до 134 C и напряжение до 3 бар

4-стерилизация; стерилизация проходит напрямую с измельчающим материалом (134 c, 3 бара) в течение 20 минут

Рабочая темп. Максимум 160 С
Максимальный вес при заполнении отходами Для специального гидравлического испытания. Кг 10500
Стресс. Кг / см 3 3.5
Давление пара. Бар 8
Максимальный расход пара кг / ч 500
Бар сжатого воздуха 6
Электричество 380 В / 3-фазная система защиты от перенапряжения 35кВт
Рабочие характеристики
Среднее время цикла. минут 60
Производительность по ширине. Кг 500–600
Плотность. Кг / м3 100
Средняя производительность процесса, кг / цикл микробной инактивации 200–300

5-Охлаждение; уровень температуры снижается до 80 C путем распыления устрашающей воды на двойной слой терапевтического сосуда, при этом устройство возвращается к атмосферному давлению.
Редуктин объема отходов 80%
Потребление / цикл
Готовить на пару. Кг 40
Электричество . КВт / ч 9
Литров воды 500
waste

portable medical waste incinerator manufacture companies in china

Jul 26, 2023 by hiclover 0 Comments #Blog

Capacity: 20KG/Hr, Temp Range: 600 Deg. C – 1100 Deg. C

Fuel Supply: Natural Gas/Diesel

Dual Combustion Chamber Complete Scrubbing System (Dual

Resultant Gas Washer), Dual Blower, Chimney Height: 8m

Electric Supply: 220/240Volt, Single Phase

1.    Type of waste: Trash
2.    Any other type:
3.    Quantity of waste generated per day in kg: (50 Ton per day) SOW
4.    Duration – incinerator will be used per day: (Minimum 12 hours) SOW
5.    Approximate moisture content:
6.    Local incinerator operating and emission standards: US-EPA
7.    What is the height of the chimney required: Not known
8.    Fuel proposed to be used: Deiseal Oil
9.    Availability of power and type: 220 or 110
10.    Details of space available: Plenty of space
11.    Do you require an automatic loading system: [**] Yes  [**] No
12.    Do you require a gas scrubbing system: [**] Yes  [ ] No
13.    How soon do you require the system to be delivered: 30
14.    Any other specific requirements:
15.    Nature: (Solid/Semi-solid/Liquid)

waste

Incinérateur YD-100 pour l'Irak

Jul 25, 2023 by hiclover 0 Comments #Français

Il y a 03 ensembles de modèles YD-100 livrés en Irak entre 2013 et 2014. L’incinérateur est utilisé pour plusieurs chantiers de construction et tous les types de carburant sont du diesel.

 

Articles / modèle YD-100
Taux de combustion (kg / heure) 100 kg / heure
Capacité d’alimentation (kg) 200 kilogrammes
Poids de l’équipement 5300 kilogrammes
Chambre primaire (litres) 1200
Chambre secondaire (litres) 500
Dimensions extérieures (cm) 220 x 180 x 360
Dimensions internes (cm) 130 x 100 x 90
Réservoir d’huile (litres) 300
Ouverture de porte (cm) 55 x 80
Cheminée (M) dix
Type de cheminée Acier inoxydable
Chambre secondaire OUI
Chambre de mélange-combustion OUI
Chambre de filtre à fumée OUI
Combustible de combustion Gaz de pétrole
Temps de résidence 2,0 sec.
Surveillance de la température OUI
1er. Température Chmaber 800 ℃ –1000 ℃
2ème. Température Chmaber 1000 ℃ -1200 ℃
Environnement médical  
Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.
waste

ENVIRONMENTAL PROTECTION ACT

Jul 25, 2023 by hiclover 0 Comments #English

The following are excerpts from the Environmental Protection Act

1.    

prescribe that, where discharged into the environment, (a)    endangers the health, safety or welfare of men, (b)    interferes or is likely to interfere with normal enjoyment of life or property, (c)    endangers the health of animal life, or (d)    causes or is likely to cause damage to plant life or to property;

“Discharge” contains, but not in order to restrict the meaning, any pumping, pouring, throwing, dumping, emitting, burning,

spraying, spreading, leaking, spilling, or escaping;

“Environment” signifies the components of the Earth and includes (a)    air, land and water, (b)    all layers of the atmosphere, (c)    all organic and inorganic matter and living organisms, and (d)    the interacting natural systems that include components referred to in paragraphs (a) to (c).

“Inspector” means an individual appointed under subsection 3(2) and comprises the Chief Environmental Protection Officer.

2.2    The Minister may (a)    establish, operate and maintain stations to monitor the quality of the environment in the Territories; (b)    conduct research studies, conferences and training programs relating to contaminants and also to the preservation, protection or improvement of their environment; (c)    grow, co-ordinate and manage policies, criteria, guidelines and codes of practice relating to the

preservation, protection or improvement of their environment; (d)    collect, distribute and publish information concerning contaminants and to the preservation, security or

improvement of their environment:

3.     (1) The Minister shall appoint a Chief Environmental Protection Officer who will administer and enforce this Act and

the regulations.

(2)    The Chief Environmental Protection Officer may appoint inspectors and will specify in the consultation the powers

that may be exercised and the duties that could be carried out by the inspector under this Act and regulations.

5.     (1) Subject to subsection (3), no person shall release or allow the discharge of a contaminant into the

atmosphere.

(3)    Subsection (1) does not apply where the person who discharged the contaminant or allowed the release of this

contaminant determines that (a)    the discharge is authorized by this Act or the regulations or by an order issued under this Act or the regulations; (b)    that the contaminant was used solely for domestic purposes and has been discharged from within a dwelling house; (c)    that the contaminant was discharged from the exhaust system of a car;

(d)    the release of the contaminant resulted from the burning of leaves, foliage, wood, plants or stubble for domestic or

agricultural purposes; (e)    the release of the contaminant resulted from burning for land clearing or land grading; (f)    the release of the contaminant resulted from a fire set by a public official for habitat direction of silviculture

purposes; (g)    that the contaminant was discharged for the purposes of combating a forest fire; (h)    that the contaminant is a soil particle or grit discharged in the course of agriculture or horticulture; or (I)    that the contaminant is a pesticide classified and classified as “domestic” under the Pest Control Products Regulations

(Canada).

(4)    The exceptions set out in subsection (3) do not apply where a person discharges a contaminant that the inspector has

rational grounds to believe is not usually associated with a discharge from the excepted action.

5.1.     Where a discharge of a contaminant into the environment in contravention of this Act or the  regulations or the

provisions of a permit or permit issued under this Act or the law occurs or a reasonable probability of such a

discharge exists, every person causing or contributing to the discharge or raising the chance of such a discharge, and

the proprietor or the person in charge, management or control of the contaminant prior to its release or likely discharge, will

immediately: (a)    subject to some regulations, report that the release or likely discharge into the person or office designated by the

regulations; (b)    take all reasonable measures consistent with public safety to stop the discharge, fix any damage resulting from the discharge and prevent or eliminate any threat to life, health, property or the environment that results or may

be reasonably expected to result from the discharge or likely discharge; and (c)    make a reasonable effort to inform every member of the public who may be negatively affected by the discharge or

likely release. (1)  Where an inspector believes on reasonable grounds that a discharge of a contaminant in contravention of this Act

or the regulations or a provision of a permit or permit issued under this Act or the regulations has occurred or will be

happening, the inspector may issue an order requiring any person causing or contributing to the discharge or the proprietor or the

person in charge, management or control of the contaminant to stop the discharge by the date named in this purchase.

7.     (1)  Notwithstanding section 6, in which a person discharges or permits the release of a contaminant into the

environment, an inspector may order that person to repair or remedy any harm or damage to the environment that results from

the release.

(2) Where a person fails or neglects to repair or remedy any harm or damage to the environment in accordance with an order

made under subsection (1) or in which immediate remedial steps are required to defend the environment, the Chief

Environmental Protection Officer may cause to be completed the steps that he or she considers necessary to fix or

remedy an injury or damage to the environment that results from any discharge.

APPENDIX 2 — MODIFIED BURN BARREL DESIGN AND SPECIFICATIONS

A altered burn barrel is typically constructed from a 45 gallon metallic gas or petroleum drum. The modifications lead to greater

heat creation and retention, better mixing of the waste with incoming air and more holding period inside the barrel.

Together, these alterations lead to more complete combustion of the waste than does start burning on the floor or

in a pit.

waste

tiny range burner

Jul 25, 2023 by hiclover 0 Comments #Blog


It must have the capacity to run not less than 10 hours/day

This burner must be able to wreck all flammable wastes produced by medical centers, personal facilities, study laboratories, institutes, and also so on. 400 and its elevation: 8 m

The Quantity of the burning chamber a minimum of: 1.200 L

The Measurement of the door for filling up in centimeters a minimum of: 70 × 70.: diesel

Manufacturer to provide essential information for the extremely best of the installment

The control board will have all appropriate audible and visual alarm systems to make sure safe operation.
A burning chamber of waste: oPerfectly limited door for the hands-on loading of waste. The loading should be Guidebook, Establish Lots oA heater of lights which the usage is limited to the ignition of waste. oFrontage of packing with door seals increased on joints, wheel of screw plug, flexible joint, as well as packing safeguarding out of refractory. oThe insulation of the burning chamber require to be composed of refractory blocks, having a high internet content of aluminium in addition to insulates bricks in order to ensure a minimum temperature outside sheet metal. o Framework of the refractory;

? Refractory concrete:. Density: ≥ 100 mm. Nature: 42 %of Al203? Shield in fibrous panels: Thickness: ≥ 75 mm Nature: Calcium silicate.? Burner of illumination of waste, with gas, traditional mono-bloc dispersing routing plunging fire, lighting and likewise safety as well as security of electronic ignition, irreversible ventilation,
electromagnetic sluice gateway of guideline and also isolating valve.
Plate of burning in Carborundum, protecting against the repairing of glass along with slags

A chamber of article burning of gases oA heating system of burning of gases, oA gizmo of injection of air permitting a complete recombustion of gases, oA tool of air inlet of a/c of waste gases, oA sheath of discharge of the gases charred. oCarcass in solid
Refractory concrete:? Nature: 65% of Al203? Nature: Calcium oBurner with gas, mono-bloc spreading guiding kind with straight fire, illumination as well as safety and safety of digital ignition, lasting ventilation, electro-magnetic sluice entry of guideline and additionally dividing shutoff.
oA 2nd shot of air to ensure superb oxygen material.

A control box ensuring the total cycle of burning.

Fan: oElectro-ventilator dispersing the 2nd air, the guideline of the air blood circulation being executed by shutoffs as well as additionally adhering to the control of the automatic cycle. Controls and also guidelines: Control box watertight to dust, containing:

A button circuit breaker for every engine (ventilators along with heaters). A timer with flexible temporization for the standard of each burner. A regulatory authority with look for the temperature degree of burning. A regulatory authority with watch for the temperature of message burning. Electric box

The additional
shedding chamber must damage the pollutant item and should resist to high temperature( 1100 ° C)

Refine Filtering system: Scruber to be mentionned as optional

It ought to have the capacity to run not much less than 10 hours/day

This incinerator should be able to destroy all combustible wastes created by medical facilities, personal centers, research study labs, institutes, and so on.

Design Spec: Kinds A, B, C, D, and also E of scientific waste

“PYROLYTIC” burning, by regulating the gasification of waste. 400 and also its elevation: 8 m

The Quantity of the combustion chamber a minimum of: 1.200 L

The Measurement of the door for filling up in centimeters a minimum of: 70 × 70.: diesel

Supplier to provide essential details for the extremely ideal of the installation

The control board shall have all ideal distinct as well as aesthetic alarm systems to make certain secure procedure.

This burner with” PYROLYTIC “shedding requirement to have: 1.

Burner procedure ought to be Automatic On/Off Fuel?: diesel

Manufacturer to give necessary details for the very best of the installment

The control board shall have all suitable audible and aesthetic alarms to make sure safe operation.

This burner with” PYROLYTIC “burning need to have: 1.
A burning chamber of waste: oPerfectly tight door for the hands-on loading of waste. The loading should be Manual, Set Load oA heater of lighting which the use is restricted to the ignition of waste. oFrontage of loading with door seals increased on joints, wheel of screw plug, flexible joint, as well as stuffing protecting out of refractory. oThe insulation of the burning chamber need to be composed of refractory bricks, having a high web content of aluminium as well as insulates bricks in order to ensure a minimum temperature outside sheet metal. o Structure of the refractory;

? Refractory concrete:. Density: ≥ 100 mm. Nature: 42 %of Al203? Insulate in fibrous panels: Thickness: ≥ 75 mm Nature: Calcium silicate.? Burner of illumination of waste, with fuel, conventional mono-bloc spreading directing plunging fire, illumination and also safety and security of digital ignition, irreversible ventilation,
electromagnetic sluice gate of regulation and isolating valve.
Plate of combustion in Carborundum, preventing the fixing of glass as well as slags

A chamber of post burning of gases oA heater of burning of gases, oA gadget of injection of air allowing a complete recombustion of gases, oA tool of air inlet of air conditioning of waste gases, oA sheath of discharge of the gases charred. oCarcass in solid
sheet steel with assistance of connection. oComposition of the refractory;? Refractory concrete:? Thickness: ≥ 150 mm? Nature: 65% of Al203? Insulate in fibrous panel:? Density: ≥ 85 mm? Nature: Calcium oBurner with gas, mono-bloc spreading directing kind with straight flame, illumination as well as safety and security of digital ignition, long-term ventilation, electromagnetic sluice entrance of regulation and also separating shutoff.
oA second shot of air to guarantee excellent oxygen material.

A control box guaranteeing the complete cycle of combustion.

Follower: oElectro-ventilator dispersing the second air, the regulation of the air circulation being carried out by valves and also adhering to the control of the automated cycle. Controls and also guidelines: Control box watertight to dust, consisting of:

A button circuit breaker for every engine (ventilators as well as burners). A timer with flexible temporization for the guideline of each burner. A regulator with watch for the temperature level of burning. A regulatory authority with digital watching for the temperature of message burning. Electric box

The secondary
burning chamber should damage the pollutant item and must resist to high temperature( 1100 ° C)

Refine Filtering system: Scruber to be mentionned as optional


waste

Samsung Electronics Air Shower BFU กรอบการติดตั้งตัวกรองอากาศที่มีประสิทธิภาพสูง

Jul 25, 2023 by hiclover 0 Comments #Thai

2019-05-20 ผลลัพธ์และ กรณีรับชม358 ครั้ง

Xian Samsung Electronics

โครงติดตั้งแผ่นกรองอากาศประสิทธิภาพสูง BFU ในห้องอาบน้ำ

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

waste

Incinérateur YD-30 pour l'Australie

Jul 25, 2023 by hiclover 0 Comments #Français

Incinérateur modèle YD-30 pour l’ Australie, client de Melbourne. De 2011 à 2013, nous livrons 02 modèles différents pour ce client, l’un est le modèle SYC-50 (maintenant mis à jour vers le modèle TS50 PLC) et un modèle YD-30. Les deux modèles sont du type à gaz et ces incinérateurs pour les entreprises locales de crémation pour animaux de compagnie.

Articles / modèle YD-30
Taux de combustion (kg / heure) 30 kg / heure
Capacité d’alimentation (kg) 60 kilogrammes
Poids de l’équipement 2300 kilogrammes
Chambre primaire (litres) 360
Chambre secondaire (litres) 200
Dimensions extérieures (cm) 145 x 90 x 175
Dimensions internes (cm) 100 x 60 x 60
Réservoir d’huile (litres) 200
Ouverture de porte (cm) 48 x 60
Cheminée (M) 5
Type de cheminée Acier inoxydable
Chambre secondaire OUI
Chambre de mélange-combustion OUI
Chambre de filtre à fumée OUI
Combustible de combustion Gaz de pétrole
Temps de résidence 2,0 sec.
Surveillance de la température OUI
1er. Température Chmaber 800 ℃ –1000 ℃
2ème. Température Chmaber 1000 ℃ -1200 ℃


Environnement médical  
Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.
русский

распределитель горелки

Jul 25, 2023 by hiclover 0 Comments #русский

«ПИРОЛИТИЧЕСКОЕ» сжигание, управляя газификацией отходов.

Производителю мусоросжигательного завода необходимо избегать попадания черного дыма и отличной грязи во время загрузки.

Это, безусловно, сможет снизить количество отходов на 98%.

Он должен иметь возможность удерживать разряд во втором сарае с газовым домом не менее 2 секунд.

Сжигание должно происходить без явного дыма и неприятных запахов.

1.0 Горелка первичного розжига обеспечивает розжиг отходов до температуры 850 ° C в дополнение к необходимости выключения для сохранения газа.

Жизненно важная камера сгорания будет создана из толстой стальной пластины, а также внутри системы будет установлена

общий слой лицевой поверхности высокий, а также изоляция из огнеупорного материала.

Минимальный внутренний диаметр дымового вала:? 400, а также его высота: 8 м.

waste

pet burners up for sale

Jul 24, 2023 by hiclover 0 Comments #Blog


SMART ASH INCINERATORS FOR THE DISPOSAL OF HAZARDOUS WASTE
? Quantity: 20 systems
? The Burner collaborates with a 55 gallon open ended up steel drum
? The system operates without fuel as well as used just 120v or 220v electric power for the blowers
? Unit can melting oil contaminated waste and additionally medical wastes with a wetness material of 0 to 15%.
? Each device is offered with 2 steel drums, to make certain that an extra is conveniently available.
? Each unit to be given with suggested spare elements.
? Solution warranty– – minimum one year from billing as well as authorization.
? Individual’s guidebook to be supplied in French and also English

HAZARDOUS WASTE TO BE INCINERATED

Unsafe Strong Chemicals.
Various kind of combustible solids, taken advantage of fabrics, oil and printer toner cartridges, chemicals for water filtration and also image consumables, as well as plastic product, vacant steel/ plastic cans that still have deposits of hazardous items, oil absorptive

Risky Fluid Chemicals.
Primarily numerous kinds of Acid, Paint, Varnish, White Spirit, Aromatic-Less Solvents, Artificial Fluid For Brake Solutions, Airplane De-icing Liquid, Hydraulic And Likewise Compressor Oil, Freon made use of in some older refrigeration systems, Chemical Liquid/Spray, Air Refresh Spray and also various other comparable chemicals

Contaminated Gas.
Primarily diesel or gas infected by water or solvents

Made use of and/or Polluted Oil.
Utilized electrical motor oils and/or mineral oils unfit for their initially implied usage. Usually motor/gear box oil (approx. 80%) contaminated by a combination of white spirit and additionally acetone (approx. 5%) hydraulic liquid (approx 5%)

Polluted Water.
Waste oils/water, seeps, hydrocarbons/water combinations, solutions as well as likewise leachate

Infected Dirt.
Dirt polluted by oil gas of chemicals,.
Soil infected that needs to be reused in garbage dump,.
Dirt dealt with along with transformed on website

Oil Polluted Solids.
Fabrics, absorbents, cardboard, oil and also gas filters, air filters are not considered as dangerous products

Digital Waste.
Waste electric or digital setups or appliances up, including published circuit card having dangerous product and/or significant steel and/or releasing minimized radiation

Used Battery Cells.
Dry battery, ups battery or various other kinds unsorted waste batteries/battery cells, having items that are hazardous

Used Lead Acid Batteries.
Waste lead acid batteries, drained pipes/ un-drained as well as whole or wrecked

Hazardous Medical Waste.
Scientific along with associated waste arising from clinical, nursing or comparable techniques and also waste created in facilities throughout the examination or treatment of individuals (biography risk)

Finished Medicines Strong.
Waste medications, medicines along with drugs, consisting of delicate medicines

Ran out Medicines Fluid.
Waste liquid pharmaceuticals, different kind liquid chemicals for treatment, medical oil in addition to paraffin based finished drugs

Finished and/Or Infected Food.
Spoiled fresh food or meaningless recipe prepared to consume dishes (MRE’s) entirely dry food