Archive: March 19, 2023

Animal Carcass Incinerator

Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Key Features:  * All versions with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *based on order  * High fever, long lifetime of incinerator.  * Free or minimal installation on site.  * PLC Control Plane. *based on order  * New Design for pet animal cremation business.  * One year warranty on incinerator and components in stock. 

Presently, we provide different series for local customer requirements and design upgraded incinerator with our leading technology. Animal iacinerator, creature incincerator pricing, animal incineration, animal incineration emerging technologu, animal incineration equipment in china, animal incineration equipment  Costs, The updated design feature of our assortment of incinerators make them one of the most cost effective in the world.

Items Specification
YD Model YD-30 / YD-50 / YD-100 / YD-150 / YD-200 / YD-300 / YD-500 / YD-600
Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Incinerator Common Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)

portable incinerator manufacturers

Tanque

Capacidade mínima: 500L

Provido de estrutura de suporte

Válvulas

Indicador de nível de tanque

Funil

Filtro de impurezas na boca do tanque

 

 

comprising of, as a minimum, electronic ignition and all necessary interlocks and safety devices to provide safe

 

operation. The chamber and burner shall be designed to maintain a minimum combustion temperature of at least

 

930 to 980 C (1700 to 1800 F), but shall not to exceed 1150 C (2100 F). The ash-removal system shall consist of, as

 

a minimum, the direct manual removal into a dry

 

Cyclone air filters shall be provided to remove the larger particulates. Cyclone air separators may be provided with

 

powered fans to increase the velocity of the gases inside the cyclone to improve the collection efficiency for smaller

 

particles.

 

5.16.2 MEDICAL WASTE INCINERATORS

 

Medical waste incinerators shall be specifically designed by the manufacturer to dispose of all medical wastes. All

units shall be designed for 8 hours

 

per day of continuous operation and be rated in quantity per hour (i.e. kg/hr or lbs/hr).

 

Incinerator loading or charging of medical waste shall be batched-fed manually.

 

Primary combustion chamber shall be the stationary fixed-hearth (or kiln), multiple-chamber, retort type or larger

 

capacity rotary-hearth (or kiln) type. Burner and combustion air controls shall be fully automatic comprising of, as a

 

minimum, electronic ignition and all necessary interlocks and safety devices to provide safe operation. The

New Courtice incinerator hits further delays

CLARINGTON — Clarington’s new energy-from-waste facility will be delayed a second time since the boilers are not operating properly and the continuing startup period could cost Durham Region an extra $1 million.

“I’d rather see it delayed and done right than rushed,” said Clarington Mayor Adrian Foster.

The Durham York Energy Centre facility, located in Courtice, was scheduled to be fully operational on Dec. 14, 2014. Now the Durham York Energy Centre is not expected to be in full working order before the last quarter of 2015.

The significant systems of the EFW facility have been analyzed. The boiler temperature is high enough for the combustion process but the steam temperature isn’t high enough, and officials are not sure what the issue is, says Durham’s works commissioner, Cliff Curtis.

The steam temperature needs to be high enough to drive the turbine-generator. If the steam is too cool it may damage the turbine.

“It’s like running a car without oil,” said Mr. Curtis.

Covanta, the business building and operating the facility for Durham and York regions, has taken down the boilers for alterations, according to Mr. Curtis. It’s expected to take three weeks for the repairs and alterations. Then there’ll be a four-week demonstration period, followed by a 30-day acceptance test.

“We are not getting the temperature we expected out of the boiler. “It’s Covanta’s problem to provide us the product that performs the way they said, so they’re going to take the time they require.”

The delay means added consultant costs for construction management, legal advice and baseline ambient air monitoring. A Durham Region works report stated Durham’s share of the extra costs is $1 million, which can be provided by a temporary draw on the solid waste management reserve fund.

“What’s the last cost going to look like?” Stated Clarington Regional Councillor Joe Neal, who added that he still has concerns about the emissions meeting the Ministry of Environment rules.

Since Jan. 16, Durham has been charging Covanta a $10,000-a-day late fee for each day the EFW facility is not fully operational. The invoice was sent to Covanta, but it hasn’t been paid yet, according to Mr. Curtis.

In mid-February, the incinerator started burning its first haul of curbside garbage. It was a part of a testing phase before the centre opens completely.

Durham cancelled landfill contracts and started sending crap to the Courtice facility. Some garbage was burned at the EFW plant during the evaluation phase, without generating power to the grid. Covanta has also been sending the trash to its incinerator in New York state, or landfills in the Niagara region.

Until the EFW facility is up and running, the Region only pays Covanta half cost of the agreed upon per-tonne fee. However, Durham isn’t earning any money until the plant is fully operational and selling electricity back on the grid.

“We are still on budget. I’d rather be getting electricity sales on the grid,” said Mr. Curtis.

The plant construction is coming in slightly under budget, according to the works commissioner.

There are a few loose ends that could wind up costing Durham Region more cash. There’s still debate with former property owners on the value of the land expropriated for the center, and a ruling is not expected until fall of next year. The final cost for the utility construction and connection costs is expected in coming months. The baseline ambient air monitoring runs until the EFW facility is operational, so the delay in opening signifies an ongoing monitoring cost.

“There’s some small cost over-runs on a few of the smaller items but generally we’re financially on track to bring this on budget and we look forward to having it on line by the end of the year,” said Mr. Curtis.

HOW THIS IMPACTS YOU

The Durham York Energy Centre is designed to process up to 140,000 tonnes of waste each year, and generate 17.5 gross megawatts of renewable energy — enough to electricity between 10,000 and 12,000 houses. A vital part of the financial case for the energy-from-waste facility is dependent upon it generating electric power revenue.

from: http://www.durhamregion.com/news-story/5682601-new-courtice-incinerator-hits-further-delays/

Clover Incinerator

Product Description

The factory workshop local in liuhe Economic Development Zone, suburb of Nanjing and company office local in downtown region. Currently, incinerator line products market insure former Soviet Union region, Africa states, Asia states and Middle East region.  From year 2010, we negotiated with upgraded technology from Europe and America producers and establish alliance relationship in the territory of China market. Unfortunately, competition in other countries market, country discrimination and worries of intellectual property rights trigger collapse eventually. Presently, we investment more attempt, funds and technology development in our own brand, we’re to be among the largest incineration equipment in the world. We have trading division company for professional export company support. 

Incinerator is a incineration equipment, direct fire squander by gasoline fuel or oi gas. As different circumscription, incinerator could be named many words as below: 

Therapy capacity: Small scale incinerator, big scale incinerator and incineration pant. 

Waste substance: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators 

Incinerator gas: Gas incinerator, petroleum incinerator 

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator 

Incinerator Manufacturer: China incinerator producer, UK incinerator producer, USA incinerator producer, India incinerator manufacturer. 

Famous Incinerator manufacturer firm: Inciner8(UK), Clover Incinerator(China), Pennram (USA), Haat (India) 

Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

incinérateur de chien de compagnie à vendre

1. Capacité d’endommagement en poids: 60 Kg / h.
2. Il devrait pouvoir fonctionner pas beaucoup moins de 10 heures / jour
3. Ce brûleur doit avoir la capacité de démolir tous les déchets inflammables créés par les établissements de santé, les cliniques exclusives, les laboratoires, les instituts, etc.
4. Exigences de style: types A, B, C, D et E de déchets médicaux
5. Brûlage «PYROLYTIQUE», en gérant la gazéification des déchets.
6. Le brûleur doit rester à l’écart du dégagement de fumée noire et aussi de grande poussière, tout au long des chargements.
7. Il devrait avoir la capacité de réduire le volume de déchets de 98%.
8. Il devrait être en mesure de retenir la décharge dans le deuxième hangar avec maison à gaz d’au moins 2 secondes.
9. L’incinération doit être complètement sans fumée visible en plus des odeurs désagréables.
10. Le pouvoir calorifique réduit (LCP) de ces déchets sera de 3 500 kcal / kg
? Les niveaux de température de combustion: Le minimum sera de 850 ° C et également le maximum de 1400 ° C
? Brûlure d’article: >> 1100oC.
11. La taille intérieure de l’arbre de fumée 😕 400 et son dénivelé: 8 m.
12. La quantité de la chambre de combustion: 1.200 L.
13. La dimension de la porte pour le chargement en cm: 70 × 70.
14. Le chauffage doit être activé / désactivé automatiquement.
15. Carburant: diesel.
16. Le fournisseur doit fournir les informations nécessaires pour une installation optimale.
Ce brûleur à combustion «PYROLYTIQUE» doit avoir:.
17. Une chambre de combustion des déchets :.
* Porte complètement limitée pour le chargement pratique des déchets. Le chargement doit être Handbook, Set Lots.
* Un brûleur d’éclairage dont l’utilisation est limitée à l’allumage des déchets.
* Façade de garniture avec joints de porte augmentée sur joints, roue de bouchon à vis, joint adaptable, et également garniture de blindage en réfractaire.

медицинские инсинераторы

● Способен сжигать 25-30 кг в час.
● Состоит из двух камер для значительного снижения выбросов.
● Быть способным к температуре в диапазоне от 800 ° C до 1000 ° C
● Конструкция, не требующая обслуживания.
● Должен быть дизельным топливом.
● Требуется мощность более 15 А, 220–250 В
● кВт Потребляемая мощность указывается.
● Бортовой или встроенный топливный резервуар для хранения топлива; для сжигания 25-30 кг отходов необходимо использовать не более 12 л матриц в час.
● Снижение количества твердых отходов в пределах 90-97% (должно достигаться в плановом порядке)
· Обычные отходы, образующиеся ежедневно, включают бумагу, пластик, органические материалы, коробки, пластиковые контейнеры, листья и т. Д .;

· Всего отходов в сутки: 10-12 тонн;

· Режим работы: 10 часов в сутки;

· Требования к топливу: предпочтительнее дизельное топливо или отработанное масло, но будет учитываться сжиженный газ;
Варианты топлива Масло
Расход топлива (дизель) 10 л / час
Средняя емкость 900 кг
Диаметр: длина (мм)
Ширина (мм)
Высота Не вкл. Дымоход (мм)
Дверной проем (мм) 2570
1120
1340
1000 × 1670
Размер внутренней камеры:
Длина (мм)
Ширина (мм)
Высота с дымоходом (мм)
2200
790
790
Операция:
Мин. Температура эксплуатации
Максимум. Температура эксплуатации
Время пребывания во второй камере
Мониторинг температуры
950
1320

2 сек.
ДА
Ключевая особенность
-Автоматическое зажигание
-Автоматический контроль и температура
-До 250 кг в час
-Толстая огнеупорная футеровка, рассчитанная на температуру 1600 ° C в основной камере, сохраняет тепло, повышает эффективность
-Теплостойкая сталь толщиной 5 мм.
-Нержавеющая сталь
-12 см огнеупорной футеровки – армированной сталью.
-12 месяцев или 1000 часов гарантии
-Система рекуперации тепла
-Широкая дверца для удаления золы
-Большая верхняя открывающаяся крышка для удобной загрузки

medical waste incinerator china

medical waste incinerator china, Design, supply and manufacture ex works of one Surefire Manual Load TS50/1 Medical/General waste incinerator as detailed below: –

·         Waste type: Mixed type o,1,2,3,&4 hospital/clinical bio hazard waste

·         Waste density: 125 to 350Kg/M3

·         Waste CV: 4000 KCAL/kg

·         Moisture content: 10-25%

·         Estimated ash residue: 5-10%

·         Nominal capacity: 30Kg/hour batch load

·         Secondary chamber: 0.5 second @ 850oC
·         Compact laboratory style

·         Two combustion chambers

·         Ecologically friendly

·         Up to 50kg of waste / hour

·         To be used for animals

Melt blown Production Line 400mm and 1600mm and ES Fiber Production Line and N95 Mask Machine and Disposable Mask Machine

1. 400mm and 1600mm Melt blown Production Line

3. ES Fiber Production Line

 

 

 

N95 Face Mask Machine Production Line

Melt blown Production Line

 

A.)Optional Capacity: 1600mm

Efficiency: 95-97percent

FOB Term Cost: USD per set

Price Valid: 5days.

Ave.60 Days ready for shipping.

In stock Price: USD per set

 

 

B.)Optional Capacity: 400mm

Efficiency: 40-50%.

FOB Term Cost: USD per set

Price Valid: 5days.

Ave.20 Days ready for shipping.

Payment: TT 70% In advance, TT 30% before leave factory

Shipping: 1*20′ container per set, Ave. 2000Kgs.

 

Main Parts: Extruder, mold, winder, oven, ultrasonic

Daily Capacity:100-150Kgs/24Hours

Screw extruder:100-150Kgs

Motor power: 15KW frequency conversion speed regulation Reducer speed ratio: 1:10 or 1:16 Screw length to diameter ratio: 30: 1 Screw diameter: 50mm Winding machine diameter: £ 630mm Winding machine drive motor power: 0.55kw speed ratio of winder drive reducer (if any): 1:71 Air heater power: 15kw Power of vacuum calciner: 12kw The magnitude of vacuum calciner: 500 × 300 × 200 Ultrasonic power: 1800, frequency 28kHZ Ultrasonic sink size: 800 × 300 × 250

 

 



HICLOVER – Medical Environmental 

2020-04-20


 

Tel: +86-25-8461 0201
Email3: [email protected]
Wechat: 008613813931455
Email1: [email protected]
Twitter ID: @hiclovercom
Website1: www.hiclover.com
Email2: [email protected]
WhatsApp: 008613813931455
Website2: www.clover-incinerator.com

Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-20

Municipal Waste Incinerator

Basic Info.

Model NO.:medical waste incinerators vs animal crematory
Export Markets:Global

Product Description

1. Clover Medical Limited save all rights to mend/update product information on website. The specifications are subject to change without prior notice. 

2. We accept business term: FOB/C&F/CIF term, by sea/train, full container or bulk goods. 1. FOB (Free on Board), the price leave China port. 2. C&F (Cost and Freight), FOB price and freight cost. 3. CIF (Cost and Insurance and Freight), FOB price and insurance fee and freight cost. 

3. Payment Term: 
By sea: 50% deposit T/T (bank transfer) in advance, and 50% balance T/T before shipping day. 
By Train: 100% T/T in advance. 

4. Shipping Document & Packing: Generally, We supply (1)Bill of Lading (Way Bill), what’s sample…(2)Commercial Invoice, (3)Packing List ONLY. 
If any further documents/certification and label print/words on packing material or documents which request by importer or local customs, whatever happen in China or oversea, should inform seller in advance and charge as actual cost. For example, Fumigation Certification, embassy certificate, BV/SGS…Inspection, certificate of original (C/O), Form A, etc. Buyer must to inform seller in advance and pay these cost. Seller save all rights to postpone/cancel shipping waste incinerator China, waste incinerator dual chamber, waste incinerator made by clover, waste incinerator manufacturer, waste incinerators manufacturers, wastewater incinerator, and request lost cost cause this incident. If the importer local customs arrest/request penalty or other situation caused by buyer mistake, Clover Medical save all right to request compensation/litigation. Thanks for your cooperation. 

5. The leading time is mostly 3-6 weeks, depending on the products and quantity. 

7. Guarantee: One year for the equipment. We supply spare parts for maintenance, free charge within the first year and the delivery charge is on the buyer. 

8. Insurance: Bear all risks of loss of or damage to the goods from the time they have passed the ship’s rail at the named port of shipment. We proposal apply All Risks insurance under each contract. When buyer pickup goods at local site, must inspect carefully. If any damage happened under insurance policy, buyer should inform insurance company and Clover Medical Limited immediately. We will provide necessary assistance.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Canopy filter cotton (патио фильтр хлопок)

2019-05-13 Воздушный фильтр349 просмотров

Ecolead Canopy Filter Cotton (патио фильтр хлопок)

=== Характеристики продукта ===
1. Фильтрующий материал изготавливается нетканым способом, многонаправленным, постепенным и наматыванием в зависимости от толщины и плотности волокна.
2. Постепенно плотная структура может блокироваться на разных уровнях плотности в зависимости от размера частиц пыли, с большой пылеулавливающей способностью.
3. Он может сохранять первоначальную форму при определенной скорости ветра, увеличивать срок службы фильтра и снижать стоимость замены.
4. Он изготовлен из композитных волокон с разными температурами плавления внутри и снаружи, а соединения между волокнами прочные и плотные, и их нелегко отвалить.
5. Хлопковый фильтр доступен с полной вязкостью (трехмерное распыление клея), полусклейким (поверхностное распыление) и нелипким (без клея).
6. Может быть добавлена рама из оцинкованной стали или рамы из алюминиевого сплава, а также может быть добавлена металлическая задняя сетка, которая может эффективно поддерживать сетку фильтра, выдерживая большой объем воздуха и не деформируясь.

=== Применение продукта ===
Хлопчатобумажный фильтр с навесным фильтром используется в системе подачи воздуха наверху покрасочной фабрики, окрасочной камере и пекарной камере для сбора мелких частиц пыли, предотвращения загрязнения краски, обеспечения высокой степени чистоты воздуха в помещении и обеспечения распределения воздуха. в покрасочной комнате равномерно распределены

модель

CL 630G

CL 600 г

C-600G

AF-600G

FS-620G

ФС-600Г

ФС-350Г

С-600Г

S-560G

Материал

Полиэстер

Средний весовой коэффициент полезного действия

99%

98%

98%

98%

99%

98%

95%

97%

95%

Тест скорости ветра

0,25 м / с

0,25 м / с

0,25 м / с

0,25 м / с

0,25 м / с

0,25 м / с

0,25 м / с

0,25 м / с

0,25 м / с

Номинальный ветер

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

900 м 3 / ч

Начальное сопротивление

45 Па

30 Па

35 Па

35 Па

45 Па

30 Па

28 Па

30 Па

25 Па

Рекомендуемое окончательное сопротивление

350 Па

400 Па

400 Па

450 Па

350 Па

450 Па

450 Па

450 Па

300 Па

Максимальная пылеулавливающая способность

520 г / м 2

450 г / м 2

450 г / м 2

430 г / м 2

480 г / м 2

430 г / м 2

400 г / м 2

450 г / м 2

380 г / м 2

Уровень фильтра

F5

F5

F5

F5

F5

F5

F5

F5

F5

Устойчивость к влажности

100%

100%

100%

100%

100%

100%

100%

100%

100%

Постоянная термостойкость

120

120

140

140

140

120

120

120

120

Нормальная толщина

25мм

22мм

22мм

22мм

25мм

22мм

20мм

22мм

22мм

Стандартный размер ( м )

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

1,6 × 21
2,0 × 21
1,0 × 21

URL с дополнительным содержанием: www.ecolead.cn Тел: 025-57138032