Archive: March 10, 2023

Incinerator Burner

Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover
Origin:Nanjing

Product Description

Please fill in following items and send back to us. Benefit of petrol hospital incinerator, algeria incinerators, animail incenrator, animal by-products of the incineration plant strategy, animal carcas incineration, We will study following important information and proposal our product versions, specification and so on.

Item Customer Request Example
Application Scope  
 
 
 
Hospital, Pet Crematory, Slaughter House, Laboratories, School, Community, etc. if for animal/pet, indicate animal size like: cat, dog, cattle, etc
What kind of waste?  
____, _____%
____, _____%
____, _____%
 
 
Medical waste, dead animal, Municipal Waste, etc(detail name) or nature percent
if for animal/pet, indicate animal size like: cat, dog, cattle, etc
Quantity Request    
01.02.03^..unit
 
Budget    
$US Dollar.
 
 
Operating Time    
The staff work Hours per day.
Our incinerator can work up to around 18 hours per day.
Realization Date of project In ___ year  
Waste Output Capacity per Day?  
 
1000kgs Per Day^
Request waste burn rate   Capacity: 100kgs Per hour^
Request waste feed capacity   Capacity: 100kgs per feed^
Whether Natural Gas Supply Local?   Yes or No.
Local Power   If 380V and 220V valid?
Product Installation Destination  
 
Country or City name
DestinationSeaport name?   To check sea freight charge.
 
Customer    
End-Customer, Agent, Government.
 
Method of contract   Tender or Negotiation
Date of Tender limit    
How did you know our company?    
Other request or information  
 
 
 

brûleur de déchets médicaux à bas prix

Tas:
Type: Cordon pris en charge
MOC: Acier doux de ISstd
Altitude: 3 mètres ou même plus
– TRAITEZ AU MOINS 1 LOT DE DÉCHETS MÉTRIQUE PAR JOUR
– UTILISABLE PAR 1 INDIVIDUEL, SANS AUCUNE FORMATION REQUISE
– LE CONTENEUR D’ENTRETIEN RÉGULIER DOIT ÊTRE REMPLI PAR 1 PERSONNE AVEC UNE FORMATION MINIMALE
– LA MAINTIEN DE ROUTINE NE DOIT PAS ALLER AU-DELÀ D’UNE HEURE CHAQUE JOUR
– CONFORME AUX SPÉCIFICATIONS D’ÉCHAPPEMENT EURO / OU US-EPA
– CAPACITÉ D’INCINÉRER LES DÉCHETS D’HUILE, DES HUILES ET ÉGALEMENT DES LUBRIFIANTS
– LES TEMPRATURES PENDANT LA PROCÉDURE DE COMBUTION EXIGENCES SURPASSENT 1500 ° F PENDANT UN MINIMUM D’UNE HEURE
– LA CANISTER DOIT ÊTRE LIVRÉE À PARTIR DU LIEU DE DÉPLOIEMENT DANS UN CONTENEUR ISO DE 20 PIEDS OU PLUS PETIT
– CAPABLE DE 1 JOUR D’UTILISATION CONTINUE
– SYSTÈME DE CHARGEMENT AUTOMATIQUE
– SYSTÈME D’ÉLIMINATION DES CENDRES INFORMATISÉ
– SYSTÈME DE NETTOYAGE À GAZ
– 95% DE RÉDUCTION DES DÉCHETS SOLIDES
– OPERABLE AVEC DIESEL, JP8 OU GAZ OIL
– AVEC LA CAPACITÉ DE FUSION DE 4 UNITÉS DE DÉCHETS CHACUNE DE GAZ
– CAPABLE D’INCINÉRER LES DÉCHETS COMBUSTIBLES Y COMPRIS: PAPIER, PLASTIQUE, CARTON, ALIMENTATION, HUILES USAGÉES, BOUES, CHIFFONS HUILEUX ET

PALETTES EN BOIS.
– AUCUN PRÉ-TRAITEMENT DES DÉCHETS REQUIS
– SERVICE DE RÉPARATION FOURNISSEUR OFFERT AU FACTEUR D’EXPÉDITION
– GARANTIE DES COMPOSANTS DE CINQ (5) ANS À PARTIR DE LA DATE D’APPROBATION
Nous sommes une entreprise de fabrication d’aérosols. Nos produits comprennent des déodorants, des déodorants anti-transpirants, des désodorisants,

Les tueurs d’insectes et ainsi de suite.

Incinerator

Basic Info.

Model NO.:PLC Incinerator
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

Key Features:  * All models with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *according to order  * High temperature, long lifetime of incinerator.  * Free or minimal installation on site.  * High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day.  * PLC Control Plane. *based on order  * New Design for pet animal cremation company.  * One year warranty on incinerator and parts in stock.

Items Specification
Model TS10(PLC) / TS20(PLC) / TS30(PLC) / TS50(PLC) / TS100(PLC)
Main Product List Double Combustion Chamber
Smoke Filter Chamber
PLC Mode Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)

Dedicated Medical Waste Incinerators

Basic Info.

Model NO.:double-chamber pyrolytic incinerators
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Product Description

Nanjing Clover Medical Technology Co., Ltd. 

Nanjing Clover Medical Technology Co., Ltd..

Key Features:  * All versions with Dual combustion chamber. *based on order  * Stainless Steel chimney/stack, long lifetime. *based on order  * High temperature, long lifetime of incinerator.  * Free or minimum installation onsite.  * High speed, from 10kgs to 500kgs per hour, up to 6ton per day.  * PLC Control Plane for Intelligent operation. *based on order  * New Design for pet animal cremation enterprise.  * One year warranty on incinerator and parts in stock.  Presently, incinerator line goods marketplace cover former Soviet Union area, Africa countries, Asia countries and Middle East area.  From year 2010, we negotiated with updated technology from Europe and America producers and establish cooperation relationship in the territory of China marketplace. Unfortunately, competition in different countries marketplace, nation discrimination and worries of intellectual property rights cause failure eventually. Presentlywe investment more attempt, funding and technology advancement in our own brand, we’re to be among the largest incineration equipment on earth. We have trading division firm for expert export company service.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

incinérateurs pour animaux de compagnie chinalarge de fabricant de pyrolyse de déchets transmissibles

Les principaux composants sont: éthanol, paraffine, silicium, chlorhydrate d’aluminium, Bentone, GPL

devis pour les incinérateurs pour la thérapie commerciale des déchets chimiques,

1 taux de combustion doit être ordinaire de 30 kg / h
2 dans le produit de la chambre doit être du ciment de béton réfractaire
3 il fonctionne dans trois systèmes diesel / gaz ou GPL
4 la tension doit être de 220 V

5 le niveau de température intérieure doit d’abord être 1000c et le second doit être 1200c
6 la longueur du pipeline doit être de 20 m

Nos besoins sont de 125 kg / h et également de 42 kg / h, veuillez envoyer un devis avec catalogue pour les deux options
Nous traitons actuellement des dispositifs liés à la défense, des aides à la construction et du matériel médical, des solutions modulaires.

pour les hôpitaux, le système de surveillance des déchets, le CSSD, l’ameublement des installations médicales et également les fournisseurs. Nous sommes basés dans la capitale de

Pakistan c’est-à-dire Islamabad, où se trouvent tous les postes de travail principaux des militaires ainsi que du gouvernement. établissements. Nous avons la capacité de

Participez aux appels d’offres et nous avons également un solide réseau de concessionnaires énergiques / actifs ainsi que du personnel de vente au Pakistan et

Afghanistan.
5 incinérateur 15 kg les exigences Brûleur haute température 99% de performance de combustion Niveau de température jusqu’à 1200 ° C ou

Sans fumée et sans odeur Rétention de chaleur exceptionnelle Alimentation électrique Temps de chauffe rapides Niveau de température Jusqu’à 1200 ° C ou selon les besoins

Capacité 15 Kg Efficacité de combustion 98% Bruit- << 78db Puissance – – Chambre électrique Solitaire / Double chambre Alarme de sécurité Situation d’urgence

dispositif de surveillance d’évent d’air outil de contrôle de la pollution atmosphérique CE et également certifié ISO

Je voudrais vous poser une question concernant une centrale nucléaire en brûlant des déchets. Nous avons un certain nombre de camps pour personnes déplacées en Syrie, et nous

souhaitez acheter une usine de création d’énergie électrique par incinération locale de déchets Merci de m’envoyer une offre ou tout type d’information.

small medical waste incinerator

i- burners:

use diesel , natural gas , liquefied petroleum gases according to standards burners should have main vent to be used

for protection.

2- materials:

-the chamber should be covered from inside with refractory brick with thickness 22 cm aluminum silicate insulation 11cm

thickness with the ability to change this layer .

– All surfaces made of carbon steel should be surface treated and covered with primary layer. That holds the working

condition and easy to clean it is recommended that materials are chosen according to standard codes.

Chimney exhaust gas filtration:

To meet the European standard 2000/76/EC

Chimney height should not be less than 12 meter and radius 8 cm.

 

– Treat the gas has a minimum temperature of 1100 ° C with a minimum residence time of two seconds the afterburner is

to;

– A secondary air injection is expected and provides perfect oxygen content;

– The burner ensures a minimum temperature of 1100 ° C continuous;

– The design of this burner is similar to combustion burners;

– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;

– The afterburner is lined with high thermal insulation with a thickness of 150 mm

 

  1. Cabinet, control and regulation:

– The entire installation will conform to European standards (EU)

– The electrical power is 220V 50Hz single phase.

– Regulators of temperature with digital display:

? 1 to regulate the temperature of the combustion chamber

? 1 for controlling the temperature of the afterburner

? The manual controls are provided on each item.

  1. Should have preparation, Incineration, Scrubber steps to burn waste completely and waste gas should be non-

polluted

 

  1. Heavy duty steel, heat resistant coating, stainless steel lid, painted tubular steel frame, 2-blowers, axial

vane, suitable drum (S/S, thick) for the incinerator must be provided.

 

  1. Approx. 20 to 25 Kg per batch and the time required for 1 batch not more than 1 hour on average.

Перспектива развития фильтра очистки воздуха FFU

22 мая 2019 г. Новости отрасли 225 просмотров

Развитие науки и технологий меняется с каждым днем, но, хотя наука и технологии приносят пользу людям, они также несут скрытые опасности. Наиболее очевидным является то, что наша повседневная среда жизни становится все хуже и хуже.

Что касается воздуха, которым мы обычно дышим, то качество воздуха становится все хуже и хуже, дни с туманом можно увидеть повсюду. Несколько дней в месяц без смога, а ладан уже горит.

Плохое качество воздуха также повлияет на здоровье людей, поэтому многие люди осознают важность для них качественного воздуха. Таким образом, использование сцены воздушного фильтра FFU от промышленных до домашних все более и более широкое.

В настоящее время у людей нет проблемы с едой и одеждой, поэтому требования к среде, в которой они живут, становятся все выше и выше. Люди больше не могут распознать низкокачественную воздушную среду. Людям нужны продукты для фильтрации воздуха с более высокими характеристиками, а воздушные фильтры из FFU могут принести людям ту воздушную среду, в которой они нуждаются.

Nanjing Yixiou Technology Development Co., Ltd. специализируется на исследованиях и разработках и производстве чистого оборудования, специализируясь на производстве FFU и воздушных душевых с высокоэффективными фильтрами, фильтрами средней эффективности и первичными фильтрами и т. Д.

Бытовой очиститель воздуха из FFU, производимый Nanjing Yixiou Technology Development Co., Ltd., отличается сверхдлительным сроком службы, сверхнизким уровнем шума и сверхэффективной фильтрацией, а также длительным сроком службы.

В настоящее время во многих жилых домах Китая нет систем фильтрации воздуха. В Китае огромное количество жилых районов, и количество домов постоянно увеличивается.Поскольку качество воздуха во многих местах постоянно снижается, а здоровье людей и охрана окружающей среды конкурируют друг с другом, применение систем фильтрации и очистки воздуха в гражданском промышленность – перспективный рынок.

URL с дополнительным содержанием: www.ecolead.cn Тел: 025-57138032

Medical Waste Incinerator

Basic Info.

Model NO.:medical waste incinerator manufacturer
Export Markets:Global

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. The factory workshop local in liuhe Economic Development Zone, suburb of Nanjing and business office local in downtown area. Presently, incinerator line products market cover former Soviet Union area, Africa countries, Asia countries and Middle East area. 

From year 2010, we negotiated with updated technology from Europe and America manufacturers and establish cooperation relationship in the territory of China market. Unfortunately, competition in other countries market, country discrimination and worries of intellectual property manufacturer pet equipment, manufacturers for medical waste incinerators, manufacturers of animal incinerators, manufacturers of equipment for waste incineration, rights cause failure finally. Presently, we investment more effort, funds and technology development in our own brand, we are to be one of the largest incineration equipment in the world.

Items Specification
Model TS10(PLC) / TS20(PLC) / TS30(PLC) / TS50(PLC) / TS100(PLC)
Main Product List Double Combustion Chamber
Smoke Filter Chamber
PLC Mode Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)

Incinerator A2400

Basic Info.

Model NO.:A2400
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Key Features:  * All models with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *according to sequence * High fever, long lifetime of incinerator.  * Free or minimal installation on site.  *based on order  * New Design for pet animal cremation company.  * One year warranty on incinerator and components in stock.  Is a major waste incinerator manufacturer in China. We’re local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is primary waste treatment all the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr. , up to 6ton per day. Currently, medical waste incinerators manufactures and suppliers, medical waste incinerators vs animal crematory, medical waste incinrators in china, medical waste italy, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design characteristic of our range of incinerators make them one of the most cost effective in the world.

Items/Model A1500 A2400 A4000 A5500
Burning Rate *animal 90 kgs/Hr. 150 kgs/Hr. 200 kgs/Hr. 400 kgs/Hr.
Feed Capacity *animal 120 kgs 200 kgs 300 kgs 500 kgs
Equipment Weight 7000 kgs 8300 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 1500 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 240x170x380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 150x100x96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 500 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree

Сжигатель для научных отходов 100кг Style TS100

производитель инсинераторов, медицинских инсинераторов, малых инсинераторов, мазутных инсинераторов

Предметы / Модель

TS100

Стоимость сарая

Обычная 100 кг / час

Емкость подачи

Стандарт 200 кг / корма

Режим управления

ПЛК

Камера сгорания

1200L

Внутренние измерения

120x100x100 см

Вторая палата

600 л

Камера дымового фильтра

да

Режим подачи

Руководство по эксплуатации

Напряжение

220В

Мощность

0,7 кВт

Потребление масла (кг / час)

14– – 28

Расход газа (м3 / час)

10– – 32,2

Монитор уровня температуры

да

Уровень температуры Степень защиты

да

Емкость для масла

200л

Дверца подачи

80×60 см

Дымовой вал

10 метров

Вид дымового вала

Нержавеющая сталь

1-й.

Вес брутто

6000кг

Внешние измерения

260x150x180 см

2020-04-06

Внешние измерения

260x150x180 см



HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-04-06