Archive: December 5, 2022

50 كجم في الساعة محرقة

معلومات أساسية.

مصادر السحب: معالجة النفايات الصلبة
طرق المعالجة: الاحتراق
أسواق التصدير: عالمية

معلومات إضافية.

العلامة التجارية: Clover Incinerator

وصف المنتج

Nanjing Clover Medical Technology Co.، Ltd. ، يقع في مدينة نانجينغ ، الصين. CLOVER هي شركة مصنعة للمنتجات الطبية ومحرقة النفايات وغيرها من معدات حماية البيئة. شبكة السوق عبر أراضي الصين وأكثر من 30 دولة في جميع أنحاء العالم.
محرقة YDC هي أحدث تصميم لمعالجة النفايات ، وتشمل النفايات الطبية وحرق الحيوانات والنفايات الصلبة الأخرى. هذه المعدات ذات الجودة الهيكلية لأنواع الموقع ، ودخان المرشح للمحارق ، ومصنع الطوب المحروق ، ومحرقة المداخن ، ومحرقة الطعام ، ومحرقة صغيرة للبيع ، ومصنعي محارق الحروق في الصين ، مثل المستشفى ، وإدارة البيئة ، ووكالات حرق الحيوانات ، إلخ توفر محرقة CLOVER نماذج محدثة بغرفة احتراق مزدوجة وغرفة احتراق مختلطة وغرفة مرشح دخان بخطوط مقاومة للحرارة ودرجة حرارة غرفة الاحتراق تصل إلى 1200 درجة مئوية.

العناصر تخصيص
نموذج YDC YD-10C / YD-20C / YD-30C / YD-50C
قائمة المنتجات الرئيسية غرفة الاحتراق الأولية
غرفة الاحتراق الثانوية
مزيج غرفة الاحتراق
غرفة مرشح الدخان
حالة التحكم في المحرقة المشتركة
مدخنة ستانلس ستيل
موقد الزيت / الغاز في إيطاليا: 02 وحدة
خزان الزيت (إذا كان زيت الوقود)

اتصل الآن هاتف: + 86-25-8461 0201

Малая установка для сжигания отходов, 30 кг в час, доставка »

Шесть комплектов установки для сжигания медицинских отходов производительностью 30 кг / час для Афганистана.

Предметы / Модель TS30 (ПЛК)
Скорость сжигания 30 кг / час
Емкость подачи 60кг
Режим управления ПЛК
Камера сгорания 330 л
Внутренние размеры 75x75x60 см
Вторичная камера 180л
Камера дымового фильтра да
Режим подачи Руководство по эксплуатации
Напряжение 220В
Мощность 0,5 кВт
Расход масла (кг / час) 10,2–20
Расход газа (м3 / час) 9,8–20
Монитор температуры да
Температурная защита да
Масляный бак 100л
Дверца подачи 55×50см
Камин 5 метров
Тип дымохода Нержавеющая сталь
1-й. Температура камеры 800 ℃ –1000 ℃
2-й. Температура камеры 1000 ℃ -1200 ℃
Время проживания 2.0 сек.
Вес брутто 3000кг
Внешние размеры 175x120x140 см

Nanjing Yixiou เสร็จสิ้นการส่งมอบและยอมรับชุดตัวกรองประสิทธิภาพสูงรุ่นเยาว์ ตัวกรองเคมี ตัวกรองแบบม้วน และตัวกรองอากาศแบบขดลวดป้องกันการระเบิดชุดใหม่

2019-05-18 ข่าว บริษัท 384 มุมมอง

ลูกค้าองค์กรชาวญี่ปุ่นที่มีชื่อเสียงจาก Nanjing Yixiou มาที่บริษัทของเราเพื่อรับงานยอมรับผลิตภัณฑ์ เอกสารและผลิตภัณฑ์ที่เกี่ยวข้องของตัวกรองประสิทธิภาพสูงระดับจูเนียร์ ตัวกรองแบบม้วน และตัวกรองขดลวดที่ป้องกันการระเบิดได้ผ่านข้อกำหนดในการตรวจสอบและตรวจสอบอย่างเข้มงวดของลูกค้าแล้ว . ผ่านการยอมรับและเสร็จสิ้นการผลิตสินค้าทั้งชุดก่อนกำหนด

URL เนื้อหาเพิ่มเติม: www.ecolead.cn โทร: 025-57138032

Medical incinerator primary combustion price

environment contract management firm with planned operations 2013 in Indonesia and Thailand, and 2014 in West & East

Malaysia to execute those professional services in order to abide by the governments safety disposal requirements

for hospital and medical, clinical waste in the region and to meet the higher technical standard in this particular

field.small incinerators with filter (with minimum minimal pollution) for burning/combusting 5kg/hr, 10kg/hr, 15 kg/hr,

20kg/hr, 25kg/hr to 50kg/hr and 300kg/hr of SOLID ORGANIC DRY AND WET NON-HAZARDUOUS of any type (including hospital

wastes) per day or per hour. Should it be without a smoke, no fumes, no odour (odor ), no dust, no emission of solid

particles and with least minimal contamination (within national and global standards). Must be

healthy and okay with global standards. Ash contents after burning

should be 3-4%.

Within the framework of an environmental and medical equipment & technology consultation and joint purchasing, this

Procurement Bureau invites applicants for pre-qualification in the aim of primarily selecting capable companies to bid

for the above tender.

Our normal activities creates 2-5 tons of assorted waste materials per day which range from condemned carcasses, and medical incinerator main combustion price

other wastes all that need to be incinerated at above 800Centigrade measured flue exhaust gas.To be employed by little

hospitals and clinics to safely dispose of infectious and pathological wastes.

Load Capacity in the range of up to 200 kg
And to be designed to fulfill the Norms of Pollution Control / DEFRA, etc.. Tech:

Temperature Controlled Burner. Heavy-duty casing, to be a quality, rugged, reliable, economical Medical Waste

Incinerator with relevant control, easy to operate and self explanatory. Type of Fuel: Diesel / Oil or Petrol.
– Burning Rate approx. 50kg/Hour –

Incinerators to be very effective, fuel efficient with high / low capacity burn speeds

Brûleur de déchets médicaux pour le coronavirus COVID-19


Incinérateur de déchets médicaux HICLOVER en stock (production finie et semi-finie et nouvelle)
Modèle Capacité / taux de combustion Pour l’hôpital SickBed No. Type de carburant Qté. Prêt pour l’expédition Nouvelle production
TS30 moyenne 30kgs par heure Moyenne 150 lits de maladie Diesel 1 jeu 5 jours 20sets / 2 semaines
TS50 50kg en moyenne par heure Moyenne de 250 lits de maladie Diesel 1 jeu 7 jours 20sets / 2 semaines
TS100 en moyenne 100kgs par heure 500 lits de maladie en moyenne Diesel 1 jeu 7 jours 15 ensembles / 2 semaines
TS150 150kg en moyenne par heure 750 lits de maladie en moyenne Diesel 5 ensembles 7 jours 15 ensembles / 2 semaines
YD10 moyenne 10kgs par heure Moyenne de 50 lits de maladie Diesel 2 ensembles 7 jours 20sets / 2 semaines
YD20C moyenne 20kgs par heure Moyenne de 100 lits de maladie Diesel 2 ensembles 7 jours 20sets / 2 semaines
YD50C 50kg en moyenne par heure Moyenne de 250 lits de maladie Diesel 2 ensembles 7 jours 20sets / 2 semaines
YD30 moyenne 30kgs par heure Moyenne 150 lits de maladie Diesel 1 jeu 5 jours 20sets / 2 semaines
YD30 petit moyenne 30kgs par heure Moyenne 150 lits de maladie Diesel 2 ensembles 5 jours 20sets / 2 semaines
YD50 50kg en moyenne par heure Moyenne de 250 lits de maladie Diesel 2 ensembles 5 jours 20sets / 2 semaines
YD100 en moyenne 100kgs par heure 500 lits de maladie en moyenne Diesel 1 jeu 10 jours 15 ensembles / 2 semaines
YD150 150kg en moyenne par heure 750 lits de maladie en moyenne Diesel 1 jeu 10 jours 15 ensembles / 2 semaines
YD300 300kg en moyenne par heure 1500 lits de maladie en moyenne Diesel 10 ensembles / 2 semaines
YD500 500kg en moyenne par heure Moyenne de 2500 lits de maladie Diesel 5 ensembles / 2 semaines
CA 50 Mobile conteneurisé 50kg en moyenne par heure Moyenne de 250 lits de maladie Diesel 2 ensembles 15 jours 10 ensembles / 2 semaines
HICLOVER – Environnement médical  

Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

2020-04-02

HIGH TECH MEDICALWASTE INCINERATOR

Incinerator model A
Burn Rate 65kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
10m Hose Pipe, indicate length
I000 Litre Fuel Tank + Pipe System, indicate volume
Additional chimney extension, indicate height
Warranty, indicate no of years
i.    The primary combustion chamber shall be accepted as the primary combustion zone;
ii.    The minimum combustion temperature of the primary chamber shall not be less than 800 degrees C;

Secondary combustion
The residence time in the secondary chamber shall not be less than 2 seconds;
The gas temperature as measured against the inside wall in the secondary chamber, not in the flame zone, shall not be less than as indicated in Lots 1-7 ;
Both the primary and the secondary temperatures shall be maintained until all the waste has been completely combusted;

Chimney
The chimney shall have a minimum height of 4 meters above ground level;
The minimum exit velocity of the emissions shall not be less than 10 metres/second;

Temperature Warnings
An audible and/or visible alarm to warn the operator when the secondary temperature drops to below the required temperature;

General
Control box can be detached and mounted on separate stand at least 1.5 meters from incinerator at approximately 1.6 meter height;

Lot 2
Item 5    Incinerator model B
Burn Rate 150kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Diesel/LPG/LNG, please indicate
Power Supply for Control Box- 220V-240V 50Hz single phase
Minimum operating temperature 920 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 6    10m Hose Pipe, indicate length
Item 7    I000 Litre Fuel Tank + Pipe System, indicate volume
Item 8     Additional chimney extension, indicate height
Warranty, indicate no of years
Lot 3
Item 9    Incinerator model C
Burn Rate 250kg/h minimum
Weight (kg) please indicate:
Secondary Chamber
Gas Retention Time 2 Seconds
Fuel Diesel/LPG/LNG, please indicate
Power Supply for Control Box 220V-240V 50Hz single phase
Minimum operating temperature 920 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 10    10m Hose Pipe, indicate length
Item 11    I000 Litre Fuel Tank + Pipe System, indicate volume
Item 12    Additional chimney extension, indicate height
Warranty, indicate no of years
Lot 4 – High Temperature Waste Incinerator
Item 13    HTW Incinerator model D
Burn Rate – 150kg/hour minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time 2 Seconds
Fuel Diesel/LPG/LNG, please indicate
Power Supply for Control Box 220V-240V, single phase 50-60Hz
Minimum operating temperature 1200°C, please indicate
One year Spare Parts Package for complete maintainability
Item 14    10m Hose Pipe, indicate length
Item 15    1000 Litre Fuel Tank + Pipe System, indicate volume
Item 16    Additional chimney extension, indicate height
Warranty, indicate no of years
Lot 5 – Mobile Incinerator
2.    Incinerator provides 2 chamber incineration and holds gasses for a minimum of 2 seconds.
3.    Each incinerator must have adequate labelling for parts/areas of high occupational health and safety risk on the incinerator.
4.    Evidence their product meets relevant national or international emissions standards, such as the United States Environmental Protection Agency, United Kingdom Department for Environment Food
& Rural Affairs, or European Union regulations and directives.

Item 17    Mobile Incinerator model E
Burn Rate 50kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 18    10m Hose Pipe, indicate length
Item 19    1000 Litre Fuel Tank + Pipe System, indicate volume
Item 20    Additional chimney extension, indicate height
Lot 6 – Mobile Incinerator
Item 21    Mobile Incinerator model F
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 22    10m Hose Pipe, indicate length
Item 23    1000 Litre Fuel Tank + Pipe System, indicate volume
HTW Mobile Incinerator model G
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 1200 °C, please indicate
One year Spare Parts Package for complete maintainability
10m Hose Pipe, indicate length
1000 Litre Fuel Tank + Pipe System, indicate volume

中效/亞高效有隔板過濾器

2019年05月13日 空氣過濾器 340 views

Ecolead中效/亞高效有隔板過濾器

產品特性:

l   外框:木框、鍍鋅框、鋁合金框或不鏽鋼框

l   濾料:超細玻璃纖維濾紙

l   最高溫度:80℃

l   最高濕度:99%

l  效率:≥80%@1um(F8)≥95%@0.3um(H10)(EN779)

產品應用:

l   主要用於空調系統的中級過濾及高級過濾

l   高效過濾器的前段過濾

初阻力-風量關係曲線圖

常用規格及性能參數

  

外形尺寸

過濾面積

(m2)

額定風量

(m3/h)

初始壓降

(Pa)

××(mm)

  

高風量

  

高風量

F8

H10

H13

TH230

230×230×110

0.8

1.4

110

180

≤85

≤175

≤235

TH320

320×320×220

4.1

6.1

350

525

TH484/10

484×484×220

9.6

14.4

1000

1500

TH484/15

726×484×220

14.6

21.9

1500

2250

TH484/20

968×484×220

19.5

29.2

2000

3000

TH630/05

315×630×220

8.1

12.1

750

1200

TH630/10

630×630×220

16.5

24.7

1500

2250

TH630/15

945×630×220

24.9

37.3

2200

3300

TH630/20

1260×630×220

33.4

50.1

3000

4500

TH610/03

305×305×150

2.4

3.6

250

375

TH610/05

305×610×150

5.0

7.5

500

750

TH610/10

610×610×150

10.2

15.3

1000

1500

TH610/15

915×610×150

15.4

23.1

1500

2250

TH610/20

1220×610×150

20.6

30.9

2000

3000

TH610/05X

305×610×292

10.1

15.1

1000

1500

TH610/10X

610×610×292

20.9

31.3

2000

3000

1、若遇規格、結構變更,以本公司提供的最新數據為準

2、本公司接受非表上規格過濾器產品的訂貨

更多內容 網址: www.ecolead.cn 電話: 025-57138032

Capacity of Burner for The Incinerator of 100kg/Hr

Basic Info.

Model NO.:waste incinerators equipment manufacturers
Export Markets:Global

Product Description

Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock. 

Application Scope: 
1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. 
2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste. 
3. Community & Sea Port & Station: Municipal Solid Waste, etc. 
4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation 

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Cost of smart ash incinerator, cost to purchase a medical waste incinerator, cow creamator, cow cremator, creamation equipment for dogs and cats, cremating incinerator, Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.

Items Specification
YD Model YD-30 / YD-50 / YD-100 / YD-150 / YD-200 / YD-300 / YD-500 / YD-600
Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Incinerator Common Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)