Archive: November 28, 2022

русский

Установка для сжигания отходов модели YD300 на базе ООН в Сомали »

Nov 28, 2022 by hiclover 0 Comments #русский

Для лагеря ООН (ООН) и Африканского союза в международном аэропорту Могадишо. Мы доставляем 02 комплекта инсинератора модели YD-300 и отправляем их в контейнере высотой 1 × 40 футов.

Инсинератор со скоростью горения 300 кг / час пользуется большой популярностью на рынке, потому что эта модель может быть оборудованием для сжигания медицинских отходов для больших больниц, а также очень хороша для обработки других твердых отходов с наименьшими затратами, даже если в камеру сгорания также можно кормить крупных животных. Объем первичной камеры сгорания составляет 2,4 м3, что достаточно для животных обычных размеров. Для транспортировки YD-300 может быть загружен в 40-футовый контейнер высотой 40 футов.

Модель Ярд-300
Скорость горения 300 кг / час
Емкость подачи 500 кг
Первичная камера сгорания 2400 литров
Вторичная камера сгорания 1200 литров
Камера сгорания смеси да
Камера дымового фильтра да
Режим подачи Руководство по эксплуатации
Напряжение 220В / 380В
Мощность 1,48 кВт
Тип топлива Дизельное топливо / природный газ / сжиженный нефтяной газ
Горелка Италия Оригинал
Расход масла (дизельное топливо) 26–48,1 кг / час
Потребление газа (природный газ) 16,1–48,8 м3 / час
Внутренние размеры 220 x 110 x 100 см (основная камера)
Внешние размеры 260 x 220 x 420 см (без дымохода)
Монитор температуры да
Емкость масляного бака (для жидкого топлива) 500 литров
Открытие двери 90 х 110 см
Длина дымохода 10.0 метров
Тип дымохода Нержавеющая сталь
Вес брутто оборудования 8300 кг
Технические характеристики эксплуатации
Температура в основной камере 800 ℃ –1000 ℃
Температура вторичной камеры 1000 ℃ -1200 ℃
Время проживания 2.0 сек.
Эффективность горения ＞ 98%
Отходы с более низкой теплотворной способностью 3000 ккал
waste

Pet Crematory

Nov 28, 2022 by hiclover 0 Comments #Waste Incinerators

Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, hospital incinerator china, hospital incinerators 50 kg/hr capacity manufacturer, hospital incinerators china, hospital insinerator, hospital medical waste incinerator manufacturers, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 
Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock. 
Application Scope: 
1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. 
2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste. 
3. Community & Sea Port & Station: Municipal Solid Waste, etc. 
4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs
Picture  
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
waste

install a diesel fired incinerator

Nov 28, 2022 by hiclover 0 Comments #wasteincinerators

incinerate mainly pharmaceuticals ( all types of dosage forms … syrups, tablets, injectables ) medical consummabables, and also biological fluids …
Capacity around 10 kg/ hour. install a diesel fired incinerator that can accommodate a batch load of up to 100 kg with a daily burning requirement of up to 500kg per 8 hour day. Industrial Incinerator to destroy
the pharmaceuticals waste like Alu, PVC,PVDC etc.Installation for burning of animal waste cost, presence, repayment terms where it is possible to buy in Russia? I am looking to for capacity between 200 -400kg
1.2FIELD PAINTING
Perform painting required for surfaces not otherwise specified, and finish painting of items only primed at the factory

1.3FIELD TRAINING
a. Submit [Six] complete copies of operating instructions outlining the step-by-step procedures required for system startup, operation and shutdown. Include in instructions the manufacturer’s name, model number, service manual, parts list, and brief description of all equipment and their basic operating features. And [Six] complete copies of maintenance instructions listing routine maintenance procedures, possible breakdowns and repairs, troubleshooting guides, and simplified schematic diagrams for the system as installed.

3.6.Performance
Preheat the incinerator for 4 hours to reach the firing temperature of 982degrees C [1800] degrees F. Weigh and record the total charge weight. Charge the incinerator at the rated burning capacity in kg pounds per hour for a period of [4] hours and operate in accordance with the manufacturer’s written instructions. Include in performance testing the operation of the mechanical charging facilities, the incinerator, the air pollution control equipment, the ash
handling equipment, and the operation monitoring facilities. Perform testing full scale for a full- operation cycle, and monitor performance to verify compliance with the contract requirements submit a report on monitoring results. Reduce the waste to a fine ash residue. Follow normal burnout procedure. After the incinerator has cooled, weigh the residue. The weight of the residue shall not exceed 5.0 percent combustible material of the total charge weight.
After clean-out, the incinerator shall not show any evidence of deterioration, such as shagged or spilling refractory, warping of parts, and discolored exterior paint.

•Control
Test the incinerator under actual firing conditions. Verify with testing that all controls function within the maximum and minimum limits for temperature or timing. Simulate actual unsafe conditions such as high temperatures and flame failure by reducing the settings for the activation of limit and safety controls.

•Shell Temperature
Operate the incinerator under normal load conditions for not less than 6 hours. After 6 hours, temperature readings of the outer shell, taken at not less than 5 random locations, shall not exceed the temperature limitation of paragraph furnace construction.
– capacity: 300-400 kg/hour
– Fuel syetem: Dual fuel( both oil and gas)

waste

Stratégie de traitement des déchets médicaux au Soudan

Nov 27, 2022 by hiclover 0 Comments #Français

• Un taux de combustion de 25 à 30 kg / h.
• Se compose de deux chambres pour assurer une réduction significative des émissions et être capable de températures comprises entre 800 et 1000 ° C.
• L’incinérateur doit être de conception nécessitant peu d’entretien, être alimenté au diesel et ne pas nécessiter plus de 15 ampères 220-250 V d’alimentation. La consommation de KW par heure doit être indiquée.
(1) Quelles sont les principales différences entre les incinérateurs médicaux: YD-10C et TS10 (PLC)?
(2) Après la combustion, les déchets médicaux deviennent de la fumée? Sans odeur? Pas de pollution?
(3) Que devons-nous faire pour libérer la fumée? Préparez-vous un tuyau pour diriger la fumée vers l’usine à l’extérieur?
(4) Un guide d’opération pour référence, nous craignons qu’il soit difficile à utiliser?
• L’incinérateur doit également pouvoir fonctionner avec un générateur.
• L’incinérateur doit avoir une option de réservoir et ne doit pas utiliser plus de 12 L de carburant diesel par heure pour brûler 25 à 30 kg de déchets. Options d’incinération des déchets médicaux pour Kaboul, Afghanistan
• La conception doit être conçue pour minimiser les risques pour les opérateurs et avoir une séquence de démarrage simple pour minimiser la formation et les compétences des opérateurs
• Des réductions de déchets solides de l’ordre de 90 à 97% devraient être systématiquement réalisées.une station centrale de traitement thermique dans la ville de Khartoum (9 millions d’habitants) nous avons commencé avec deux unités d’autoclave qui traitent jusqu’à 18 tonnes par jour jusqu’à présent, et j’ai hâte d’ajouter une ou plusieurs usines d’incinération pour les déchets médicaux, pharmaceutiques et dangereux.

waste

Waste Incineration Treatment BURNING RATE : 100-150kgs per hour HICLOVER TS150

Nov 27, 2022 by hiclover 0 Comments #waste-incinerator

BURNING RATE: -100-150kgs per hour

MINIMUM OPERATING TEMPERATURE: 800-1000 oC ( PRIMARY COMBUSTION )

MAX OPERATING TEMPERATURE: 1000-1200 oC ( AFTER BURNER COMBUSTION )

SECONDARY BURNING CAPACITY: COMPULSORY

DENSITY INSULATION: 50 mm high

Refractory capacity: min 114mm

HEAVY DUTY REFRACTING LINING TO WITHSATND 17500C

AVEARGE BURN OUT TIME: MAXIMUM 3HRS

FUEL TYPE: FUEL OIL ( DIESEL )

FUEL CONSUMPTION IN LTRS/HR: average 14

RESIDNECY TIME IN SECONDARY CHAMBER: 2 STAGES

Items/Model

TS150(PLC)

Picture

Principle

Waste Incineration Treatment

Burn Rate

Average 100-150 kg/hour

Feed Capacity

Average 750kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Chamber Material

High Alumina Fire Brick Wall, 1750℃ Rate

Paint for outside face

800°C Rate

Combustion Chamber

1570L

Internal Dimensions

150x100x105cm

Secondary Chamber

750L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

210/230V 50/60Hz

Power

0.9Kw

Oil Consumption (Liter/hour)

Average 14(D.O)

Gas Consumption (m3/hour)

***

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

2000L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st.

800℃–-1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

8500kg

External Dimensions

300x160x280cm(without chimney)



HICLOVER – Medical Environmental 

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

waste

高效有隔板過濾器

Nov 27, 2022 by hiclover 0 Comments #hongkong

2019年05月13日 空氣過濾器 356 views


產品特性：

l   外框：木框、鍍鋅框、鋁合金框或不鏽鋼框

l   外框厚度：150，220，290MM等

l   濾料：超細玻璃纖維

l   最高溫度：80℃

l   最高濕度：99%

l   效率：99.99%@0.3um（H13）99.999%@0.3um（H14） 

產品應用：

l   主要應用於電子、生物製藥行業及醫院等需要高潔凈度的場合終端過濾系統 

初阻力-風量關係曲線圖

常用規格及性能參數

型  號

外形尺寸

過濾面積

(m2)

額定風量

(m3/h)

初始壓降

(Pa)

寬×高×深(mm)

標  准

高風量

標  准

高風量

F8

H10

H13

TH230

230×230×110

0.8

1.4

110

180

≤85

≤175

≤235

TH320

320×320×220

4.1

6.1

350

525

TH484/10

484×484×220

9.6

14.4

1000

1500

TH484/15

726×484×220

14.6

21.9

1500

2250

TH484/20

968×484×220

19.5

29.2

2000

3000

TH630/05

315×630×220

8.1

12.1

750

1200

TH630/10

630×630×220

16.5

24.7

1500

2250

TH630/15

945×630×220

24.9

37.3

2200

3300

TH630/20

1260×630×220

33.4

50.1

3000

4500

TH610/03

305×305×150

2.4

3.6

250

375

TH610/05

305×610×150

5.0

7.5

500

750

TH610/10

610×610×150

10.2

15.3

1000

1500

TH610/15

915×610×150

15.4

23.1

1500

2250

TH610/20

1220×610×150

20.6

30.9

2000

3000

TH610/05X

305×610×292

10.1

15.1

1000

1500

TH610/10X

610×610×292

20.9

31.3

2000

3000

1、若遇規格、結構變更，以本公司提供的最新數據為準

2、本公司接受非表上規格過濾器產品的訂貨

更多內容 網址: www.ecolead.cn 電話: 025-57138032

waste

Pet Crematory HICLOVER A600

Nov 27, 2022 by hiclover 0 Comments #waste-incinerator

Model

A600, crematorium manufacturers

Internal Dimensions

130 x 70 x 65cm

Suit for Animal

Cat – yes

Dog – yes

Pig – no

Cow – no

Main Product List

Primary Combustion Chamber

Secondary Combustion Chamber

Mix-Combustion Chamber

Smoke Filter Chamber

Incinerator Control Case

Chimney:5.0Meters

*(upgrade to Stainless Steel, free cost)

Italy oil/gas burner: 02 Components

dog cremation urns

Oil Tank (if oil fuel): 200Liters

Model

A600

Picture

 

Feed Capacity

Typical 30 kgs per feeding(Creature )

Burning Rate

Typical 15 kgs per hour(Creature )

Voltage

220V

Power

0.59Kw

Fuel

Natural Gas or Diesel oil or LPG Gas

Burner

Italy Burner

Feed Mode

Manual Feeding

Fuel consumption (Oil)

10.0-16.0 Kgs/Hour

Fuel consumption (Gas)

10.0-15.0m3/Hour

External Dimensions

175 x 100 x 180cm (main body)

Internal Dimensions

130 x 70 x 65cm(Primary Chamber)

Waste combustion chamber

600Liters

Article Combustion Chamber

200Liters

Oil Tank Capacity

200 Liters or More(Optional)

Door Opening

50 x 60cm

Chimney

5.0M or More(Optional)

Gross Weight

3300kgs

Chamber Material

Refractory Concrete

Max.

160,000Kcal/Hr.

Operation Technical Specifications

Solid Chamber temperature

8000C -10000C

Gas Chamber temperature 

Chamber Anti-Rate

10000C -12000C 

Residency time

14500C

2.0 Sec.

Burning efficiency

＞97%

Waste Lower Calorific Power

small incinerator for sale
HICLOVER – Medical Environmental 

3000Kcal

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.