January, 2022 - HICLOVER Incinerator

Двухкамерная установка для сжигания медицинских отходов

Jan 8, 2022 by hiclover 0 Comments #русский

Базовая информация.

Номер модели: температура печи для сжигания колосниковой решетки

Экспортные рынки: глобальный

описание продукта

Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитических инсинераторов – это основная обработка отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. В настоящее время мы поставляем различные серии в соответствии с требованиями местных клиентов и проектируем обновленную мусоросжигательную печь с использованием наших передовых технологий. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.

Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы. * по заказу
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 500 кг больших медицинских инсинераторов, крупномасштабных инсинераторов медицинских отходов, производителей биомедицинских стимуляторов в Китае, производителей биологических установок для сжигания медицинских отходов в Китае, в час, до 6 тонн в день.
* Плоскость управления ПЛК. * по заказу
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.

Область применения:
1. Больница и клиника: медицинские отходы, инфекционные отходы, перевязочные материалы, биологические отходы, медицина.
2. Бойня, больница для домашних животных и ферма: трупы животных, биоотходы.
3. Сообщество, морской порт и вокзал: твердые бытовые отходы и т. Д.
4. Лаборатории, удаленные районы, операции по оказанию помощи при стихийных бедствиях, кремация животных

Предметы / Модель	Ярд-30	Ярд-50	Ярд-100	Ярд-150
Скорость горения (кг / час)	30 кг / час.	50 кг / час.	100 кг / час.	150 кг / час.
Емкость подачи (кг)	60 кг	150 кг	200 кг	300 кг
Вес оборудования	2300 кг	4000 кг	4300 кг	7000 кг
Первичная камера (литры)	360	900	1200	1500
Вторичная камера (литры)	200	200	500	500
Внешние размеры (см)	145x90x175	200x160x230	220x180x360	240x170x380
Внутренние размеры (см)	100x60x60	120x90x85	130x100x90	150x100x96
Масляный бак (литры)	200	300	300	500
Дверной проем (см)	48 х 60	62 х 80	55 х 80	59 х 81
Дымоход (M)	5	5	10	10
Тип дымохода	Нержавеющая сталь	Нержавеющая сталь	Нержавеющая сталь	Нержавеющая сталь
Вторичная камера	ДА	ДА	ДА	ДА
Камера смешанного сгорания	ДА	ДА	ДА	ДА
Камера дымового фильтра	ДА	ДА	ДА	ДА
Горючее топливо	Нефтяной газ	Нефтяной газ	Нефтяной газ	Нефтяной газ
Время проживания	2.0 сек.	2.0 сек.	2.0 сек.	2.0 сек.
Контроль температуры	ДА	ДА	ДА	ДА

Связаться сейчас Тел: + 86-25-8461 0201

waste

Incinerador de doble cámara

Jan 8, 2022 by hiclover 0 Comments #Español

Información básica.

Fuentes de extracción: procesamiento de residuos sólidos

Métodos de procesamiento: combustión

Mercados de exportación: Global

Información adicional.

Marca registrada: Clover

Descripción del producto

Nanjing Clover Medical Technology Co., Ltd. es un fabricante líder de incineradores de desechos en China. Somos fabricantes locales y uno de los mayores exportadores de China. ¿Cuáles son los precios del incinerador para mascotas, qué significa 50 kg netos, dónde puedo comprar medicina de trébol, dónde puedo encontrar un quemador de cenizas inteligente, dónde puedo conseguir un incinerador barato, equipo técnico de incinerador pirolítico es el principal tratamiento de desechos en todo el mundo , para desechos médicos, cremación de animales de compañía y otros desechos sólidos. La capacidad de 10kgs / Hr. Hasta 600kgs / Hr., Hasta 10 toneladas por día.

Artículos / Modelo	TS10 (PLC)	TS20 (PLC)	TS30 (PLC)	TS50 (PLC)	TS100 (PLC)
Velocidad de combustión	10 kg / hora	20 kg / hora	30 kg / hora	50 kg / hora	100 kg / hora
Capacidad de alimentación	20 kg	40 kg	60kg	100 kg	200 kilogramos
Modo de control	SOCIEDAD ANÓNIMA	SOCIEDAD ANÓNIMA	SOCIEDAD ANÓNIMA	SOCIEDAD ANÓNIMA	SOCIEDAD ANÓNIMA
Cámara de combustión	100L	210L	330L	560L	1200L
Dimensiones internas	Los 50x50x40cm	Los 65x65x50cm	Los 75x75x60cm	El 100x80x70cm	El 120x100x100cm
Cámara secundaria	50L	110L	180L	280L	600L
Cámara de filtro de humo	sí	sí	sí	sí	sí
Modo de alimentación	Manual	Manual	Manual	Manual	Manual
Voltaje	220 V	220 V	220 V	220 V	220 V
Energía	0,5 Kw	0,5 Kw	0,5 Kw	0,7 kilovatios	0,7 kilovatios
Consumo de aceite (kg / hora)	5,4-12,6	7,8–16,3	10.2-20	12.1-24	14-28
Consumo de gas (m3 / hora)	6.2-11.4	8-15,7	9,8-20	9,9-26,1	10–32,2
Monitor de temperatura	sí	sí	sí	sí	sí
Protección de temperatura	sí	sí	sí	sí	sí
Tanque de aceite	100L	100L	100L	100L	200L
Puerta de alimentación	Los 30x30cm	Los 45x40cm	Los 55x50cm	Los 70x55cm	Los 80x60cm
Chimenea	3 metros	3 metros	5 metros	5 metros	10 metros
Tipo de chimenea	Acero inoxidable	Acero inoxidable	Acero inoxidable	Acero inoxidable	Acero inoxidable
1er. Temperatura de la cámara	800-1000 grados	800-1000 grados	800-1000 grados	800-1000 grados	800-1000 grados
2do. Temperatura de la cámara	1000-1200 grados	1000-1200 grados	1000-1200 grados	1000-1200 grados	1000-1200 grados
Tiempo de residencia	2,0 seg.	2,0 seg.	2,0 seg.	2,0 seg.	2,0 seg.
Peso bruto	1500 kg	2200 kg	3000 kg	4500kg	6000 kg
Dimensiones externas	El 140x90x120cm	El 160x110x130cm	El 175x120x140cm	Los 230x130x155cm	Los 260x150x180cm

русский

Портативный инсинератор

Jan 8, 2022 by hiclover 0 Comments #русский

Базовая информация.

Экспортные рынки: глобальный

Дополнительная информация.

Торговая марка: клевер.

описание продукта

Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитических инсинераторов – это основная обработка отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. В настоящее время мощность установки для сжигания отходов + 50 кг / час, установка для сжигания отходов китайских поставщиков, установка для сжигания отходов для масла, установка для сжигания отходов для домашних животных в США, газовая камера для сжигания отходов 380 В, 300 кг, мы поставляем различные серии для требований местных клиентов и проектируем обновленную установку для сжигания с нашими передовыми технологиями . Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.

Область применения:

Больница и клиника: медицинские отходы, хирургические отходы – шприц, инфузионный набор, повязка, биологические отходы, лекарства.
Бойня, больница для домашних животных и ферма: мертвые животные, биоотходы.
Сообщество и морской порт и станция: бытовые отходы и т. Д.
Лаборатории, Удаленные районы, Операции по оказанию помощи при стихийных бедствиях, Кремация животных

Предметы / Модель	TS10 (ПЛК)	TS20 (ПЛК)	TS30 (ПЛК)	TS50 (ПЛК)	TS100 (ПЛК)
Скорость сжигания	10 кг / час	20 кг / час	30 кг / час	50 кг / час	100 кг / час
Емкость подачи	20кг	40кг	60кг	100кг	200 кг
Режим управления	ПЛК	ПЛК	ПЛК	ПЛК	ПЛК
Камера сгорания	100л	210л	330 л	560 л	1200L
Внутренние размеры	50x50x40 см	65x65x50 см	75x75x60 см	100x80x70 см	120x100x100 см
Вторичная камера	50 л	110л	180л	280L	600 л
Камера дымового фильтра	да	да	да	да	да
Режим подачи	Руководство по эксплуатации	Руководство по эксплуатации	Руководство по эксплуатации	Руководство по эксплуатации	Руководство по эксплуатации
Напряжение	220В	220В	220В	220В	220В
Мощность	0,5 кВт	0,5 кВт	0,5 кВт	0,7 кВт	0,7 кВт
Расход масла (кг / час)	5,4–12,6	7,8–16,3	10,2–20	12.1–24	14–28
Расход газа (м3 / час)	6,2–11,4	8–15,7	9,8–20	9,9–26,1	10–32,2
Монитор температуры	да	да	да	да	да
Температурная защита	да	да	да	да	да
Масляный бак	100л	100л	100л	100л	200л
Дверца подачи	30×30 см	45×40см	55×50см	70×55см	80×60 см
Камин	3 метра	3 метра	5 метров	5 метров	10 метров
Тип дымохода	Нержавеющая сталь	Нержавеющая сталь	Нержавеющая сталь	Нержавеющая сталь	Нержавеющая сталь
Время проживания	2.0 сек.	2.0 сек.	2.0 сек.	2.0 сек.	2.0 сек.
Вес брутто	1500 кг	2200кг	3000кг	4500кг	6000кг
Внешние размеры	140x90x120 см	160x110x130 см	175x120x140 см	230x130x155 см	260x150x180 см

waste

Incinérateur biomédical

Jan 8, 2022 by hiclover 0 Comments #Français

Description du produit

Nanjing Clover Medical Technology Co., Ltd. est l’un des principaux fabricants d’incinérateurs de déchets en Chine. Nous sommes un fabricant local et l’un des plus grands exportateurs de Chine. L’équipement technique d’incinérateur pyrolytique est le principal traitement des déchets dans le monde entier, pour les déchets médicaux, l’incinération animale, la crémation des animaux domestiques et autres déchets solides. La capacité de 10 kg / h. Jusqu’à 500 kg / heure, jusqu’à 6 tonnes par jour. Actuellement, nous fournissons différentes séries pour les besoins des clients locaux et concevons un incinérateur mis à jour avec notre technologie de pointe. La conception mise à jour de notre gamme d’incinérateurs en fait l’un des plus rentables au monde.

L’incinérateur YDC est la dernière conception pour le traitement des déchets, l’incinérateur de laboratoire, la grande usine d’incinération au Royaume-Uni, l’incinérateur à grande échelle, les déchets médicaux d’incinérateur à grande échelle, les incinérateurs de faible capacité, le fabricant d’incinérateurs à faible coût, y compris les déchets médicaux, la crémation animale et d’autres déchets solides. Cet équipement de qualité structurelle pour les types de sites, comme les hôpitaux, les services environnementaux, les agences de crémation des animaux, etc. CLOVER Incinérateur fournit des modèles mis à jour avec une chambre de combustion double, une chambre de combustion mixte et une chambre de filtre à fumée avec des lignes réfractaires et la température de la chambre de combustion jusqu’à 1200 deg C.

Articles	spécification
Modèle YDC	YD-10C / YD-20C / YD-30C / YD-50C
Liste de produits principale	Chambre de combustion primaire
	Chambre de combustion secondaire
	Mélanger la chambre de combustion
	Chambre de filtre à fumée
	Cas de contrôle commun de l’incinérateur
	Cheminée en acier inoxydable
	Italie brûleur fioul / gaz: 02 unités
	Réservoir d’huile (si carburant d’huile)

Auto Roll Air Filters

Ecolead wrap-around air filter is popular, professional design attracts more users

Jan 8, 2022 by hiclover 0 Comments

May 18, 2019 company news 302 views

When it comes to winding filters, many customers are familiar with it. This equipment is mainly used for fresh air pre-filtration in sewage treatment plants and central ventilation systems. Because of its obvious advantages, the device is favored by users. Today, we invite senior product engineers from Ixio to share the unique features of the equipment. We hope that after the introduction, everyone will have more understanding to purchase this product.

l Unique technology: It has many advantages compared with the traditional primary filter. The technical principle adopted by the filter adds a lot of technical content, which is in line with the characteristics of modern equipment. Gradually replace human labor with automation. Adopt the filter medium to absorb the solid, liquid and gaseous components that need to be filtered, the filtering effect is obvious, the particle size is 8um, and the filtering efficiency is ≥95% ;

l High working efficiency: The equipment uses patented technology and the method of air turbulence reverse cleaning, so that there is no clogging problem due to the viscosity of the filter material, and there is no need to use chemicals for cleaning. Through the PLC automatic control program, from the end of the installation of the equipment to the exhaustion of the entire roll of filter material, there is no need for any personnel to participate. The filter material is automatically replaced when the preset value is reached. If the motor fails, it will automatically alarm, and there will be a voice switch when the filter material is exhausted. Notify personnel to replace a new roll of filter material, and the reserved signal interface can also monitor the on-site operation in the main control room. Work process monitoring is much simpler, PLC is accurate and reliable, and the failure rate is low. It is a good application to replace plate air filters.

l High quality: The quality of any equipment is directly related to the service life of the equipment. The quality of the winding filter is quite reliable. From the selection of raw materials to the production and processing, each link has a special quality inspector. Only when the standard is reached It will be on the market, so the quality of this equipment is quite reliable. If it is used normally and correctly, it can reach more than ten years, which greatly extends the service life, reduces the number of subsequent maintenance, and reduces the maintenance cost.

l Simple and convenient operation: Although the wound air filter is a kind of high-tech equipment, the operation method of this equipment is very simple. Even users who use it for the first time can easily use the PLC provided by our company after being familiar with it several times. The control panel performs various technical confirmations and parameter adjustments. The remaining unrolled times of the filter material and the relevant parameters for replacing the filter material in the future can be queried on the control screen. Combining with the product manual provided by Ecolead can easily get to the core of technical operation, easy operation and maintenance.

l Reasonable price: Although the advantages of so many winding filters have been analyzed, if the initial investment is too high and customers cannot accept the price, Ecolead winding filters will not be able to open the market and achieve good results. Our company’s price positioning is very reasonable, with high quality and low price. It has truly achieved a cost-effective effect, which is acceptable to most users, and it has really helped users solve many problems.

The above is a brief introduction to the winding filter. The unique characteristics of this equipment, I believe that through the above analysis, it will be helpful to everyone. If users need to purchase Ecolead wound air filters, please feel free to contact our sales staff. Our company has reached long-term strategic cooperation with many water companies, environmental protection engineering companies, blower manufacturers, and air-conditioning manufacturers. We look forward to your call.

Basic Info.

Model NO.:incinerator burner model for cremation croupes

Pullution Sources:Solid Waste Processing

Processing Methods:Combustion

Export Markets:Global

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, clover medical equipment incinerator, clover medical incinerator, clover medical limite, clover medical limited, clover medical limited arabia saudi, clover medical limited is a leading waste incinerator manufacturer, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.
Key Features:
* All models with Dual combustion chamber.
* Stainless Steel chimney/stack, long lifetime. *according to order
* High temperature, long lifetime of incinerator.
* Free or minimum installation on site.
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day.
* PLC Control Plane. *according to order
* New Design for pet animal cremation business.
* One year warranty on incinerator and parts in stock.

Items	Specification
YD Model	YD-30 / YD-50 / YD-100 / YD-150 / YD-200 / YD-300 / YD-500 / YD-600
Main Product List	Primary Combustion Chamber
	Secondary Combustion Chamber
	Mix Combustion Chamber
	Smoke Filter Chamber
	Incinerator Common Control Case
	Stainless Steel Chimney
	Italy oil/gas burner: 02 units
	Oil Tank (if oil fuel)

waste

TECHNICAL INCINERATORS REQUIREMENTS FOR Two health centers in Kenya

Jan 8, 2022 by hiclover 0 Comments #waste-incinerator

All the incinerators to be supplied and installed must meet the Government of Kenya waste Management Regulation 2006 in particular 3^rdschedule regulation (26, 47) pertaining classification, standards, criteria, and procedure for installing/operating incinerators as authored by the National Environmental Management and Coordination (waste management) regulation 2006, legal notice No. 121 of 29^th September 2006
The capacity of the incinerator required should be to the specifications with a capacity to burn 100kgs/Hr
The incinerator shall be run on a 3-phase power supply (mains)
For the technical evaluation, not only the treatment plant but the entire system will be considered. It will be the responsibility of the Bidder to supply a full system, including all eventually additionally necessary secondary systems and additional equipment.
The system offered shall be designed to operate normally under the conditions of the purchaser’s country. The conditions include Power Supply, Climate, Temperature, Humidity, etc.
The Bidder must provide a warranty for one year.
All text, parameter etc. on all control operating interfaces as well as on information displays and on print-outs shall be in English language.
The Bidder is responsible for all permits and approvals for importation. The Bidder shall provide all the necessary documentation in order to facilitate the legal requirements for the installation and putting into use of the equipment.
Period of Execution is 90 days from contract signature for delivery to site and completion of all verification operations required for the issuance of provisional acceptance.
Representatives of the Contracting Authority and the Beneficiary, together with the Bidder’s representative, shall carry out the controls, testing and initial approval for provisional and final acceptance as. The provisional and final acceptance shall take place at the final destination.
After-Sales Service: The Bidder is required to ensure that a maintenance, service and repair centre, which is authorised by the Manufacturer, and which is able to rapidly supply genuine spare parts and consumables recommended by the Manufacturer is available throughout the one year warranty period. In fulfillment of this requirement with their offer Bidders must submit a statement signed by a representative of the manufacturer:
- Providing the name and address of its authorised maintenance, service and repair centre,
- Confirming that this authorised maintenance, service and repair centre is able to rapidly supply genuine spare parts and the consumables recommended by the Manufacturer; and

The Bidder will be responsible to deliver and install all to be supplied equipment at to be set up waste handling areas in the Republic of Kenya. The Bidder shall deliver a time schedule over the complete construction and assembling period. The delivery and installation time must be agreed between bidders, target Hospital and the Contracting Authority. The treatment plant must arrive pre-assembled. The Bidder shall ensure that all parts of the plant transported by sea shall not be shipped as “deck cargo”.

It is expected that the Bidder cooperates closely with the contractor for the new waste handling building/area and will make available all needed technical information, drawing, etc. to the contractor.

The Bidder shall supply and install the incinerator with the following attached specifications


TECHNICAL INCINERATORS SPECIFICATIONS FOR EAPHLNP

ITEM	DESCRIPTION	UNIT	QTY	RATE	KSHS.

	Incinerator
	To supply and install the following		2NO.
	Hospital Incinerators to Nema standards
	The following are the incinerator specifications :-
A	Ø Waste type: Mixed type 0,1,2,3 & 4 hospital/clinical bio hazard waste
	Ø Waste density: 125 to 350Kg/M³
	Ø Waste CV: 4000 KCAL/Kg
	Ø Moisture content: 10-25%
	Ø Estimated ash residue: 5-10%
	Ø Nominal capacity: 100Kg/hour batch load
	Ø Secondary chamber: 2 second @ 1100ºC
	Ø Environmental: NEMA ACT (EMCA) 1999
	Clean Air Act 1999
	BS3316 1987
	Equipment	Set
	The Incinerator must comprise of: –
	Ø Manual Loading door (heavy duty steel door with appropriate refractory lining)
	Ø Horizontal solid hearth, refractory lined primary combustion chamber 800mm diameter x 2100mm long
	Ø Full sized bulk load/ash removal door
	Ø 1 off diesel-fired ignition burner – temperature controlled
	Ø 1 off combustion air supply fan and distribution system, automatic control
	Ø High capacity secondary combustion chamber 2 second @ 1100ºC with
	Ø 1 off diesel-fired afterburner – temperature controlled
	Ø Control Panel – automatic operation
	Ø Temperature indication primary and secondary chambers 0-1200ºC. Both chambers must be insulated with refractory material (super duty 100mm thick firebrick with 25mm thick calcium silicate insulation)
	Ø Refractory lined flanged chimney to a height of 10M and it must be 3m above the height of any existing roof adjacent to the incinerator
	Carried Forward To Collection Page.
	NOTE: WE REQUIRE TWO INCINERATORS. ONE
ITEM	DESCRIPTION	UNIT	QTY	RATE	KSHS.
B	Diesel Tank:
	To provide for diesel service tank (Capacity 400 litres) including level indicator NO	Item	1
C	Installation & commissioning works
D	Positioning of Incinerator: – 1	Item	1
E	Connect burners to fuel supply.	No.	2
F	Chimney Installation:
G	Composition of the chimney: – NO 1 Hallmark of tenderer	Item.	1
H	Commissioning & Training:
	Testing set operating parameters, training of operators and technical staff.	Item	1
I	Commissioning Maintenance Contract
	Before the expiry of the warranty/signing off, the suppler shall provide a one-year replacement service parts (e.g. filters, air filters), the Quarterly routine maintenance price per quarter for three (3) quarters. Maintenance contract proposal). The maintenance contract price includes labour, transport and accommodation for the attending technicians.	Item	3

Note: In situation of variance in between system price and total quantity, the device cost will control.

AREA VI – – – – CONVENTIONAL FORMS

TECHNICAL INCINERATORS SPECS FOR 2 clinical facilities

INTRODUCTORY

The container need to be affixed to the incinerator in a greater level to make it possible for free-flow of petrol from the storage tank to the burner.

EXAM CRITERIA

Analysis will be implemented in 4 phases specifically preliminary examination of files for uniformity with required requirements, technical evaluation, site check out and likewise industrial examination.

ITEM	DESCRIPTION	UNIT	QTY	MARKS ALLOCATED	MARKS RECEIVED

	Incinerator
	To supply and install the following		2NO.
	Hospital Incinerator to Nema standards
	The following are the incinerator specifications :-

A	Ø Waste type: Mixed type 0,1,2,3 & 4 hospital/clinical bio hazard waste			35
	Ø Waste density: 125 to 350Kg/M³
	Ø Waste CV: 4000 KCAL/Kg
	Ø Moisture content: 10-25%
	Ø Estimated ash residue: 5-10%
	Ø Nominal capacity: 100Kg/hour batch load
	Ø Secondary chamber: 2 second @ 1100ºC
	Ø Environmental: NEMA ACT (EMCA) 1999
	Clean Air Act 1999
	BS3316 1987
	Equipment	Set
	The Incinerator must comprise of: –
	Ø Manual Loading door (heavy duty steel door with appropriate refractory lining)
	Ø Horizontal solid hearth, refractory lined primary combustion chamber 800mm diameter x 2100mm long
	Ø Full sized bulk load/ash removal door
	Ø 1 off diesel-fired ignition burner – temperature controlled
	Ø 1 off combustion air supply fan and distribution system, automatic control
	Ø High capacity secondary combustion chamber 2 second @ 1100ºC with
	Ø 1 off diesel-fired afterburner – temperature controlled
	Ø Control Panel – automatic operation
	Ø Temperature indication primary and secondary chambers 0-1200ºC. Both chambers must be insulated with refractory material (super duty 100mm thick firebrick with 25mm thick calcium silicate insulation)
	Ø Refractory lined flanged chimney to a height of 10M and it must be 3m above the height of any existing roof adjacent to the incinerator

ITEM	DESCRIPTION	UNIT	QTY	RATE	KSHS.
B	Diesel Tank:
	To provide for diesel service tank (Capacity 400 litres) including level indicator 100	Item	1	20
C	Installation & commissioning works
D	Positioning of Incinerator: – Pass mark for technological evaluation is 70/100 marks	Item	1	10
E	Connect burners to fuel supply.	No.	2	5
F	Chimney Installation:
G	Composition of the chimney: – Phase 3: Web Site Browse Through The evaluation board will inspect out the properties of the prospective buyers that are responsive to technical evaluation phase to validate the credibility of lawful data sent outside; develop the accuracy of the details provided in the tender documents, analyze company’s ability, location, to call a few. Phase 4 Business Analysis	Item.	1	10
H	Commissioning & Training:
	Testing set operating parameters, training of operators and technical staff.	Item	1	10
I	Commissioning Maintenance Contract
	Before the expiry of the warranty/signing off, the suppler shall provide a one-year replacement service parts (e.g. filters, air filters), the Quarterly routine maintenance price per quarter for three (3) quarters. Maintenance contract proposal). The maintenance contract price includes labour, transport and accommodation for the attending technicians.	Item	3	10
	TOTAL			Quotes that pass the above 3 (3) phases will be contrasted on the basis of prices/ price approximated and the cheapest valued will definitely be taken into factor to think about the cheapest analyzed proposal in addition to additionally consequently suggested for honour.

Trademark of tenderer

Note: In the event of inconsistency in between system cost and total amount, the unit rate will predominate.

TECHNICAL INCINERATORS SPECS FOR 2 medical facilities

ITEM

INTRO

ITEM DESCRIPTION

UNIT

QTY. REQUIRED

UNIT PRICE (KHS)

REMARKS

Supply, Delivery, installation and commissioning of Incinerator in

The tank requirement to be attached to the burner in a better level to make it possible for free-flow of petrol from the storage area tank to the burner.

EVALUATION STANDARD

Supply, Delivery, installation and commissioning of Incinerator

Evaluation will surely be done in 4 phases particularly first assessment of documents for uniformity with obligatory demands, technical evaluation, website check out and additionally commercial exam.

100

Pass mark for technical evaluation is 70/100 marks

Stage 3: Internet Website Browse With

The evaluation committee will surely check out the properties of the prospective purchasers that are receptive to technical analysis stage to validate the credibility of legal documents sent out; establish the validity of the information offered in the tender documents, analyze company ’s capacity, area, to call a few.|

Form of tender
Contract form
Confidential Questionnaire form
Tender security form
Performance security form
Bank guarantee for advance payment
Declaration form

waste

50 Kgs Per Hour Incinerator

Jan 8, 2022 by hiclover 0 Comments #Blog

Basic Info.

Pullution Sources:Solid Waste Processing

Processing Methods:Combustion

Export Markets:Global

Additional Info.

Trademark:Clover Incinerator

Product Description

Nanjing Clover Medical Technology Co., Ltd., local in Nanjing city, China. CLOVER is manufacturer of medical product, waste incinerator and other environmental protection equipment. The market network across over the territory of China and more than 30 countries throughout the world.
YDC incinerator is latest design for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, filter smoke for incinerators, fired brick manufacturer, flue fead incinerator, food incinerator, for sale small incinerator, free burning incinerator manufacturers china, like hospital, environmental department, animal cremation agencies, etc. CLOVER Incinerator supply updated models with dual combustion chamber, mix combustion chamber and smoke filter chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.

Items	Specification
YDC Model	YD-10C / YD-20C / YD-30C / YD-50C
Main Product List	Primary Combustion Chamber
	Secondary Combustion Chamber
	Mix Combustion Chamber
	Smoke Filter Chamber
	Incinerator Common Control Case
	Stainless Steel Chimney
	Italy oil/gas burner: 02 units
	Oil Tank (if oil fuel)

waste

تعمل بالديزل ، السعة: 50 كجم نفايات في الساعة

Jan 7, 2022 by hiclover 0 Comments #português

معلومات أساسية.

نموذج رقم: ترميد إدارة النفايات الخطرة في إيطاليا

أسواق التصدير: عالمية

وصف المنتج

دلائل الميزات:
* جميع الموديلات بغرفة احتراق مزدوجة.
* مدخنة / كومة من الفولاذ المقاوم للصدأ ، عمر طويل. * حسب الطلب
* ارتفاع درجة الحرارة ، وعمر طويل من المحرقة.
* تثبيت مجاني أو بحد أدنى في الموقع.
* معدل حرق مرتفع ، من 10 كجم إلى 500 كجم في الساعة ، حتى 6 طن في اليوم.
* طائرة التحكم PLC. * حسب الطلب
* تصميم جديد لأعمال حرق جثث الحيوانات الأليفة.
* ضمان لمدة سنة على المحرقة والأجزاء الموجودة في المخازن.

مجال التقديم:
1. المستشفى والعيادة: نفايات إيتريك ، نفايات معدية ، ضماد ، نفايات حيوية ، دواء.
2.مذبح ومستشفى ومزرعة بيت الحيوانات الأليفة: محارق البرسيم ، ترميد الكوكايين ، محرقة الكوكايين ، موقد غرفة الاحتراق ،
3. المجتمع والميناء والمحطة: النفايات البلدية الصلبة ، إلخ.
4. المختبرات ، المواقع النائية ، عمليات الإغاثة من الكوارث ، حرق جثث الحيوانات
5. غرفة الاحتراق لمحطة توليد الطاقة الغازية ، وغرفة احتراق الحيوانات ، والحيوان الميت ، والنفايات الحيوية.

العناصر	تخصيص
نموذج YD	YD-30 / YD-50 / YD-100 / YD-150 / YD-200 / YD-300 / YD-500 / YD-600
قائمة المنتجات الرئيسية	غرفة الاحتراق الأولية
	غرفة الاحتراق الثانوية
	مزيج غرفة الاحتراق
	غرفة مرشح الدخان
	حالة التحكم في المحرقة المشتركة
	مدخنة ستانلس ستيل
	موقد الزيت / الغاز في إيطاليا: 02 وحدة
	خزان الزيت (إذا كان زيت الوقود)

اتصل الآن هاتف: + 86-25-8461 0201

waste

Capacity Small Scale Incinerators

Jan 7, 2022 by hiclover 0 Comments #wasteincinerators

Product Description

Key Features:
* All models with Dual combustion chamber.
* Stainless Steel chimney/stack, long lifetime. *according to order
* High temperature, long lifetime of incinerator.
* Free or minimum installation on site.
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day.
* PLC Control Plane. *according to order
* New Design for pet animal cremation business.
* One year warranty on incinerator and parts in stock.

Application Scope:
1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine.
2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste.
3. Community & Sea Port & Station: Municipal Solid Waste, etc.
4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)	TS100(PLC)
Burn Rate	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour	100 kg/hour
Feed Capacity	20kg	40kg	60kg	100kg	200 kg
Control Mode	PLC	PLC	PLC	PLC	PLC
Combustion Chamber	100L	210L	330L	560L	1200L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm	120x100x100cm
Secondary Chamber	50L	110L	180L	280L	600L
Smoke Filter Chamber	Yes	Yes	Yes	Yes	Yes
Feed Mode	Manual	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V	220V
Power	0.5Kw	0.5Kw	0.5Kw	0.7Kw	0.7Kw
Oil Consumption (kg/hour)	5.4–12.6	7.8–16.3	10.2–20	12.1–24	14–28
Gas Consumption (m3/hour)	6.2–11.4	8–15.7	9.8–20	9.9–26.1	10–32.2
Temperature Monitor	Yes	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes	Yes
Oil Tank	100L	100L	100L	100L	200L
Feed Door	30x30cm	45x40cm	55x50cm	70x55cm	80x60cm
Chimney	3Meter	3Meter	5Meter	5Meter	10Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	1500kg	2200kg	3000kg	4500kg	6000kg
External Dimensions	140x90x120cm	160x110x130cm	175x120x140cm	230x130x155cm	260x150x180cm

Archive: January 8, 2022

Базовая информация.

описание продукта

Información básica.

Información adicional.

Descripción del producto

Базовая информация.

Дополнительная информация.

описание продукта

Description du produit

More content URL: www.ecolead.cn Tel: 025-57138032

Basic Info.

Product Description

Basic Info.

Additional Info.

Product Description

معلومات أساسية.

وصف المنتج

Product Description