Archive: July 2, 2021

Ecolea d nylon mesh filter

Product Features:

l    Outer frame: galvanized frame, aluminum alloy frame

l    Frame thickness: 10, 15, 21, 25, 46, 96MM, etc.

l    Filter material: Polyamide monofilament fiber woven filter material, good abrasion resistance, high strength and long service life

l    Maximum temperature: above 80℃

l    Maximum humidity: 99%

l    Efficiency: G2, G3 (EN779)

Applications:

l    Coarse filtration of air conditioning in general buildings

l    Primary filtration of industrial air ventilation equipment

l    Primary Filtration in Centralized Ventilation and Air Conditioning System of Clean Room

Initial resistance-air volume relationship curve

Common specifications and performance parameters

1. In case of specification and structure changes, the latest data provided by our company shall prevail

2. The company accepts orders for non-listed filter products

In many workshops, in order to ensure the cleanliness of the workshop, some workshops will install an air bath or air shower room near the door of the workshop to ensure that every worker who enters the workshop will not bring it with you. Into the dust. But in the process of operating the air bath dust room , what problems need to be paid attention to? The following will give you an introduction:

The door of the entrance cannot be opened at the same time. If there is air blowing out, before stopping, prevent the door on the side of the dust bath from opening. When entering the dust-bath room, you must enter according to the maximum occupancy of the air-bath room . When you come out, there will be no more than 10 people.

In the air-bath room , you need to stand according to the specified position, and when the air is bathed, you also need to rotate your body and slap your body without sinking, so that the dust can be better blown off. It is necessary to step on the foot pads with your feet many times, which is also very beneficial for removing dust and foreign objects from the soles. When each worker enters the workshop to work, he needs to clean the dust on his body in the air bath dust room , so as not to bring external dust into the workshop and pollute the environment in the workshop, which is not conducive to working in the workshop. Come to work.

Before the worker enters the workshop, the dust-free clothing is not allowed to touch the walls, floors and other places. It is also impossible to touch the air outlet. During installation, it is necessary to confirm it regularly, and it is also necessary to record whether the position of the air outlet is correct. As for the filter of the return air outlet, the best replacement frequency should be controlled at one season/time. Once damaged or dirty, it needs to be replaced immediately. At the same time, when replacing, you need to notify the factory to deal with it, and record it in the inspection table of the dust bath room.

It seems that when operating the air bath dust room , there are indeed many points in this operation that need to be paid attention to. If you don’t pay attention to it, some problems may occur during use. The correct use of the dust-bathroom will have a very negative impact.