Tag: wasteincinerators

pet cremation incinerators

The successful bidder shall deliver the incinerator skid in a container. The container will be emptied by CEB and

returned to the successful bidder / or to its shipping agent. A containerized solution is also acceptable.

• Electrically operated 220 volt ( 60 Cycle – 1 phaze )
• Able to complete burning material that turns to ashes all the component elements of the carbon or metal in the

incinerator with a closed air environment ,  <98%

• Incinerator must maintain the high temperature in the combustion chamber to ensure complete combustion of the

waste , but not to the degree that leads to the formation of a cluster similar to those resulting

2.9  Interfacing with existing Sludge System

– Incineration of industrial wastes, including pesticides and PCBs;

– Ability to incineration 300-500 kg / hour.

– Complete unit with gas washing system.

The incinerator will be connected to the existing sludge handling system. The incinerator sludge tank will be filled

with sludge by means of a sludge circulating pump on the existing system. The sludge tank shall be equipped with

control valves that will open and close according to the level in the sludge tank.

For the DO tank, its filling line will be connected to the nearest DO supply piping. The DO tank shall be equipped with

a control valve for automatic filling of the tank and level switches that will trigger automatic opening / closing.

2.10       Supervision of Installation, Testing & Commissioning

The successful bidder shall also supply its rates for the supervision of installation and testing and commissioning of

the incinerator set. The rates shall not include accommodation charges. The following shall be covered under the

supervision of installation, testing and commissioning charges;

incineration combustion chamber

Supervision of installation of the new incinerator set shall be provided by the successful Bidder while labour

and heavy duty equipment shall be provided by CEB.

?     The successful Bidder shall submit to CEB, prior to shipment of the incinerator set, its procedures for the

installation of the incinerator and exhaust chimney. This should include all mechanical, civil and electrical drawings

and detailed methodology for successful installation of the incinerator set. It shall also include preliminary tests

that have to be carried on the incinerator unit. .

?     The successful Bidder shall provide all necessary test equipment ( test kit for emission measurements) for

carrying out of tests during testing & commissioning of  the incinerator set. . The successful Bidder shall be

responsible for the satisfactory completion of all tests and remedial action in case of any anomaly. Corrective action

by the successful bidder shall be prompt and to the satisfaction of the CEB Engineer.

?     Scheduled date for commencement of supervision of installation, testing & commissioning works shall be mutually

agreed between the successful Bidder and CEB

1 Burning Capacity 200 kg/hr

2 Chamber Dual

3 Fuel Source type Gas

4 Optional fuel source Diesel ( Rate to be quoted separately)

5 Temperature ? Range:

Min: 900

Max: 1500

Must have

? Temperature Monitoring/ Thermostat Control/

Constant Run Fan

Hospital waste incinerator

Capacity: 50 Kg / Hour

Brand new complete working

Burners: Diesel (Preferably dual gas / diesel)

Primary and secondary chamber

Environment friendly

Manual loading and unloading

WASTE INCINERATOR

–          150 KG/HR

–          Compliant with EU rules, Directive 2000/76/EC

–          Fuel type: Diesel

–          Easy management and maintenance

–          Temperatures:

850 deg C for municipal waste

1000 deg C for medical waste

1100 deg C for dangerous waste containing halogenated organic substances with content of chlorine or its compounds.

smart ash incinerator price

Flue Gas Cleaning

System

? Wet Scrubber

? Electrostatic precipitation in combination ( Optional: Rate to be

quoted separately)

7 Chimney Height 10m (minimum)

?     Total duration of the supervision of installation, testing and commissioning works shall not exceed 2 weeks.

2.11       Commissioning

Commissioning  tests  to  be  carried  on  site  shall  include  but  not  limited  to  the following.

?     Capacity test with respect to guaranteed particulars

?     Emission test with respect to limits set in annex 1. Note that bidder shall provide its own test kit for

carrying out the emission tests.

?     Flame safeguard. The operation of the flame safeguard system should be verified by causing flame and  ignition

failures.  Operation of  the audible alarm (where applicable) and visible indicator should be verified. The shutdown

times should be verified.

?     Testing of all shutdowns to the system.

?     All interlocks provided should be tested for proper operation as specified by the unit manufacturer.

?     Combustion controls. The combustion controls should be stable and operate

– For some applications requiring rotary kiln incinerators but narrow;

– For hospital; incinerators requiring fuel as LPG, diesel or heavy fuel oil: This market segment, my company have been

had group customers to supply the equipment for more 5 years.

– Especially, the incinerator – model series (No auxiliary fuel is required): Those products are feasible to sales

hundreds and thousand over the Vietnamese market in case of your products owned the optimal technical specifications

and reasonable price. Those products are beginning and suitable solution for combusting solid waste in Vietnamese

market which I have already market research and testing.

laboratory incinerator china manufacturer

Incinerator dual chamber with capacity 1.5 m3/batch or 6 m3/ day, digital thermocontrol range 0‐1200

C, thermocouple, air supply capacity 10m3/ minute, power consumption 1.2kWH/ hour, power 3

phase with netral, cooling water sprinkler capacity 5L/ minute, completed with refractory (insulation,

castable, ceramic blanket) and PLC

SUPPLY, INSTALLATION AND COMMISSIONING OF WASTE INCINERATOR – TECHNICAL SPECIFICATIONS

The Waste Incinerator is designed to burn Type IV of pathological waste and infectious, contaminated “red bag,” surgical

dressings, plastic test devices and other wastes.
General Specifications
Burner:  2 burners (primary burner and second burner)
Fuel: Oil
Capacity (Cubic Mtr): 0.65
Ave Capacity: 60 kg per hour
Fuel Consumption (ltrs / hr):13
External Dimensions
Length (mm): 2300
Width (mm): 1220
Height Incl. Flue (mm) 7000
Door Opening (mm) 610 x 710 610 x 710
Operation
Min. Operating Temperature: 950
Max. Operating Temperature: 1320
Residency Time in Second Chamber: 5 sec
Temperature Monitoring: YES
Other clarification
Easy and safe operation
Large counter-balanced fill door with electrical    lockout.
Automatic control system provides preset burn times and shut off.
Reload light indicates to operator when it is time to recharge.
Be required for burnout of final charge.
Low energy consumption levels
Programmable digital temperature controls maintain temperature, assuring complete combustion while conserving fuel.
 Pressure blower with modulating air control creates turbulence and distributes combustion air to secondary chamber.
 Secondary burner with temperature activated modulating control provides fast preheat and   sustains high temperature

performance at low energy consumption levels.
Charging rate

animal incinerators china

Incinerate: medical waste and general waste Capacity to burn waste:

400-500kg/hr

Fuel: Diesel

Fuel Consumption: 10 liters/hr maximum

Incineration temperature: 950-1300 degrees centigrade

Casing: thick (min 5mm) stainless steel casing and fully insulated to

withstand sea humidity Voltage 220/240v or 380/415V Frequency 50Hz

Feeding: Automatic

Ash/leftovers removal: Automatic

Flue gas filtration system: Yes

Thus, please send me the full, detail technical & marketing documents and price list emphasis on the incinerators

portfolio and especially the no fuel incinerator with all detail things you have (All documents you sent me too short

cut and there is not any marketing color documents which pushed on my company’ marketing documents to offset print

early next week as planned).

animal crematorium equipment

I also research their product details and find it don’t require fuel and also not require fan

blower but that incinerator can only burn waste with 30%-40% humid. I see if your products can burn waste with 30%-40%

humid without fan blower and more 40% humid require fan (Optional solution) which lead us to kick them out.

I don’t have yet precise information on the project opportunities. I have met with the Environment Minister in

Algeria, among others, and they are presently in the process of preparing bid documents for different installations for

waste incineration for several Cities in Algeria. I have indicated to the Minister and his subordinates that I will

identify key partners interested to bid on these upcoming calls for tenders. The Minister will send me preliminary

documents for these upcoming bids so that I may comment them and make necessary recommendations to optimize bid

results. We are talking here of large projects requiring a capacity of 1 000 tons per day and above of wastes and the

production of electricity.

Concerning Medical Waste

large scale incinerator

Programming controls. Programming controls should be verified as controlling and cycling the unit in the

intended manner. Proper prepurge, ignition, postpurge, and modulation should be verified. A stopwatch should be used

for verifying intervals of time.

?     Fuel supply controls. The satisfactory operation of the fuel control solenoid valves for all conditions of

operation and shutdown should be verified.

?     Low voltage test. A low voltage test should be conducted on the incinerator unit to satisfactorily demonstrate

that the fuel supply to the burners will be automatically shut off before an incinerator malfunction results from the

reduced voltage.

?     Switches. All switches should be tested to verify proper operation.

high-capacity, powerful, European Standard incinerator,ideal for high volume incineration,with integral after-burner

for greater efficiency and emissions control.

Waste Type and Burn Rate

Designed specifically for use by poultry farmers,

sheep farm owners,   abbatoirs and for pet

cremation. The incinerator will burn up to 50kg of

waste per hour (up to 150kg burn

Construction

Mild steel welded fabrication consisting of sheet steel

and structural section supports.

Lining

Monolithic high grade refractory concrete with high grade insulation backing.

Burners

Fully automatic, high-efficiency burners with electronic ignition, flame recognition and combustion control devices

fitted.

Loading – Ash removal

Manual ash removal from the primary chamber. (Ash doors are available on request).

Exterior finish

Multi-coat high quality, high-temperature aluminium enamel top coat paint, finished in silver.

Control

incinerator burners

Fully automatic sequential control provided by internal

PLC system providing control of:

1. Secondary chamber pre-heat
2. Burn cycle (variable)
3. Cool down cycle

Fuel Options

Diesel, LPG, Natural or Bio Gas.

Typical Fuel Consumption

Diesel: 8 / 10 litres per hour

Liquid Propane Gas: 6 / 8 litres per hour

Natural Gas: 7 / 9 Nm3 per hour

Electrical supply

240volt 16 amp.

Key Specifications

Chamber Volume 2.38m3:

2.2m (l) x 0.9m(w) x 1.2m(h)

Load Capacity up to 1000kg

Load Method Top

Medical Waste Incinerator will be quoted in accordance with Technical Specifications provided below:

1) A self-contained, diesel fuel, medical waste incinerator with a minimum burn rate capacity of 100 kg/day.

2) A medical waste incinerator shall be specifically designed by the manufacturer to dispose of all Bio-Hazard medical

wastes.

3) At a minimum the unit shall be sized to incinerate 2.0 kg/exam-room/24-hrs when being operated continuously for 12

hours per day, but no less than 100kg/day total.

4) The Incinerator shall be manually batch fed.

hospital incinerator manufacturers

The incinerator fuel tank shall meet the following requirements:

1. a) The tank shall be installed above ground and according to all of the fuel tank requirements in Section 1015

including secondary containment.

1. b) The tank shall be sized to hold a 14 day supply of diesel fuel

6) Manufacturer has to provide the following capacity calculations and all supporting information for the incinerator:

– The daily waste stream rate (kg/day or lbs/day)

? Minimum incinerator burn rate capacities

–  Minimum cure time for the refractory to prevent cracking to the refractory

? A complete list of the maintenance parts

? A minimum of 500 lbs of refractory for repairs

? A minimum of 1 gallon of hydraulic oil

7) The contractor shall provide 3 pricing options:

Option 1: To Quote only for the Full System

Option 2: to Quote the price of Full System, and also the Installation

Option 3: To provide training to appropriate relevant staff according to the ‘Operations and Maintenance.