Tag: wasteincinerators

incinerators at 3 facilities to refine medical care waste

a. 2.5 metric loads per day health care waste burner

b. 1.5 metric heaps per day healthcare waste burner

c. 300 kg per day medical care waste burner

Our preferred technology is double-chamber incineration, but if you suggest a different modern technology, that is acceptable.

We request information on the following for every of the above demands:

1. Capital cost (provided expense in Oman)

2. Operation as well as upkeep expenses (annually)

3. Number of drivers called for

4. Item specs (sizes, temperature levels, house time, cycle time etc)

5. Various other auxiliary equipment that is needed or recommended by you

shedding hazardous waste and also chimicals incinerators

3 kinds of incinerators, which are 10Kgs, 20Kgs and 30Kgs for our Tawfiq Healthcare facility make use of in Malindi, Kenya. we are an

ecological consulting company as I’ve discussed previously, we have actually currently contracted with a French business concentrated on

the sale of solid waste burners (ATI) and also we purchased a crematorium for the disposal of solid waste, consisting of $ 180

thousand bucks, as well as now we wish to get into business of marketing waste incinerators pet, as well as since it does not have an

agent in Saudi Arabia. The three models you have indicated are based upon 24-hour operation. Could you please make ideal

referrals for 8-10 hour shift every day (including cooling time)? I assume we will certainly need larger capability incinerators for

each of the 3 requirements.I am interested to understand more comprehensive requirements and rates for your SYC-20 incinerator. I

remain in the marketplace for a small and easy-to-operate burner, nevertheless have little to no experience with such things.

installment and building and construction of SOLID WASTE
MANAGEMENT COMPLEX, for that function we need Sixteen (16) ton/day (7,538 kg/day) Ability Burner System.1.5 ton trash

daily,

called for number of devices -10 to 25 numbers

Installing various type of waste Monitoring systems ideally Incineration as well as others for the state Jammu & & Kashmir India

maker and also merchant of various Incinerator and other items.

Please be kept in mind that we are a leading Bangladeshi company house dealing in various Medical, Surgical, Dental, Health center

items, Plant and Equipment and so forth

Essential is transformer, 220v electric motor, Temperature thermocouple, Blower of Main Burner.

base upon this mobile incinerator,
1. the sort of waste it can be use for (therapy). Healthcare facility waste incinerators with lowered or carbon dioxide CIF khartom–

Sudan

clinical waste burners designs for medical facilities of 100-300 bed as well as 100-1000bed, kindly send out price quote of all the YD versions

and mode of deal/ delivery to nigeria

burner is for usage in the hospital for shedding hazardous waste and also chimicals, minimum Ability 300 per hr.

The hospital burner for use in the medical waste as needed by global ecological administration. Minimum 300 Kg

capacity/hr, Fuel discharged, refractory lined, smokeshaft and also tasting prot. Minimum temperature of 1100 degree Celsius kindly price quote

me finest cost for resale.The ideal cost for resale for the between $7000 to $12000 Usd I already have quotes just require the

ideal cost please. price should be CIF Johannesburg or Durban

Incenerator System

Burners

shed between 5000-10000 kg per hour.Mostly waste from petroleum storage tanks. building and construction, installment and 6 months upkeep expense including specifications.CMSD for Dual Chamber Rotating Klin Kind Incinerator (1st Chamber temperatur not less than 850 level centrigrade & & 2nd Chamber Temperature Level not less than 1200 c with exhaust pipeline 100 meter long with discharge gas filtering mechanism ), Hydroclave (Clinical) with anciliary devices operating criteria: Temperature 250-275 degree feren, Stress 15-35PSI, Sanitation time 30 minus, Set capacity -463 kg. 2 Burners for a healthcare facility in VN. The expected ability is roughly 1,000 kg each day.

LOCAL STRONG WASTE INCINERATORS

a certain type to utilize at a crematorium. Something that allows particularly for ash collection etc.cremation option to the deceased’s family members. Is this item ideal, are ashes easily collected and so on a cremator, for pet facility, can you introduce and also all detail of sales, tax obligation, environtment.-Plastic. 500Kg/hr and to be utilized optimal 6 times, is this implies it will give only 3 tons per day? Keeping in mind that job documents requires 10 tons/day
Plastic container-.
– Rags & & oiled.
Glass containers as well as aluminum-.
– Oils.
Fat-.
Filter, tires, belts.
– Chemicals, paint.
Household waste-.
Municipal incinerators with a 10-metric ton/24-hour capacity, full with Heaps, control board and also all accessories, complying with 01015 par. 5.16.1.
GREAT DEAL.
2.0

Medical incinerator with a 10 kg/hour (15 lbs/hour) ability shall be built on the site, total with Heaps, control board as well as all devices, abiding by 01015 the same level. 5.16.2.
MUNICIPAL STRONG WASTE BURNERS

Local waste incinerator amounts and capabilities will be made for 24-hour 7-day-a-week constant operation.

Incinerators shall be capable of processing both damp and also dry material and also operating on either diesel fuel, JP-8 gas,

or waste oil; see Plumbing for gas storage system needs. The complying with will be provided as a minimum:

Strengthened concrete placing foundations, feed or charging hoppers (or loaders), main combustion chambers

with ash cleanout doors, secondary combustion chambers with ash cleanout doors, cyclone air filters (or separators),

and also compelled air exhaust heaps (or chimneys).

The billing system will contain, as a minimum, a receptacle for top feeding as well as mechanically operated hydraulic

charging ram or augur. To stop warpage or extreme thermal expansion, a battery charger cooling system making use of either

air or water will be offered.

Primary combustion chamber will be either the rotary- or fixed fixed-hearth (or kiln) type incinerator. Burner

and also combustion air controls shall be fully automatic including, as a minimum, digital ignition as well as all

required interlocks and also safety tools to offer secure operation. The chamber as well as burner will be created to

keep a minimum burning temperature of at the very least 700 to 870 C (1300 to 1600 F), yet will not to go beyond 980

C (1800 F). The ash-removal system will include the automated continuous removal of the ash into an ashquench

pit where cooled down by water as well as gotten rid of by conveyor.

Additional combustion chamber shall be either the rotary- or stationary-hearth (or kiln) kind burner designed to

oxidize (or burn) the organic vapors as well as gases. Burner as well as combustion air controls shall be totally automatic

comprising of, as a minimum, electronic ignition and also all needed interlocks and safety and security gadgets to provide safe

operation. The chamber and burner will be designed to preserve a minimal combustion temperature of a minimum of

930 to 980 C (1700 to 1800 F), but will not to exceed 1150 C (2100 F). The ash-removal system shall consist of, as

a minimum, the straight guidebook removal into a completely dry

Cyclone air filters will be offered to eliminate the bigger particulates. Cyclone air separators may be provided with

powered followers to enhance the rate of the gases inside the cyclone to enhance the collection effectiveness for smaller sized

bits.

5.16.2 MEDICAL WASTE INCINERATORS

Medical waste burners will be especially designed by the supplier to dispose of all medical wastes. All devices shall be made for 8 hrs

per day of continuous procedure as well as be rated in quantity per hr (i.e. kg/hr or lbs/hr).

Burner packing or billing of medical waste will be batched-fed by hand.

Primary burning chamber shall be the stationary fixed-hearth (or kiln), multiple-chamber, retort type or bigger

ability rotary-hearth (or kiln) kind. Heater as well as burning air controls will be completely automated including, as a

minimum, digital ignition and all necessary interlocks as well as safety tools to give safe procedure. The

chamber as well as burner will be designed to maintain a minimal burning temperature of at the very least 760 to 870 C

(1400 to 1600 F). The ash-removal system shall include the automatic continual elimination of the ash right into an ashquench

pit where cooled down by water and removed by conveyor.

Second burning chamber will be a solid-walled and also -floored, horizontal, refractory-lined cyndrical tube kind

incinerator developed to oxidize (or shed) the organic vapors as well as gases. Heater and burning air controls will be

completely automatic comprising of, as a minimum, digital ignition as well as all needed interlocks and also safety and security tools to

offer risk-free operation. The chamber as well as burner will be created to preserve a minimum combustion temperature level

of a minimum of 930 to 1200 C (1700 to 2200 F) with a minimum gas house (or dwell) time of 2.0 secs. The ashremoval

system shall contain, as a minimum, the direct manual elimination right into a completely dry collection receptacle.

Cyclone air filters will be given to remove the bigger particulates. Cyclone air separators may be supplied with

powered followers to raise the speed of the gases inside the cyclone to enhance the collection efficiency for smaller

particles.

5.16.3 INCINERATOR HEAPS (OR CHIMNEYS)

Heap dimension will be in accordance with the manufacturer’s recommendations. Stacks shall be the forced-air kind and also

completely independent and also unattached to nearby structures. As a minimum, pile heights will lessen

downwash of stack discharges because of wind resistant impacts from close-by frameworks and be determined in accordance

with DoD 4715.05-G, Overseas Environmental Standard Assistance File. Heaps shall be provided with

corrosion-resistant steel climate caps.”

incinerator plant specification

1) Power Supply:
( a) Keys Supply:
( i) Solitary Phase supply; 220– 240V, 50Hz
( ii) Three Stage supply; 380– 415V, 50Hz
( iii) The power supply electrical outlet (sockets) for single phase supply system in the hospital is three pins and also complies with BS1363.

(b) Change:
( i) Mains change is an usual issue, the efficiency needs to be influenced by this problem a tolerance of ± 15% or more in both the nominal voltage ought to be permitted.
( ii) Keys Cut-off (black out) is a typical issue. Where necessary, Uninterrupted Power Supply (UPS) System must be included to avoid damages of equipment as an outcome of abrupt disturbance in power supply.
( iii) There are spikes not necessarily from the keys supply however results when certain plants or devices started.
( iv) Vendors must consequently verify to make sure that their power supply systems will not be affected by the above conditions.

2) Supply Of Water
a) Top quality: the mains supply is tough water. The vendor needs to check/modify their equipment with filters or descalers where required.
b) Stress: this varies and associated with frequent cut off. Where required, the provider ought to include boosters or pumps to conquer this issue.
c) Where required, distributors should consist of water distillers

2-83 Area VI. Demands

3) Temperature level: ambient temperature arrays in between 21– 450 C or even more in poorly ventilated areas. The hottest month of the year is March. Environmental temperature level can be such that inferior rubber and also plastic products can conveniently melt or warped. Prospective buyers must make certain all products will have the ability to endure such temperatures

4) Humidity: moisture is normally high concerning 65– 90%. Electronic devices must be secured to prevent the effect of condensation.

5) Dirt: this is a major issue specifically throughout the dry period. Dust enter equipment and clogs up filters. Extra security needs to be supplied where essential as well as where suitable extra filters provided to last not much less than 5 years constant use.

6) Vermin: these are also offered as well as sometimes participate in equipment to chew cable televisions as well as pee on boards to create short circuit. This can be stopped by offering vermin guard where needed to avoid entrance of such devastating animals.
7) The proposed tools has to adapt the present appropriate international criterion such as ISO; CE; IEC, ANSI and/or BS

8) Language:
a) All tags as well as markings on the tools need to be in English language. b) All software application programs in the suggested devices should remain in English
language
c) All manuals have to be in English language.

9) Each of the devices supplied need to be provided with customer and also technical handbooks. Guidelines on their usage, storage space and also solution must be clearly indicated in the manuals and also where necessary, on the devices.

10) Where appropriate the following will apply:
a) Electrical Safety
i) The device needs to be given with a line (power) cord of acceptable toughness, quality, length, and ampacity and also needs to be protected with appropriate stress reliefs.
ii) The device should include, or the bidder or distributor must offer, power plugs that are sufficient for the maximum voltage and also current of the unit.
iii) The framework needs to be based and grounding resistance needs to not go beyond 0.15 ohm.
iv) If the system is dual protected, it ought to be so labeled.
v) Electrical leakage current from the framework of the device must not exceed
500µA per IEC 601-1 b) Effects of Fluids

Area VI. Needs 2-84

i) Individual and also operator safety and security as well as system performance need to not be detrimentally impacted by fluid spills.
ii) If the unit is impacted, it needs to fall short safely.

c) Overcurrent Security
i) Loss of power to various other devices on the exact same branch circuit due to internal equipment mistakes need to be prevented by using integrates or breaker that are plainly labeled as well as easy to replace or reset.
ii) If merges are made use of, a spare fuse must be provided in an identified holder located alongside the primary fuse holder. Long-term markings near each fuse holder should indicate fuse scores.

d) Line Voltage Variation
i) The device must operate satisfactorily at line voltages from -12.5% to +8%.
of the small line voltage of 220Volts.
ii) The system must not be harmed by voltages from -21% to +12.5% of the small line voltage of 220Volts.

e) Electromagnetic Disturbance (EMI).
i) The device’s performance must not be influenced by EMI emitted or conducted with the high-voltage line from one more tool.
ii) If the system is impacted, it should fail securely.

f) Alarms.
i) The unit needs to have visual or audible alarm systems to advise drivers of any kind of system fault that may trigger harmful or erroneous results.
ii) Audible and/or aesthetic indications ought to trigger when the screen reading gets to and stays at the alarm system restriction.
iii) All alarms must be totally explained in the driver’s handbook.

g) Audible Alarms.
i) Audible alarms need to be distinct as well as easily identified.
ii) Distinct alarm systems must be enabled when the unit is activated (i.e., the default volume need to not be set to OFF) as well as should be clearly audible at any kind of quantity setting.
iii) If the alarm system quantity is flexible, it should not be possible to turn the volume down so reduced that it is not most likely to be heard.
iv) Although an audible-alarm silence is acceptable, the alarm should reoccur automatically if the condition is not remedied.
v) If an alarm is silenced, a visual display ought to plainly indicate which alarm system is handicapped.

h) Visual Alarm systems.
i) Visual alarm systems ought to be simple to recognize.

2-85 Area VI. Requirements

ii) The aesthetic alarm must specify to the trouble and remain on up until the alarm system problem is fixed; it must not be possible to shut off the aesthetic alarm.

i) Building and construction Top quality.
i) The system must have no sharp edges.
ii) All external parts ought to be securely mounted.
iii) The system ought to be protected as well as provide appropriate defense versus relocating and electrically stimulated components.
iv) The system ought to be well constructed with durable products to stand up to common misuse and cleaning.
v) Switches, handles, as well as other controls must be designed for conditions of heavy usage.
vi) Wiring and also tubing ought to be nicely organized as well as packed, if ideal. vii) Mechanical, electrical, as well as pneumatic terminators, connectors, outlets, as well as.
solder joints should be developed to prevent liquid infiltration, inaccurate links, and also mismating of suitable as well as couplings.
viii) Connections must be safe to withstand unintended disconnection and should preserve sterility, when ideal.

j) Controls.
i) The controls (i.e., switches over, knobs, and so on) need to be visible as well as plainly determined, and also their features must be self-evident.
ii) Tool style ought to avoid misconception of display screens and also control setups.
iii) Buttons and also controls ought to be shielded against unexpected setup modifications (e.g., because of a person cleaning versus the panel).
iv) Controls needs to be sealed versus penetration of liquids.

k) Classifying.
i) Labels as well as markings ought to be clear and also readable.
ii) Labels and also markings must be resilient enough to endure regular cleaning and also regular wear.
iii) Proper caution legends ought to be supplied on the unit.

l) Ease of Usage and upkeep.
i) The system must be basic to learn to utilize, operate, and also keep.
ii) The system must have abbreviated operating directions included on or with the unit (e.g., on a laminated card attached to the unit).
iii) The device needs to be simple to clean, sanitize, and/or decontaminate, as ideal. iv) The unit ought to be created for simple accessibility to serviceable components.

m) Special upkeep tools, spare-parts as well as consummables.
i) Where needed or needed, the provider has to consist of any kind of special devices required for the maintenance of the suggested devices.
ii) Each devices should be provided with the suggested spare-parts

Area VI. Demands 2-86

required for precautionary upkeep for 5 years and also where necessary consist of supply of advised spare-parts for rehabilitative maintenance.
n) Training.
i) The supplier is needed to supply adequate training on each devices on the appropriate usage and procedure of the tools.
ii) Similarly, distributors are required to provide adequate supplier’s training on the installation and also maintenance( both preventative and restorative).
o) Packaging and also Storage Space Problems of Tools.
i) The devices and elements should stand up to temperature and also moisture extremes most likely to be experienced throughout storage space and also transportation.
ii) The maker should advise treatments for storage of the equipment.

Medical Waste Incinerators

Incinerator but the dimension of chamber > > 2000 x >> 1200 mm. Plan for burn FLUID Waste +/- 20 liter/hr.
Sustained by Heavy OIL Burner.waste disposal incinerator, with the ability of dealing with both wet and completely dry rubbish. That include house hold wastes as well as dry fallen leaves.
The chamber of the incinerator should have the ability to hold about 200 – – 250 kilogram of waste at an offered time. edical Waste Incinerators.
The mobile unit is our top priority then the taken care of devices. Medical Waste Incinerators. The mobile system is our priority after that the fixed systems.
a; Set Capacity for every design, how much tons can we put in one-time. I require tio under stand in term of batch load one-time I can ut in Kgs.
b: Burning capacity per hr, to recognize just how much time it will certainly take to burn one set and what is cooling down timem each.
c: The amount of set can we place in every day basis per 1 day.
d: The majority of systems will certainly be worked on Gas, so I need to understand the needed pressure of gas in psi to run the system without any issue.
e; I do desire to know a typical life of system and after the amount of years we require the repair service of linning etc.

2. What is your minimum ability and maximum capacity incinerator.

3. You do give secodn hand incinerator in good working condition.
4. We require only double chamber dual heater incinerator.
5. Please send us DEFRA and DADR authorization records by accessory, copy of ISO as well as summary of gas emmission report from burners.

Medical Waste Incinerator PROPOSAL

1. Technical specifications;

I. Dimension of the Incinerator 4,410 W x 3,037 L x 4,836 H mm

II. Ability of the Incinerator Medical waste 50 kg/hr. set feeding (low level calorie worth: 4,000 5,000 kcal/kg)

III. Utility

Utility problem for the incineration devices operating is the adhering to.

1) Fuel: Light oil or Kerosene

2) Electrical Power

Electric Motor

-0.1– 110kW: AC 220V x 3PH x 50Hz

– – Below 0.1 kW: Air Conditioner 220V x 1PH x 50Hz Control Circuit

– – MCC control: A/C 220V x 1PH x 50Hz

– – Instrument: Air Conditioner 220V x 1PH x 50Hz

– – Switch Over Gear: Air Conditioning 220V x 1PH x 50Hz

2. Door -to-door transportation, Setup, Commissioning and Training

3. Prices quotation

– – Cost requires to be given in Ethiopian Birr (incl. VAT)

– – Cost need to include extra cost elements such as products, insurance, installment and training for essential personnel, until approval obligation where suitable

emissions Directive 2000/76/EC

WASTE INCINERATOR

–          150 KG/HR

–          Compliant with EU rules, Directive 2000/76/EC

–          Fuel type: Diesel

–          Easy management and maintenance

–          Temperatures:

850 deg C for municipal waste

1000 deg C for medical waste

1100 deg C for dangerous waste containing halogenated organic substances with content of chlorine or its compounds.