Tag: wasteincinerators

GENERAL SPECIFICATIONS FOR BURNERS

Main and additional burners: Different electrically spark-ignited main heaters as well as secondary heaters with automatic control will be made use of to accomplish the specified temperature needs in the main and also additional chambers. The fires of the main and also secondary heaters will not strike the burner wall surfaces or floor.
The main burning chamber have to:

1. Be accepted as the primary burning zone.
2. Be geared up with a burner/s melting gas/fuel or reduced sulphur liquid gas.
Other burning approaches will be evaluated on advantages.

3. Ensure primary air supply is regulated successfully

Ensure minimum leave temperature level is not much less than 850oC

Air supply: Air supply in the key and also second chamber need to be regulated in between 30% -80% as well as 170%- 120% of stoichiometric quantity specifically. Suitable circulation measurement devices will be given on the primary and second air ducting. The combustion air will be provided via a different forced draft fan after accounting for the air provided via burners.The second combustion chamber have to:

1. Be accepted as second combustion area.
2. Be fitted with additional burner/s burning gas or low sulphur liquid gas or any type of ideal fuel.

3. Guarantee additional air supply is regulated successfully.

4. Ensure fire call with all gases is attained.

5. Ensure house time is not much less than 2 (2) secs.
6. Make certain the gas temperature level as gauged against the inside wall in the secondary chamber & & not in the fire area, is not much less than 1100oC.

7. Make certain the oxygen web content of the given off gases is not less than 11%.
Make certain both primary as well as the burning temperatures are maintained till all waste has actually been totally combusted

lnsulation: lnsulation to be utilized for stonework, enhanced concrete, or non-combustible product will protect against damages to the structure from extreme warm and shall be of a thickness to limit the external casing to an optimum temperature of 66 ° C in an ambient temperature of 21 ° C when the burner is running at full ability.

Refractory: Refractory shall be #super obligation # as well as heat-resistant to a minimum of 1100 ° C in the key chamber as well as 1250 ° C in the secondary chamber. Refractory will also be abrasion immune in the prlmary chamber, constructed of plastic or castable kind refractory, designed to prevent protruding and also destruction because of warmth stress, efficient in sustaining more than twice the per hour burning rate as well as protecting against leakage of fluids, and also with a minimum thickness of 11O mm for walls and also fireplaces

Afterburner Preheat Burner

PRIMARY CHAMBER

Sturdy steel casing

Top quality refractory lining and insulation Big full dimension leading tons counteracted door
1 x oil/gas fired ignition burners operated on/off

SECONDARY CHAMBER

Sturdy steel casing

Top quality refractory lining and also insulation 2 second gas house time
1 x oil/gas discharged ignition burners ran on/off

CHIMNEY

Heavy-duty stainless steel casing

CONTROL BOARD

Control of primary as well as second burners Temperature level Checking with 4 digit display screen Thermostat control tool for heater (fuel saver) Timer control 0- 12 hours

Important follower timer control

Technical Specifications

Gas
Diesel

Capacity
900kg (1.35 m ³)

Burn Rate
150kg/h

Avg Ash Residue
3%

Avg Fuel Intake p/hr
20ltr

Operation
Minutes. Operating Temperature 950 ° C. Max. Running Temperature 1320 ° C. Residency Time in Secondary Chamber 2 Secs.
Temperature level Tracking YES

ANCILLARIES

Operating and maintenance guidebooks Saves list

TRICK FEATURES

– Afterburner Preheat

– Incineration temperature levels over of 1300 ° C

– 5mm steel covering and totally shield

– Dense refractory concrete lining rated to 1600 ° C

Sudan Medical waste Treatment Plan

•    A burn rate of 25 – 30kg/hr.
•    Consists of two chambers to ensure significant reduction of emissions and be capable of temperatures in the range of 800-1000˚c.
•    Incinerator must be of a low maintenance design, be diesel fuelled and need no more than 15 amp 220-250 V power. KW consumption per hour should be stated.
(1)  What  are  main  differences  between  medical  incinerators:    YD-10C  and  TS10(PLC)?
(2)  After  combustion,  the  medical  waste  becomes  smoke?  Without  smell?  No  pollution?
(3)  What  should  we  do  to  release  the  smoke?    Prepare  a  pipe  to  direct  the  smoke  to  factory  outside?
(4)  Any  operation  guide  for  reference,  we  worry  that  it’s  difficult  to  operate?
•    The incinerator should also be able to run off a generator.
•    The incinerator should have option of tank and should use no more than 12L of diesel fuel per hour to burn 25- 30kg of waste.options for medical waste incineration for Kabul, Afghanistan
•    Design must be such to minimize risk to operators and have a simple start sequence to minimize operator training and skills
•    Solid waste reductions in the range of 90 – 97% should be routinely achieved.a central thermal treatment station in the city of Khartoum (9 million inhabitants) we started with two units of autoclave that treat up to 18 tons a day so far, and looking forward to add an incineration plant/s to serve for medical, pharmaceutical, and hazardous waste.

burner tiny to tool waste dispossal

Carburant Diesel
Capacité (M3) 1.92
Ave Capability 1200kg
Consommation (litre/heure 12
Dimension externes
Longueur (mm) 3110
Largeur (mm) 2150
Hauteur (mm) 3200
Ouverture Porte 1000×× 2000.
Measurement internes.
Longueur (mm) 2200.
Largeur (mm) 1050.
Hauteur( mm) 800. Opération. incinerator little to tool waste dispossal for about 150-200 metropolitan waste from mall, office as well as domestic.

The waste most contain vary materials plastics, rubber, paper, turf, leaves, woods, fruits, packaging carton, and also lots of others

Minimum température d’opération 950.
Maximum température d’opération 1320.
Température de suivi oui.
Thermostat oui.
Ventilateur oui.
Chambre de burning secondaire 2 secs.
garantie minimum 12 mois.
Carburant Diesel.
Capacité (M3) 1.18.
Ave Capability 750 kg.
Consommation (l/h) 6.
Measurement externes.
Longueur (mm) 3110.
Largeur (mm) 1800.
Hauteur (mm) 3300.
Ouverture Porte 770×× 2000.
Measurement internes.
Longueur (mm) 2100.
Largeur (mm) 700.
Hauteur (mm) 800.
Opération. burner small to medium waste dispossal for concerning 150-200 metropolitan waste from shopping center, workplace and also domestic.

The waste most include vary products plastics, rubber, paper, turf, leaves, woods, fruits, product packaging container, and also several others

Minimum température d’opération 950.
Optimum température d’opération 1320.
Température de suivi oui.
Thermostat oui.
Ventilateur oui.
Chambre de combustion secondaire secs.
garantie minimum 12 mois.a little pet crematorium, designs as well as rates

Medical Waste Burner of 20 kg/hr capability with dual burner

3 Medical Waste Incinerator of 20 kg/hr capability with twin burner.Medical Waste Incineration Systems. i’m interested to ruin about 200 kg continues to be. a Medical Burner job for Tehran district. Our purpose for this task is to establish a plant in order to blaze Medical waste with 50 ton/day capability. a burner with 100 kg/ hr burning capacity. As well as it should work with gasoline, 2 chamber. Waste management
Burner
* Exterior size at base 6ft 1.8 m.
* Outside size at leading 4 1/2 feet 1.35 m.
* Inner diameter at base 3ft 0.9 m.
* Internal size at leading 3ft 0.9 m.
* Density of wall surface at base 18cm.
* Thickness of wall at leading 9cm.
* Perpendicular height of wall 4ft.
* Height of Iron bars from grate above ground 1ft

Material Required.
* Pool swish.
* 5 or 6 Iron bars regarding 4 1/2 feet 1.35 m long each.
* Amount of huge rocks for structure.
* 2 vacant kerosene tins for making air vent holes.
* 2ltrs of coal tar.
* 2 brushes.
* Structure 1ft-1 1/2ft deep is dug.
* Filled with large stones and also puddle swish to ground level.
* Vacant kero tins are following put right into position where the vent holes are to appear.
* Wall 1ft high is built with pool swish.
* Iron bars are put in placement leaving an area of concerning 2cm-3cm in between the bars 4ft 1.2 m to be reached.
* Wall plastered smooth.Incinération à haute température pour la damage complète des déchets contaminés ou dangereux.
Principe de combustion pyrolytique avec brûlage des fumées dans une chambre de post-combustion.
Incinérateur double chambre 900 ° C/1200 ° C de capacité 30 kg.
Equipé de: 1 brûleur de combustion + 1 brûleur de re-combustion + 1 laveur de fumées. Capacité de destruction horaire.
En poids: au moins 30 kg.
En volume: au moins 200 litres.
Température:.
Burning: 900 ° C. Article combustion: 1200 ° C.
Puissance des brûleurs.
Combustion: au moins 80 KW.
Blog post burning: 80 KW.
Puissance électrique: environ 2 KW.
Cheminée:.
Area: environ 30×× 30 centimeters.
Hauteur (minimum): au moins 8 m.
Measurement de la porte de chargement: environ 50X50 cm

resilient and very efficient burners with different capacities for hospital/medical waste, cremation and also various other strong waste therapies

Single and also Dual Chamber Medical Incinerator.durable and extremely reliable burners with various capacities for hospital/medical waste, cremation as well as various other strong waste therapies.

Chamber Dual

Burning Rate 10 kg per hour (for two incinerators)

Burning Rate 20 kg per hr (for three burners)

Packing Method Guidebook

No of Burners Single for 10 kg/hour and Dual for 20 kg per hr

Fuel Diesel and also Natural Gas

Warm Up Time Not greater than 20 minutes

Temperature controller Digital

Power Supply Single Stage 220V

Smokeshaft Elevation 20 feet from ground level

· 50kg per hr

· Option for clinical waste.

Kind
Solitary Chambered Round

Feed Product
Documents, Containers wastes

Capability
1000 Kg/Day

Burning Capacity
125 Kg/hr

Layout Standards
Normally validating to IS Standards

Kind of melting procedure
Zero Gas System

Burning Chamber

Kind
Cylindrical

Dimension
1.25 m Dia (Approximate) x 1.2 m Elevation (Approx)

Temperature Level
400– 600 ° C

MOC
Chrome Alloy Steel, inside lining with fire bricks/Ceramic Clay

Outer Lining
Thermal Proof Lining

STACK

Type
Self Sustained

MOC
MS

Accessories
Port Opening as well as Ladder for exhaust testing with total online rubbing system, thermostat

The systems will be used for our customer camps in the field. These Camps vary in manning size from 20– 200 individuals. Each website has a medical center, a really little usage for clinical yet will require it.

Various Sorts Of Incinerators

hazardous waste high temperature incinerators for the therapy of contaminateds materials. The waste will certainly be blended, including medical, oily wastes, woods as well as lab wastes. Key combustion
Diesel/LPG/LNG burning main combustion chamber/primary burning area
Additional combustion
Home time in the second chamber not much less than 2 seconds
Both primary and the second temperature levels preserved till all the waste has been completely combusted
Chimney
Smokeshaft with a minimal elevation of 4 meters above ground level
Minimum leave speed of the discharges not less than 10 metres/second
Temperature level Cautions
Distinct and/or noticeable alarm to caution the driver when the additional temperature level drops to below the required temperature
General
Control box that can be detached and placed on separate stand at least 1.5 meters from incinerator at around 1.6 meter height

Burner version A.
Burn Price 65kg/h minimum.
Weight (kg), please suggest:.
Second Chamber.
Gas Retention Time – – 2 Seconds. Fuel – Diesel/LPG/LNG, please suggest. Power Supply for – Control Box – 220V-240V 50Hz single phase. Minimum operating temperature 850 ° C, please suggest. One year Spare Components Bundle for complete maintainability. 10m Tube Pipeline, suggest length.
I000 Litre Gas Tank + Pipe System, indicate volume.
Added chimney extension, indicate elevation.
Warranty, suggest no of years

Burner design B.
Burn Price 150kg/h minimum.
Weight (kg), please show:.
Second Chamber.
Gas Retention Time – – 2 Seconds. Diesel/LPG/LNG, please indicate. Power Supply for Control Box- 220V-240V 50Hz solitary phase.
Minimum operating temperature 920 ° C, please suggest.
One year Spare Parts Package for full maintainability.
10m Pipe Pipe, show size.
I000 Litre Gas Container + Pipe System, show quantity.
Additional smokeshaft expansion, indicate elevation.
Warranty, show no of years

Burner version C.
Burn Price 250kg/h minimum.
Weight (kg) please indicate:.
Second Chamber.
Gas Retention Time 2 Seconds.
Fuel Diesel/LPG/LNG, please show.
Power Supply for Control Box 220V-240V 50Hz single phase.
Minimum running temperature 920 ° C, please show.
One year Spare Parts Package for total maintainability.
10m Tube Pipeline, suggest length.
I000 Litre Gas Tank + Pipeline System, show quantity.
Added chimney expansion, show height.
Service warranty, indicate no of years

Whole lot 4– High Temperature Waste Incinerator.
HTW Incinerator design D.
Burn Price – – 150kg/hour minimum.
Weight (kg), please indicate:.
Secondary Chamber.
Gas Retention Time 2 Seconds.
Gas Diesel/LPG/LNG, please indicate.
Power Supply for Control Box 220V-240V, single phase 50-60Hz.
Minimum operating temperature 1200 ° C, please indicate.
One year Spare Components Package for total maintainability.
10m Hose Pipe, indicate length.
1000 Litre Gas Tank + Pipeline System, indicate volume.
Additional chimney expansion, indicate elevation.
Warranty, show no of years

Whole lot 5– Mobile Burner.
Mobile Incinerator model E.
Burn Rate 50kg/h minimum.
Weight (kg), please indicate:.
Additional Chamber.
Gas Retention Time – – 2 Seconds. Gas – Diesel/LPG/LNG, please indicate. Power Supply for – Control Box – 220V-240V 50Hz solitary phase. Minimum running temperature 850 ° C, please indicate. One year Spare Components Bundle for complete maintainability. 10m Hose pipe Pipe, show length.
1000 Litre Gas Storage Tank + Pipe System, show volume.
Added chimney expansion, indicate height.
Guarantee, indicate no of years

Lot 6– Mobile Incinerator.
Mobile Burner model F.
Burn Rate 100kg/h minimum.
Weight (kg), please suggest:.
Additional Chamber.
Gas Retention Time – – 2 Seconds. Fuel – Diesel/LPG/LNG, please indicate. Power Supply for – Control Box – 220V-240V 50Hz single stage. Minimum operating temperature 850 ° C, please suggest. One year Spare Components Bundle for full maintainability.
10m Tube Pipe, suggest length.
1000 Litre Fuel Tank + Pipeline System, indicate quantity.
Additional chimney expansion, suggest elevation.
Guarantee, show no of years

Great deal 7– High Temperature Waste Mobile Incinerator.
HTW Mobile Incinerator design G.
Burn Rate 100kg/h minimum.
Weight (kg), please indicate:.
Second Chamber.
Gas Retention Time – – 2 Seconds. Gas – Diesel/LPG/LNG, please indicate.
Power Supply for Control Box – – 220V-240V 50Hz single phase.
Minimum operating temperature 1200 ° C, please show.
One year Spare Parts Plan for complete maintainability.
10m Hose Pipe, indicate size.
1000 Litre Gas Storage Tank + Pipeline System, show quantity.
Additional chimney extension, suggest elevation

Medical waste incineration system

Medical waste incineration system of 300 kg/hr shed price with dual fuel (gas as well as diesel) type, daily 8-16 hrs procedure and a pile elevation of 15 meter.Primary burning
i. The main combustion chamber will be accepted as the key burning zone;
ii. The minimal burning temperature of the main chamber will not be much less than 800 degrees C;

Second combustion
The home time in the second chamber shall not be less than 2 secs;
The gas temperature as measured versus the inside wall in the second chamber, not in the flame zone, will not be less than as indicated in Lots 1-7;
Both the main and the additional temperature levels shall be preserved till all the waste has actually been entirely combusted;

Smokeshaft
The smokeshaft shall have a minimum elevation of 4 meters over ground degree;
The minimal departure rate of the exhausts will not be much less than 10 metres/second; 1. Capability of destruction in weight: 60 Kg/h.
2. It must have the ability to operate not less than 10 hours/day
3. This burner has to be able to ruin all combustible wastes produced by healthcare facilities, private clinics, research laboratories, institutes, and so on.
4. Style Requirements: Types A, B, C, D, and E of clinical waste
5. ” PYROLYTIC” burning, by regulating the gasification of waste.
6. The burner has to stay clear of the release of black smoke as well as great dust, (Electric) during the loadings.
7. It must be able to lower the quantity of wastes by 98%.
8. It must be able to hold emission in the 2nd melt with gas house of not less than 2 seconds.
9. The incineration ought to be totally devoid of noticeable smoke in addition to offensive odours.
10. The lower calorific power (L.C.P) of this waste will certainly be 3,500 kcal/kg
– The Temperature levels of burning: Minimum will certainly be 850oC as well as max 1400oC
– Post burning: >> 1100oC.
11. The Interior diameter of the Smokeshaft: Ø 400 and its height: 8 m.
12. The Volume of the combustion chamber: 1.200 L.
13. The Measurement of the door for loading in cm: 70×× 70.
14. Heater procedure must be Automatic On/Off.
15. Fuel: diesel.
16. The vendor has to supply necessary details for the very best of the setup.
This incinerator with “PYROLYTIC” burning should have:.
17. A burning chamber of waste:.
* Completely limited door for the hand-operated loading of waste. The loading ought to be Guidebook, Batch Tons.
* A burner of lights which the usage is restricted to the ignition of waste.
* Frontage of packing with door seals gone up on hinges, wheel of screw plug, versatile joint, and packing protecting out of refractory.
* The insulation of the combustion chamber need to be composed of refractory blocks, having a high web content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet steel.
* Composition of the refractory;.
– Refractory concrete:
. Density: ≥ 100 mm
. Nature: 42% of Al203.
– Shield in coarse panels:
. Thickness: ≥ 75 mm.
– Nature: Calcium silicate.
* Heater of lights of waste, with fuel, common mono-bloc casting guiding plunging fire, lights and also safety and security of digital ignition, long-term air flow, electromagnetic sluice entrance of regulation and also separating valve.
* Plate of combustion in Carborundum, avoiding the repairing of glass and slags.

18. A chamber of article combustion of gases.
* A heater of combustion of gases,.
* A device of injection of air enabling a complete recombustion of gases,.
* A gadget of air inlet of cooling of waste gases,.
* A sheath of evacuation of the gases charred.
* Carcass in solid sheet steel with assistance of link.
* Make-up of the refractory;.
– Refractory concrete:.
Density: ≥ 150 mm.
Nature: 65% of Al203.
– Shield in fibrous panel:.
Density: ≥ 85 mm.
Nature: Calcium.
* Burner with fuel, mono-bloc spreading leading kind with straight flame, illumination and safety and security of digital ignition, irreversible ventilation, electro-magnetic sluice gateway of regulation and separating shutoff.
* A second shot of air to guarantee best oxygen web content.
19. A control box making certain the full cycle of burning.

20. Fan:.
* Electro-ventilator dispersing the secondary air, the guideline of the air flow being carried out by valves and also adhering to the control of the automatic cycle.
21. Controls and guidelines:.
Control box watertight to dirt, consisting of:

* A button breaker for every engine (ventilators as well as burners).
* A timer with flexible temporization for the law of each burner.
* A regulator with digital watching for the temperature of combustion.
* A regulatory authority with watch for the temperature level of postcombustion.
* Electric box.

21. The de- ashing must be performed in all-time low of the burning chamber or the deashing ought to be Automatic or hands-on batch de ashing.
22. Refine Filtering system: Scruber to be mentionned as optional.
23. Exhaust Requirements Conformity: BS 3316 or équivalent requirement.
23. Capability to deal with Plastic: Not much less than 40% by weight.
24. CE Manufacturing Compliance: BS EN 746-2-1997.
22. The provider should provide sets of spare parts of very first urgency and consumable of the incinerator.
23. The set up incinerator should birth a one year guarantee.
24. The provider will perforn an onsite setup of the burner.
25. The technological training of operators will have to be provided as well as provided by a professional.
from the factory; it will consist of alleviative and preventative upkeep, as well as using device, etc

INCINERATEUR COMBUSTION DAMAGE OF MEDICAL WASTE PYROLYTIC As Well As LAB

Use diesel, construction in repainted steel resistant aluminium at heats, fire gadget control indicator, charging indication, temperature control device, melting ability of 250 kg/ hr in two phases (primary and second electronic camera).
INCINERATEUR COMBUSTION DESTRUCTION OF MEDICAL WASTE PYROLYTIC AND ALSO LAB.
1. CAPACITY OF WASTE DISPOSAL: 50à60 kg/ h.
2. ABILITY OF PROCEDURE WITHOUT PREVENTING: 10h.
3. SUITABLE FOR WASTE CATEGORIES A, B, C, D As Well As E MEDICAL WASTE BY UNEP As Well As THAT.
4. COMBUSTION “PYROLYSIS” by controlling the waste gasification.
5. CALORIFIC LOWER (LCP) WASTE OF THESE MUST BE OF 3500 KCAL/ H. an incinerator with filling sign, temperature level control functions and with 2 chambers (key and additional).
6. TEMPERATURE LEVEL MAX 1400oC DESTRUCTION.
7. MIN TEMPERATURE OF DESTRUCTION 850oC.
8. SHEDDING ROOM NUMBER: 2 (PRIMARY As Well As SECONDARY).
9. VOLUME CHAMBER: 1200L.
10. DIMENSION OF THE PACKING DOOR: 70CMX70CM.
11. GAS TYPE: DIESEL.
12. POWER SUPPLY: 220 V/ 380 V.
13. SMOKESHAFT ELEVATION: 40 CM.
14. BURNER.
15. VANTILLATEUR BLOCK.
16. BOX CONTROL AND REGULATION.Diesel clinical waste burner made of steel repainted in aluminum.
as well as resistente to high temperatures, device indicator for fire.
control, packing indication, temperature control gadget, burning.
capability of 250Kg/ 10 hrs in 2 phases (primary chamber and.
additional chamber.one should burn 50Kg/hr an additional 600Kg/hr and an additional, 1000Kg/hr. I have visited your internet site as well as would like to ask the complying with inquiries:.
1. Are these units sustained by gas?
2. Do the units ship totally constructed or in items?
3. Are smoke stacks consisted of?
4. Can the systems be set up within a city area or should they be outside city limits?
5. What floor area does each system call for?
6. What sort of enclosure is needed?
7. What is the typical fuel intake for each unit?

burner for medical waste

burner for medical waste.Controlled air clinical waste incinerator created for incineration of bio-medical waste produced at a blood-processing center. The waste to be dealt with mainly includes bio-waste (i.e. physical liquids), contagious and also contaminated materials such as syringes, needles, and other clinical waste (i.e. silicon rubbers, plastic, textiles, documents, packs, and so on). a diesel fired clinical waste burner with a capability of 300Kg/hr. to be installed at a waste disposal site away from populated locations.

Requirements
1) Prospective Buyer or Maker ISO 9001 Certified
2) Respecting worldwide exhaust requirements
Electric features
3) A 230V, 60Hz single-phase electric resource.
4) Protections against over-voltage as well as over-current line problems.
5) Conformity with appropriate Ghanaian standards and also policies.
Operational characteristics
6) Two-stage incineration with dual chamber combustion.Incinerator with Oil Heater.
Require Quantity – – 1 complete Unit/ Establish
Kind of Materials To be Shed –– Solid Waste
Burner Capacity – – 0.2 Kw (200 watts )
Ability –– 2 ton per day
Oil Container ability of Burner – – 300 Lit Oil pump ability – – 0.4 Kw (400 watts ). clinical waste Incinerators for melting healthcare facility waste so we are trying to find a resource