Tag: Waste Incinerators

pet incinerator prices

Spare part list –After burners

Item description                                                No of required

Motor     2

Control box  2

Pump couplings   4

Photo cells    2

Sets ht. leads       2

Sets electrodes    4

Oil valve       1

Nozzle   2

Spare part list –Ram loader

Item description                                                No of required

Reed switch          4

Seal kit  1

Medical waste incinerator Accessories

-Clean out tools

-Loading and ash removal methods.

-Fuel storage tank with the two pump and all accessories.

-Flue gas cleaning system

-Stack discharge.

Medical waste incinerator civil work

-Construct incinerator foundation

-Provide stack support

-Provide open steel structure room for the incinerator.

Medical waste incinerator submittal shall include:-

-Detail installation drawing

-Incinerator and auxiliary product data

-Test reports

-Certificates like CE, ISO,LR, FNOR, TUV and UL

-Energy analysis report

-Project experience

-Pollution control equipment emission rate.

-Noise level limitation.

-Quality assurance

-guarantee

Containerized Mobile Kind Tool Device Waste Burner

medical incinerators

* medical incinerators, The insulation of the combustion chamber should be composed of refractory bricks, having a
high content of aluminium and insulates bricks in order to assure a minimum temperature on
the outside sheet metal.
* Composition of the refractory;

?    Refractory concrete :
?    . Thickness    : ≥100 mm
?    . Nature: 42% of Al203
?    Insulate in fibrous panels :
?    . Thickness: ≥75 mm
?    Nature: Calcium silicate.
* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding  plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.

18.    A chamber of post combustion of gases
* A burner of combustion of gases,
* A device of injection of air allowing a total recombustion of gases,
* A device of air inlet of cooling of waste gases,
* A sheath of evacuation of the gases burnt.
* Carcass in strong sheet steel with support of connection.
* Composition of the refractory;
?    Refractory concrete :
?    Thickness    : ≥150 mm
?    Nature: 65% of Al203
?    Insulate in fibrous panel :
?    Thickness: ≥85 mm
?     Nature: Calcium

Dual Chamber Incinerator available for sale 50-200kgs per hr( in supply).

We supply Double Chamber Incinerator with primary chamber size average 1570Liters and burnning rate 50kgs per hour,100kgs per hour,150kgs per hour,200kgs per hour.

the incinerators are now ready for shipping.

Contact with us for quick respond: +86-13813931455

Secret Product Listing per 01 collection	Trick Burning Chamber
	Secondly Burning Chamber
	Smoke Filter Chamber
	Incinerator PLC Control Situation
	Smokeshaft:10.0 Meters *( upgrade to Stainless-steel, cost-free price)
	Italy oil/gas burner: 02 devices
	Oil Container (if oil gas): 300Liters

Items/Model	TS150( PLC)
Idea	Waste Incineration Therapy
Shed Rate	Criterion 50/100/150/ 200 kg/hour
Feed Capability	Average 750kg/feeding
Control Establishing	PLC( Programmable Thinking Controller Incinerator)
Combustion Chamber	1570L
Internal Dimensions	150x100x105cm
Second Chamber	750L
Smoke Filter Chamber	Yes
Feed Setting	Manual
Voltage	210/230V 50/60Hz
Power	0.9 Kw
Oil Usage (kg/hour)	Ordinary 20.4( D.O)
Thermal ability( kw/hour)	166-332
Gas Use (m3/hour)	***
Temperature Level Show	Digital Existing
Temperature Protection	Yes
Oil Storage Tank	300L
Feed Door	80x60cm
Smokeshaft	10Meter
Smokeshaft Kind	Stainless-steel
1st. Chamber Temperature Level	800 ℃–– – – -1000 ℃
secondly. Chamber Temperature Level	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	8500kg
Exterior Dimensions	300x160x280cm( without smokeshaft)

Simply just how you can find practical incinerators for your regional site?

Waste burners extra components

incinerator installation demo

The switchboard shall operate in a room with the following prevailing conditions:

–      Maximum ambient temperature of 40 0C

–      Maximum relative humidity of 95%

–      Saline atmosphere

–      Altitude: at sea level

–      Climate type: Wet and humid coastal conditions with cyclone associated to a small

tropical island in the Indian Ocean

MAIN DATA

Nominal Voltage 400 Vacs

Rated Insulation Voltage         1000 Vac

Rated frequency

50 Hz

Common Auxiliary Busbar:

–      Material

–      Degree of protection

IP 41

Copper

Ambient temperature Max. 400C

Relative humidity      Max. 95%

Surface Treatment      Manufacturer’s standard paint protection for prevailing

environment conditions

Access   Front and rear

Cable entry   Bottom

Standard      IEC

Auxiliary Voltages:

–      Spring charging motor      110 V DC

–      Control circuits   110 V DC

–      Indication lamp Circuits   110 V DC

pet incinerator for sale

1.    Capacity of destruction in weight: 60 Kg/h.
2.    It should be able to operate not less than 10 hours/day
3.    This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…
4.    Design Specification : Types A, B, C, D, and E of medical waste
5.    “PYROLYTIC” combustion, by controlling the gasification of waste.
6.    The incinerator must avoid the release of black smoke and fine dust, during the loadings.
7.    It should be able to reduce the volume of wastes by 98%.
8.    It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.
9.    The incineration should be completely free from visible smoke as well as offensive odours.
10.    The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg
?    The Temperatures of combustion: Minimum will be 850oC and max 1400oC
?    Post combustion: >1100oC.
11.    The Internal diameter of the Chimney: ? 400 and its height: 8 m
12.    The Volume of the combustion chamber: 1.200 L
13.    The Dimension of the door for loading in cm: 70×70.
14.    Burner operation should be Automatic On/Off
15.    Fuel : diesel
16.    The supplier must provide  necessary information for the best of  the installation
This incinerator with “PYROLYTIC” combustion must have:
17.    A combustion chamber of waste:
* Perfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load
* A burner of lighting which the use is limited to the ignition of waste.
* Frontage of loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.

pet incinerators

The panel and parts hereof shall have the following characteristics:

Finish

All metal parts shall receive a treatment taking the prevailing environment conditions into account.

The top paint colour shall be the Manufacturer’s standard.

Auxiliary Wiring

All auxiliary wiring shall be carried out with wires having a minimum cross section area of

1.5 mm2.

Wiring is connected to terminals blocks in such a way that there is no more than two wires on each terminal.

Current wires from current transformers shall be not less than 6 mm2.

All wires shall be marked at each end for identification.

All markings shall be carried out in compliance with the corresponding circuit diagrams and wiring lists.

Cable Termination

Auxiliary wires will be terminated to numbered terminals.

Main circuit cables will be bolted to numbered bars.

incinerators china

All numbering will be carried out in compliance with the corresponding circuit diagrams and wiring list.

Component Marking

All components inside the switchboard shall be marked for identification.

The  marking  shall  be  effected  by  material  resistant  to  the  prevailing  environment conditions.

All  marking  shall  be  in  English  and  be  in  compliance  with  the  corresponding  circuit diagrams

Labels

The switchboard shall be provided with all necessary labels for control and understanding of the system.

The labels on the exterior of the switchboard shall be engraved PVC and fixed to the board surface by means of screws

or plastic rivets. The text shall be in black and the background shall be white.