Tag: waste-incinerator

For incineration, general and pathological incinerators

50 to 60kg/hr and 100 to 120kg/hr diesel powered incinerator

50 to 60kg/hr and 100 into 120kg/hr diesel powered incinerator.1. 2. Required Incinerating Capacity:
Approximately 4,500 tons per year. The incinerator must capable of incinerating type of waste mentioned or any combinations thereof at a rate of 3 mph. The machine shall be designed to operate for at least five consecutive times nonstop if required.
3. Incinerator Design Requirements:
The system should be simple in design and operation, with minimal electronic components.
3.1 Specific Data that must be offered with the Design
3.1.1 Incinerator Data:
a.Batch Load Capacity;
b.Primary chamber design (thickness, diameter, length, insulation, lining, volume hearth area, weight); c.  Secondary chamber design (thickness, diameter, length, insulation, lining, quantity hearth area,  weight);
c.Exhaust stack layout (thickness, diameter, lining variety of segments, complete stack length, height above base, weight);
d.Type and amount of auxiliary fuel burners;
e.Fuel requirements — type, amounts;
f.Electrical power use;
g.Electrical services required;
h.Water requirements — amounts;
i.Any other input requirements and consumables;
j.Temperatures to be achieved to guarantee suitable destruction of waste and comply with required air pollution control standards (EU Waste Incineration Directive 2000/76);
k.Residence time to ensure suitable destruction of waste and comply with required air pollution control standards;
l.Potential weight loss (percent ) of waste;
m.Options to automatically and continuously monitor and record information such as dates, time of day, batch sequential number;
n.A temperature or visual indicator to display heat status of gear; and
o.Details on picture displays and / or computer recording apparatus.

3.1.2  Air Pollution Control System Data
a.The type of air pollution control equipment selected will comply with EU WID Waste Incineration
b.Directive 2000/76;
c.Details about the gas cleaning systems to improve the removal of fine particles, acid fumes and heavy
d.metals;
e.Details on components, such as:
quencher;
condenser / absorber;
venturi scrubber;
entrainment separator and
emissions pile (s).
 Electrical power use;
f.Any other input demands and consumables (e.g. lime);
g.Details on graphic screens and / or computer recording apparatus;
h.Environmental requirements – The system will have the capacity / capability to comply with relevant air quality criteria; i.e.EU Waste Incineration Directive 2000/76. (or similar standards and criteria acceptable to the Australian Commonwealth Government Department of the Environment);
i.Specify air pollution parameters that are monitored.
3.1.3  Site Requirements for the Incinerator
a.Total land area dimentions;
b.Infrastructure required ( water supply, power supply drainage); and
c.Any specific ecological or climatic/meteorological aspects that needs consideration.
3.1.4  Housing Requirements and Design
a.Details on demands for a safe enclosure to the incinerator and associated air pollution control system. The enclosure will be designed to achieve occupational health and safety requirements such as: a. Free space can be found on either side and heat radiation is kept at a minimum giving the operators an:
b.easy viable environment and ventilation;
c.There are protected storage facilities for waste;
d.There are measures to avoid vermin and insects;
e.The materials are of sufficient structural depth for safety and to withstand sea corrosion.
4. Training, Maintenance And Instruction Manuals
4.1 Maintenance Manuals
Provide details on maintenance requirements, such as:
a.General cleaning and maintenance — frequency, skills / specialized experience required;
b.Expected life span of parts and the system as a whole;
c.Expected frequency of the requirement for replacement of parts;
d.Availability of parts and location of providers;
e.Frequency of need for major overhauls; and
f.Estimated down time needed for general maintenance and major overhauls.an incinerator  for our deceased animals in the farm particularly chicken.

incinerator manufacturer 200kgs/h

Put in a diesel fired incinerator

incinerate mainly pharmaceuticals ( all types of dosage forms … syrups, tablets, injectables ) medical consummabables, and also biological fluids …

1.3FIELD TRAINING
Test the incinerator under actual firing conditions. Verify with analyzing that all controls function within the minimum and maximum limits for temperature or time. Simulate actual unsafe conditions such as high temperatures and flame failure by decreasing the settings for the activation of limit and safety controls.
Run the incinerator under normal load conditions for not less than 6 hours. After 6 hours, temperature readings of the outer shell, taken at not less than 5 random places, shall not exceed the temperature limitation of paragraph furnace structure.
Preheat the incinerator for 4 hours to reach the firing temperature of 982degrees C [1800] degrees F. Weigh and record the complete charge weight. Charge the incinerator at the rated burning capacity in kg pounds per hour for a period of [4] hours and operate in compliance with the manufacturer’s written instructions. Include in operation testing the performance of the mechanical charging facilities, the incinerator, the air pollution control equipment, the ash
– capacity: 300-400 kg/hour
The pharmaceuticals squander like Alu, PVC,PVDC etc.Installation for burning of animal waste cost, existence, repayment terms where it is possible to buy in Russia? I am looking to for capacity between 200 -400kg
– Fuel syetem: Dual fuel( both gas and oil )

•Control
Test the incinerator under actual firing conditions. Verify with testing that all controls function within the maximum and minimum limits for temperature or timing. Simulate actual unsafe conditions such as high temperatures and flame failure by reducing the settings for the activation of limit and safety controls.

•Shell Temperature
Operate the incinerator under normal load conditions for not less than 6 hours. After 6 hours, temperature readings of the outer shell, taken at not less than 5 random locations, shall not exceed the temperature limitation of paragraph furnace construction.
– capacity: 300-400 kg/hour
– Fuel syetem: Dual fuel( both oil and gas)

Containerized Mobile Type Medium Unit Waste Incinerator

Double Chamber Incinerator on sale 50-200kgs per hour(in stock)

We supply Double Chamber Incinerator with primary chamber size average 1570Liters and burnning rate 50kgs per hour,100kgs per hour,150kgs per hour,200kgs per hour.

the incinerators are now ready for shipping.

Contact with us for quick respond: +86-13813931455

	Main Product List per 01 Collection
	Main Combustion Chamber
	Secondary Combustion Chamber
	Smoke Filter Chamber
	Incinerator PLC Control Case Chimney:10.0Meters
	*(upgrade to Stainless Steel, free cost)
	Italy oil/gas burner: 02 units

Oil Tank (if Petroleum fuel): 300Liters	Items/Model
TS150(PLC)	Principle
Waste Incineration Treatment	Burn Rate
Average 50/100/150/200 kg/hour	Feed Capacity
Average 750kg/feeding	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
1570L	Internal Dimensions
150x100x105cm	Secondary Chamber
750L	Smoke Filter Chamber
Yes	Feed Mode
Manual	Voltage
210/230V 50/60Hz	Power
0.9Kw	Oil Consumption (kg/hour)
Typical 20.4(D.O)	Thermal capacity(kw/hour)
166-332	Gas Consumption (m3/hour)
***	Temperature Monitor
Digital Screen	Temperature Protection
Yes	Oil Tank
300L	Feed Door
80x60cm	Chimney
10Meter	Chimney Type
Stainless Steel	1st.
800℃–-1000℃	2nd. Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Gross Weight
8500kg	External Dimensions

BIOHAZARD DISPOSAL INCINERATOR CONTAINERISED IN A 20 FT CONTAINER

TECHNICAL SPECIFICATIONS: COMBUSTION CHAMBER VOLUME (M3); 0.54 m3. SUGGESTED BATCH SIZE: 60 KG, BURN RATE: 69 KG PER HOUR, AVERAGE FUEL CONSUMPTION 13 KG PER HOUR, OPERATIONAL TEMPERATURE: 950-1320 CELSIUS, GAS RETENTION IN SECONDARY CHAMBER 0.5 SECS, WITH TEMP. MONITORING, AVERAGE ASH RESIDUE: 3%, THERMOSTATIC DEVICE: YES,
2. 50 kg/hr

TECHNICAL SPECIFICATIONS: COMBUSTION CHAMBER VOLUME (M3); 0.54 m3. SUGGESTED BATCH SIZE: 60 KG, BURN RATE: 69 KG PER HOUR, AVERAGE FUEL CONSUMPTION 13 KG PER HOUR, OPERATIONAL TEMPERATURE: 950-1320 CELSIUS, GAS RETENTION IN SECONDARY CHAMBER 0.5 SECS, WITH TEMP. MONITORING , AVERAGE ASH RESIDUE: 3%, THERMOSTATIC DEVICE: YES,
DIMENSIONS: EXTERNAL LENGTH (mm): 1520MM, EXTERNAL WIDTH (mm): 920MM, EXTERNAL HEIGHT (mm): 4020 MM
1. Incinerator for Bio-Medical Waste incineration needed
2. 50 kg/hr
3. 2 chambers must be there
4. temperature of primary chamber should be 850 degrees Celsius
temperature of secondary chamber should be 1200 degrees Celsius

How you can discover reasonable incinerators for your neighborhood site?

an animal cremator

2
Oil Tank Capacity
200~~ 300 Litre

11
Dual Combustion Chamber with Built in Smoke Filter ( Dry Scrubber )

6
Non Corrosive / Corrosion Resistant Preferably Stainless for longer Life (Height 5-7 Meter)

7
Fire Brick, Refractoy Brick, Concrete

10
Feed Mode
Fuel

an animal cremator for our company in malaysia.currently we are doing individual private cremation and mass cremation for pets in addition to medical waste.an incinerator that’s capable of burning between 3 to 5 tonnes per day of mixed waste products, plastics, rubber, flammable putrescible waste, medical waste, rubber tyres, paper and cardboard, fabrics, green timber waste etc.. As some of the waste products will include non-flammable solids, the incinerator should be capable of extracting those substances probably via a rotary kiln procedure.

It is not intended to use any fuel, such as oil or diesel, to promote the burning of the waste, since the waste products are required to be incinerated using a free burning procedure. Hot air however from a downstream process will be available to raise the incinerator temperature and burning rate as required. Very high temperatures in the incinerator are not necessary and are not required.

The burning of these waste products is expected to produce toxic emissions which will be cleaned via other existing downstream procedures and a Post Combustion procedure from the incinerator is therefore not required.

The incinerator should be capable of accommodating an automatic waste feed process.Incinerator Specification

S. No.
Standard PLC Control Panel

9
Burning Chamber
Burning Capacity
Feeding Capacity
Control Panel

7
Burners
High Quality European CE Certified Oil Burner

8
Control Panel
Standard PLC Control Panel

9
Power Supply
220/380 Volt Ac 50 Hz.

10
Oil Tank Capacity
200~~ 300 Litre

11
Burning Chamber
Fire Brick, Refractoy Brick, Concrete

Waste incinerators spare parts