Tag: waste-incinerator

Burning capacity 50kg/hr with wet scrubber with dual fired burner

Healthcare risk waste and general waste incinerator

We strive for a sustainable development therefore we are adopting a sustainable medical waste management system, including building a modern sustainable incinerator which will not only cater to our center but also for the other centers in the larger area of the region. We’re aware that we need a  modern incinerator that will not burden the local people or the local environment even more. There are several distinct types of incinerators available (especially recommended to be constructed with local materials), which are cheap to build but are more harmful to individuals and environment.slaughterhouse in Afghanistan in ministry of agriculture. Each plant has capacity of 100 cattle and 500 sheep per day.burn dead chicken of weight 50 kg.4. Waste  type:   healthcare risk waste and general waste
6. Burners:
17. Liquids from flowing into ash pit without being incinerated
15.
1st  chamber 850⁰C  – 900⁰C
Height from base:11m and if there are buildings inside
5. Chimney stack:
Hearth: 1550 ⁰C
8. Main chamber volume  ±1.05 cubic metres
10.
22. Bake out: to be done over 2-3 times
2nd  chamber 1000⁰C
12. .Firing tools provided:Hoe,rake and poker
20. Emission controls:
Ashing doorway: high grade cast iron
Bracing: heavy angle and channel
Height                   ±2125mm
11. Weight excluding chimney  ±6.400Kg at manufacture
Low velocity grit settling chamber
Length                   ±2125mm
1965 or equivalent air pollution standards
Weight of stack:  ±500 Kg
Loading door 5mm mild steel lined with 1550 ⁰C castable general purpose high strength, high abrasion resistant monolithic refractory concrete.
7. Variable speed combustion air blowers
18.
23. Materials of constructions
14. Loading door opening 610 *540mm
16. Description of grate/hearth:A full hearth to be provided to prevent contaminated
Above the apexes of all the roof of such buildings

21.Refractory material :alumina content> 49% and thickness average 102mm
22.Bake out : to be done over 2-3 days
23.Materials of constructions
Case :5mm mild steel
Bracing: heavy angle and channel
Hearth: 1550 ⁰C
Ashing door: high grade cast iron
Loading door 5mm mild steel lined with 1550 ⁰C castable general purpose high strength, high abrasion resistant monolithic refractory concrete.
Incinerator walls and roof: 1550 ⁰C castable monolithic refractory

100-150kgs Burning Speed with Secondary burning to be use in the hospital

Oil tank with 2000Liters capacity

	Items/Model
TS150(PLC)	Picture
	Principle
Waste Incineration Treatment	Burn Rate
Average 100-150 kg/hour	Feed Capacity
Average 750kg/feeding	Control Mode
PLC(Programmable Logic Controller Incinerator)	Main Body Steel
8mm thickness	Chamber Material
High Alumina Fire Brick Wall, 1750℃ Rate	Paint for Outdoor face
800°C Rate	Combustion Chamber
1570L	Internal Dimensions
150x100x105cm	Secondary Chamber
750L	Smoke Filter Chamber
Yes	Feed Mode
Manual	Voltage
210/230V 50/60Hz	Power
0.9Kw	Oil Consumption (Liter/hour)
Typical 14(D.O)	Gas Consumption (m3/hour)
***	Temperature Monitor
Digital Display	Temperature Protection
Yes	Oil Tank
300L	Feed Door
80x60cm	Chimney
10Meter	Chimney Type
Stainless Steel	1st.
800℃–-1000℃	2nd. Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Gross Weight
8500kg	External Dimensions

300x160x280cm(without chimney)

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

an incinerator for food waste and polythene waste management

Eductor air.
Cooling of exhaust gases from 900 — 1000 0 C to around 350 0 C.
IV. Eductor Assembly for :
indicators and
3. Type of fuel : LDO / HSD
Waste, moisture content, calorific value, etc. and shall vary from waste to
Without stack

Burners temperature controlled (TIC — Thermocouple) and operate on ON —
5. Expected gas consumption: 30-35 kgs/hr **(depending upon overall
approx. expected fuel consumption figures.

The Incineration System comprises of :

I. Main Incinerator with
B. Bucket elevator + DFDV mechanism for autoloading and Deashing
waste. The gas consumption also depends upon the frequency of the doorway
As per our requirements we would like the YD 15C little incinerator.Mixed Biomedical waste Incinerator.Contract period:To be determined by the supplier
ii. 1 No. Fully automatic Fuel Oil burner for secondary space.
Dampers, etc. mounted on the common skid of the unit to provide:
Payment provisions:100% prepayment through bank TT after signing of contract.

Please confirm your willingness to do this contract project by sending brochure along with your price quotation for the below specification to enable us submit it to the firm incharge of the contract for their analysis and approval.
mechanism
VII. Oil tank of 1000 ltrs capacity mounted on the slide
THE BURNER SHALL USE DIESEL/OIL
VIII. Running tools and tackles comprising of — rake, hoe, shovel (I No. each).
II i. 1 No. Fully automatic Fuel Oil burner for primary chamber.
III. Centrifugal forced draft fan assembly complete with motor drive, duct and
V. Electrical Control Panel along with safeties, and Audio / Visual
VI. Electrical wiring of the device.
7. Total space requirement: 9 m (L) X 8 m (W) X 6 m (H) Each unit
Keeping the Whole system under negative pressure to prevent hot gases / dust
4.
IX. Chimney of  2.5 Mtr height.

The Incineration System comprises of :

I. Main Incinerator with
A. Primary & Secondary Chamber Modules duly refractory lined, piped & wired.
B. Bucket elevator + DFDV mechanism for autoloading and Deashing
mechanism
II i. 1 No. fully automatic Fuel Oil burner for primary chamber.
ii. 1 No. fully automatic Fuel Oil burner for secondary chamber.
III. Centrifugal forced draft fan assembly complete with motor drive, duct and
dampers, etc. mounted on the common skid of the unit to provide :
Combustion air.

Eductor air.
IV. Eductor Assembly for :
Cooling of exhaust gases from 900 – 1000 0 C to around 350 0 C .
Keeping the entire system under negative pressure to avoid hot gases / dust
particles rushing out of charging door.
V. Electrical Control Panel along with safeties, and Audio / Visual
indicators and
/ or alarms for efficient and safe operation of the system.
VI. Electrical wiring of the unit.
VII. Oil tank of 1000 ltrs capacity mounted on the skid
VIII. Operating tools and tackles comprising of – rake, hoe, shovel (I No. each).
IX. Chimney of  2.5 Mtr height.

Containerized Mobile Incinerator CA100

50 KG/HR BIOMEDICAL INCINERATOR

HIGH TECH MEDICALWASTE INCINERATOR

General
The chimney will have a minimum height of 4 meters above ground level;
One year Spare Parts Package for complete maintainability
Fuel Diesel/LPG/LNG, please indicate

The minimum exit velocity of the emissions will not be less than 10 metres/second;

Temperature Warnings
Minimum working temperature 920 °C, please indicate
4.     Evidence their product meets relevant national or international emissions standards, like the United States Environmental Protection Agency, United Kingdom Department for Environment Food
Minimum working temperature 850 °C, please indicate
Item 11    I000 Litre Fuel Tank + Pipe System, indicate volume
HTW Mobile Incinerator model G
Item 15    1000 Litre Fuel Tank + Pipe System, indicate volume
Secondary Chamber
Burn Rate 50kg/h minimum
Fuel – Diesel/LPG/LNG, please indicate
3.     Each incinerator must have sufficient labelling for parts/areas of high occupational health and safety risk on the incinerator.
Power Supply for Control Box 220V-240V 50Hz single phase
Item 21    Mobile Incinerator model F
Item 16    Additional chimney expansion, indicate height
10m Hose Pipe, indicate length
& Rural Affairs, or European Union regulations and directives.

Item 17    Mobile Incinerator model E
ii.    
Weight (kg), please indicate:
Diesel/LPG/LNG, please indicate
Item 8     Added chimney extension, indicate height
Item 22    10m Hose Pipe, indicate length
Power Supply for Control Box 220V-240V, single stage 50-60Hz
Secondary Chamber
Item 12    Additional chimney expansion, indicate height
Gas Retention Time – 2 Seconds
Item 9    Incinerator model C
Gas Retention Time – 2 Seconds
1000 Litre Fuel Tank + Pipe System, indicate quantity

Chimney
Item 10    10m Hose Pipe, indicate length
Lot 4 — High Temperature Waste Incinerator
Item 20    Additional chimney expansion, indicate height
One year Spare Parts Package for complete maintainability
Control box can be detached and mounted on separate stand at least 1.5 meters from incinerator at approximately 1.6 meter height;

Lot 2
Warranty, indicate no of years
Minimum working temperature 920 °C, please indicate
Weight (kg), please indicate:
Power Supply for Control Box – 220V-240V 50Hz single phase
Item 14    10m Hose Pipe, indicate length
Item 6    10m Hose Pipe, indicate length
One year Spare Parts Package for complete maintainability
Additional chimney expansion, indicate height
Gas Retention Time – 2 Seconds
Minimum working temperature 850 °C, please indicate
Gas Retention Period 2 Seconds
One year Spare Parts Package for complete maintainability
Weight (kg), please indicate:
Gas Retention Time – 2 Seconds
Fuel Diesel/LPG/LNG, please indicate
10m Hose Pipe, indicate length
Power Supply for Control Box – 220V-240V 50Hz single phase
Item 13    HTW Incinerator model D
Lot 5 — Mobile Incinerator
Secondary Chamber
Lot 6 — Mobile Incinerator
I000 Litre Fuel Tank + Pipe System, indicate volume
Gas Retention Period 2 Seconds
One year Spare Parts Package for complete maintainability
Fuel – Diesel/LPG/LNG, please indicate
Minimum working temperature 1200 °C, please indicate
Secondary Chamber
Item 19    1000 Litre Fuel Tank + Pipe System, indicate volume
Burn Rate 100kg/h minimum
One year Spare Parts Package for complete maintainability
Warranty, indicate no of years

Item 17    Mobile Incinerator model E
Burn Rate 50kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 18    10m Hose Pipe, indicate length
Item 19    1000 Litre Fuel Tank + Pipe System, indicate volume
Item 20    Additional chimney extension, indicate height
Lot 6 – Mobile Incinerator
Item 21    Mobile Incinerator model F
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 850 °C, please indicate
One year Spare Parts Package for complete maintainability
Item 22    10m Hose Pipe, indicate length
Item 23    1000 Litre Fuel Tank + Pipe System, indicate volume
HTW Mobile Incinerator model G
Burn Rate 100kg/h minimum
Weight (kg), please indicate:
Secondary Chamber
Gas Retention Time – 2 Seconds
Fuel – Diesel/LPG/LNG, please indicate
Power Supply for Control Box – 220V-240V 50Hz single phase
Minimum operating temperature 1200 °C, please indicate
One year Spare Parts Package for complete maintainability
10m Hose Pipe, indicate length
1000 Litre Fuel Tank + Pipe System, indicate volume

Waste Incineration Treatment Incinerators Avg.100kgs per hour

HICLOVER incinerator exert the advantages and discard the disadvantages of the same kind of equipment at domestic and abroad. It is an unique and international advanced medical waste incineration equipment. The equipment is small size, high efficiency, reasonable process, leading technologies and a high harmless degree, ideal garbage treatment equipment for hospital, laboratory, hotel, station, etc.

	Items/Model
TS100(PLC)	Picture
	Principle
Waste Incineration Treatment	Burn Rate
Average 100 kg/hour	Feed Capacity
Average 200kg/feeding	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
1200L	Internal Dimensions
120x100x100cm	Secondary Chamber
600L	Smoke Filter Chamber
Yes(Dry Scrubber)	Feed Mode
Manual	Voltage
220V	Power
0.7Kw	Oil Consumption (kg/hour)
average 20.4	Gas Consumption (m3/hour)
average 24.5	Temperature Monitor
Digital Screen	Temperature Protection
Yes	Oil Tank
200L	Feed Door
80x60cm	Chimney
10Meter	Chimney Type
Stainless Steel	1st.
800℃–-1000℃	2nd. Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Gross Weight
6000kg	External Dimensions

260x150x180cm

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

Specifications for Dual Chamber Incinerator

INCINERATOR DESCRIPTION

Medium Scale Solid Waste Incinerator