Tag: waste-incinerator

medical waste incinerator

Mobile Containerized Waste Incinerators HICLOVER CA-200

medical waste diesel incinerator

medical waste diesel incinerator Burning Rate:47.5–50kg/hour
3) Compliance with applicable Haitian standards and regulations.

Operational characteristics
Refractory Casting:Minimum 65mm
7) Mounted on a secure foundation, as per example below.

Incinerator with 1 or 3 section type wet scrubber

Waste incinerator producers from china

Incinerate: medical waste and general waste Capability to burn waste:

·         Use: For medications

·         With Chassis to be Mounted in truck/lorry

·         May have a primary and secondary combustion chamber

·         Must have a dilution chamber

·         Ability: 100 Kgs per hour

DIESEL FIRED INCINERATOR, WITH 1000 LTR FUEL TANK AND 6M CHIMNEY

	Items/Model
TS250(PLC)	Picture
	Principle
Waste Incineration Treatment	Burn Rate
Average 250 kg/hour	Feed Capacity
Average 400kg/feeding	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
2000L	Internal Dimensions
210x88x110cm	Secondary Chamber
1000L	Smoke Filter Chamber
Yes	Feed Mode
Manual	Voltage
220V	Power
2.0Kw	Oil Consumption (kg/hour)
Typical 24.2(DO)	Gas Consumption (m3/hour)
***	Temperature Monitor
Digital Display	Temperature Protection
Yes	Oil Tank
1000L	Feed Door
2.04 x 1.06 M	Chimney
3Meter	Chimney Type
Stainless Steel	1st.
800℃–-1000℃	2nd. Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Gross Weight
9000kg	External Dimensions

INCINERATION IS A WASTE TREATMENT PROCESS THAT INVOLVES THE COMBUSTION OF ORGANIC SUBSTANCES CONTAINED IN WASTE MATERIALS. INCINERATION AND OTHER HIGH-TEMPERATURE WASTE TREATMENT SYSTEMS ARE DESCRIBED AS “THERMAL TREATMENT”. INCINERATION OF WASTE MATERIALS CONVERTS THE WASTE INTO ASH, FLUE GAS AND HEAT. THE ASH IS MOSTLY FORMED BY THE INORGANIC CONSTITUENTS OF THE WASTE AND MAY TAKE THE FORM OF SOLID LUMPS OR POWDER.

3.00mx1.60mx3.00m (without chimney)

TWO (2) YEAR MAINTENANCE SPARES PACKAGE FOR LINE ITEM 2 X OIL FIRED BURNER

2 X CEMENT REPAIR KIT (25KG)

2 X THERMOCOUPLE

2 X FIRE ROPE (1M)

2 X HT MASTIC (PER INCINERATOR)

HICLOVER – Medical Environmental 

1 X PPE KIT

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

General specifications of a 100 kg/hr three combustion Chambers Incinerator

General specifications of a 100 kg/hr incinerator
No.	Description	Parameter value
	model		HICLOVER YD100
1	Machine working mode	Oil + Power	Oil + Power
2	Voltage	220V C 3 phase or 1 phase	220V 1P
3	Oil consumption (lit/hr)	Average 25-32 lit/hr/chamber	Average 33Liters/hour/total incinerator 3 burners
6	Incineration rate	100 kg/hr = 400-600 kg/8hr	average 100kgs per hour
7	Feed mode	Manual	manual
8	Primary combustion rate	1000 lit	1080 liters
9	Secondary combustion rate	240 lit	207 Liters
10	Tertiary combustion rate	416 lit	452 liters
11	Combustion chamber material	High temp. resistant concrete	High temp. resistant concrete
12	Internal dimensions (1st chamber)	100*100*100 cm (l*w*h) = 1000 lit	120*100*90cm(l*w*h) = 1080 lit
13	Internal dimensions (2nd  chamber)	40*40*150 cm = 240 lit	Diameter 42*150cm=207 Liters
14	Internal dimensions (3rd  chamber)	40*40*260 cm = 416 lit	Diameter 60*160cm=452 Liters
15	External dimensions	300*155*200 cm (l*w*h)	220*160*370 cm (l*w*h)
16	Door opening	90*90 cm	90*90 cm
17	Additional air fan	1 fan (on the door)	1 fan (on the door)
18	Fuel type	Diesel oil/	Diesel oil
19	Burner	Brand: Radiator or Hofmat	Italy Baltur
20	Chimney length	3-4 meters	5 Meters
21	Chimney type and material	H-type stainless steel, or High temp. resistant concrete	1 Meter High temp. resistant concrete +4 Meter Stainless steel
22	Smoke and smell filter	Yes, two stages.	Dry Scrubber 2 stages
23	Temperature monitor	Yes, (for 1st and 3rd chambers)	Yes, (all 3 chambers)
24	Temperature control	Optional	yes
25	Oil tank	500 lit needed.	yes
26	Burning efficiency	>98%	yes
27	1st chamber temperature	300-700 oC	800-1000 oC
28	2nd chamber temperature	500-1000 oC	1000-1200 oC
29	3rd chamber temperature	800-1200 oC	1000-1300 oC
30	Smoke residency time	>2 sec.	>2 sec.
31	Gross weight	5-8 tons	average 6.5 Ton
32	No. of Burners	3	3

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

incinerator for medical waste

1. GENERAL SPECIFICATIONS:

The incinerator for medical waste needs to be designated for the destruction of all kinds of waste produced by the Center for Health (waste type hospital, clinic, medical laboratory for destructive capacity of 30kg / h). Avoid development of black smoke and dust formation tine loading of waste;
. Afterburner
? 1 for controlling the temperature of the afterburner

– Thickness:                    80 mm
? Provide regular and complete combustion of the waste;
. Combustion
1100 ° C
Mixed combustion chamber: 0.3m3
– The Whole installation will conform to European standards (EU)
– Regulators of fever with digital display:
– The burner ensures a minimum temperature of 1100 ° C constant;
– The hearth is equipped with a stirring system of waste combustion is controlled switch;
? 1 to modulate the temperature of the combustion chamber
– there’s a motor operated valve that controls the flow in line with the combustion.
Afterburner

0.11 KW
– Operating temperature:             1650 ° C maximum
POWER BURNER
Air fan:
Post combustion: 0.2m3
900 ° C
– The afterburner is equipped with access doors in order to ensure regular cleaning of dust;
Chimney    Height: 5m, Diameter: 280mm
‘ TEMPERATURES:
– The electric power is 220V 50Hz single phase.
* Refractory:
– The pressure of the fan is 500 millimeter CE to pierce the bulk of waste during combustion.

b. Post – combustion chamber:

– Heal the gasoline has a minimum temperature of 1100 ° C with a minimum residence time of 2 seconds the afterburner is to;
* Insulation:
– Operating temperature:             1000 ° C maximum
– Nature:                    Refractory bricks with 42 alumina
Operation    12h/24, 6d / 7
– The sole combustion is composed of a refractory lining specially designed to meet the thermal, mechanical and corrosive liquid waste requirements and molten glass;
– Automatic monobloc burner and flame plunge equipped with an electronic ignition system and permanent ventilation.
Fuel    diesel oil
Volume of combustion

room Combustion: 0.3 m3
? The manual controls are provided on each individual item. PRODUCT DIMENSIONS

Description    Dimensions
– The lining is made of refractory bricks and a thermal insulating material ensuring a minimum temperature of the sheet;
? Provide controlled guaranteeing the absence of colour, cloud of smoke or burning odor;
0.11 KW0

Fan power    0.37 kW

Burner combustion:

– The combustion chamber is equipped with a burner to line to ensure correct temperature for the total destruction of waste combustion;
– The dimensions of the floor are equipped laterally main air nozzles that fuel combustion;
Combustion
– The recovery operation of the ashes will take place once a day line before beginning the day’s operation.

Composition of the refractory lining:
? Allow limited fuel consumption

The incinerator with pyrolytic combustion must have:

a. Combustor:

– Chamber strong steel support legs sheet;

Description    Dimensions
Destructive capacity    30 Kg / hour
Operation    12h/24, 6d / 7
Fuel    diesel oil
Chimney    Height: 5m, Diameter: 280mm
Volume of combustion

chamber Combustion: 0.3 m3
Post combustion: 0.2m3
Mixed combustion chamber: 0.3m3
` TEMPERATURES:
. Combustion
. Afterburner
900 ° C
1100 ° C
POWER BURNER
Combustion
Afterburner

0.11 KW
0.11 KW0

Fan power    0.37 kW

Incinerator Parts Mineral Insulated Thermo couple Detector K-Type 300SS

Incinerator Parts Mineral Insulated Thermo couple sensor K-Type 300SS

K type 300SS: M27*2, 300mm Ins,2520 S.S, 2.5mm core 

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

Small scale clinical waste incinerator

Toxic and Harmful wastes,

Combustion supporting materials
Oil
Industrial wastes
35.64

small scale medical waste incinerator Prerequisites
＜78dB

Index of let smoke and waste gas
Medical Incinerator, 24 kg/hr including panel board, controls and accessories
Guide

Medical Incinerator, 24 kg/hr
200 beds

Input Fashion
Domestic garbage
Chimney
0.016
800-10000C

1000-12000C

Burning efficiency
Gas
Medical Incinerator, 6 kg/hr including panel board, controls and accessories
Gas
Combustion burner

Medical Incinerator, 6 kg/hr
＞98 percent

Power consumption
Combustion burner

Medical Incinerator, 12 kg/hr
Oil
Chimney
Blower
Oil
0.065

NOX
Furnace gate
Ringelman’s smoke index＜ degree 1

Smoke concentration
Two combustion closets (wetness drying, high temperature dust removal)

Combustion / Burner
Medical Incinerator, 12 kg/hr including panel board, controls and accessories
Furnace gate

Gas
0.008

CO
Good Quality made in China

Control Electrical
Good Quality made in Italy

Blower
Blower
Coal oil, diesel oil

Temperature inside
Incombustible and volatile materials not allowed in

Process manner
Blower
1000 W

Applied For
220 V

Power
Oil
8.32
Chimney
0.038

H2S
0.031
Generally Speaking, all Kind of wastes and garbages
Good Quality made in China

Capacity 50 Kg/h

Working Voltage
0.176

Medical Incinerator, 24 kg/hr
Medical Incinerator, 24 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner

Medical Incinerator, 12 kg/hr
Medical Incinerator, 12 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner

Medical Incinerator, 6 kg/hr
Medical Incinerator, 6 kg/hr including panel board, controls and accessories
Furnace gate
Chimney
Blower
Combustion burner