Tag: waste-incinerator

General specifications of a 100 kg/hr three combustion Chambers Incinerator

General specifications of a 100 kg/hr incinerator
No.	Description	Parameter value
	model		HICLOVER YD100
1	Machine working mode	Oil + Power	Oil + Power
2	Voltage	220V C 3 phase or 1 phase	220V 1P
3	Oil consumption (lit/hr)	Average 25-32 lit/hr/chamber	Average 33Liters/hour/total incinerator 3 burners
6	Incineration rate	100 kg/hr = 400-600 kg/8hr	average 100kgs per hour
7	Feed mode	Manual	manual
8	Primary combustion rate	1000 lit	1080 liters
9	Secondary combustion rate	240 lit	207 Liters
10	Tertiary combustion rate	416 lit	452 liters
11	Combustion chamber material	High temp. resistant concrete	High temp. resistant concrete
12	Internal dimensions (1st chamber)	100*100*100 cm (l*w*h) = 1000 lit	120*100*90cm(l*w*h) = 1080 lit
13	Internal dimensions (2nd  chamber)	40*40*150 cm = 240 lit	Diameter 42*150cm=207 Liters
14	Internal dimensions (3rd  chamber)	40*40*260 cm = 416 lit	Diameter 60*160cm=452 Liters
15	External dimensions	300*155*200 cm (l*w*h)	220*160*370 cm (l*w*h)
16	Door opening	90*90 cm	90*90 cm
17	Additional air fan	1 fan (on the door)	1 fan (on the door)
18	Fuel type	Diesel oil/	Diesel oil
19	Burner	Brand: Radiator or Hofmat	Italy Baltur
20	Chimney length	3-4 meters	5 Meters
21	Chimney type and material	H-type stainless steel, or High temp. resistant concrete	1 Meter High temp. resistant concrete +4 Meter Stainless steel
22	Smoke and smell filter	Yes, two stages.	Dry Scrubber 2 stages
23	Temperature monitor	Yes, (for 1st and 3rd chambers)	Yes, (all 3 chambers)
24	Temperature control	Optional	yes
25	Oil tank	500 lit needed.	yes
26	Burning efficiency	>98%	yes
27	1st chamber temperature	300-700 oC	800-1000 oC
28	2nd chamber temperature	500-1000 oC	1000-1200 oC
29	3rd chamber temperature	800-1200 oC	1000-1300 oC
30	Smoke residency time	>2 sec.	>2 sec.
31	Gross weight	5-8 tons	average 6.5 Ton
32	No. of Burners	3	3

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-27

DIESEL FIRED INCINERATOR, WITH 1000 LTR FUEL TANK AND 6M CHIMNEY

Items/Model	TS250(PLC)
Picture
Principle	Waste Incineration Treatment
Burn Rate	Average 250 kg/hour
Feed Capacity	Average 400kg/feeding
Control Mode	PLC(Programmable Logic Controller Incinerator)
Combustion Chamber	2000L
Internal Dimensions	210x88x110cm
Secondary Chamber	1000L
Smoke Filter Chamber	Yes
Feed Mode	Manual
Voltage	220V
Power	2.0Kw
Oil Consumption (kg/hour)	Average 24.2(DO)
Gas Consumption (m3/hour)	***
Temperature Monitor	Digital Display
Temperature Protection	Yes
Oil Tank	1000L
Feed Door	2.04 x 1.06 M
Chimney	3Meter
Chimney Type	Stainless Steel
1st. Chamber Temperature	800℃–-1000℃
2nd. Chamber Temperature	1000℃-1200℃
Residency Time	2.0 Sec.
Gross Weight	9000kg
External Dimensions	3.00mx1.60mx3.00m (without chimney)

INCINERATION IS A WASTE TREATMENT PROCESS THAT INVOLVES THE COMBUSTION OF ORGANIC SUBSTANCES CONTAINED IN WASTE MATERIALS. INCINERATION AND OTHER HIGH-TEMPERATURE WASTE TREATMENT SYSTEMS ARE DESCRIBED AS “THERMAL TREATMENT”. INCINERATION OF WASTE MATERIALS CONVERTS THE WASTE INTO ASH, FLUE GAS AND HEAT. THE ASH IS MOSTLY FORMED BY THE INORGANIC CONSTITUENTS OF THE WASTE AND MAY TAKE THE FORM OF SOLID LUMPS OR POWDER.

TWO (2) YEAR MAINTENANCE SPARES PACKAGE FOR LINE ITEM 2 X OIL FIRED BURNER

2 X CEMENT REPAIR KIT (25KG)

2 X THERMOCOUPLE

2 X FIRE ROPE (1M)

2 X HT MASTIC (PER INCINERATOR)

1 X PPE KIT

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-27

waste incinerator manufacturers from china

Incinerate: medical waste and general waste Capacity to burn waste:
400-500kg/hr
Fuel: Diesel
Fuel Consumption: 10 liters/hr maximum
Incineration temperature: 950-1300 degrees centigrade
Casing: thick (min 5mm) stainless steel casing and fully insulated to
withstand sea humidity Voltage 220/240v or 380/415V Frequency 50Hz
high-capacity, powerful, European Standard incinerator,ideal for high volume incineration,with integral after-burner for greater efficiency and emissions control.
Waste Type and Burn Rate
Designed specifically for use by poultry farmers,
sheep farm owners,   abbatoirs and for pet
cremation. The incinerator will burn up to 50kg of
waste per hour (up to 150kg burn
Construction
Mild steel welded fabrication consisting of sheet steel
and structural section supports.
Lining
Monolithic high grade refractory concrete with high grade insulation backing.
Burners
Fully automatic, high-efficiency burners with electronic ignition, flame recognition and combustion control devices fitted.
Loading – Ash removal
Manual ash removal from the primary chamber. (Ash doors are available on request).
Exterior finish
Multi-coat high quality, high-temperature aluminium enamel top coat paint, finished in silver.
Control
Fully automatic sequential control provided by internal
waste incinerator manufacturers from china, PLC system providing control of:
1. Secondary chamber pre-heat
2. Burn cycle (variable)
3. Cool down cycle
Fuel Options
Diesel, LPG, Natural or Bio Gas.
Typical Fuel Consumption
Diesel: 8 / 10 litres per hour
Liquid Propane Gas: 6 / 8 litres per hour
Natural Gas: 7 / 9 Nm3 per hour
Electrical supply
240volt 16 amp.
Key Specifications
Chamber Volume 2.38m3:
2.2m (l) x 0.9m(w) x 1.2m(h)
Load Capacity up to 1000kg
Load Method Top.·         Type: Pyrolytic

·         Use: For drugs

·         With Chassis to be Mounted in truck/lorry

·         May have a primary and secondary combustion chamber

·         Must have a dilution chamber

·         Capacity: 100 Kgs per hour

·         Power Source: Diesel or Natural Gas or Liquified Natural Gas

Incinerator with 1 or 3 section type wet scrubber

medical waste diesel incinerator

medical waste diesel incinerator Burning Rate:47.5–50kg/hour
Minimum Operating Temperature:850o C(primary combustion)
Maximum Operating Temperature:1450 oC(Afterburner chamber)
Secondary Burning Capacity:Compulsory
Density Insulation:20mm High
Refractory Casting:Minimum 65mm
Heavy duty refracting lining to withstand:1500 oC
Average burn out time :maximum:3 hrs
Fuel type:Diesel
Fuel Consumption in L/hr:7.5 to 9
Residence time in secondary chamber:2sec
Residue ash post 100kg:Max 3.8kg
Device for preventing infectious spatter and/or cross-contamination by safely sterilizing needles, rings, etc. by infrared heat.
Electrical characteristics
1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 type.
2) Protections against over-voltage and over-current line conditions.
3) Compliance with applicable Haitian standards and regulations.

Operational characteristics
4) Fast complete sterilization in around 5-7 s.
5) Fully isolated quartz/ceramic tube, to grant safety for the user (no open flame).
6) Working temperature around 820°C.
7) Mounted on a stable base, as per example below.

Mobile Containerized Waste Incinerators HICLOVER CA-200

medical waste incinerator

medical waste incinerator: medical waste and general waste
Capacity to burn waste: 400 — 500 kg/hr
Fuel: Diesel
Fuel Consumption: 10 litres/hr maximum
Incineration temperature: 950 – 1300 °c
Casing: thick (min 5 mm) Stainless steel casing and fully
insulated to withstand sea humidity
Voltage: 220/240 V or 380/415V
Frequency: 50 Hz
Feeding: automatic
Ash 1 leftovers removal: Automatic
Fuel gas filtration system: Yes
Warranty: 12 months
Staff training: Operator & Maintenance staff
Operation and service manuals: 3 sets each
Especifica??es Gerais     6 mm plate steel sheel construction
11cm 1400°C refractory Liner
temperature controlled Burners
secondary combustion burners
interlock switch on load doors
separete ash door
one secondary residence @ 1000°C
400°C silicone Based finish paint
alloy temperature sensor
factory wired and tested
Capacity    20kg/hr
primary Chamber    1607 L
Hearth area    1.36 aq.m
Secondary Chamber    694L
Primary burner (oil)    420.00btu
Secondary burner (oil)    900,000btu
Secondary combustion    1/6 hp
Exhaust stack    46cm x 6m
Electrical service     220/50
System weight    5,700kg
Dimension “D”    152cm
Doad port height e    60x60cm
Ash port height e    36x36cm
General Specifications    6mm plate steel sheel construction
11cm 1400 ° C refractory liner
temperature controlled Burners
secondary combustion burners
interlock switch on load doors
separete ash door
one secondary residence @ 1000 ° C
400 ° C silicone based paint finish
alloy temperature sensor
factory wired and tested
Capacity    20kg/hr
primary Chamber    1607 L
Hearth area    1:36 aq.m
Secondary Chamber    694L
Primary burner (oil)    420.00btu
Secondary burner (oil)    900,000 btu
Secondary combustion    1/6 hp
Exhaust stack    46cm x 6m
Electrical service    220/50
System weight    5.700 kg
Dimension “D”    152cm
Doad port height and    60x60cm
Ash port height and    36x36cm
medical, hospital, veterinary and industrial wastes by medical waste incinerator Process.
So, we’re interested with your Incinerator plants, and we’d like to get quotation and key features description of different capacities of your Incinerator plants, concerning: small models (5 – 25 kg/hr); medium models (25-50 kg/hr) and big models (50-100 kg/hr) and plus.

Pet Crematory HICLOVER A600

Model	A600, crematorium manufacturers
Internal Dimensions	130 x 70 x 65cm
Suit for Animal	Cat – yes	Dog – yes	Pig – no	Cow – no
Main Product List	Primary Combustion Chamber
	Secondary Combustion Chamber
	Mix-Combustion Chamber
	Smoke Filter Chamber
	Incinerator Control Case
	Chimney:5.0Meters *(upgrade to Stainless Steel, free cost)
	Italy oil/gas burner: 02 units
	Oil Tank (if oil fuel): 200Liters

dog cremation urns

Model	A600
Picture
Feed Capacity	Average 30 kgs per feeding(animal)
Burning Rate	Average 15 kgs per hour(animal)
Voltage	220V
Power	0.59Kw
Fuel	Natural Gas or Diesel oil or LPG Gas
Burner	Italy Burner
Feed Mode	Manual Feeding
Fuel consumption (Oil)	10.0-16.0 Kgs/Hour
Fuel consumption (Gas)	10.0-15.0m3/Hour
External Dimensions	175 x 100 x 180cm (main body)
Internal Dimensions	130 x 70 x 65cm(Primary Chamber)
Waste combustion chamber	600Liters
Post Combustion Chamber	200Liters
Oil Tank Capacity	200 Liters or More(Optional)
Door Opening	50 x 60cm
Chimney	5.0M or More(Optional)
Gross Weight	3300kgs
Chamber Material	Refractory Concrete
Max. Heat Value	160,000Kcal/Hr.
Operation Technical Specifications
Solid Chamber temperature	8000C -10000C
Gas Chamber temperature	10000C -12000C
Chamber Anti-Rate	14500C
Residency time	2.0 Sec.
Burning efficiency	＞97%
Waste Lower Calorific Power	3000Kcal

small incinerator for sale

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-27

Waste Incineration Treatment BURNING RATE : 100-150kgs per hour HICLOVER TS150

medical waste incinerators manufacturers

chemical agents to be utilized:
10% heptyl (unsymmetrical dimethylhydrazine) water solution,
heptyl (unsymmetrical dimethylhydrazine) vapour with 0.8 to 1.0 kg/m3 concentration,
10% azotic (nitric) acid water solution,
azotic (nitric) acid vapour with concentration up to 1.1 kg/m3;
2.    neutralization method: thermal decomposition;
3.    neutralization temperature: +800?C to +1200?C;
4.    performance:
?    vapour capacity: 70 to 200 m3/h,
?    water solution capacity: 50 to 500 l/h;
5.    inlet pressure: up to 2 bars;
6.    automatic control system;
7.    overall dimensions shall allow for mounting the unit on a vehicle chassis.
medical waste incinerators manufacturers General Specifications
6mm plate steel sheel construction
11cm 1400 o C Refractory L iner
Temperature controlled Burners
Secondary combustion Burners
Interlock Switch on Load Doors
Separate Ash Door
One Second secondary Residence @ 1000 o C
400 ° C Silicone Based Paint Finish.
Alloy Temperature Sensor
Factory wired and tested
Capacity-20 kg / hr
Primary Chamber-1607 L
Hearth Area-1:36 sq. m
Secondary Chamber-694 L
Primary Burner (oil)-420,000 btu
Secondary Burner (oil)-900,000 btu
secondary Combustion-1/6 hp
Exhaust Stack-46cm x 6m
Electrical Service-220/50
Weight System-5.700 kg
Dimension “D”-152cm
Load Port Height- 60x 60 cm
Ash Port Height -36 x 36 cm