hiclover

New Courtice incinerator hits further delays



CLARINGTON — Clarington’s new energy-from-waste facility will be delayed a second time because the boilers aren’t operating properly and the ongoing startup period could cost Durham Region an extra $1 million.

“I’d rather see it delayed and done right than rushed,” said Clarington Mayor Adrian Foster.

The Durham York Energy Centre facility, located in Courtice, was scheduled to be fully operational on Dec. 14, 2014. Now the Durham York Energy Centre is not expected to be in full working order until the last quarter of 2015.

The major systems of the EFW facility have been tested. The boiler temperature is high enough for the combustion process but the steam temperature isn’t high enough, and officials aren’t sure what the problem is, says Durham’s works commissioner, Cliff Curtis.

The steam temperature has to be high enough to drive the turbine-generator. If the steam is too cool it can damage the turbine.

“It’s like running a car without oil,” said Mr. Curtis.

Covanta, the company building and operating the facility for Durham and York regions, has taken the boilers down for modifications, according to Mr. Curtis. It’s expected to take three weeks for the repairs and modifications. Then there will be a four-week demonstration period, followed by a 30-day acceptance test.

“We’re not getting the temperature we expected out of the boiler. Once we get the temperature up, I think everything will fall into place,” said Mr. Curtis. “It’s Covanta’s problem to deliver us the product that performs the way they said, so they’re going to take the time they need.”

The delay means added consultant costs for construction management, legal advice and baseline ambient air monitoring. A Durham Region works report said Durham’s share of the additional costs is $1 million, which can be provided from a temporary draw on the solid waste management reserve fund.

“What’s the final cost going to look like?” said Clarington Regional Councillor Joe Neal, who added he still has concerns about the emissions meeting the Ministry of Environment rules. “There are clearly issues with getting it started out.”

Since Jan. 16, Durham has been charging Covanta a $10,000-a-day late fee for every day the EFW facility is not fully operational. The invoice has been sent to Covanta, but it hasn’t been paid yet, according to Mr. Curtis.

In mid-February, the incinerator began burning its first haul of curbside garbage. It was part of a testing phase before the facility opens fully.

Durham cancelled landfill contracts and began sending garbage to the Courtice facility. Some garbage was burned at the EFW plant during the test phase, without producing power to the grid. Covanta has also been sending the trash to its incinerator in New York state, or landfills in the Niagara region.

Until the EFW facility is up and running, the Region only pays Covanta half price of the agreed upon per-tonne fee. However, Durham isn’t making any money until the plant is fully operational and selling power back onto the grid.

“We’re still on budget. I’d rather be getting electricity sales on the grid,” said Mr. Curtis.

The plant construction is coming in slightly under budget, according to the works commissioner.

There are a few loose ends that could end up costing Durham Region more money. There is still disagreement with former property owners on the value of the land expropriated for the facility, and a ruling is not expected until fall of next year. The final cost for the utility construction and connection costs is expected in coming months. The baseline ambient air monitoring runs until the EFW facility is operational, so the delay in opening means an ongoing monitoring cost.

“There’s some minor cost over-runs on some of the smaller items but generally we’re financially on track to bring this in on budget and we look forward to having it online by the end of the year,” said Mr. Curtis.

HOW THIS IMPACTS YOU

The Durham York Energy Centre is designed to process up to 140,000 tonnes of waste each year, and generate 17.5 gross megawatts of renewable energy — enough to power between 10,000 and 12,000 homes. A key part of the economic case for the energy-from-waste facility depends on it generating electrical power revenue.

from: http://www.durhamregion.com/news-story/5682601-new-courtice-incinerator-hits-further-delays/



QUEMADOR DE RESIDUOS FUERTE

Cámara primaria: consiste en un hormigón refractario monolítico de alto grado con un respaldo de aislamiento de alto grado. Utilizar un hogar refractario o equivalente para la remoción continua de cenizas.

Cámara secundaria: consta de fibra cerámica refractaria de alta densidad y baja masa térmica con una innovadora capa protectora de baja emisividad. Planta de tratamiento de residuos biomédicos (Incineración) con panel.

INCINERADOR DE RESIDUOS SÓLIDOS Capacidad de alimentación: 200 a 220 Kg.
Tasa de quemado * 60 kg / h
Ingredientes para quemar Algodón, caucho, láminas de PVC, guantes de PE, aceite, botellas de plástico, papel, etc.
Cámaras * Cámara dual.
1: Aire controlado primario
2: Exceso de aire secundario
Requiere monitoreo de temperatura
Se requiere control de temperatura para cámaras primarias y secundarias
Estado del sistema y alarmas Requerido para todos los parámetros necesarios.
Conexiones y accesorios Se requiere un paquete completo (incluidas boquillas y bridas, etc.)
Requerimientos de instalación. Tan bajo como sea posible . Casi tipo Plug & Play.
Bocetos dimensionales, manuales de operación e instalación. Requerido
Apagado: se requiere un sistema de gas
Se requiere aislamiento térmico para la instalación en interiores
Entrega Puerto marítimo de Karachi – Pakistán

Los detalles de los componentes del incinerador son los siguientes:
Rango de características de nombre de componente.
Temperatura de la cámara principal requerida * 800 – 1000 ° C.
Fuente de calefacción Gas natural

Temperatura de la cámara secundaria * 1100-1300 grados. C
Fuente de calefacción Gas natural + propano o fueloil como fuente adicional
Tiempo de residencia sin gas 2 segundos.
Material refractario Material * Alúmina (56 – 80% puro)
Revestimiento * SS 316L
Vida útil * 10 – 15 años.
Temperatura nominal 1600 – 1800 ° C C
Medios Ligeramente ácidos
Material de aislamiento Fibra cerámica
Espesor mínimo 25 “
Sistema de alimentación y extracción de cenizas Puertas cerradas con ventilación hermética (se preferirá la alimentación desde la parte superior)
Repuestos necesarios para 5 años de funcionamiento sin problemas

healthcare facility incinerator

* Burner with gas, mono-bloc casting assisting kind with straight fire, lights and safety and security of digital ignition, permanent ventilation, electro-magnetic sluice gate of policy and separating shutoff.
* An additional injection of air to make certain excellent oxygen content.
19. A control box guaranteeing the total cycle of burning.

20. Fan:
* Electro-ventilator distributing the secondary air, the regulation of the air circulation being accomplished by shutoffs and adhering to the control of the automatic cycle.
21. Controls as well as policies:
Control box watertight to dust, consisting of:

* A button circuit breaker for each engine (ventilators and also heaters).
* A timer with adjustable temporization for the law of each heater.
* A regulatory authority with digital watching for the temperature level of combustion.
* A regulatory authority with digital watching for the temperature of postcombustion.
* Electric box.

21. The de- ashing has to be performed in the bottom of the combustion chamber or the deashing need to be Automatic or manual set de ashing.
22. Refine Filtering system: Scruber to be mentionned as optional
23. Emission Standards Conformity: BS 3316 or équivalent criterion
23. Capability to treat Plastic: Not much less than 40% by weight
24. CE Production Conformity: BS EN 746-2-1997
22. The provider has to give sets of extra parts of first seriousness as well as consumable of the incinerator.
23. The set up burner should bear a one year assurance.
24. The distributor shall perforn an onsite installment of the burner.
25. The technical training of drivers will have to be offered and also given by a professional from
the manufacturing facility; it will contain medicinal and also preventative upkeep, and using machine, etc

NB.: Civil works and any kind of other related services for the setup and also training of operators need to be consisted of in the burner’s cost.
Specification for the shelter of the incinerator: House of the incinerator comprehensive in offer (your house have to have facilities for hand cleaning and also firefighting).
This product and also tools must include in the shed of the burner: foundation in rubble stone, seclusion roofing versus humudity; elevation with brick of 20 cm (bloc cement), proceeding lintel (linteau) in enhanced concrete; steel frame (charpente en steel); roof covering in sheet B.C.A. 28 BG (Toiture en t?le), steel rain gutter, sanitary installation (laundry basin, soakway pit of 20 m of deepness); ash pit of 30 m3, electric setup; concrete piece for dealing with the burner; chanel for evacuation of rain water or waste water, cord mesh for oygenation up the lintel; smooth rougtcasting of walls (interior as well as outside); plinth with cement; 2 metal doors; email paints inside and also latex paints outside your home on walls and on doors; roofing limit (planche de rive); steps for this spec will certainly depend upon the dimension of the incinerator which will identify the size of the shed of the incinerator., etc

Инсинератор с предварительным нагревом форсажной камеры

ПЕРВИЧНАЯ КАМЕРА

Прочный стальной корпус

Высококачественная огнеупорная футеровка и изоляция. Большая полноразмерная дверь с противовесом с верхней загрузкой.
1 x мазутные / газовые запальные горелки, работающие вкл / выкл

ВТОРИЧНАЯ ПАЛАТА

Прочный стальной корпус

Высококачественная огнеупорная футеровка и изоляция, время пребывания в газе 2 секунды
1 x мазутные / газовые запальные горелки, работающие вкл / выкл

КАМИН

Прочный корпус из нержавеющей стали

ПАНЕЛЬ УПРАВЛЕНИЯ

Управление первичной и вторичной горелками Контроль температуры с 4-значным дисплеем Устройство управления термостатом для горелки (экономия топлива) Управление таймером 0-12 часов

Встроенное управление таймером вентилятора

Технические характеристики

Топливо
Дизель

Вместимость
900 кг (1,35 м³)

Скорость сжигания
150 кг / ч

Средний остаток золы
3%

Средний расход топлива в час
20 литров

Операция
Мин. Рабочая температура 950 ° C
Максимум. Рабочая температура 1320 ° C
Время пребывания во вторичной камере 2 секунды
Контроль температуры ДА

ДОПОЛНИТЕЛЬНОЕ

Руководства по эксплуатации и техническому обслуживанию Список запчастей

КЛЮЧЕВАЯ ОСОБЕННОСТЬ

• Предварительный нагрев форсажной камеры

• Температура сжигания выше 1300 ° C

• Стальной корпус толщиной 5 мм и полная изоляция

• Футеровка из плотного огнеупорного бетона до 1600 ° C.

Wastes That Can be Burned or Incinerated

Total combustion converts waste into inert bottom ash with minimal development of smoke, fly ash and also harmful

gases. Numerous aspects affect this procedure including the heating value, moisture as well as chemical composition of the

waste itself, operating conditions in the shed chamber (i.e. temperature level, holding time and also turbulence) and also

driver ability.

The technique used is necessary in identifying what can securely be burned. Particular wastes can only be incinerated

making use of equipment that has actually been particularly developed and also equipped with enough air contamination controls which

attain particular air discharge standards. Waste having chlorinated substances (i.e. chlorinated

solvents and plastics, PVC piping, timber treated with pentachlorophenol or PCB-amended paint, marine driftwood)

must be separated from various other waste as their burning will certainly result in the de novo development as well as exhaust of various

dioxin and furan compounds. Waste including mercury (i.e. batteries, thermostats as well as fluorescent light bulbs) as well as

various other hefty metals (i.e. lead acid batteries, timber treated with lead paint) should not be burned as the mercury

as well as heavy steels will not be ruined. Other waste that needs to not be shed unless using specially developed

incinerators consist of made use of lubricating oil, hydrocarbon contaminated soil, biomedical waste, sewer sludge or any kind of

other waste specifically prohibited by the Division of Environment.

Table 2 supplies a listing of typical wastes that can be shed and those that call for special factor to consider and

therapy. Note that open burning and incineration are recognized as separate columns in the table which

various restrictions apply relying on which approach is used. In general, much more restrictions relate to the

different techniques of open burning because of the incomplete combustion achieved. Fewer restrictions put on

incineration as a result of the operator’s capability to control the burning procedure.

Non-combustible products such as steel and also glass do not burn as well as will certainly rob warmth away from waste that can be

ruined by burning. Flammable waste needs to always be separated from non-combustible waste prior to being filled

into the melt chamber.

Инсинератор YD-500 для Вьетнама

Мы завершаем этот проект в 2010-2011 годах и поставим в порт Хошимин, Вьетнам, полный контейнер размером 1 × 40 футов с открытым верхом.


Предметы / Модель Ярд-500
Скорость горения (кг / час) 500 кг / час.
Емкость подачи (кг) 800 кг
Вес оборудования 13000 кг
Первичная камера (литры) 4000
Вторичная камера (литры) 1500
Внешние размеры (см) 320x220x460
Внутренние размеры (см) 257x147x108
Масляный бак (литры) 500
Дверной проем (см) 108 х 128
Дымоход (M) 14
Тип дымохода Нержавеющая сталь
Вторичная камера ДА
Камера смешанного сгорания ДА
Камера дымового фильтра ДА
Горючее топливо Нефтяной газ
Время проживания 2.0 сек.
Контроль температуры ДА
1-й. Chmaber Температура 800 –1000
2-й. Chmaber Температура 1000 -1200


Медицинская экология  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

máquina de pirólisis de residuos infecciosos china incineradores de animales grandes

Los componentes principales son: etanol, parafina, silicio, hidrato de cloro de aluminio, Bentone, GLP

cotización de incineradores para el tratamiento de residuos químicos industriales,

1 velocidad de combustión debe ser de 30 kg / h promedio
2 el interior del material de la cámara debe ser cemento de hormigón refractario
3 funciona en tres sistemas diesel oil / gas natural o GLP
4 voltaje debe ser 220V

5 la temperatura interior primero debe ser 1000c y la segunda debe ser 1200c
6 la longitud del tubo debe ser de 20 M

Nuestros requisitos son para 125 kg / hr y 42 kg / hr, por favor envíe cotización con catálogo para ambas opciones
Actualmente nos ocupamos de equipos relacionados con la defensa, asistencia en la construcción y equipos médicos, soluciones modulares

para Hospitales, Sistema de Gestión de Residuos, CSSD, Mobiliario y Servicios Hospitalarios. Estamos ubicados en la ciudad capital de

Pakistán, es decir, Islamabad, donde se encuentran todas las oficinas centrales de las Fuerzas Armadas y del Gobierno. Instituciones. Tenemos la capacidad de

Participe en las licitaciones y también tenemos una sólida red de distribuidores y personal de ventas enérgicos / activos en Pakistán y

Afganistán.
5 incinerador 15 kg las especificaciones Incinerador de alta temperatura 99% de eficiencia de combustión Temperatura hasta 1200 ° C o

Sin humo ni olores Excelente retención de calor Funciona con electricidad Tiempos de calentamiento rápidos Temperatura Hasta 1200 ° C o según sea necesario

Capacidad 15 Kg Eficiencia de combustión 98% Ruido- <78db Potencia – Cámara eléctrica Cámara simple / bicameral Alarma de seguridad Emergencia

Dispositivo de control de ventilación Dispositivo de control de contaminación del aire Certificado CE e ISO

Me gustaría preguntarle acerca de una planta de energía quemando desechos. Tenemos muchos campamentos para personas desplazadas en Siria, y

quiere comprar una planta para generar electricidad mediante la incineración de residuos municipales Por favor envíeme una oferta o cualquier detalle.

Animal Carcass Incinerator



Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock. 

Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. Animal iacinerator, animal incincerator pricing, animal incineration, animal incineration emerging technologu, animal incineration equipment in china, animal incineration equipment 
Prices, The updated design feature of our range of incinerators make them one of the most cost effective in the world.

Items Specification
YD Model YD-30 / YD-50 / YD-100 / YD-150 / YD-200 / YD-300 / YD-500 / YD-600
Main Product List Primary Combustion Chamber
Secondary Combustion Chamber
Mix Combustion Chamber
Smoke Filter Chamber
Incinerator Common Control Case
Stainless Steel Chimney
Italy oil/gas burner: 02 units
Oil Tank (if oil fuel)

ОБЩИЕ ХАРАКТЕРИСТИКИ ДЛЯ ИНСИНЕРАТОРОВ

Первичные и вторичные горелки: отдельные первичные горелки с электрическим искровым зажиганием и вторичные горелки с автоматическим управлением должны использоваться для достижения заданных температурных требований в первичной и вторичной камерах. Пламя первичной и вторичной горелок не должно попадать на стены или пол инсинератора.
Первичная камера сгорания должна:

1. Принять как первичную зону горения.
2. Быть оборудованным горелкой, работающей на газе / топливе или жидком топливе с низким содержанием серы.
Другие методы сжигания будут оцениваться по существу.

3. Обеспечьте эффективное управление подачей первичного воздуха.

Убедитесь, что минимальная температура на выходе не ниже 850 ° C.

Подача воздуха: Подача воздуха в первичную и вторичную камеры должна регулироваться в пределах от 30% -80% до 170% -120% от стехиометрического количества соответственно. На воздуховодах первичного и вторичного воздуха должны быть предусмотрены подходящие устройства измерения расхода. Воздух для горения должен подаваться через отдельный нагнетательный вентилятор с учетом воздуха, подаваемого через горелки. Вторичная камера сгорания должна:

1. Принять как вторичную зону горения.
2. Быть оборудованным вторичной горелкой, работающей на газе или жидком топливе с низким содержанием серы, или любым подходящим топливом.

3. Убедитесь, что подача вторичного воздуха регулируется эффективно.

4. Обеспечьте контакт пламени со всеми газами.

5. Убедитесь, что время пребывания составляет не менее двух (2) секунд.
6. Убедитесь, что температура газа, измеренная у внутренней стенки вторичной камеры, а не в зоне пламени, не ниже 1100oC.

7. Убедитесь, что содержание кислорода в выделяемых газах не менее 11%.
Убедитесь, что температура первичного контура и температура сгорания поддерживаются до тех пор, пока все отходы не будут полностью сожжены.

Изоляция: изоляция, которая будет использоваться для кирпичной кладки, железобетона или негорючего материала, должна предотвращать повреждение фундамента от чрезмерного нагрева и должна иметь толщину, ограничивающую максимальную температуру наружного кожуха 66 ° C при температуре окружающей среды 21 ° C при работе инсинератора на полную мощность.

Огнеупор: Огнеупор должен иметь # сверхмощный # и быть теплостойким как минимум до 1100 ° C в первичной камере и до 1250 ° C во вторичной камере. Огнеупор также должен быть устойчивым к истиранию в первичной камере, изготовлен из пластика или огнеупора литого типа, спроектирован для предотвращения вздутия и разрушения из-за теплового напряжения, способен поддерживать более чем вдвое превышающую часовую скорость горения и предотвращать утечку жидкостей, и с минимальным толщина 110 мм для стен и очагов

mobile burner

  1. Petrol: diesel
  1. Consumption: 8-10liter/hour
  1. Capacity: to cremate (carrion and spoils) 350-400kg/hour
  1. Temperature: 900-1350?C
  1. Operation temperature: -30~40?C
  1. Incinerator weight: 1800-2000 kg
  1. Volume: 0.70-0.80m/cube
  1. Exterior dimension: 1.4-1.6*1.0-1.15m (L*W)

A burner stands for a complete service to the trouble of disposal of all medical facility waste kinds. The liquid fuel

is diesel. The burner ought to fulfill the setting standards. Expected Technical specifications

The burner will be completely self consisted of. incinerators that are stainless

steel with destruction rate of 15kg per hr. bactch lots of 10-15kg of

waste as well as average temperature level of 8500 degress c.