Archive: July 31, 2025

waste burner manufacturers from china

Incinerate: medical waste and also basic waste Capacity to melt waste:
400-500kg/ hr.
Gas: Diesel.
Gas Intake: 10 liters/hr optimum.
Incineration temperature: 950-1300 degrees centigrade.
Case: thick (minutes 5mm) stainless steel covering as well as totally protected to.
hold up against sea humidity Voltage 220/240v or 380/415V Regularity 50Hz.
high-capacity, powerful, European Criterion burner, perfect for high volume incineration, with integral after-burner for greater performance as well as exhausts manage.
Waste Type as well as Melt Rate.
Made particularly for usage by fowl farmers,.
lamb farm owners, abbatoirs as well as for pet.
cremation. The burner will shed up to 50kg of.
waste per hour (as much as 150kg shed.
Construction.
Mild steel welded construction containing sheet steel.
as well as structural area supports.
Cellular lining.
Monolithic high quality refractory concrete with high grade insulation backing.
Heaters.
Totally automatic, high-efficiency burners with digital ignition, flame acknowledgment as well as combustion control gadgets fitted.
Loading– Ash removal.
Hands-on ash elimination from the key chamber. (Ash doors are readily available on demand).
Outside coating.
Multi-coat premium quality, high-temperature aluminium enamel leading coat paint, completed in silver.
Control.
Fully automatic sequential control given by interior.
waste burner producers from china, PLC system providing control of:.
1. Additional chamber pre-heat.
2. Shed cycle (variable).
3. Cool cycle.
Fuel Options.
Diesel, LPG, Natural or Bio Gas.
Normal Fuel Consumption.
Diesel: 8/ 10 litres per hr.
Fluid Propane Gas: 6/ 8 litres per hour.
Gas: 7/ 9 Nm3 per hour.
Electrical supply.
240volt 16 amp.
Secret Specifications.
Chamber Quantity 2.38 m3:.
2.2 m (l) x 0.9 m( w) x 1.2 m( h).
Lots Capacity approximately 1000kg.
Tons Approach Top. · Kind: Pyrolytic

· Use: For medicines

· With Chassis to be Placed in truck/lorry

· May have a main as well as additional combustion chamber

· Should have a dilution chamber

· Capability: 100 Kgs per hour

· Source Of Power: Diesel or Natural Gas or Liquified Gas

clinical waste diesel incinerator

medical waste diesel burner Burning Price:47.5–– 50kg/hour.
Minimum Operating Temperature:850 o C( key combustion).
Optimum Operating Temperature level:1450 oC( Afterburner chamber).
Secondary Burning Capacity: Compulsory.
Thickness Insulation:20 mm High.
Refractory Casting: Minimum 65mm.
Heavy duty refracting lining to withstand:1500 oC.
Typical burn out time: maximum:3 humans resources.
Fuel type: Diesel.
Gas Consumption in L/hr:7.5 to 9.
Home time in additional chamber:2 sec.
Residue ash blog post 100kg: Max 3.8 kg.
Gadget for protecting against transmittable spatter and/or cross-contamination by securely sanitizing needles, rings, and so on by infrared warmth.
Electric characteristics.
1) A 120V, 60Hz mono-phase electrical source with line connection plug NEMA 5-15 kind.
2) Protections against over-voltage and over-current line conditions.
3) Compliance with applicable Haitian standards as well as regulations.

Operational qualities.
4) Rapid full sterilization in around 5-7 s.
5) Totally isolated quartz/ceramic tube, to provide security for the individual (no open flame).
6) Functioning temperature level around 820 ° C.
7) Mounted on a steady base, as per instance below.

clinical waste burner

medical waste incinerator: medical waste and general waste
Capacity to burn waste: 400 — 500 kg/hr
Fuel: Diesel
Fuel Consumption: 10 litres/hr maximum
Incineration temperature: 950 – 1300 °c
Casing: thick (min 5 mm) Stainless steel casing and fully
insulated to withstand sea humidity
Voltage: 220/240 V or 380/415V
Frequency: 50 Hz
Feeding: automatic
Ash 1 leftovers removal: Automatic
Fuel gas filtration system: Yes
Warranty: 12 months
Staff training: Operator & Maintenance staff
Operation and service manuals: 3 sets each
Especifica??es Gerais     6 mm plate steel sheel construction
11cm 1400°C refractory Liner
temperature controlled Burners
secondary combustion burners
interlock switch on load doors
separete ash door
one secondary residence @ 1000°C
400°C silicone Based finish paint
alloy temperature sensor
factory wired and tested
Capacity    20kg/hr
primary Chamber    1607 L
Hearth area    1.36 aq.m
Secondary Chamber    694L
Primary burner (oil)    420.00btu
Secondary burner (oil)    900,000btu
Secondary combustion    1/6 hp
Exhaust stack    46cm x 6m
Electrical service     220/50
System weight    5,700kg
Dimension “D”    152cm
Doad port height e    60x60cm
Ash port height e    36x36cm
General Specifications    6mm plate steel sheel construction
11cm 1400 ° C refractory liner
temperature controlled Burners
secondary combustion burners
interlock switch on load doors
separete ash door
one secondary residence @ 1000 ° C
400 ° C silicone based paint finish
alloy temperature sensor
factory wired and tested
Capacity    20kg/hr
primary Chamber    1607 L
Hearth area    1:36 aq.m
Secondary Chamber    694L
Primary burner (oil)    420.00btu
Secondary burner (oil)    900,000 btu
Secondary combustion    1/6 hp
Exhaust stack    46cm x 6m
Electrical service    220/50
System weight    5.700 kg
Dimension “D”    152cm
Doad port height and    60x60cm
Ash port height and    36x36cm
medical, hospital, veterinary and industrial wastes by medical waste incinerator Process.
So, we’re interested with your Incinerator plants, and we’d like to get quotation and key features description of different capacities of your Incinerator plants, concerning: small models (5 – 25 kg/hr); medium models (25-50 kg/hr) and big models (50-100 kg/hr) and plus.