hiclover

fabricantes de incineradores de msw

tipo estándar, 11 m de largo, autoportante

Capacidad-220kgs / hr

residuos hospitalarios

humedad promedio-15-20% en el primer tiempo

DIMENSIONES

altura: 2710mm

longitud: 2840mm

Ancho; 2450 mm

Apertura de la puerta de carga: 610 mm x 610 mm

Área de rejilla / Heath: 2.0 (metros cuadrados)

Volumen de la cámara primaria: 2,4 (metros cúbicos)

volumen de la cámara secundaria: 2,72 (metros cúbicos0

volumen total: 5,12 (metros cúbicos)

diámetro mínimo de la pila: 560 mm

  1. Incinerador de residuos sanitarios de 300 kg por día

Nuestra tecnología preferida es la incineración de doble cámara, pero si recomienda una tecnología alternativa, es

aceptable también.

Solicitamos información sobre lo siguiente para cada uno de los requisitos anteriores:

  1. Costo de capital (costo de entrega en Omán)
  1. Costos de operación y mantenimiento (por año)
  1. Número de operadores necesarios
  1. Especificaciones del producto (tamaños, temperaturas, tiempo de residencia, tiempo de ciclo, etc.)
  1. Otro equipo auxiliar que requiera o recomiende
  1. Cualquier otra información e insumos que puedan facilitar el proyecto y agregar valor.
  1. ¿Significaría esto que la planta funcionaría solo 12 horas al día? Operando normalmente la estación las 24 horas

por día debe poder valorizar 12 toneladas por día para una instalación con una capacidad de 500 kg / h.

nanjing clover incinerator price

Huge incinerators – – INDUSTRIAL INCINERATORS – – specs below.

2.) Dimension need for the burners is 750 — — 850 kg capability

3.) The bum rate need to be 80 LL 100 kg/ hour.

4) The key chamber shouId have an operating temperature level of 900 -1200 degree C.

5) The incinerator must despise a high temperature second chamber as well as 2 second gas
retention time at 850- 1150 degree C so that it appropriates for high threat materials.

6). The incinerator must have temperature level monitoring and thermostat control for ease of
operation and also guarantee of bottom temperature to validate right procedure.

7). The burner should be capable of shedding any of the hazardous wastes listed in the
subsequent area.

8) The burner should can burning diesel oil and also need to consist of a bigger gas
tank (10-500 litres) and also generator (3 –– 40 kV )established that can be carried on the trailer with the
incinerator to make sure that the device needs no exterior electrical power supply.

9.) The burner needs to be trailer mounted so that it is a po

Contaminated materials to be Incinerated

Unsafe strong chemical:

Different types of combustible solids, made use of textiles, oil, as well as toner cartridges, chemicals
for water purification and photo consumables and plastic product, vacant
plastic/metal cans that still contain remnant unsafe material, oil absorbing.

Harmful liquid chemical:

Generally various kinds. of Acid, Paint, Varnish, Acetone, White Spirit Aromatic-less
Solvents, Artificial Liquid for Break Solutions, Aircraft De-icing Fluid, Hydraulic as well as
Compressor oil, Freon, made use of in some older refrigeration systems, Pesticide liquid/spray, air
freshen spray and various other similar chemicals.

Polluted gas:
Mostly diesel or gasoline infected by water or solvents.

Used and/or Infected oil:

Made use of electric motor oils and/or mineral oils unfit for their originally meant use. Primarily electric motor
and also transmission oil (roughly 80%) polluted by a mix of white spirit and also acetone (about 51%), hydraulic fluid (about 5%).

Infected water:

Waste oilshvater, leaches, hydrocarbons/water blends, solutions and also leachate.

Polluted soil:

Soil contaminated by oil, gas or 11 chemicals.
Contaminated soil polluted by chemicals that needs to be reused in land fill.
Polluted dirt—— treated and replaced on website.

Oil Contaminated Solids
Rags, Absorbents, Cardboard, oil and also fuel filters, air filters are rule out as harmful materials.

Electronic waste:

Waste electric or digital home appliances or settings up, including printed circuit card,
containing toxic material and/or heavy metal and/or emitting low radiation.

Utilized battery cells:

Dry battery, UPS battery or other types, unsorted waste batteries/ battery cells, having
products that are hazardouy.

Utilized lead-acid batteries:
Waste lead-acid batteries, rained/un-drained, and entire or smashed.

Harmful clinical waste:

Professional and related waste, arising from clinical, nursing or similar techniques and also waste
generated in facilities throughout the investigation or therapy of individuals (bio danger).

Ran out medications, strong:

Waste drugs, drugs and also medications, consisting of delicate medicines.

Ended drugs Iiquid:

Waste liquid pharmaceuticals, various type fluid chemicals for therapy, medical
grease, as well as paraffin based xpired medicines.

Ran out and/or infected fod:

Spoiled fresh food or unusable MRE’s (Meal Ready for Consume – – dry food)

Onsite Training and also Assem Option for Industrial Incinerators

I. The prospective buyers ought to includ 1a rate in their deal for training in a central location (Goma or
Bukavu) approximately 15 personnel in the operation and upkeep of the
devices.

Smart Ash Incinerators

1. Size requirement for the burners is that the device collaborates with a 55 gallon open finished
steel drum.
2. The system should operate wit. no gas and also use just 120V or 220V electrical energy for the blowers.
3. The system needs to can melting oil polluted wastes and also medical wastes with a dampness material of 0-15% J.
4. Each device ought to include two steel drums, to ensure that a spare drum is available.

Spare Components Choice.
If there are any type of supplier suggested spare components, that list as well as cost ought to be consisted of as a choice in the deal.

Мобильное кремационное оборудование

Модель

CA-200

Картина

Скорость горения

В среднем 100 кг / час

Первичная камера сгорания

2000 литров

Дымоход вторичного сгорания

да

Режим подачи

Руководство по эксплуатации

Напряжение

220В

Мощность

3,0 кВт

Тип топлива

Дизельное топливо

Горелка

Италия Оригинал

Расход масла (дизельное топливо)

В среднем 53 кг /час

Внутренние размеры

230 х 100 х 90см (первичная камера)

Внешние размеры

290 х 200 х 170см (первичная камера)

Монитор температуры

да

Емкость масляного бака (для жидкого топлива)

500 литров

Открытие двери

90 х 90см

Длина дымохода

5.0 Метров

Тип дымохода

Нержавеющая сталь

Вес брутто оборудования

9000 кг (с контейнером)

Технические характеристики эксплуатации

Температура в основной камере

800 –1000

Температура вторичной камеры

1000 -1200

Время проживания

2.0 сек.

Эффективность горения

98%

Отходы с более низкой теплотворной способностью

3000 ккал


Мобильный крематорий
HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-03-22

Mine Spews Toxic Fumes: NWT Air Regulations Not in Place



Snap Lake Mine, 220 kilometres northeast of Yellowknife, where elevated levels of dioxins and furans were pumped into the air. | Photo Fire Prevention Services

Last July, two incinerators at De Beers’ Snap Lake Mine were belching out clouds of black smoke, one sending an average of 65 times the accepted national limit of cancer-causing toxins into the air.

The hugely elevated levels of dioxins and furans — released when plastic is burned or garbage is not fully incinerated — were recorded during a four-day “stack test.” According to the World Health Organization, “dioxins are highly toxic and can cause reproductive and developmental problems, damage the immune system, interfere with hormones and also cause cancer.” The Canada-Wide Standards recommends emission levels for dioxins and furans not exceed 80 picograms per cubic metre. The company contracted to do the testing at Snap Lake found that one of the mine’s incinerators was emitting 6.5 times the acceptable limit, while the other incinerator was emitting a whopping 65 times the acceptable limit (5,220 picograms per cubic metre on average, as

emission

 

It’s unclear how long this was going on for, though the report noted the problem was clearly visible: “Black opaque smoke was noted for all tests early in the incineration cycle.”

De Beers did not respond to EDGE’s request for an interview by the time of publication. However, according to a letter from De Beers’ Environment and Permitting Superintendent, Alexandra Hood, sent to the GNWT and Environment Canada in January, the root cause of the problem was “not following standardized work practices,” and running the incinerators, which were only installed in 2013, at too low a temperature.

Since flunking the test, De Beers has retrained staff, rewritten operating procedures and brought in new policy to shut down the incinerators if they’re not meeting the correct temperatures (if it’s safe to do so), according to Hood’s letter. An inspection of the Snap Lake incinerators by a GNWT Lands Officer in March suggests De Beers has ameliorated the problem, at least in part: “No concerns were noted during this inspection,” it states, and “the west incinerator which was burning waste at the time of inspection was emitting clear exhaust gas with no black smoke coming from the stack.”

Whether or not sufficient steps have been taken, however, won’t be known for years: the next stack test is not scheduled until 2019, according to a source close to the issue wishing to remain anonymous.

No GNWT regulation

The fact that, for an undetermined period of time around July 2014, the Snap Lake incinerators were pumping out unacceptable levels of toxic emissions is troublesome in itself. But it points to a much larger problem in the territory; the GNWT does not regulate emissions, require companies to meet the CWS, or mandate stack testing. (The Mackenzie Valley Land and Water Board, likewise, does not regulate air emissions.)

At several points in her letter, Hood notes the lack of regulation, claiming De Beers “will conform with any regulatory requirements regarding incinerator stack testing once enabling legislation is developed and approved in the NWT.”

Without legislation in place, there is nothing to force De Beers or other groups using incinerators (i.e. every single mine in the territory), to keep their emissions at a safe level or undertake stack testing on a regular basis. Each mine has an Air Quality and Emissions Management Plan as part of its environmental agreement, but these plans only dictate reporting requirements, not actual emission targets. And while Hood claims “deficiencies, as measured against the Canada Wide Standards, will be managed through adaptive management and continuous improvement by De Beers,” there’s little government oversight of this “continuous improvement” and no fines or other mechanisms to force polluting companies to remedy their ways.

This problem has been going on for years. According to a Canadian Press report from 2011, the scientific journal Integrated Environmental Assessment and Management found sediments in a lake near the Ekati Mine that had levels of dioxins and furans 10 times higher than those collected from an uncontaminated lake. The same report cited a 2007 study commissioned by Environment Canada which suggested “extensive, uncontrolled burning of wastes could result in substantial accumulations of dioxins and furans in the local ecosystem, some of which will persist for some 8½ years at levels approaching those considered to be of toxicological concern.”

“In most cases we’re below the level that health agencies would (watch) for…” the study continues, “but we’re getting there. And if you have more incinerators and more burning, you may well exceed those levels.”

The GNWT’s Department of Environment and Natural resources did not return EDGE’s request for comment on the lack of regulation.

Why no regulation?

Back in 2001, the GNWT did sign on to the Canada-Wide Standards of dioxins and furans with all other provinces and territories (except Quebec) as part of a national Accord on Environmental Harmonization.

The document says: “Parties are required to take measures to reduce total releases from anthropogenic sources of dioxins, furans… with the goal of their continuing minimization and where feasible (technically and socio-economically), ultimate elimination.” However, it adds, “each jurisdiction will determine the exact means of ensuring compliance” – basically defanging the document by letting provinces and territories renege on their commitment with no repercussions.

Other jurisdictions have taken proactive steps, bringing in legislation to regulate emissions in line with the CWS. The GNWT has not. They did bring in guidelines for managing biomedical waste in 2005, but they have been unwilling to regulate incinerators at mine sites. Their reason? The “waste incinerators operating at remote industrial sites within the NWT… are located on federal crown land and are not regulated by the Government of the Northwest Territories,” says a report from 2009.

This may have been true in 2009, but post-devolution it’s no longer the case. Since April of last year, the mines are on land managed by the GNWT, yet there have been no moves from legislators to start regulating toxic emissions from mine or other industrial incinerators. The last time the issue was discussed in the legislative assembly in 2011, Weledeh MLA Bob Bromley said a “loophole in environmental rules is allowing a growing number of unregulated waste incinerators to release extremely toxic chemicals into the land and water.” He suggested, “when we take on new powers, we must be ready to move with new law.”

Devolution has come, and incinerators are still operating in an unregulated environment. With all the talk of fracking and opening up new mining projects in the territory, it’s now time, more than ever, for the GNWT to get its act together.

 

from: https://edgeyk.com/article/mine-spews-toxic-fumes-nwt-air-regulations-not-in-place/

 



hospital burner

Supply, setup and testing of clinical waste burner with a capability of 75 kg/ hr gas (LPG) total with all accessories and also as a result with the chimney based on the technical specs as well as conditions of public wellness
make a space for the incinerator that fit 3 incinerators as in thing 3.1.1 and affixed to the burner room waste store that suit waste for a period of seven days as well as all the buildings of enhanced concrete with preparingg burner building and also shop with all the work of wiring, electrical as well as illumination systems, water supply and also sanitation
supply incinerator building as well as the waste stockroom with a fire extinguish sprinkler system relies on the source of the water from network of teh basic site, along with a fire alarm system contains sensing units for warm, smoke and this system is linked with the medical facility emergency alarm systems
Supply, setup as well as screening of the air flow system of the incinerator room and also the stockroom with fans ROOF COVERING TOP EXHAUET FOLLOWERS offering them with filters with high performance (HEPA FILTER trip to draw fans with taking the air modification price of 5 times per hr with streams and also air required grilles
Supply, setup, testing different conditioning unit for waste database DUCTED SPLIT UNITES and capability enough to maintain the interior temperature level at 14 degrees Celsius in summertime and winter
Supply, installation, screening of the cooling shop of shielded premade wall surfaces inside the waste room with a capacity of 35 cubic meters to conserve the medical waste at a temperature of no Celsius till shedding including the cooling unit and all accessories
UNSAFE wood.
play timber.
petroleum residual waste.
hydraulic hose system.
calcium hydroxide bags.
bags or wooden boxes including cyanide.
medical waste.
filters.
pharmaceuticals.
NO HAZARDOUS sawdust.
plastic.
plastic and also textil awnings.
wood.
plastic bathtubs.
rubber.
hygienic waste.
EPPs.
plastic bags.
building and construction recurring.
infected dustcloths or towels.
plastic or packaging of food.
polyestirene dishes, glasses, spoon, fork, etc.Capacity incinerator clinical waste to high burning temperature level.
With a smokeless gadget to shield the setting as well as with two combustion chambers furnished with gas burners or oil.
– burner to shed large volume items of 70 cm.
discrepancy: Automatic Control System.
– destructive capability from 20 to 30 kgs.
First-room/ Temperature = 900 ° C combustion.
Second room/ Temperature level = 1200 ° c afterburner

equipo de cremación para animales de compañía

Una cámara de postcombustión de gases

* Un quemador de combustión de gases,

* Un dispositivo de inyección de aire que permite una recombustión total de gases,

* Un dispositivo de entrada de aire de enfriamiento de gases residuales,

* Una vaina de evacuación de los gases quemados.

* Carcasa en chapa de acero resistente con soporte de conexión.

* Composición del refractario;

Hormigón refractario:

Espesor: ≥150 mm

Naturaleza: 65% de Al203

Aísle en panel fibroso:

Espesor: ≥85 mm

 Naturaleza: calcio

* Quemador con combustible, tipo guiado fundición monobloque con llama horizontal, encendido y seguridad de encendido electrónico,

Ventilación permanente, esclusa de regulación electromagnética y válvula de aislamiento.

* Una inyección secundaria de aire para asegurar un perfecto contenido de oxígeno.

19.Un cuadro de control que garantiza el ciclo completo de combustión.

20.Fan:

* Electroventilador distribuyendo el aire secundario, siendo la regulación del flujo de aire realizada por válvulas y

siguiendo el control del ciclo automático.

21 Controles y regulaciones:

Caja de control estanca al polvo, que incluye:

* Un interruptor magnetotérmico para cada motor (ventiladores y quemadores).

* Un temporizador con temporización ajustable para la regulación de cada quemador.

* Un regulador con vigilancia digital de la temperatura de combustión.

* Un regulador con vigilancia digital para la temperatura de postcombustión.

* Caja electrica.

  1. La eliminación de cenizas debe realizarse en el fondo de la cámara de combustión o la eliminación de cenizas debe ser automática o manual

de cenizas por lotes.

  1. Sistema de filtrado de procesos: Scruber debe mencionarse como opcional
  2. Cumplimiento de estándares de emisión: BS 3316 o estándar equivalente
  3. Capacidad para tratar plástico: no menos del 40% en peso
  4. Cumplimiento de fabricación CE: BS EN 746-2-1997

22. El proveedor deberá entregar lotes de repuestos de primera urgencia y consumibles del incinerador.

23.El incinerador instalado debe tener una garantía de un año.

24.El proveedor deberá realizar una instalación in situ del incinerador.

  1. La formación técnica de los operadores deberá ser impartida e impartida por un técnico de

la fábrica; Consistirá en el mantenimiento curativo y preventivo, y el uso de máquina, etc.

ИНСИНЕРАТОР С ДИЗЕЛЬНЫМ ПРИВОДОМ

ИНСИНЕРАТОР, ДИЗЕЛЬНЫЙ
тип отходов: МЕДИЦИНСКИЕ ОТХОДЫ
Теплотворная способность отходов: 4000 ккал / кг
Содержание влаги: 10-25%
Номинальная мощность: загрузка партии 50 кг / час
Вторичная камера: 2 секунды при 850 градусах Цельсия
Первичная камера сгорания должна обеспечивать минимальную температуру на выходе не ниже 850 ° C.

ИЗОЛЯЦИЯ
Силикат кальция
Предельный предел непрерывной работы 1000 градусов C.
Толщина 25 мм

ПРОХОДИМОСТЬ
50 кг / час при номинальной теплоте сгорания 4000 ккал / кг и средней объемной плотности 120 кг / куб. М для обычных отходов и 160 кг / куб. М для медицинских отходов.

waste incinerator

Burring Capacity 100/ 200 KG/ human resources Please create your offer here
Variety of Heater 02 Nos Please write your deal here
Incinerator Type Double Chamber
Main Chamber
Secondy Chamber Please write your offer here
Burner Layout Controlled Air Please compose your offer below
Gas to be made use of Gas/ Deisel Please write your offer here
Packing System Guidebook/ Batch Type Please create your offer here
Warmer Time 20 minutes Please create your deal below
Sort of Paint Heat Resistance enamel paint Please compose your offer below.1. Gasoline: diesel

2. Intake: 8-10liter/ hour

3. Ability: to cremate (carrion and also spoils) 350-400kg/ hour

4. Temperature level: 900-1350? C

5. Operation temperature: -30 ~ 40? C

6. Burner weight: 1800-2000 kg

7. Quantity: 0.70-0.80 m/cube

8. Outside measurement: 1.4-1.6 * 1.0-1.15 m (L * W)

Скорость горения больших размеров : 150-200 кг / час Оборудование для сжигания твердых отходов Первичная и вторичная камера сгорания

Предметы / Модель

TS500 (ПЛК)

Картина

Принцип

Обработка мусора

Скорость сжигания

150 -200 кг /час

Режим управления

ПЛК (Инсинератор с программируемым логическим контроллером)

Камера сгорания

2700л

Внутренние размеры

190x120x 120см

Вторичная камера

1300 л

Камера дымового фильтра

да

Режим подачи

Руководство по эксплуатации

Напряжение

220В

Расход масла (кг / час)

В среднем 28

Расход газа (м3 / час)

***

Монитор температуры

Цифровой дисплей

Температурная защита

да

Масляный бак

1400L

Дверца подачи

90x 80см

Камин

10 метров

Тип дымохода

Нержавеющая сталь

1-й. Температура камеры

800 -1000

2-й. Температура камеры

1000 -1200

Время проживания

2.0 сек.

Вес брутто

15000кг

Внешние размеры

400x210x 300см (без дымохода)

Подачу воздуха следует эффективно контролировать;
Должен быть обеспечен контакт пламени со всеми газами;
Минимальная температура горения первичной камеры должна быть не менее 850 ° C;
Первичная камера сгорания должна быть оборудована средствами дополнительной подачи жидкого топлива.
Первичная камера должна иметь холодную огнеупорную футеровку минимальной толщиной 100 мм.
Во вторичной камере сгорания должны быть соблюдены следующие условия:
Подачу воздуха следует эффективно контролировать;
Должен быть обеспечен контакт пламени со всеми газами;
Размер вторичной камеры должен быть правильно спроектирован, чтобы время удерживания газа было не менее 2 секунд;
Вторичная камера должна иметь холодную огнеупорную футеровку минимальной толщиной 100 мм;
Камера должна включать в себя встроенные вентиляторы горелки сгорания с автоматически регулируемым распределением;
Температура газа, измеренная у внутренней стенки вторичной камеры (не в зоне пламени), не должна быть ниже 1100 ° C;
HICLOVER – Медицинское окружение  

Установки для сжигания отходов
Установка для сжигания медицинских отходов
Кремация домашних животных
Твердые отходы   Мусоросжигатель

Телефон: + 86-25-8461 0201
Мобильный: + 86-13813931455 (WhatsApp / WeChat)
Сайт: www.hiclover.com
Электронная почта: [электронная почта защищена]
Электронная почта: [электронная почта защищена]
Наньцзин Клевер Медицинские Технологии Лтд.

2020-03-21

Hotel Waste Incinerator



Basic Info.

Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Key Features: 
* All models with Dual combustion chamber. *according to order 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane for Intelligent operation. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock. 

The factory workshop local in liuhe Economic Development Zone, suburb of Nanjing and business office local in downtown area. Presently, incinerator line products market cover former Soviet Union area, Africa countries, Asia countries and middle east area.
From year 2010, we negotiated with updated technology from Europe and America manufacturers and establish cooperation relationship in the territory of China market. Animal incinerator bid 2013, animal incinerator deisgin, animal incinerator for sale price, animal incinerator from china, animal incinerator lpg, animal incinerator per hour, Unfortunately, competition in other countries market, country discrimination and worries of intellectual property rights cause failure finally. Presently, we investment more effort, funds and technology development in our own brand, we are to be one of the largest incineration equipment in the world. We have trading branch company for professional export business service.

Items/Model YD-10C YD-20C YD-30C YD-50C
Burning Rate (kgs/Hour) 10 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 50 kgs/Hr.
Feed Capacity (kgs) 40 kgs 40 kgs 50 kgs 80 kgs
Equipment Weight 1200 kgs 1200 kgs 1800 kgs 2200 kgs
Primary Chamber (Liters) 200 200 250 400
Secondary Chamber (Liters) 140 140 140 140
External Dimensions (cm) 170x140x160 170x140x160 170x140x190 180x160x200
Internal Dimensions (cm) 55x55x65 55x55x65 55x55x85 70x70x85
Oil Tank(Liters) 50 100 100 150
Door Opening (cm) 38 x 48 38 x 48 38 x 48 45×55
Chimney (M) 5 5 5 5
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES