hiclover

CONTAINERIZED BURNER FOR INCINERATING HAZARDOUS AND ALSO NON HAZARDOUS WASTES

CONTAINERIZED BURNER FOR INCINERATING HAZARDOUS AND NON HAZARDOUS WASTES (BOTH DOMESTIC As Well As INDUSTRIAL) AT A MINIMUM PRICE OF 300KG/HR WITH THE COMPLYING WITH REQUIREMENTS:

Ø PRIMARY CHAMBER VOLUME 7.2 M ³

Ø BURNING CAPACITY 300Kgs/hr.

Ø PRIMARY CHAMBER TEMPERATURE 850 ⁰ C AND SECONDARY CHAMBER TEMPERATURE LEVEL 1100 ⁰ C

Ø REFRACTORY DENSITY 225MM; REFRACTORY WITHSTAND TEMPERATURE 1400 ⁰ C

Ø RAM LOADER CAPACITY 0.75 M ³; FUNCTIONAL CYCLES EACH DAY 8-16 Humans resources.

Ø GAS DIESEL/NATURAL GAS; VARIETY OF PRIMARY BURNERS & & SCORE: 2 @ 250kw

Ø VARIETY OF SECONDARY BURNERS & & RANKING: 2 @ 400kw; ELECTRIC SUPPLY 230V 60Hz

Ø CONTAINER TIPPER, MONITORING SYSTEM, CLEANSING SYSTEM

Ø GAS CLEANING AND ALSO GAS MONITORING.MSW1000 General Medical Waste Incinerators melt price approximately 100kg/hr
A2400 Animal/ fowl Waste Incinerators burn rate as much as 200kg/hr. Laboratory waste Management system
01. Liqued water filtration system.
02. Number of laboratories – 05
03. The approximated liquid water waste – 6000 L including
a. chemicals
b. contaminants
c. Bio Hazardous products.
Temporary alloted room for filtrations system- 30×× 20.
The following need to be indicating in the biding document.
1. Technique of getting rid of treated waste water.
2. Method of disposing of the sludge.
3. To comply with ISO standard/regulations of Central Environment Authority [CEA] 4. Period for building and construction.
5. Request the cost for every thing of the project [Consultancy/designing/construction] For the whole task.
6. Guarantee period as well as maintaincne.

STRONG WASTE INCINERATOR

Primary chamber – Consists of a monolithic high grade refractory concrete with high grade insulation backing, . Utilising a refractory hearth or equivalent for continuous ash removal.

Secondary Chamber – Consists of high density, low thermal mass refractory ceramic fibre with an innovative low emissivity protective coating. bio medical waste treatment plant ( Incineration )with panel.

SOLID WASTE INCINERATOR    Feeding Capacity:    200 to 220 Kg.
Burn Rate *    60 Kg / hr
Ingredients to be burned    Cotton, Rubber, PVC Sheets, PE Gloves, Oil, Plastic Bottles, Paper etc.
Chambers *    Dual Chamber.
1: Primary Controlled Air
2: Secondary Excess Air
Temperature Monitoring    Required
Temperature Control to Primary & Secondary Chambers    Required
System Status & Alarms    Required for all necessary parameters.
Fittings & Accessories    Complete Package is required ( Including Nozzles & Flanges etc.)
Installation Requirements.    As low as possible . Almost Plug & Play type.
Dimensional Sketch, Operation & Installation Manuals.    Required
Off – Gas System    Required
Heat Insulation    Required for indoor installation
Delivery    Karachi Sea Port – Pakistan

The details of Components of incinerator is as follows:
Component Name        Features                 Range.
Primary Chamber    Temperature Required*    800 – 1000 deg C.
Heating Source    Natural Gas

Secondary Chamber    Temperature *    1100 – 1300 deg. C
Heating Source    Natural Gas + Propane or Fuel Oil as an additional source
Off – Gas Residence Time     2 Seconds.
Refractory Material    Material *    Alumina ( 56 – 80 % Pure )
Lining *    SS 316L
Life Span *    10 – 15 years.
Rating Temperature    1600 – 1800 deg. C
Media    Slightly acidic
Insulation    Material    Ceramic Fiber
Thickness    25 “ minimum
Feeding & Ash Removing     System    Air Tight ventilating locked doors ( Feeding from Top will be preferred)
Spares    Required for 5 Years trouble free operation

dual chamber incinerator

Waste calorific value: 4000KCAL/KG
Wetness Web content: 10-25%.
Nominal Capability: 50Kg/Hour batch load.
Secondary Chamber: 2 Secs @ 850degrees C.
The main combustion chamber should ensure minimal departure temperature level is not less than 850 degrees C.

INSULATION.
Calcium Silicate.
Restricting Continuous service restriction 1000 degrees C.
Thickness 25mm

THROUGHPUT.
50kg/hour at a small calorific worth of 4,000 kcal/kg as well as an average bulk thickness of 120kg/MCubed for basic waste and 160kg/MCubed for healthcare waste.All sorts of chemicals compounds (Biocides) that made use of for Oil procedure sites (water base Drilling, oil operating facilities for the corrosion and also others: The instances of the biocides are “WS-36, HAI-85M, SOFT DRINK ASH, DSMA, MICRO MATRIX, CALCIUM CARBONATE PENALTY, BARAKLEAN, GILSONITE, MIXED WASTE DIRT CHEMICALS, ZINC CARBONATE, CAUSTIC SOFT DRINK, ENVIROTHIN, BARAZAN D,. etc) as well as the materials are fluid and strong.

2. In regards to the amount of shedding the waste, maybe 200 – – 500 kg per hr.

3. Our Operational time can be in Day as well as can be at night.

4. Can you please provide me the expense of device operated with Diesel and Gas.The primary combustion chamber is the major structure of the burner, produced from light steel plate and stiffened with rolled steel sections. It is carried from the floor level on a significant steel support structure. Internally the covering is lined with calcium silicate insulation and also a warm face combination of incredibly duty brickwork or high strength castable.
The key burning chamber should make sure minimum departure temperature level is not much less than 850 ° C
. One Hands-on Lots Incinerator making up:.
·???????? Guidebook Loading door.
·???????? Horizontal strong fireplace, refractory lined main combustion chamber. Approximate dimensions 800 mm sizes x 2100mm long.
·???????? Complete sized bulk load/ash elimination door.
·???????? 1 off diesel-fired ignition heater– temperature managed.
·???????? 1 off burning air supply follower as well as distribution system, automated control.
·???????? High capability additional burning chamber with residence time not much less than 2 secs @ >> 850 ° C. ·???????? 1 off diesel-fired afterburner– temperature managed.
·???????? Control panel– automated operation.
e????? Temperature indicator key and also secondary chambers 0-1200 ° C.
e????? Refractory lined flanged smokeshaft to a height of 10M over ground degree

nanjing clover incinerator price

Huge incinerators – – INDUSTRIAL INCINERATORS – – specs below.

2.) Dimension need for the burners is 750 — — 850 kg capability

3.) The bum rate need to be 80 LL 100 kg/ hour.

4) The key chamber shouId have an operating temperature level of 900 -1200 degree C.

5) The incinerator must despise a high temperature second chamber as well as 2 second gas
retention time at 850- 1150 degree C so that it appropriates for high threat materials.

6). The incinerator must have temperature level monitoring and thermostat control for ease of
operation and also guarantee of bottom temperature to validate right procedure.

7). The burner should be capable of shedding any of the hazardous wastes listed in the
subsequent area.

8) The burner should can burning diesel oil and also need to consist of a bigger gas
tank (10-500 litres) and also generator (3 –– 40 kV )established that can be carried on the trailer with the
incinerator to make sure that the device needs no exterior electrical power supply.

9.) The burner needs to be trailer mounted so that it is a po

Contaminated materials to be Incinerated

Unsafe strong chemical:

Different types of combustible solids, made use of textiles, oil, as well as toner cartridges, chemicals
for water purification and photo consumables and plastic product, vacant
plastic/metal cans that still contain remnant unsafe material, oil absorbing.

Harmful liquid chemical:

Generally various kinds. of Acid, Paint, Varnish, Acetone, White Spirit Aromatic-less
Solvents, Artificial Liquid for Break Solutions, Aircraft De-icing Fluid, Hydraulic as well as
Compressor oil, Freon, made use of in some older refrigeration systems, Pesticide liquid/spray, air
freshen spray and various other similar chemicals.

Polluted gas:
Mostly diesel or gasoline infected by water or solvents.

Used and/or Infected oil:

Made use of electric motor oils and/or mineral oils unfit for their originally meant use. Primarily electric motor
and also transmission oil (roughly 80%) polluted by a mix of white spirit and also acetone (about 51%), hydraulic fluid (about 5%).

Infected water:

Waste oilshvater, leaches, hydrocarbons/water blends, solutions and also leachate.

Polluted soil:

Soil contaminated by oil, gas or 11 chemicals.
Contaminated soil polluted by chemicals that needs to be reused in land fill.
Polluted dirt—— treated and replaced on website.

Oil Contaminated Solids
Rags, Absorbents, Cardboard, oil and also fuel filters, air filters are rule out as harmful materials.

Electronic waste:

Waste electric or digital home appliances or settings up, including printed circuit card,
containing toxic material and/or heavy metal and/or emitting low radiation.

Utilized battery cells:

Dry battery, UPS battery or other types, unsorted waste batteries/ battery cells, having
products that are hazardouy.

Utilized lead-acid batteries:
Waste lead-acid batteries, rained/un-drained, and entire or smashed.

Harmful clinical waste:

Professional and related waste, arising from clinical, nursing or similar techniques and also waste
generated in facilities throughout the investigation or therapy of individuals (bio danger).

Ran out medications, strong:

Waste drugs, drugs and also medications, consisting of delicate medicines.

Ended drugs Iiquid:

Waste liquid pharmaceuticals, various type fluid chemicals for therapy, medical
grease, as well as paraffin based xpired medicines.

Ran out and/or infected fod:

Spoiled fresh food or unusable MRE’s (Meal Ready for Consume – – dry food)

Onsite Training and also Assem Option for Industrial Incinerators

I. The prospective buyers ought to includ 1a rate in their deal for training in a central location (Goma or
Bukavu) approximately 15 personnel in the operation and upkeep of the
devices.

Smart Ash Incinerators

1. Size requirement for the burners is that the device collaborates with a 55 gallon open finished
steel drum.
2. The system should operate wit. no gas and also use just 120V or 220V electrical energy for the blowers.
3. The system needs to can melting oil polluted wastes and also medical wastes with a dampness material of 0-15% J.
4. Each device ought to include two steel drums, to ensure that a spare drum is available.

Spare Components Choice.
If there are any type of supplier suggested spare components, that list as well as cost ought to be consisted of as a choice in the deal.