Archive: July 7, 2026

waste

Medical Waste ncinerators for Hospital 10-500kgs per hour

Jul 7, 2026 by hiclover 0 Comments #Waste Incinerators

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate (Average) 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity(Average) 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chamber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Items/Model YD-30 YD-50 YD-100 YD-150
Burning Rate (kgs/Hour) 30 kgs/Hr. 50 kgs/Hr. 100 kgs/Hr. 150 kgs/Hr.
Feed Capacity (kgs) 60 kgs 150 kgs 200 kgs 300 kgs
Equipment Weight 2300 kgs 4000 kgs 5300 kgs 7000 kgs
Picture

Primary Chamber (Liters) 360 900 1200 1500
Secondary Chamber (Liters) 200 200 500 500
External Dimensions (cm) 145x90x175 200x160x230 220x180x360 240x170x380
Internal Dimensions (cm) 100x60x60 120x90x85 130x100x90 150x100x96
Oil Tank(Liters) 200 300 300 300
Door Opening (cm) 48 x 60 62 x 80 55 x 80 59 x 81
Chimney (M) 5 5 10 10
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chmaber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃
HICLOVER – Medical Environmental 
Items/Model YD-200 YD-300 YD-500 YD-600
Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr.
Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs
Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs
Picture

Primary Chamber (Liters) 2000 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 300 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chmaber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-08

waste

Essential FAQ on HICLOVER Waste Incinerators: Technical Insights and Economic Benefits

Jul 6, 2026 by hiclover 0 Comments

Essential FAQ on HICLOVER Waste Incinerators: Technical Insights and Economic Benefits

What are HICLOVER waste incinerators and their primary applications?

HICLOVER waste incinerators are advanced thermal treatment systems designed to effectively manage various types of waste by combustion. Specifically engineered for high performance, these incinerators operate within the required temperature range of 800 to 1,200 degrees Celsius, ensuring complete destruction of waste materials while adhering to industrial standards. Various applications include municipal solid waste disposal, medical waste management, and animal incineration. In regions like Gambia, these systems serve as reliable solutions for garbage disposal, contributing to improved public health and environmental compliance.

How do HICLOVER waste incinerators ensure compliance with regulations?

Compliance with local and international regulations, including those set by the World Health Organization (WHO) and the European Union (EU) emission frameworks, is a critical feature of HICLOVER waste incinerators. The systems utilize dual combustion chambers, which enhance combustion efficiency and reduce harmful emissions. This design allows for high-temperature retention, leading to complete combustion of hazardous waste, including medical waste, which is vital for protecting public health.

What are the key features of HICLOVER waste incinerators?

HICLOVER waste incinerators boast several features that enhance their efficiency and adaptability:

  • Dual combustion chambers: This system ensures that waste is fully incinerated, minimizing harmful emissions.
  • High-temperature operation: Operating at temperatures between 800 and 1,200 degrees Celsius facilitates the complete breakdown of various waste types.
  • PLC automation: Programmable Logic Controller (PLC) systems are incorporated for precise operation and monitoring, enhancing efficiency and reducing manual intervention.
  • Flexible fuel options: These incinerators can operate on multiple fuels, including diesel, LPG, and natural gas, making them versatile for different operational conditions.

What is the cost-effectiveness of HICLOVER waste incinerators?

The initial investment in a HICLOVER waste incinerator can be substantial, but the long-term economic benefits are significant. The operational efficiency leads to lower waste management costs over time. For instance, in areas like Kenya, where animal waste management can be costly, these systems provide a more sustainable and economical solution. Additionally, HICLOVER’s engineering expertise allows for customizable chamber volumes that can be tailored to specific waste streams, maximizing return on investment (ROI).

How do HICLOVER waste incinerators compare to traditional waste management methods?

Traditional waste management methods often include landfilling and open burning, which can lead to soil and air pollution. In contrast, HICLOVER waste incinerators offer a cleaner, more efficient alternative. The combustion process not only reduces waste volume significantly—by up to 90%—but also generates energy that can be recovered and used for other applications. This aspect is particularly relevant in crisis zones and humanitarian camps, where energy recovery systems are crucial for operational sustainability.

What are the options available for HICLOVER waste incinerators?

HICLOVER offers various configurations to meet different operational needs:

  • Containerized modular systems: These systems are designed for easy transport and deployment, making them ideal for remote locations or emergency scenarios.
  • Fixed vs. containerized options: Choosing the right type depends on the site requirements; fixed installations are suitable for consistent waste generation, while containerized units can be deployed where needed.
  • Scrubber options: Clients can choose between wet or dry scrubbers based on their specific emission control needs, further enhancing environmental compliance.

What are the benefits of modular incineration systems?

Modular incineration systems, such as those provided by HICLOVER, offer numerous advantages. Their mobile plug-and-play design allows for quick setup and operational readiness, which is particularly beneficial in disaster recovery situations or for temporary waste management in humanitarian camps. Moreover, the flexibility in scaling operations up or down can directly impact cost savings, as organizations can adjust capacity based on fluctuating waste volumes.

What is the importance of remote site suitability in HICLOVER incinerators?

In regions such as Somalia, where access to waste management infrastructure is limited, HICLOVER waste incinerators provide an essential service. Their design accommodates remote site suitability, making it possible to deploy waste management solutions effectively in challenging environments. This adaptability is crucial for supporting global infectious disease preparedness by ensuring that medical waste is managed safely and effectively in any location.

How does HICLOVER ensure a stable supply chain for its products?

A stable supply chain is vital for the procurement of industrial equipment. HICLOVER leverages its extensive engineering experience and factory manufacturing capabilities to ensure consistent product availability. This approach minimizes delays in delivery and guarantees that clients receive high-quality, tested equipment. Additionally, HICLOVER’s global export capability means that customers in regions like Namibia and Cameroon can access advanced waste management solutions without the uncertainties associated with trading companies.

What are the expected operational costs associated with HICLOVER waste incinerators?

The operational costs of HICLOVER waste incinerators vary based on several factors, including fuel type, waste composition, and local operational conditions. Generally, the multi-fuel capability allows organizations to seek out the most cost-effective fuel options available in their region, such as LPG or diesel. Furthermore, the efficiency of the incinerators reduces the frequency of maintenance and operational downtime, contributing to long-term economic viability.

Where can I find more information about HICLOVER waste incinerators?

For detailed specifications, product offerings, and technical support, visit the HICLOVER website. Their comprehensive resources assist procurement managers and decision-makers in making informed decisions regarding waste management solutions.

Can HICLOVER incinerators assist with ESG compliance?

Environmental, Social, and Governance (ESG) compliance is increasingly important for organizations worldwide. HICLOVER waste incinerators contribute significantly to ESG goals by minimizing carbon emissions and promoting sustainable waste reduction practices. The dual combustion chamber design and advanced filtration systems help meet stringent emission standards, reinforcing a commitment to environmentally responsible operations.

What are the return on investment (ROI) metrics associated with HICLOVER waste incinerators?

Calculating ROI involves evaluating both direct and indirect benefits. Directly, companies can save on waste disposal costs and potentially generate energy from waste incineration. Indirectly, improved community and environmental health can lead to better public relations and a more favorable operating environment. The investment in HICLOVER waste incinerators not only fulfills regulatory requirements but also positions an organization as a leader in responsible waste management.


waste

small scale incinerator

Jul 5, 2026 by hiclover 0 Comments #Waste Incinerators

Incinerators Biological waste disposal system (incinerator)

Incinerator must meet the following specifications:

–       Combustion capacity (kW) = 581 +/-10%

–       Combustion capacity (kcal/h) = 500,000 +/-10%

–       Max. l/h (at approx.. 50% water content) = 100 +/-10%

Further specifications will be provided with the inquiry.

The incinerator shall be fully self contained.

The incinerator plant shall incorporate a control panel for its operation. On the control panel we shall have a visual display of the chamber temperatures. This visual display must control and monitor the incinerator and his performance.

Capacity of destruction in weight shall be 60 Kg/h.

It should be able to operate not less than 10 hours/day

This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…

Design Specification : Types A, B, C, D, and E of medical waste

“PYROLYTIC” combustion, by controlling the gasification of waste.

The incinerator must avoid the release of black smoke and fine dust, during the loadings.

It shall be able to reduce the volume of wastes by 98%.

It shall be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

1.0The primary ignition burner shall providing ignition of the waste to 850 °C and must switch off to conserve fuel.

The primary combustion chamber shall be constructed from heavy steel plate and the unit is internally lined with a complete layer of hote face refractory and high efficiency insulation.

The Internal diameter of the Chimney at least: ? 400 and its height: 8 m

The Volume of the combustion chamber at least: 1.200 L

The Dimension of the door for loading in cm at least: 70×70.

Burner operation should be Automatic On/Off
Fuel?: diesel

Manufacturer to provide  necessary information for the best of  the installation

The control panel shall have all appropriate audible and visual alarms to ensure safe operation.

This incinerator with “PYROLYTIC” combustion must have:
1.A combustion chamber of waste:
oPerfectly tight door for the manual loading of waste. The loading should be Manual, Batch Load
oA burner of lighting which the use is limited to the ignition of waste.
oFrontage of loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.
oThe insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet metal.
o Composition of the refractory;

?Refractory concrete :
. Thickness    : ≥100 mm
. Nature: 42% of Al203
?Insulate in fibrous panels :
Thickness: ≥75 mm
Nature: Calcium silicate.
?Burner of lighting of waste, with fuel, standard mono-bloc casting guiding  plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
Plate of combustion in Carborundum, avoiding the fixing of glass and slags

A chamber of post combustion of gases
oA burner of combustion of gases,
oA device of injection of air allowing a total recombustion of gases,
oA device of air inlet of cooling of waste gases,
oA sheath of evacuation of the gases burnt.
oCarcass in strong sheet steel with support of connection.
oComposition of the refractory;
?Refractory concrete :
?Thickness    : ≥150 mm
?Nature: 65% of Al203
?Insulate in fibrous panel :
?Thickness: ≥85 mm
? Nature: Calcium
oBurner with fuel, mono-bloc casting guiding type with horizontal flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
oA secondary injection of air to ensure perfect oxygen content.

A control box ensuring the complete cycle of combustion.

Fan:
oElectro-ventilator distributing the secondary air, the regulation of the air flow being carried out by valves and following the control of the automatic cycle.
Controls and regulations:
Control box watertight to dust, including:

A switch circuit breaker for each engine (ventilators and burners).
A timer with adjustable temporization for the regulation of each burner.
A regulator with digital watching for the temperature of combustion.
A regulator with digital watching for the temperature of post combustion.
Electric box

The secondary combustion chamber must destroy the contaminant product and must resist to high temperature(1100 °C)

Process Filtering system: Scruber to be mentionned as optional

waste

SMOKELESS INCINERATOR

Jul 4, 2026 by hiclover 0 Comments #incinerator, #medical waste, #waste


THE SMOKELESS INCINERATOR FOR INDUSTRIAL PURPOSE, IN LAGOS NIGERIA
WE WANT TO KNOW THE CAPACITY OF THE EQUIPMENT, HOW MUCH LOAD OF WASTE CAN IT BURN AT A PARTICULAR TIME AND FOR HOW LONG, AND THE TYPE OF ENERGY REQUIRED FOR THE OPERATION. PRICE INCLUDING SHIPMENT
for the destruction of the followings:
Polyester, polypropylene, polystyrene, vinyl acetate plastic, synthetic plastics,
natural rubber, synthetic rubber, polyurethane sheet, and bulky films, solids and
– particles that can be easily sorted
– Items that easily degenerate such as paper, wood, leather and garbage
– Chemical waste solids and liquids, waste oil and other difficult-to-handle items



waste

Hospital Medical Waste Incinerators

Jul 4, 2026 by hiclover 0 Comments #Waste Incinerators
Model Capacity/Burnning Rate For Hospital SickBed No. Fuel Type Qty. Ready for Shipping New Production  Shipping Volume Shipping Weight Delivery Location
TS30 average 30kgs per hour Average 150 SickBed Diesel Oil 1 set 5 days 20sets/2 weeks 5 m3 3000 kgs Shanghai Port
TS50 average 50kgs per hour Average 250 SickBed Diesel Oil 1 set 7 days 20sets/2 weeks 7m3 4500 kgs Shanghai Port
TS100 average 100kgs per hour Average 500 SickBed Diesel Oil 1 set 7 days 15sets/2 weeks 10m3 6000 kgs Shanghai Port
TS150 average 150kgs per hour Average 750 SickBed Diesel Oil 5 sets 7 days 15sets/2 weeks 13m3 7500 kgs Shanghai Port
YD10 average 10kgs per hour Average 50 SickBed Diesel Oil 2sets 7 days 20sets/2 weeks 3m3 1200 kgs Shanghai Port
YD20C average 20kgs per hour Average 100 SickBed Diesel Oil 2sets 7 days 20sets/2 weeks 6m3 2000 kgs Shanghai Port
YD50C average 50kgs per hour Average 250 SickBed Diesel Oil 2sets 7 days 20sets/2 weeks 7m3 2300 kgs Shanghai Port
YD30 average 30kgs per hour Average 150 SickBed Diesel Oil 1 set 5 days 20sets/2 weeks 5m3 2300 kgs Shanghai Port
YD30 Small average 30kgs per hour Average 150 SickBed Diesel Oil 2sets 5 days 20sets/2 weeks 3m3 1500 kgs Shanghai Port
YD50 average 50kgs per hour Average 250 SickBed Diesel Oil 2 sets 5 days 20sets/2 weeks 8m3 4500 kgs Shanghai Port
YD100 average 100kgs per hour Average 500 SickBed Diesel Oil 1 set 10 days 15sets/2 weeks 13m3 6000 kgs Shanghai Port
YD150 average 150kgs per hour Average 750 SickBed Diesel Oil 1 set 10 days 15sets/2 weeks 17m3 7500 kgs Shanghai Port
YD300 average 300kgs per hour Average 1500 SickBed Diesel Oil 10sets/2 weeks 20m3 9000 kgs Shanghai Port
YD500 average 500kgs per hour Average 2500 SickBed Diesel Oil 5sets/2 weeks 27m3 13000 kgs Shanghai Port
CA 50 Mobile Containerized average 50kgs per hour Average 250 SickBed Diesel Oil 2 sets 15 days 10sets/2 weeks 28m3 7000 kgs Shanghai Port
HICLOVER – Medical Environmental 

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-08

waste

Incinerador de Residuos Médicos HICLOVER en Suministro (Terminado, Semiacabado y Nueva Producción).

Jul 3, 2026 by hiclover 0 Comments #Español
Modelo Capacidad / Tasa de quemado Para Hospital SickBed No. Tipo de combustible Cant. Listo para enviar Nueva producción Volumen de envío Peso de envio Lugar de entrega
TS30 promedio de 30 kg por hora Promedio 150 Enfermería Gasóleo 1 juego 5 dias 20sets / 2 semanas 5 m3 3000 kilogramos Puerto de Shanghai
TS50 promedio de 50 kg por hora Promedio 250 camas enfermas Gasóleo 1 juego 7 días 20sets / 2 semanas 7m3 4500 kilogramos Puerto de Shanghai
TS100 promedio de 100 kg por hora 500 camas promedio Gasóleo 1 juego 7 días 15sets / 2 semanas 10m3 6000 kilogramos Puerto de Shanghai
TS150 promedio de 150 kg por hora Promedio de 750 camas para enfermos Gasóleo 5 juegos 7 días 15sets / 2 semanas 13m3 7500 kilogramos Puerto de Shanghai
YD10 promedio de 10 kg por hora Promedio 50 camas enfermas Gasóleo 2 juegos 7 días 20sets / 2 semanas 3m3 1200 kilogramos Puerto de Shanghai
YD20C promedio de 20 kg por hora Promedio de 100 camas Gasóleo 2 juegos 7 días 20sets / 2 semanas 6m3 2000 kilogramos Puerto de Shanghai
YD50C promedio de 50 kg por hora Promedio 250 camas enfermas Gasóleo 2 juegos 7 días 20sets / 2 semanas 7m3 2300 kilogramos Puerto de Shanghai
YD30 promedio de 30 kg por hora Promedio 150 Enfermería Gasóleo 1 juego 5 dias 20sets / 2 semanas 5m3 2300 kilogramos Puerto de Shanghai
YD30 pequeño promedio de 30 kg por hora Promedio 150 Enfermería Gasóleo 2 juegos 5 dias 20sets / 2 semanas 3m3 1500 kilogramos Puerto de Shanghai
YD50 promedio de 50 kg por hora Promedio 250 camas enfermas Gasóleo 2 juegos 5 dias 20sets / 2 semanas 8m3 4500 kilogramos Puerto de Shanghai
YD100 promedio de 100 kg por hora 500 camas promedio Gasóleo 1 juego 10 días 15sets / 2 semanas 13m3 6000 kilogramos Puerto de Shanghai
YD150 promedio de 150 kg por hora Promedio de 750 camas para enfermos Gasóleo 1 juego 10 días 15sets / 2 semanas 17m3 7500 kilogramos Puerto de Shanghai
YD300 promedio de 300 kg por hora Promedio 1500 camas para enfermos Gasóleo 10sets / 2 semanas 20m3 9000 kilogramos Puerto de Shanghai
YD500 promedio de 500 kg por hora Promedio 2500 camas para enfermos Gasóleo 5sets / 2 semanas 27m3 13000 kilogramos Puerto de Shanghai
CA 50 Móvil en contenedores promedio de 50 kg por hora Promedio 250 camas enfermas Gasóleo 2 juegos 15 días 10sets / 2 semanas 28m3 7000 kilogramos Puerto de Shanghai
1. Información Cambio de alta frecuencia, solo como referencia.
2. Precio como cotización formal y detalles técnicos y plazo comercial

HICLOVER – Ambiental médico  
Incineradores de residuos
Incinerador de desechos médicos
Cremación de animales domésticos
Residuo sólido   Incinerador

Tel: + 86-25-8461 0201
Móvil: + 86-13813931455 (whatsapp / wechat)
Sitio web: www.hiclover.com
Correo electrónico: [correo electrónico protegido]
Correo electrónico: [correo electrónico protegido]
Tecnología médica Co., Ltd. del trébol de Nanjing

2020-03-29

waste

animal incinerators for sale

Jul 2, 2026 by hiclover 0 Comments #Waste Incinerators

SMART ASH INCINERATORS FOR THE DISPOSAL OF HAZARDOUS WASTE
?    Quantity: 20 units
?    The Incinerator works with a 55 gallon open ended steel drum
?    The unit operates without fuel and used only 120v or 220v electricity for the blowers
?    Unit is capable of burning oil contaminated waste and medical wastes with a moisture content of 0 to 15%
?    Each unit is supplied with two steel drums, so that a spare is available
?    Each unit to be supplied with recommended spare parts
?    Warranty – minimum 12 months from receipt and acceptance
?    Instruction manuals to be provided in French and English

HAZARDOUS WASTE TO BE INCINERATED

Hazardous Solid Chemicals
Different types of combustible solids, used textiles, grease and toner cartridges, chemicals for water purification and  photographic consumables, and plastic material, empty metal/ plastic cans that still contain remnants of hazardous materials, oil absorbent

Hazardous Liquid Chemicals
Mainly different types of Acid, Paint, Varnish, White Spirit, Aromatic-Less Solvents, Synthetic Liquid For Brake Systems, Aircraft De-icing Liquid, Hydraulic And Compressor Oil, Freon used in some older refrigeration units, Insecticide Liquid/Spray, Air Refresh Spray and other similar chemicals

Contaminated Fuel
Mainly diesel or gasoline contaminated by water or solvents

Used and/or Contaminated Oil
Used motor oils and/or mineral oils unfit for their originally intended use. Mainly motor/gear box oil (approx. 80%) contaminated by a  mixture of white spirit and acetone (approx. 5%) hydraulic liquid (approx 5%)

Contaminated Water
Waste oils/water, leaches, hydrocarbons/water mixtures, emulsions and leachate

Contaminated Soil
Soil polluted by oil fuel of chemicals,
Soil polluted that has to be recycled in landfill,
Soil treated and replaced on site

Oil Contaminated Solids
Rags, absorbents, cardboard, oil and fuel filters, air filters are not considered as hazardous materials

Electronic Waste
Waste electrical or electronic appliances or assemblies, including printed circuit boards containing toxic material and/or heavy metal and/or emitting low radiation

Used Battery Cells
Dry battery, ups battery or other types unsorted waste batteries/battery cells, containing materials that are hazardous

Used Lead Acid Batteries
Waste lead acid batteries, drained/ un-drained and whole or crushed

Hazardous Medical Waste
Clinical and related waste arising from medical, nursing or similar practices and waste generated in clinics during the investigation or treatment of patients (bio hazard)

Expired Drugs Solid
Waste pharmaceuticals, drugs and medicines, including sensitive medicines

Expired Drugs Liquid
Waste liquid pharmaceuticals, different type liquid chemicals for treatment, medical grease and paraffin based expired medicines

Expired and/Or Contaminated Food
Spoiled fresh food or unusable meal ready to eat meals (MRE’s) dry food

waste

Medical Incinerator

Jul 2, 2026 by hiclover 0 Comments #animal cremation, #hazardous waste, #hazardous waste incinerator, #hospital waste, #incineration, #incinerator, #incinerator manufacture, #incinerator manufacturer, #incinerators, #medical waste, #nanjing clover medical technology, #waste, #waste-incinerator


Basic Info.

Model NO.:pet cremation equipment
Export Markets:Global

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, autocombustion incinerator" hospital waste, "hazardous waste incinerator" manufacturer, "pet cremation equipment" manufacturer, 100kg incinerator, 150kg capacity incinerator, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 

Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock. 

Application Scope: 
1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. 
2. Slaughter House &Pet Hospital &Farm: Dead Animal, Bio-Waste. 
3. Community & Sea Port & Station: Municipal Solid Waste, etc. 
4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

waste

Medical waste incinerator 100kgs Model TS100

Jul 1, 2026 by hiclover 0 Comments #Waste Incinerators
incinerator manufacturer,medical incinerator,small scale incinerator,oil fired incinerator

Items/Model

TS100

Burn Rate

Average 100 kg/hour

Feed Capacity

Average 200 kg/feed

Control Mode

PLC

Combustion Chamber

1200L

Internal Dimensions

120x100x100cm

Secondary Chamber

600L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

0.7Kw

Oil Consumption (kg/hour)

14–28

Gas Consumption (m3/hour)

10–32.2

Temperature Monitor

Yes

Temperature Protection

Yes

Oil Tank

200L

Feed Door

80x60cm

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800℃–-1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

6000kg

External Dimensions

260x150x180cm


HICLOVER – Medical Environmental 

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-06