Archive: November 19, 2024

HS Code for waste incinerator 84178050

HS Code for waste incinerator 84178050

Item

Specification

Model

TS100 PLC

Main Product List per 01 set

Primary Combustion Chamber

 

Secondary Combustion Chamber

 

Smoke Filter Chamber

 

Incinerator PLC Control Case

 

Chimney:10.0Meters

*(upgrade to Stainless Steel, free cost)

 

Italy oil/gas burner: 02 units

 

Oil Tank (if oil fuel): 200Liters

 

 

Optional Part: Stainless Steel Wet scrubber

RWANDA medical waste incinerator for sale

municipal waste incinerators RWANDA


HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators, 
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator(Containerized Mobile Incinerator)

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.



 

2020-07-07

Numerous Sorts Of Burners


contaminated materials high temperature burners for the treatment of contaminateds materials. The waste will definitely be blended, including medical, oily wastes, woods as well as lab wastes. Key burning
Diesel/LPG/LNG burning primary burning chamber/primary burning location
Extra burning
House time in the second chamber very little less than 2 secs
Both primary and also the second temperature level degrees protected till all the waste has actually been entirely combusted
Chimney
Smokeshaft with a minimal altitude of 4 meters above ground level
Minimum leave rate of the discharges not less than 10 metres/second
Temperature level Cautions
Unique and/or obvious alarm to caution the vehicle driver when the additional temperature degree drops to below the called for temperature level
General
Control box that can be separated and positioned on separate stand at the very least 1.5 meters from incinerator at around 1.6 meter height

Burner variation A.
Burn Price 65kg/h minimum.
Weight (kg), please suggest:.
Second Chamber.
Gas Retention Time – – – – 2 Seconds. Power Supply – for – Control Box – 220V-240V 50Hz solitary phase.
10m Tube Pipeline, suggest size. I000 Litre Gas Container+ Pipeline System, show volume. Included smokeshaft expansion
, indicate elevation. Service warranty, recommend no of years

Heater style B. Burn Price 150kg/h minimum.
Gas Retention Time – – 2 Secs. Diesel/LPG/LNG, please indicate. Minimum operating temperature level 920 ° C, please suggest.
10m Pipeline Pipeline, show dimension. I000 Litre Gas Container+ Pipe System, reveal quantity. Extra smokeshaft growth, show elevation.
Guarantee, reveal no of years

Heater variation C.
Burn Rate 250kg/h minimum.
Weight (kg) please indicate:.
2nd Chamber.
Gas Retention Time 2 Secs.
Fuel Diesel/LPG/LNG, please program.
Power Supply for Control Box 220V-240V 50Hz solitary phase.
Minimum running temperature 920 ° C, please show.
One year Spare Parts Package for total maintainability.
10m Tube Pipe, recommend length.
I000 Litre Gas Container + Pipe System, reveal amount.
Added smokeshaft growth, reveal elevation.
Service guarantee, suggest no of years

Whole lot 4– – High Temperature Waste Incinerator.
HTW Incinerator layout D. Burn Cost – – 150kg/hour minimum.
Weight (kg), please show:.
Additional Chamber.
Gas Retention Time 2 Seconds.
Gas Diesel/LPG/LNG, please indicate.
Power Supply for Control Box 220V-240V, single stage 50-60Hz.
Minimum operating temperature level 1200 ° C, please show.
One year Spare Elements Plan for overall maintainability.
10m Hose pipe Pipeline, show length.
1000 Litre Gas Storage Tank + Pipe System, suggest volume.
Additional smokeshaft development, suggest elevation.
Service warranty, reveal no of years

Great deal 5– – Mobile Burner.
Mobile Incinerator version E. Burn Price 50kg/h minimum. Weight (kg), please show:.
Gas – Retention Time – – 2 Seconds. Gas – Diesel/LPG/LNG, please show. Minimum running temperature level 850 ° C, please suggest.
Assurance, suggest no of years

Lot 6– – Mobile Incinerator.
Mobile Heater design F. Burn Price 100kg/h minimum. Weight( kg), please recommend:.
Extra Chamber.
Gas Retention Time – – – – 2 Secs. Gas – Diesel/LPG/LNG, please suggest –. Power Supply – for – Control Box – 220V-240V 50Hz single stage. Minimum running temperature 850 ° C, please suggest. One year Spare Elements Package for full maintainability.
10m Tube Pipe, suggest length.
1000 Litre Fuel Storage Tank + Pipeline System, suggest quantity.
Additional smokeshaft growth, suggest altitude.
Assurance, show no of years

Good deal 7– – Heat Waste Mobile Burner.
HTW Mobile Incinerator style G.
Burn Rate 100kg/h minimum.
Weight (kg), please indicate:.
2nd Chamber.
Gas Retention Time – – – – 2 Secs. Gas – Diesel/LPG/LNG, please indicate. Power Supply for Control Box – – – – 220V-240V 50Hz solitary stage.
Minimum operating temperature 1200 ° C, please show.
One year Spare Parts Prepare for total maintainability.
10m Tube Pipeline, suggest size.
1000 Litre Gas Tank + Pipe System, show amount.
Additional chimney extension, recommend altitude


MEDIUM-CAPACITY ANIMAL CARCASS INCINERATOR HICLOVER Model TS100(PLC)

MEDIUM-CAPACITY ANIMAL CARCASS INCINERATOR HICLOVER Model TS100(PLC) with wet scrubber optional

Items/Model

TS100(PLC)

Picture

 

Principle

Waste Incineration Treatment(Poultry and dead fish

Incinerator Machine)

Burn Rate

Average 50-100 kg/hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

970L

Internal Dimensions

120x90x90cm

Secondary Chamber

480L

Smoke Filter Chamber

Yes(Dry Scrubber)

Feed Mode

Manual

Voltage

220V-240V

Power

0.7Kw

Oil Consumption (kg/hour)

average 20.4

Gas Consumption (m3n/hour)

average 24.5

Temperature Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

200L

Feed Door

100x80cm(Top Loading)

Chimney

10Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800–1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

7000kg

External Dimensions

260x150x180cm

This is a product specification of Poultry and dead fish

Incinerator Machine incinerator, ideal for the disposal of sheep, poultry and pet animal carcasses.

This incinerator should be designed for the incineration of:

 

・ Poultry carcasses

・ Larger sized pet animal carcasses

・ Farm shop and abattoir waste

・ Dead fish

 

Incinerator should be compact, fuel efficient and easy to run, designed to achieve its optimum incineration temperature quickly.

 


 

 

Fuel use options:

LPG or natural gas or diesel oil.


Mounting: -floor mounted

 

8.1 Factory Specifications

top-loading incinerator with a lift-opening lid, providing clear access for ease of manual or mechanical loading. All controls should be placed away from the loading area to avoid damage by loading machinery. Burn program should be available and the incinerator should be left unattended until the carcass reduces to ash.

It should be highly efficient, utilizing automatic high heat-rate burners, low thermal mass linings and timer controls that ensure minimal running costs; a thermostat triggers burner shut-off when optimum temperatures are reached, increasing fuel efficiency significantly.

Burn rate should be up to 50-100kg per hour , 220-240-volt electricity & fuel supply. A comprehensive operating, care & maintenance manual should be provided with each incinerator.

 

Chamber Volume  0.97m3

Load Capacity Up to 400kg

Load Method Top

Fuel Options diesel oil or natural gas or lpg type

Odour control should be provided with the incinerator, dry scrubber. Wet scrubber optional.


HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators, 
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator(Containerized Mobile Incinerator)

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.



 

2020-07-07

incineradores de animales grandes

El incinerador también estará equipado con dispositivos de carga especiales y mecanismos que permitan la incineración segura de

residuos sólidos simultáneamente con lodos líquidos. La carga de residuos sólidos se puede lograr a través de bolsas.

Todas las tuberías intermedias, fuelles y otros accesorios para la conexión entre los tanques.

, el quemador, el compresor y otros equipos suministrados en la plataforma serán suministrados por el adjudicatario. El licitante deberá

indicar puntos de conexión para lodos, OD y agua caliente. Las conexiones a estos puntos de conexión estarán a cargo de

la CEB. Todo el equipo, como bombas, ventiladores, compresores, etc., que formen parte del lote del incinerador deberá llevar

su suministro eléctrico desde un panel eléctrico. El panel debe estar equipado con disyuntores adecuados.

y contactores para cada componente y debe permitir el candado independiente del equipo por operadores sin

interviniendo desde el interior del panel. Todos los trabajos de candado se realizarán desde el exterior del cuadro eléctrico. La

El cuadro eléctrico se alimentará de un suministro trifásico externo.

2.4 Cuadro eléctrico

La tensión nominal del panel será de 415 Vca y su tensión nominal de aislamiento será de 1000 Vca.

– El compartimento principal se alimentará desde un cuadro de distribución existente.

El panel debe ser ensamblado en fábrica, revestido de metal y tipo extraíble en diseño para aplicación en exteriores.

установка для сжигания клинических отходов дизельного топлива

дизельная горелка для медицинских отходов Цена сжигания: 47,5––50 кг / час.
Минимальная рабочая температура: 850 o C (ключевое горение).
Оптимальный уровень рабочей температуры: 1450 oC (камера дожигания).
Вторичная горящая способность: обязательная.
Толщина изоляции: 20 мм.
Огнеупорное литье: минимум 65 мм.
Прочная преломляющая футеровка, выдерживающая: 1500 oC.
Типичное время выгорания: максимум: 3 человеческих ресурса.
Тип топлива: Дизель.
Расход газа в л / час: от 7,5 до 9.
Время пребывания в дополнительной камере: 2 сек.
Сообщение в блоге об остатках золы 100 кг: не более 3,8 кг.
Устройство для защиты от передаваемых брызг и / или перекрестного загрязнения путем надежной дезинфекции игл, колец и т. Д. С помощью инфракрасного излучения.
Электрические характеристики.
1) Однофазный источник питания 120 В, 60 Гц с линейной вилкой типа NEMA 5-15.
2) Защита от перенапряжения и перегрузки по току в линии.
3) Соответствие действующим гаитянским стандартам и нормам.

Эксплуатационные качества.
4) Быстрая полная стерилизация примерно за 5-7 с.
5) Полностью изолированная кварцевая / керамическая трубка для обеспечения безопасности человека (отсутствие открытого огня).
6) Рабочий температурный уровень около 820 ° C.
7) Устанавливается на устойчивой основе, как показано ниже.

resilient and extremely efficient heaters with different capacities for hospital/medical waste, cremation as well as additionally various other solid waste therapies


Single and also Double Chamber Medical Incinerator.durable and incredibly dependable burners with numerous capacities for hospital/medical waste, cremation in addition to numerous other solid waste therapies.

Chamber Dual

Burning Rate 10 kg per hour (for 2 incinerators)

Burning Price 20 kg per hr (for three heaters)

Packing Method Manual

No of Burners Solitary for 10 kg/hour and Double for 20 kg per human resources

Gas Diesel and likewise Natural Gas

Heat Up Time Not above 20 mins

Temperature controller Digital

Power Supply Single Phase 220V

Smokeshaft Altitude 20 feet from ground degree

· 50kg per hr

· Option for medical waste.

Kind
Singular Chambered Round

Feed Product
Files, Containers wastes

Capability
1000 Kg/Day

Burning Capacity
125 Kg/hr

Format Standards
Normally validating to IS Standards

Sort of melting procedure
Absolutely No Gas System

Burning Chamber

Kind
Cylindrical

Measurement
1.25 m Dia (Approximate) x 1.2 m Elevation (Approx)

Temperature Degree
400– – 600 ° C

MOC
Chrome Alloy Steel, inside lining with fire bricks/Ceramic Clay

Outer Lining
Thermal Proof Cellular Lining

HEAP

Type
Self Sustained

MOC
MS

Devices
Port Opening as well as Ladder for exhaust screening with complete online massaging system, thermostat

The systems will be made use of for our consumer camps in the field.


30 kgs medical waste incinerators for covid19 waste



Q: what is kind of waste can use in this equipment?

A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste.

Items/Model

TS30(PLC)

Burn Rate

Average 30 kg/hour

Feed Capacity

Average 60kg per feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

330L

Internal Dimensions

75x75x60cm

Secondary Chamber

180L

Smoke Filter Chamber

Yes

Feed Mode

Manual Feeding

Voltage

220V

Power

0.5Kw

Oil Consumption (kg/hour)

Average 13.3

Gas Consumption (N.G, m3n/Hour)

Average 16

Gas Consumption (L.P.G, m3n/Hour)

Average 11.7

Temperature Monitor

Four Digital Display

Temperature Protection

Yes

Oil Tank

200L 

Feed Door

55x50cm

Chimney

5Meter 

Chimney Type

Stainless Steel

1st. Chamber Temperature

800–1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

3000kg

External Dimensions

175x120x140cm


HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators, 
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators

HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator(Containerized Mobile Incinerator)

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.



 

2020-07-06

An Unexpected Ebola Infrastructure Problem: Waste



Patients with this debilitating virus produce 440 gallons of medical waste daily, including instruments, gowns, gloves, body fluids, sheets, mattresses and more. That’s a substantial amount of medical waste in any situation, but it’s especially daunting in this case because it needs to be disposed of extremely cautiously, to avoid the risk of spreading infection. What do you do with a problem like Ebola waste? Because you don’t want to toss it in the garbage.

Somewhat surprisingly, says Bausch, the United States actually faces bigger problems when it comes to safely disposing of Ebola waste, which is simply burned in large pits in Africa: “In the United States, of course, we are somewhat beholden to higher tech solutions, which in some ways are a little bit more problematic in terms of treating all that waste, and we need autoclaves or incinerators that can handle that sort of thing. It’s not the actual inactivation that’s particularly difficult; it’s just the process of getting the waste from, of course, the frontline of care and interaction with the patients safely to the place where it can be incinerated or autoclaved.”

The problem in the United States is ironically compounded by the increased access to medical care, and the higher quality of medical services, available. In the United States, patients are treated by medical teams with access to a huge volume of supplies they use for protection, including masks, gowns, booties, and gloves, along with sanitizers and other tools. Moreover, patients receive extensive medical interventions that generate waste like needles, tubing, medical tape, empty IV bags, and more. The very care that has helped most of the handful of Ebola patients in the United States conquer the disease has contributed to the huge amount of waste generated, highlighting a critical hole in U.S. medical infrastructure — while African hospitals may have lacked the supplies and personnel needed to supply aid to Ebola patients, they’re at least prepared to handle the waste.

The CDC just issued guidelines to help clinicians and administrators decide upon how to handle Ebola waste, but The New York Times notes that many facilities don’t have the autoclave, and incinerator, capacity to handle medical waste on this scale. Some states prohibit the burning of medical waste altogether, or have barred incineration of Ebola waste, leading to the transport of waste across state borders to facilities that can handle it, which poses its own risks; with every mile added to transport, there’s a greater risk of spreading disease to previously unexposed communities.

Surprisingly, defenders of burning the waste come from surprising corners. Environmentals like Allen Hershkowitz, National Resources Defense Council senior scientist, point out that: “There’s no pollutant that’s going to come out of a waste incinerator that’s more dangerous than the Ebola virus. When you’re dealing with pathogenic and biological hazards, sometimes the safest thing to do is combustion.”

The argument in defense of incineration can be bolstered by the fact that medical waste companies specialize in high-efficiency incineration with equipment designed to minimize and trap byproducts of combustion, reducing overall pollution considerably. Fears about Ebola, rather than genuine environmental or public health concerns, are driving the decision to push against incineration of ebola waste in many regions, but eventually, the United States is going to have to face facts: The mounting waste that accumulates in facilities where Ebola patients receive treatments needs to be disposed of safely, and promptly.

 

by: http://www.care2.com/causes/an-unexpected-ebola-infrastructure-problem-waste.html



горелка для медицинских отходов

установка для сжигания медицинских отходов: медицинские отходы и общие отходы
Мощность сжигания отходов: 400-500 кг / час
Топливо: Дизель
Расход топлива: не более 10 литров / час.
Температура сжигания: 950 – 1300 ° C
Корпус: толстый (мин. 5 мм) Корпус из нержавеющей стали и полностью
изолирован, чтобы выдерживать морскую влажность
Напряжение: 220/240 В или 380/415 В
Частота: 50 Гц
Кормление: автоматическое
Удаление остатков золы 1: Автоматически
Система фильтрации топливного газа: Да
Гарантия: 12 мес.
Обучение персонала: оператор и обслуживающий персонал
Руководства по эксплуатации и обслуживанию: по 3 комплекта
Конструкция с полкой из листовой стали Especifica? Es Gerais 6 мм.
Огнеупорная футеровка 11см 1400 ° C
Горелки с регулируемой температурой
горелки вторичного горения
выключатель блокировки на грузовых дверях
отдельная дверь ясеня
одна вторичная резиденция при 1000 ° C
Финишная краска на силиконовой основе 400 ° C
датчик температуры сплава
на заводе подключены и протестированы
Производительность 20 кг / час
первичная камера 1607 л
Площадь пода 1,36 кв.м
Вторичная камера 694L
Первичная горелка (жидкое топливо) 420.00 БТЕ
Вторичная горелка (жидкое топливо) 900000 БТЕ
Вторичное сгорание 1/6 л.
Вытяжная труба 46см х 6м
Электрообслуживание 220/50
Вес системы 5700 кг
Размер «D» 152 см.
Высота порта Doad 60×60см
Высота пепельницы e 36×36см
Общие характеристики Конструкция с полкой из листовой стали толщиной 6 мм
Огнеупорная футеровка 11см 1400 ° C
Горелки с регулируемой температурой
горелки вторичного горения
выключатель блокировки на грузовых дверях
отдельная дверь ясеня
одна вторичная резиденция при 1000 ° C
Лакокрасочное покрытие на силиконовой основе 400 ° C
датчик температуры сплава
на заводе подключены и протестированы
Производительность 20 кг / час
первичная камера 1607 л
Площадь пода 1:36 кв.м
Вторичная камера 694L
Первичная горелка (жидкое топливо) 420.00 БТЕ
Вторичная горелка (жидкое топливо) 900000 БТЕ
Вторичное сгорание 1/6 л.
Вытяжная труба 46см х 6м
Электрообслуживание 220/50
Вес системы 5,700 кг
Размер «D» 152 см.
Высота порта Doad и 60×60 см
Высота порта ясеня и 36x36cm
медицинские, больничные, ветеринарные и промышленные отходы через установку для сжигания медицинских отходов Процесс.
Итак, нас интересуют ваши установки для сжигания отходов, и мы хотели бы получить расценки и описание основных характеристик различных мощностей ваших установок для сжигания отходов, в том числе: небольшие модели (5-25 кг / час); средние модели (25-50 кг / час) и большие модели (50-100 кг / час) и плюс.

Small Waste Incinerator, 10kgs per hour capacity, PLC control Model TS10(PLC)

Small Waste Incinerator, 10kgs per hour capacity, PLC control

Items/Model

TS10(PLC)

Picture

 

Burn Rate

Average 10 kg/hour

Feed Capacity

Average 20kg/feeding

Control Mode

Programmable Logic Controller(PLC) Panel

Combustion Chamber

100L

Internal Dimensions

50x50x40cm

Secondary Chamber

50L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

0.5Kw

Oil Consumption (kg/hour)

average 8.4kg/hour

Gas Consumption (m3/hour)

average 10.1m3/hour

Temperature Monitor

Yes

Temperature Protection

Yes

Oil Tank

100L

Feed Door

30x30cm

Chimney

5 Meter

Chimney Type

Stainless Steel

1st. Chamber Temperature

800–1000

2nd. Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Gross Weight

1500kg

External Dimensions

140x90x120cm


Small Incinerator for Erbil Iraq

HICLOVER – Medical Environmental, WWW.HICLOVER.COM, Waste Incinerators, 
Medical Waste Incinerator,Pet Animal Cremation, Solid Waste Incinerators

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

 

2020-07-05