Archive: August 3, 2024

manufacturer of ha zardous waste incinerator in china

Burning Capacity: 125 kg minimum/time (3-6times/day), double chamber, double combustion system
Imputing door Mouth Width (mm): 760*760 (approx.)
Chimney External Diameter (mm): 300 ± 10
Combustion Improver Device: 0.11kw, Fuel consumption: 7kg/ hour (max)
Re-Burning Device: Oil consumption: 5kg/h, 0.37kw, Oil consumption: 10-20kg/h
Voltage: 380v/220v AC, Warranty: 1 Year, 50 Hz

Per your advertisement for 300 kg.hr. Model – We need to know the price via return.

How many Kg. of Fuel would be required for running this Model 10 hrs. everyday.

We have our own Freight Forwarding Agent.

We had a Contract for Garbage Management before their Civil War for 120 Tons/Day for one Municipality in North Africa
Medical Waste Incinerator

Dual Chamber (Primary & Secondary) with insulation slabs (fully insulated internal refractory lining) along with

controlled air blower for each chamber

Insulation / Refractory Thickness: ≥ 100mm

Chamber plate thickness: ≥ 6mm

Fuel Type: Natural gas based on burning fuel in combustion chambers

Waste Capacity: ≈ 150 Kg/Day

Incineration capacity: ≈ 25 Kg/Day (Separate waste charging and waste removal doors)

Burners: At least with (02) burners of automated start and stop functions

Combustion efficiency: > 97%

Temperature: programmable temperature with temp monitoring system

Residence time: 2 second in secondary chamber

Heating value: 4000 Kcal

Temperature Range: ≈ min 800ºC to max 1200ºC

Electrical supply: 220V with single phase

Chimney Plate Thickness: ≥ 5mm

Water scrubber: Scrubbing using reagent like lime & should made of SS 10 gauge of non-corrosion properties and painted

exteriorly by equipment grade heat resistive enamel

Chimney Height: between 15-25 feet

pet crematory

The temperature is over the minimum and under the maximum required temperature (e.g 1150?C) of the thermal

reactor (partial load).

When switching off, only the solenoid valve for the fuel supply closes, the burner fan stays on to cool and protect the

burner head.

The reactor burner shall be modulating burner with pre-ventilation working on the principle of an oil pressure atomizer

with return nozzle for diesel oil, consisting of:

–      Fan housing with high-powered fan and cover

–      Electric motor

–      Oil pressure pump with built-in oil pressure controller

–      Burner nozzle rod with return nozzle and baffle plate

–      Coupled control with servomotor, rate controller, regulating segment and air valves

–          Electromagnetic shut-off dampers

–      Burner tube with flame pot, burner connection and insulation flange

–      Electrical high voltage ignition with ignition transformer and ignition electrodes

In the control panel:

–      Oil firing sequence control automation relay.

capacity – 50 Kg

Burn rate – 20 Kg/h

maximum Temperature – 1000C

Operating Energy – Diesel

Ignition method –

Combustion chambers – 2

Insulation – refractory Lining

No of burners – 2

Loading Method – Front load with safety latch

Chimney – Heavy duty stainless steel

Control – Burner control

Thermostat control

Timer control

Fan timer control

Instrumentation -4 Digit temperature display

Ash removal – Separate ash removal door

Fuel consumption per Kg –

Automatic & simple to operate control pannel –

3 mm steel casing & fully insulation

Dense  refractory concrete lining rated to 1400 degree to C

safety chute for easy loading –

SS Flue as standard –

Heat recovery option –

Easy onsite Installation –