Archive: February 5, 2024

maker of ha zardous waste burner in china

Burning Capability: 125 kg minimum/time (3-6times/ day), dual chamber, dual combustion system
Imputing door Mouth Width (mm): 760 * 760 (approx.).
Smokeshaft External Size (mm): 300 ± 10.
Combustion Improver Device: 0.11 kw, Fuel intake: 7kg/ hr (max).
Re-Burning Tool: Oil consumption: 5kg/h, 0.37 kw, Oil consumption: 10-20kg/ h.
Voltage: 380v/220v Air Conditioner, Service Warranty: 1 Year, 50 Hz

Per your advertisement for 300 kg.hr. Version– We need to know the rate through return.

The amount of Kg. of Gas would be required for running this Design 10 hrs. day-to-day.

We have our own Freight Forwarding Agent.

We had a Contract for Rubbish Monitoring prior to their Civil Battle for 120 Tons/Day for one Town in North Africa.
Medical Waste Burner

Twin Chamber (Main & & Secondary) with insulation pieces (completely insulated inner refractory lining) in addition to

regulated air blower for each chamber

Insulation/ Refractory Thickness: ≥ 100mm

Chamber plate thickness: ≥ 6mm

Fuel Kind: Natural gas based on shedding fuel in combustion chambers

Waste Ability: ≈ 150 Kg/Day

Incineration capacity: ≈ 25 Kg/Day (Different waste billing as well as waste elimination doors)

Burners: At the very least with (02) burners of automated begin and quit functions

Combustion efficiency: > > 97%

Temperature: programmable temperature with temp monitoring system

Residence time: 2 2nd in secondary chamber

Heating value: 4000 Kcal

Temperature Level Variety: ≈ min 800ºC to max 1200ºC

Electrical supply: 220V with solitary stage

Smokeshaft Plate Thickness: ≥ 5mm

Water scrubber: Rubbing making use of reagent like lime & & must made of SS 10 gauge of non-corrosion properties and painted

exteriorly by tools grade heat repellent enamel

Chimney Height: in between 15-25 feet

diesel oil fired medical waste incenerator

Heat Waste Incinerator Design D. MEGABYTES 750XL Melt Rate-150Kg/ hr minimum Weight( Kg) -4000 kg Additional Chamber

(dual chamber with post-burning) Gas Retention Time 2 2nd Gas Diesel Power Supply for control box 220V-240, single

phase 50-60Hz Minimum operating temperature level 1200 oC One year spare parts bundle for complete maintainability 10m pipe

pipeline. 1100 litre fuel Storage tank +pipeline system Containerised (the container will certainly act as housing) Added chimney expansion

1 metre high One (1) year guarantee.

Burner of 20 Kg: 03 Devices

Electrically controlled burner.

Two-compartment burner with an ability of 20 kg/ hour.

Incinerator with reduced upkeep and operating costs; Geared up with an automatic control panel as well as very easy to make use of with

electro-magnetic locking of the door.

A main waste decrease chamber of 900 ° C. A blog post second burning chamber of gases created in the main chamber

at the very least 1100 ° C.

Carbon residues in ash much less than 5% by weight in accordance with European Directive 2000/76/ EC.

With refractory cellular lining in products of higher quality
1/ Cost of a 200kgs/Hr medical waste burner.
2/ (CIF Term) Price of delivery from manufacturing facility to PAPUA NEW GUINEA port of LAE, Morobe province
3/ Price of 2 Clover engineers to Supervise, Installation, Training our engineers and appointing the medical; waste

incinerator.

incinerator sort of pyrolytic medical waste incinerator ability

Including:Incinerator: Structure to be specified
The mark to be specified
Water temperature: 800 to 1000 ° C;
Refractory
Temperature of more than 1100 ° C + obtained;
Capacity: 20-50 kg / hour
Fireplace: 4 to 6 meters high;
Dimension 70 cmx70 crn
Height: 1.10 meters
Fuel: coal;
Aspiration: natural

– A receiving cage for biomedical waste;

– A combustion chamber with a chimney with a filter to retain the ashes;

Chimney section: about 300 cm; With a minimum height of 6 m

Door size: approximately 50×60 cm

Supplied with a 500 liters fuel tank and all necessary accessories for installation.
–                          INCINERATOR for pharmaceutical waste treatment with                  a scrubbing system

With the following technical data:

1.      One pharma solid waste incinerator unit containing two combustion chambers and based on steel base with scrubbing

system.

2.      Working hour /day: minimum 10 hours/day.

3.      Capacity: Approximated 150 kg/hr. Over 10 hrs.

4.      Wastes characteristics:

·         BULK density: 70 – 100 kg/ bm³.

·         Calorific value: 2000-3000 kcal / hr.

·         Moisture content: 20-30%by weight.

·         Ash content: 2 – 8 % by weight.

·         Plastic content: 15-20 % by weight.

5.      Two combustion chambers.

6.      Operating temperatures:

·         First chamber: not less than 700 – 800 °c.

·         Second chamber: not less than 1200 °c (during steady operation).

7.      The burners should be automatically switched off if any of the combustion chambers doors is open.

8.      The burners of the first and second combustion chambers are selected for burning diesel oil (light fuel).

9.      Automatic loader and unloader to be provided.

10.     Exhaust gases to be comply with International Environmental code and requirements.

lab incinerator china manufacturer

Incinerator double chamber with ability 1.5 m3/batch or 6 m3/ day, electronic thermocontrol range 0‐1200

C, thermocouple, air supply capacity 10m3/ minute, power usage 1.2 kWH/ hour, power 3

stage with netral, cooling water sprinkler capacity 5L/ minute, finished with refractory (insulation,

castable, ceramic covering) and PLC

SUPPLY, INSTALLATION As Well As COMMISSIONING OF WASTE BURNER– TECHNICAL SPECS

The Waste Incinerator is created to burn Type IV of pathological waste as well as contagious, infected “red bag,” surgical

dressings, plastic examination devices and also various other wastes.
General Specs
Burner: 2 heaters (primary heater as well as second heater).
Fuel: Oil.
Capacity (Cubic Mtr): 0.65.
Ave Capacity: 60 kg per hour.
Gas Intake (ltrs/ hr):13.
Outside Dimensions.
Size (mm): 2300.
Size (mm): 1220.
Elevation Incl. Flue (mm) 7000.
Door Opening (mm) 610 x 710 610 x 710.
Operation.
Minutes. Operating Temperature level: 950.
Max. Operating Temperature: 1320.
Residency Time in Second Chamber: 5 sec.
Temperature Level Monitoring: YES.
Various other information.
Easy and safe operation.
Huge counter-balanced fill door with electrical lockout.
Automatic control system gives preset melt times and shut down.
Reload light indicates to driver when it is time to reenergize.
Be required for exhaustion of last charge.
Low power usage degrees.
Programmable electronic temperature controls preserve temperature level, assuring complete combustion while conserving fuel.
Stress blower with regulating air control creates disturbance as well as disperses burning air to additional chamber.
Second heater with temperature triggered modulating control offers fast preheat and sustains high temperature

efficiency at low power usage degrees.
Charging price