Archive: February 25, 2023

	Items/Model
TS100(PLC)	Picture
	Principle
Waste Incineration Treatment	Burn Rate
60-80 kg/hour	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
1200L	Internal Dimensions
120x100x100cm	Secondary Chamber
600L	Smoke Filter Chamber
Yes(Dry Scrubber)	Feed Mode
Manual	Voltage
220V	Oil Consumption (kg/hour)
Typical 20.4	Gas Consumption (m3/hour)
***	Temperature Monitor
Digital Screen	Temperature Protection
Yes	Oil Tank
1100L	Feed Door
80x60cm	Chimney
10Meter	Chimney Type
Stainless Steel	1st.
800℃–-1000℃	2nd. Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Gross Weight
6000kg	External Dimensions

260x150x180cm

The requirement is for a pyrolytic double-chamber incinerator. The incinerator shall be capable of using diesel 

fuel as a supplemental fuel oil.

It should incorporate an Air Pollution Control (APC) System suitable for basic emission control.

The proposed incinerators shall be appropriate for critical harsh environmental conditions, suitable for rapid 

deployment, and different climate zones (e.g. desert, tropical country, mountain, etc.) in which there are several 

variations of the relative natural forces (e.g. temperature, humidity, wind, etc.) for a minimum period of 10 years 

if the specified maintenance schedule is followed.

The incinerators should be supplied assembled, whenever possible, and all parts and components should be 

packaged on pallets in order to be transported via road, air (via helicopters or air-cargoes, e.g. MI8 or C130) 

and via sea in a 20’ ISO sea shipping containers.

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

	Items/Model
TS500(PLC)	Picture
	Principle
Waste Incineration Treatment	Burn Rate
150-200 kg/hour	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
2700L	Internal Dimensions
190x120x120cm	Secondary Chamber
1300L	Smoke Filter Chamber
Yes	Feed Mode
Manual	Voltage
220V	Oil Consumption (kg/hour)
Average 28	Gas Consumption (m3/hour)
***	Temperature Monitor
Digital Screen	Temperature Protection
Yes	Oil Tank
1400L	Feed Door
90x80cm	Chimney
10Meter	Chimney Type
Stainless Steel	1st.
800℃–-1000℃	2nd. Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Gross Weight
15000kg	External Dimensions

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The minimum combustion temperature of the primary chamber should not be less than 850°C;

The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.

The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.

The following conditions should be met in the secondary combustion chamber:

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;

The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;

The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;

The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;

400x210x300cm(without chimney)

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

	Model
YD-100	Picture
	Burning Rate
100-150 kgs/hour	Main Combustion Chamber
2000 Liters	Secondary Combustion Chamber
500 Liters	Feed Mode
Manual	Voltage
220V/380V	Power
2.5Kw	Fuel Type
Diesel Oil	Burner
Italy Original	Oil Consumption (Diesel Oil)
Typical 28 kg/hour	Gas Consumption (Natural Gas)
***	Internal Dimensions
180x115x98 cm (primary chamber)	External Dimensions
270x185x280cm (without chimney)	Temperature Monitor
Yes	Oil Tank Capacity(if Petroleum fuel)
200 Liters	Door Opening
55 x 80cm	Chimney Length
6.0 Meters	Chimney Type
Steel	Equipment Gross Weight
9000 kgs
Operation Technical Specifications	Main Chamber Temperature
800℃–-1000℃	Secondary Chamber Temperature
1000℃-1200℃	Residency Time
2.0 Sec.	Burning Efficiency
＞98 percent	Waste Lower Calorific Power