Archive: February 2, 2023

MUNICIPAL SOLID WASTE INCINERATORS

Medical incinerator with a 10 kg/hour (15 lbs/hour) capacity shall be constructed on the site, complete with Stacks, control panels and all accessories, complying with 01015 par. 5.16.2
-Oils
MUNICIPAL SOLID WASTE INCINERATORS

Municipal waste incinerator quantities and capacities shall be made for 24-hour 7-day-a-week continuous operation.

Incinerators will be capable of processing both wet and dry material and operating on each diesel fuel, JP-8 fuel,

or waste oil; watch Pipes for fuel storage system requirements. The following shall be provided as a minimum:

Reinforced concrete mounting bases, feed or charging hoppers (or loaders), main combustion chambers

with ash cleanout doors, secondary combustion chambers with ash cleanout doors, cyclone air filters (or separators),

and forced air exhaust stacks (or chimneys).

The charging system will consist of, as a minimum, a hopper for top feeding and automatically operated hydraulic

charging pliers or augur. To prevent warpage or excessive thermal expansion, a charger cooling system using either

atmosphere or water shall be supplied.

Main combustion chamber shall be either the rotary- or stationary fixed-hearth (or kiln) type incinerator. Burner

and combustion air controls shall be completely automatic comprising of, as a minimum, digital ignition and all

necessary interlocks and safety devices to provide safe operation. The chamber and burner shall be made to

keep a minimum combustion temperature of 700 to 870 C (1300 to 1600 F), but will not to exceed 980

C (1800 F). The ash-removal system will consist of the automatic constant removal of the ash into an ashquench

pit where cooled by water and removed by conveyor. Burner and combustion air controls shall be completely automatic

comprising of, as a minimum, digital ignition and all necessary interlocks and safety devices to provide safe

operation. The chamber and burner shall be designed to maintain a minimum combustion temperature of

930 to 980 C (1700 to 1800 F), but will not to exceed 1150 C (2100 F). The ash-removal system will consist of, as

a minimum, the manual removal into a sterile

Cyclone air filters shall be provided to remove the larger particulates. Cyclone air separators may be provided with

powered fans to increase the velocity of the gases inside the cyclone to enhance the collection efficiency for smaller

particles.

5.16.2 MEDICAL WASTE INCINERATORS

Medical waste incinerators shall be especially designed by the manufacturer to eliminate all medical wastes. All units shall be made for 2 hours

per day of continuous operation and be rated in volume per hour (i.e. kg/hr or lbs/hr).

Incinerator loading or charging of medical waste shall be batched-fed manually.

Main combustion chamber shall be the stationary fixed-hearth (or kiln), multiple-chamber, retort type or larger

capacity rotary-hearth (or kiln) type. Burner and combustion air controls shall be completely automatic comprising of, as a

minimum, electronic ignition and all necessary interlocks and safety devices to provide safe operation. The

chamber and burner shall be designed to maintain a minimum combustion temperature of 760 to 870 C

(1400 to 1600 F). The ash-removal system will consist of the automatic constant removal of the ash into an ashquench

pit where cooled by water and removed by conveyor.

Secondary combustion chamber shall be a solid-walled and -floored, flat, refractory-lined cylinder type

incinerator designed to oxidize (or burn) the organic vapors and gases. Burner and combustion air controls shall be

completely automatic comprising of, as a minimum, digital ignition and all necessary interlocks and safety devices to

provide safe operation. The chamber and burner shall be designed to maintain a minimum combustion temperature

of 930 to 1200 C (1700 to 2200 F) with a minimum gas residence (or dwell) time of 2.0 seconds. The ashremoval

system will consist of, as a minimum, the manual removal into a sterile collection hopper.

Cyclone air filters shall be provided to remove the larger particulates. Cyclone air separators may be provided with

powered fans to increase the velocity of the gases inside the cyclone to enhance the collection efficiency for smaller

particles.

5.16.3 INCINERATOR STACKS (OR CHIMNEYS)

Stack size shall be in accordance with the manufacturer’s recommendations. Stacks will be the forced-air kind and

completely self-supporting and unattached to nearby structures. As a minimum, stack heights will minimize

downwash of stack emissions as a result of aerodynamic influences from neighboring structures and be calculated in accordance

with DoD 4715.05-G, Overseas Environmental Baseline Guidance Document. Stacks shall be supplied with

corrosion-resistant steel weather caps.”

a specific type to use at a crematorium. Something that enables especially for ash collection etc.cremation option to the deceased’s family. Is this product suitable, are ashes easily accumulated etc., a cremator, for pet practice, could you introduce and all detail of earnings, tax, environtment.-Plastic. 500Kg/hr and to be utilized maximum 6 times, is this means it’ll provide only 3 tons every day?
Municipal incinerators with a 10-metric ton/24-hour capability, complete with Stacks, control panels and all accessories, complying with 01015 par. 5.16.1

with DoD 4715.05-G, Overseas Environmental Baseline Guidance Document. Stacks shall be provided with

corrosion-resistant steel weather caps.”