Archive: September 6, 2022

Incinérateur de crémation pour animaux de compagnie hiclover.com macao

Actuellement, nous fournissons différentes séries pour les exigences et la conception des clients locaux

incinérateur mis à jour avec notre technologie de pointe. La fonctionnalité de conception mise à jour
de notre gamme d’incinérateurs en font l’un des plus rentables au monde.
Principales caractéristiques:
* Tous les modèles avec double chambre de combustion.
* Cheminée / cheminée en acier inoxydable, longue durée de vie.
* Haute température, longue durée de vie de l’incinérateur.
* Installation gratuite ou minimale sur site.
* Taux de combustion élevé, de 10 kg à 600 kg par heure, jusqu’à 10 tonnes par jour.
* Plan de contrôle PLC pour un fonctionnement intelligent.
* Nouveau design pour les entreprises de crémation d’animaux de compagnie.
* Garantie d’un an sur l’incinérateur et les pièces en stock.

Il présente des mérites uniques et avancés avec une taille compacte, un effet de combustion élevé,
technologie de combustion raisonnable, degré élevé de non-mal, etc. c’est un idéal
choix pour le traitement des déchets des hôpitaux, des hôtels et de divers domaines.

Caractéristiques:

(1) L’incinération par pyrolyse gazéifiée est utilisée pour brûler de nombreux types de déchets.
(2) Les déchets peuvent être brûlés une fois par jour par incinération gazéifiée.
(3) L’incinération gazéifiée, l’incinération mixte et le traitement par combustion garantissent un faible niveau d’émission de poussière, de dioxine, etc.
(4) Une opération totalement fermée convient au traitement des déchets infectieux pour éviter la pollution secondaire.

(5) Structure compacte et petite occupation du sol.
WWW.HICLOVER.COM Incinérateurs de déchets Filtres à air automatiques
Nanjing Clover Medical Technology Co., Ltd.

Tél: + 86-25-8461 0201

Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Articles / modèle TS10 (API) TS20 (API) TS30 (API) TS50 (API) TS100 (API)
Taux de combustion (moyen) 10 kg / heure 20 kg / heure 30 kg / heure 50 kg / heure 100 kg / heure
Capacité d’alimentation (moyenne) 20 kg 40 kg 60 kg 100 kg 200 kilogrammes
Mode de contrôle PLC PLC PLC PLC PLC
Chambre de combustion 100 L 210 L 330 L 560 L 1200 L
Dimensions internes 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100 cm
Chambre secondaire 50 L 110 L 180 L 280 L 600 L
Chambre de filtre à fumée Oui Oui Oui Oui Oui
Mode d’alimentation Manuel Manuel Manuel Manuel Manuel
Tension 220V 220V 220V 220V 220V
Pouvoir 0,5 Kw 0,5 Kw 0,5 Kw 0,7 kW 0,7 kW
Consommation d’huile (kg / heure) 5,4–12,6 7,8–16,3 10,2–20 12,1–24 14-28
Consommation de gaz (m3 / heure) 6,2–11,4 8–15,7 9,8–20 9,9–26,1 10–32,2
Moniteur de température Oui Oui Oui Oui Oui
Protection de la température Oui Oui Oui Oui Oui
Cuve à mazout 100 L 100 L 100 L 100 L 200 L
Porte d’alimentation 30x30cm 45 x 40 cm 55 x 50 cm 70 x 55 cm 80x60cm
Cheminée 3 mètres 3 mètres 5 mètres 5 mètres 10 mètres
Type de cheminée Acier inoxydable Acier inoxydable Acier inoxydable Acier inoxydable Acier inoxydable
1er. Température de la chambre 800 –1000 800 –1000 800 –1000 800 –1000 800 –1000
2ème. Température de la chambre 1000 -1200 1000 -1200 1000 -1200 1000 -1200 1000 -1200
Temps de résidence 2,0 sec. 2,0 sec. 2,0 sec. 2,0 sec. 2,0 sec.
Poids brut 1 500 kg 2200 kg 3000 kg 4500 kg 6000 kg
Dimensions extérieures 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

CHAMBRE PRIMAIRE
Boîtier en acier robuste
Doublure et isolation réfractaires de haute qualité Grande porte à contrepoids à chargement par le haut pleine grandeur
1 x brûleurs d’allumage au fioul / gaz fonctionnant marche / arrêt

CHAMBRE SECONDAIRE
Boîtier en acier robuste
Revêtement et isolation réfractaires de haute qualité Temps de séjour du gaz de 2 secondes
1 x brûleurs d’allumage au fioul / gaz fonctionnant marche / arrêt

CHEMINÉE
Boîtier robuste en acier inoxydable

PANNEAU DE COMMANDE
Contrôle des brûleurs primaires et secondaires Surveillance de la température avec affichage à 4 chiffres

Dispositif de contrôle du thermostat pour brûleur (économiseur de carburant) Minuterie
contrôle 0-12 heures
Contrôle intégré de la minuterie du ventilateur

ANCILLAIRES
Manuels d’utilisation et d’entretien Liste des pièces de rechange

PRINCIPALES CARACTÉRISTIQUES

• Préchauffage du post-combustion

• Températures d’incinération supérieures à 1300 ° C

• Boîtier en acier de 5 mm et isolation complète

• Revêtement en béton réfractaire dense évalué à 1600 ° C

Une usine approuvée doit avoir quatre sections distinctes qui démontrent trois principes de
La turbulence, le temps de séjour et la température sont intégrés dans la conception de l’usine.

Les sections réglementées peuvent inclure, mais sans s’y limiter:

Disposition générale de l’usine. Chambre d’alimentation / chargement
Chambre de combustion primaire. Chambre de combustion secondaire. Épurateurs de particules
Épurateurs de gaz acides La cheminée / cheminée.
Des méthodes d’alimentation contrôlées hygiéniques, mécaniques ou automatiques doivent être utilisées
n’influencera pas négativement la température de l’air dans les chambres primaire et secondaire de l’incinérateur.

Aucun déchet ne doit être introduit dans l’incinérateur:

1. Jusqu’à ce que les températures minimales soient atteintes.
2. Si les températures minimales de combustion ne sont pas maintenues.
3. Chaque fois que la charge précédente n’a pas été complètement brûlée dans le cas d’une alimentation par lots.
4. Jusqu’à ce que l’ajout de déchets supplémentaires ne fasse pas dépasser les paramètres de conception de l’incinérateur.
La chambre de combustion primaire doit:

1. Être accepté comme zone de combustion primaire.
2. Être équipé d’un brûleur brûlant du gaz / combustible ou des combustibles liquides à faible teneur en soufre.

Les autres méthodes de combustion seront jugées au mérite.

3. S’assurer que l’alimentation en air primaire est contrôlée efficacement

4. Assurez-vous que la température de sortie minimale n’est pas inférieure à 850 ° C
La chambre de combustion secondaire doit:

1. Être accepté comme zone de combustion secondaire.
2. Être équipé de brûleur (s) secondaire (s) brûlant du gaz ou du combustible liquide à faible teneur en soufre ou tout combustible approprié.

3. Assurez-vous que l’alimentation en air secondaire est contrôlée efficacement.
4. Assurez-vous que la flamme est en contact avec tous les gaz.
5. Assurez-vous que le temps de séjour n’est pas inférieur à deux (2) secondes.
6. Assurez-vous que la température du gaz est mesurée par rapport à la paroi intérieure du

chambre et pas dans la zone de flamme, n’est pas inférieur à
1100oC.
7. Assurez-vous que la teneur en oxygène des gaz émis n’est pas inférieure à 11%.
8. Assurez-vous que les températures primaire et de combustion sont maintenues
jusqu’à ce que tous les déchets aient été complètement brûlés
Un collecteur de particules mécanique doit être incorporé après la combustion secondaire
chambre pour l’élimination des particules polluantes entraînées dans le flux de gaz de combustion.
Les collecteurs de particules peuvent comprendre l’un des éléments suivants ou
une combinaison de ceux-ci:
Séparateur cyclone Précipitateurs électrostatiques Filtres en tissu

Спиральный фильтр солевого тумана – фильтр первого выбора для защиты двигателей нефтепромысловых и вентиляционных двигателей в прибрежных районах.

16 мая 2019 г. Новости отрасли: 185 просмотров

С постоянным совершенствованием требований прибрежных производственных операций и непрерывным развитием науки и техники исследования, разработки и использование фильтрующего оборудования становились все шире и шире, что отвечает различным индивидуальным требованиям условий промышленного производства. Эта статья знакомит вас с разновидностью фильтрующего оборудования, называемого «автоматическим намоточным фильтром солевого тумана». С точки зрения названия, оборудование для фильтрации солевого тумана обычно используется только в прибрежных районах.Ниже подробно описывается серия продуктов.

1. Что такое автоматический роликовый воздушный фильтр с солевым туманом?

Фильтр солевого тумана – это разновидность фильтрующего оборудования, обычно используемого для защиты двигателей и вентиляторов на нефтяных промыслах. Он подходит для прибрежных районов или районов с большим количеством солевого тумана. Состав фильтра солевого тумана в основном состоит из трех частей, а именно гидроизоляции, высокоэффективного фильтра и шкафа. Чтобы противостоять эрозии дождя и солевых брызг, материалы этих частей, как правило, изготовлены из нержавеющей стали 304 или нержавеющая сталь с повышенным содержанием никеля Состав материала.

Во-вторых, принцип фильтрации автоматического роликового фильтра соляного тумана.

Фильтр солевого тумана оснащен вентилятором. Когда вентилятор включен, влажный воздух, содержащий солевой туман, будет всасываться в фильтр. В фильтре есть устройство защиты от дождя. Когда вдыхаемый воздух водяного тумана встречается с устройством защиты от дождя. конденсируется в капли воды, а затем капли воды будут стекать по канавке на внутренней водонепроницаемой сердцевине фильтра солевого тумана к нижней части водонепроницаемого устройства и, наконец, вытекать из фильтра солевого тумана.

Если есть дождевая вода, фильтр солевого тумана имеет лабиринтный листовой фильтрующий элемент, который может выполнять многослойную фильтрацию, чтобы дождевая вода не попадала в фильтрующий элемент.

В-третьих, меры предосторожности при установке воздушного фильтра соляного тумана

1. Фильтр солевого тумана обычно устанавливается на входе воздуха в двигатель для фильтрации влаги, соли и пыли в воздухе и защиты двигателя.

2. Если в генераторной установке используется фильтр солевого тумана, он, как правило, устанавливается на заднем воздухозаборном кожухе генератора и представляет собой плоскую монтажную форму с воздухозаборным кожухом. Обычно применяется бурение на месте, чтобы обеспечить точность сверления отверстий под болты.

3. Если фильтр солевого тумана используется в двигателе постоянного тока, он обычно устанавливается на входе воздуха охлаждающего вентилятора и устанавливается на поверхность фланца с отверстием для входа воздуха. Обычно используется тот же метод сверления на месте для обеспечения точность отверстий под болты. А после установки фильтра солевого тумана, чтобы уменьшить сопротивление воздухозаборнику и обеспечить достаточное количество воздуха для охлаждения двигателя, другие материалы фильтрующего слоя, первоначально установленные на воздухозаборнике, должны быть удалены.

4. Кроме того, чтобы предотвратить утечку воздуха и обеспечить приток воздуха, соединение между фильтром солевого тумана и впускным отверстием для воздуха должно быть строго закрыто.

5. Независимо от цели, после установки фильтра солевого тумана, необходимо принять меры по опоре и укреплению снизу, чтобы обеспечить надежность и безопасность установки.

6. После установки фильтра солевого тумана на воздухозаборнике двигателя обратите внимание на изменения объема поступающего воздуха и изменения температуры двигателя. При возникновении ненормальных условий необходимо своевременно принять меры для уменьшения сопротивления воздуха и увеличения объем охлаждающего воздуха.

Обмоточный фильтр солевого тумана представляет собой модернизированный и улучшенный продукт обычного фильтра солевого тумана, который позволяет избежать трудоемкости частой замены фильтра в морских операциях. Он может быть автоматически намотан на мощность 7-8, а фильтрующий материал должен быть заменяется вручную, что в 7-8 раз экономит затраты на рабочую силу и стоимость фильтрующего материала, хотя первоначальные вложения в оборудование немного выше, но с точки зрения последующих затрат на техническое обслуживание и эксплуатацию, это довольно просто и дешево.

Выше были представлены принцип фильтрации и инструкции по установке автоматического рольставни-фильтра солевого тумана.Если вы хотите узнать больше информации и знаний о фильтрующем оборудовании, пожалуйста, войдите на официальный сайт Ecolead Nanjing Ecolead.

URL с дополнительным содержанием: www.ecolead.cn Тел: 025-57138032

ЗАКОН ОБ ОХРАНЕ ОКРУЖАЮЩЕЙ СРЕДЫ

Ниже приведены выдержки из Закона об охране окружающей среды.

1. «Загрязнение» означает любой шум, тепло, вибрацию или вещество и включает такие другие вещества, которые министр может

прописать, что в случае выброса в окружающую среду,
(а) ставит под угрозу здоровье, безопасность или благополучие людей,
(b) мешает или может помешать нормальному распоряжению жизнью или имуществом,
(c) угрожает здоровью животных, или
(d) причиняет или может нанести ущерб растениям или имуществу;

«Разряд» включает, но не ограничивает значение, любое перекачивание, выливание, бросание, сброс, выброс, сжигание,

распыление, распространение, утечка, разлив или утечка;

«Окружающая среда» означает компоненты Земли и включает
(а) воздух, земля и вода,
(б) все слои атмосферы,
(c) все органические и неорганические вещества и живые организмы, и
(d) взаимодействующие природные системы, которые включают компоненты, указанные в параграфах (a) – (c).

«Инспектор» означает лицо, назначенное в соответствии с подразделом 3 (2), и в его состав входит главный специалист по охране окружающей среды.

2.2 Министр может
(а) создавать, эксплуатировать и содержать станции для мониторинга качества окружающей среды на территориях;
(b) проводить исследования, конференции и учебные программы, касающиеся загрязняющих веществ и
сохранение, защита или улучшение окружающей среды;
(c) разрабатывать, координировать и управлять политиками, стандартами, руководящими принципами и кодексами практики, относящимися к

сохранение, защита или улучшение окружающей среды;
(d) собирать, публиковать и распространять информацию, касающуюся загрязнителей и сохранения, защиты или

улучшение окружающей среды:

3. (1) Министр должен назначить главного сотрудника по охране окружающей среды, который будет применять и обеспечивать выполнение настоящего Закона и

правила.

(2) Главный инспектор по охране окружающей среды может назначать инспекторов и указывает при назначении полномочия.

которые могут выполняться, и обязанности, которые могут выполняться инспектором в соответствии с настоящим Законом и нормативными актами.

5. (1) Согласно подразделу (3), никто не должен сбрасывать или разрешать сброс загрязнителя в

среда.

(3) Подраздел (1) не применяется, если лицо, выполнившее сброс загрязнителя или разрешившее сброс

загрязнитель устанавливает, что
(а) сброс разрешен настоящим Законом или нормативными актами или приказом, изданным в соответствии с этим Законом или нормативными актами;
(б) загрязнитель использовался исключительно в бытовых целях и был удален из жилого дома;
(c) загрязнитель был выпущен из выхлопной системы транспортного средства;

(d) сброс загрязнителя в результате сжигания листьев, листвы, древесины, сельскохозяйственных культур или стерни для домашнего или

сельскохозяйственные цели;
(e) сброс загрязнителя в результате сжигания для расчистки или выравнивания земель;
(f) сброс загрязнителя в результате пожара, устроенного государственным должностным лицом для управления средой обитания при лесоводстве.

цели;
(g) загрязнитель был сброшен в целях борьбы с лесным пожаром;
(h) загрязнитель представляет собой частицы почвы или песчинки, сброшенные в ходе сельского хозяйства или садоводства; или же
(i) загрязнитель представляет собой пестицид, классифицированный и помеченный как «отечественный» в соответствии с Правилами по средствам борьбы с вредителями.

(Канада).

(4) Исключения, изложенные в подразделе (3), не применяются, если лицо сбрасывает загрязнитель, который инспектор

разумные основания полагать, что обычно не связаны с освобождением от исключенной деятельности.

5.1. В случае сброса загрязняющего вещества в окружающую среду в нарушение настоящего Закона, постановлений или

положения разрешения или лицензии, выданных в соответствии с настоящим Законом или нормативными актами, или имеется разумная вероятность такого

выделение существует, каждое лицо вызывает или способствует выделению или увеличивает вероятность таких выделений, и

владелец или лицо, ответственное за управление или контроль загрязнителя до его сброса или вероятного сброса, должны

немедленно:
(a) в соответствии с любыми правилами, сообщать об увольнении или вероятном выписке лицу или в учреждение, назначенное

нормативно-правовые акты;
(b) принять все разумные меры, совместимые с общественной безопасностью, чтобы остановить сброс и устранить любые повреждения.
вызванные разрядом, и предотвратить или устранить любую опасность для жизни, здоровья, имущества или окружающей среды, которая может возникнуть или может

разумно ожидать, что они возникнут в результате разряда или вероятного разряда; а также
(c) приложить разумные усилия, чтобы уведомить каждого представителя общественности, на которого может негативно повлиять сброс или

скорее всего разрядка.

6. (1) Если инспектор на разумных основаниях полагает, что сброс загрязнителя в нарушение настоящего Закона

или постановления, или положение о разрешении или лицензии, выданных в соответствии с этим Законом или постановлениями, имели место или

Если это произойдет, инспектор может издать приказ, требующий от любого лица, вызвавшего или способствующего сбросу, или владельца, или

лицо, ответственное за управление или контроль загрязнителя, чтобы остановить сброс к дате, указанной в приказе.

7. (1) Независимо от статьи 6, если лицо сбрасывает или разрешает сброс загрязнителя в

окружающей среде, инспектор может приказать этому лицу отремонтировать или устранить любую травму или ущерб окружающей среде, возникшие в результате

разряд.

(2) Если человек не может или не позаботится отремонтировать или устранить любую травму или ущерб окружающей среде в соответствии с приказом

сделано в соответствии с подразделом (1) или если требуются немедленные меры по защите окружающей среды, начальник

Сотрудник по охране окружающей среды может потребовать принятия мер, которые он или она считает необходимыми для ремонта или ремонта.

устранить травму или ущерб окружающей среде в результате любого разряда.

ПРИЛОЖЕНИЕ 2 – МОДИФИЦИРОВАННАЯ КОНСТРУКЦИЯ И ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ БОЧКА

Модифицированный бочонок для горения обычно изготавливается из металлической бочки для топлива или масла объемом 45 галлонов. Модификации приводят к большему

выделение и удержание тепла, лучшее смешивание отходов с поступающим воздухом и более длительное время выдержки внутри ствола.

В совокупности эти модификации приводят к более полному сгоранию твердых отходов, чем открытое сжигание на земле или на земле.

в яме.

Dilengkapi dengan unit penapis kipas

2019-05-13 Peralatan pembersihan udara405 paparan


pengenalan produk

FFU adalah peranti bekalan udara terminal modular dengan kekuatan dan fungsi penapisannya sendiri. Blower udara menghisap udara dari bahagian atas FFU dan disaring oleh HEPA. Udara bersih yang disaring dihantar secara merata pada kelajuan angin 0,45m / s ± 20% di seluruh permukaan saluran keluar udara.

FFU dapat dihubungkan dan digunakan secara modular, menjadikan FFU digunakan secara meluas di bilik bersih, meja operasi bersih, jalur produksi bersih, bilik bersih berkumpul dan ratusan aplikasi tempatan.

Penggunaan Produk:

FFU banyak digunakan di bilik bersih, meja operasi bersih, barisan pengeluaran bersih, bilik bersih berkumpul dan ratusan aplikasi tempatan. Ia dapat menyediakan udara bersih yang berkualiti tinggi untuk bilik bersih dan lingkungan mikro dengan ukuran dan tahap kebersihan yang berbeza. Ia sesuai untuk acara kebersihan yang tinggi seperti semikonduktor, elektronik, LCD, cakera keras, optik, industri biologi, dan lain-lain, dengan cepat menduduki pasaran dengan kelebihan unik dan harga yang berpatutan.

Ciri-ciri Produk:

Pelbagai cara boleh digunakan untuk mengawal kelajuan;

Penggunaan kuasa operasi yang rendah, mengurangkan kos;

Sistem pengalihan saluran udara terbina dalam untuk mengurangkan kebisingan dan kehilangan tekanan dan meningkatkan kecekapan kipas;

Kipas sentrifugal asli EBM Jerman yang mundur dapat memberikan jumlah udara yang tinggi. Keadaan tekanan statik yang tinggi, jangka hayat bekerja melebihi 50,000 jam;

Sesuai digunakan di bilik bersih dengan kebersihan Kelas1-1000;

★ Sangat sesuai untuk dipasang ke barisan pengeluaran super bersih, yang dapat disusun sebagai satu unit mengikut keperluan proses, atau beberapa unit dapat dihubungkan secara bersiri untuk membentuk barisan pemasangan 100-tahap;

Sebelum meninggalkan kilang, produk sesuai dengan Piawaian Persekutuan AS 209E, dan penghitung zarah debu digunakan untuk mengimbas dan menguji satu persatu untuk memastikan kualitinya.

Lukisan standard

Parameter teknikal

Lebih banyak URL kandungan: www.ecolead.cn Tel: 025-57138032

Hospital Waste Incinerator

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 

TS model PLC incinerator is latest design for waste treatment, include medical waste, animal cremation and other solid waste. This equipment quality structural for kinds of site, like hospital, small incinerator suppliers, small incinerator unitc, small incinerator units, small incinerators for medical waste us made, small incinerators for medical waste, environmental department, animal cremation agencies, etc. CLOVER Incinerator supply updated models with dual combustion chamber and smoke filter chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.

Items/Model TS50(PLC)
Picture  
Burn Rate 50 kg/hour
Feed Capacity 100kg
Control Mode PLC
Combustion Chamber 560L
Internal Dimensions 100x80x70cm
Secondary Chamber 280L
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V
Power 0.7Kw
Oil Consumption (kg/hour) 12.1–24
Gas Consumption (m3/hour) 9.9–26.1
Temperature Monitor Yes
Temperature Protection Yes
Oil Tank 100L
Feed Door 70x55cm
Chimney 5Meter
Chimney Type Stainless Steel
1st. Chamber Temperature 800degree–1000degree
2nd. Chamber Temperature 1000degree-1200degree
Residency Time 2.0 Sec.
Gross Weight 4500kg
External Dimensions 230x130x155cm

50 to 60kg/hr as well as 100 to 120kg/hr diesel powered incinerator

50 to 60kg/hr and 100 to 120kg/hr diesel powered burner.1. 2. Needed Blazing Capacity:
Around 4,500 loads annually. The incinerator has to efficient in blazing form of waste any mixes thereof at a cost of 3 heaps per hour. The system will be made to compete at least five consecutive times non-stop if needed.
3. Incinerator Layout Requires:
The system ought to be simple in design and process, with marginal electronic components.
The incinerator and connected air pollution control modern technology will certainly be:
a.Low used of encouraging fuel;
b.Low in electric power usage;
c.Require hardly any pre-processing of Local strong waste;
d.The air pollution system shall adhere to EU Waste Incineration Regulation 2000/76 and also creates component of the entire incinerator arrangement.
3.1 Particular Data that must be Given with the Design 3.1.1 Incinerator Information:
a.Batch Lots Capability;
b.Primary chamber style (density, diameter, length, insulation, cellular lining, quantity hearth place, weight); c. Second chamber design (thickness, diameter, length, insulation, lining, quantity hearth place, weight);.
C.Exhaust stack design (density, diameter, liner variety of segments, overall heap size, height above base, weight);.
D.Type and assortment of supporting gas heaters;.
E.Fuel needs – type, quantities;.
F.Electrical power usage;.
G.Electrical services called for;.
H.Water requirements– amounts;.
I.Any various other input demands and also consumables;.
K.Residence time to guarantee ideal devastation of waste as well as comply with needed air pollution control standards;.
L.Potential weight reduction (percent) of waste;.
M.Options to instantly and also continually display and document information such as days, time of day, batch sequential number;.
N.A temperature or decorative sign to demonstrate warmth status of gear; and also.
O.Details on visuals screens as well as/ or computer system recording gadgets. A.The sort of air pollution control apparatus selected will follow EU WID Waste Incineration.
b.Directive 2000/76;.
C.Details on the gas cleanup systems to improve the elimination of great pieces, acid fumes and also hefty.
d.metals;.
E.Details on elements, such as:.
quencher;.
condenser/ absorber;.
entrainment separator and.
Electrical power usage;.
F.Any various other input demands as well as consumables (e.g. lime);.
G.Details on graphic displays as well as/ or computer recording apparatus;.
H.Environmental needs – – The machine would certainly have the ability/ skill to abide by pertinent air quality criteria; i.e.EU Waste Incineration Regulation 2000/76. (or similar standards as well as requirements acceptable to the Australian Commonwealth Federal Government Department of the Setting);.
I.Specify air contamination parameters that are kept an eye on.
3.1.3 Site Demands for the Incinerator.
B.Infrastructure needed (supply of water, power supply water drainage); and.
C.Any particular ecological or climatic/meteorological facets that requires consideration.
3.1.4 Housing Needs and also Style.
A.Details on needs for a protected unit for the burner and connected air pollution control system. The room will surely be designed to achieve job-related health and security needs such as: a. Free space is readily available on all sides as well as warm radiation is kept at a minimum giving the operators .
B.easy viable environment and also venting;.
C.There are safe storage space facilities for waste;.
D.There are measures to stay clear of vermin as well as pests;.
E.The materials will be of adequate architectural depth for security and to hold up against sea rust.
4. Training, Upkeep And Direction Manuals.
Supply information on maintenance demands, such as:.
A.General cleaning as well as upkeep– regularity, skills/ technical expertise required;.
B.Expected life span of elements as well as the system as a whole;.
C.Expected regularity of the requirement for substitute of components;.
D.Availability of parts as well as location of vendors;.
E.Frequency of requirement for significant overhauls; and .
F.Estimated down time needed for general upkeep as well as significant overhauls.an incinerator for our deceased pets in the ranch especially poultry.

3.1.2 Air Pollution Control System Information.
a.The sort of air pollution control devices selected will follow EU WID Waste Incineration.
b.Directive 2000/76;.
c.Details on the gas cleansing systems to improve the elimination of great bits, acid gases and also hefty.
d.metals;.
e.Details on elements, such as:.
quencher;.
condenser/ absorber;.
venturi scrubber;.
entrainment separator and.
emissions pile( s).
Electrical power usage;.
f.Any various other input demands as well as consumables (e.g. lime);.
g.Details on graphic displays as well as/ or computer recording devices;.
h.Environmental needs – – The system would certainly have the ability/ ability to abide by pertinent air quality standards; i.e.EU Waste Incineration Regulation 2000/76. (or similar standards as well as requirements acceptable to the Australian Commonwealth Federal Government Department of the Setting);.
i.Specify air contamination parameters that are kept an eye on.
3.1.3 Site Demands for the Incinerator.
a.Total land area dimentions;.
b.Infrastructure needed (supply of water, power supply water drainage); and.
c.Any particular ecological or climatic/meteorological aspects that requires consideration.
3.1.4 Housing Needs and also Style.
a.Details on needs for a protected unit for the burner and connected air contamination control system. The room will certainly be designed to attain job-related health and safety needs such as: a. Free space is readily available on all sides as well as warm radiation is kept at a minimum giving the operators an:.
b.easy workable environment and also ventilation;.
c.There are safe storage space centers for waste;.
d.There are measures to stay clear of vermin as well as pests;.
e.The materials will be of adequate architectural thickness for security and to hold up against sea corrosion.
4. Training, Upkeep And Direction Manuals.
4.1 Upkeep Handbooks.
Supply information on maintenance demands, such as:.
a.General cleaning as well as upkeep– regularity, skills/ technological experience required;.
b.Expected life span of components as well as the system as a whole;.
c.Expected regularity of the requirement for substitute of components;.
d.Availability of parts as well as location of vendors;.
e.Frequency of requirement for significant overhauls; and also.
f.Estimated down time needed for general upkeep as well as significant overhauls.an incinerator for our dead pets in the ranch particularly poultry.

Waste incineration market energy is fierce level of relevant facilities to be boosted

[China] Solid Waste Environmental online waste incineration sectors advancement momentum is tough, and also the brightest of resources chasing also show up numerous times in the in 2014 the rate of handling cost diving, sector increased concerns about the vicious competitors. “Thirteen Five” throughout garbage building and construction market investment space at 1000 billion yuan; the growing trash incineration ability of the operation of the facility, the governing degree difficulties. Lots of industry companies claimed in easy incineration links, market competition is also fierce, competitive professional enterprises need to play in the area of organization models as well as technical advancement.

Waste incineration sector energy is tough degree of associated centers to be enhanced

“Twelve 5” is a fast-growing trash incineration 5 years. According to appropriate data, in 2015, the national city and county has accumulated garbage incineration ability of about 233,000 bunches/ day. Waste incineration industries advancement momentum is fierce, as well as the brightest of capital chasing even show up numerous times in the last year the rate of handling fee diving, sector raised worries regarding the savage competition. Which is still utilized as the main means of land fill waste, primarily as a result of the regional authorities responsible for taking care of the operations, the market is low, continue to be “low key.”

The future will remain to warm a cold do?

In this regard, some experts explained that, on the one hand, waste incineration will continue to expand, yet the quantity of accumulation and qualitative renovation of equivalent significance, specifically waste incineration discharges formal implementation of brand-new requirements for procedure of the facility as well as set greater requirements; on the other hand landfill as an essential and irreplaceable resource, is still taking care of the mainstream. To discover out the remaining storage space capacity, make great use of excellent monitoring will certainly become vital; at the exact same time, non-canonical makeover land fill, pollution, and so on likewise brought closure to fix the pertinent market chances.

According to the replacement director of the Proving ground for Environmental Wellness Engineering Department of Housing and also General Workers Liujing Hao introduction, center upgrades will be the next 5 years, essential material. “China’s strong waste disposal centers (garbage dump, incineration plant) building and also advancement is very quickly, there are a variety of building as well as operation of the center has a big area for enhancement. There are several old garbage dumps require to maintain as well as update, so as not to pollute the surrounding atmosphere. Several of the early building and construction of incineration plants require to be upgraded or reset.”

Incineration centers is still rising

“Thirteen 5” throughout waste construction market investment space at 1000 billion yuan; the growing garbage incineration ability of the procedure of the center, the regulatory degree obstacles.

‘‘ Facilities’ 2nd five’ plan generally completed the goal. “China Urban Environmental Wellness Association and vice head of state, director of the Research Center for Environmental Health And Wellness Design Department of Real Estate and also Xu Wenlong claimed that according to” the “second five” nationwide city domestic trash treatment center construction plan, “clearly incineration task the total dimension of 307,200 loads/ day. Although completion of 2015, the nationwide overall incineration capacity of 233,000 bunches/ day, but the dimension of the task currently under construction there of about 10 loads/ day, and generally finish the planning as well as building and construction scale.

Planning and conclusion of high passion funding markets has a straight partnership. Construction as well as procedure of waste incineration facility has actually become one of the sectors of resources chasing the parties, after the job in a constant increase to tough “battle.”

The following 5 years, incineration centers building and construction market is still large? In this regard, the Executive President of the Institute of E20 Xue Tao believes that incineration centers will preserve development. “In the building and construction of rubbish ‘‘ Thirteen Five’ period, most likely in the financial investment market room, building area goes to 100 billion yuan.”

Xu Wenlong believes that brand-new market does still have a much better chance. Presently, a lot of the city and also the majority of the region’s trash bin be efficiently accumulated and also therapy and also disposal in sanitary land fill and also incineration plants. Still there are gaps in waste disposal facilities, the brand-new facility is still one of the major tasks of the current and also the next five-year strategy. “According to the relevant national planning, the nationwide MSW incineration capacity in 2020 will go beyond 40 lots/ day in 2025 up to 50 tons/ day. By then, China’s need for incineration facilities will certainly reach a relatively secure state.”

Build-up in the proceeded qualitative enhancement already started. From January 1 this year, all new country, has been running rubbish burner have to perform a new “garbage burning contamination control requirements” (GB18485-2014) (hereinafter referred to as the new criterion) of exhaust limitations. New requirements for traditional pollutants, dioxin contamination contrasted to the previous criterion have a lot more rigid needs.

(Resource: China Association of gravel).
Post Links: China Environmental Protection on the internet http://www.hbzhan.com/news/detail/105016.html 635925914052780791754

卷繞式空氣過濾器與板式初效過濾器孰優孰劣,投入及運行成本分析解剖

2019年05月22日 行業動態 534 views

上篇我們對比了自動捲簾式空氣過濾器與板式初效過濾器的功能優劣勢,但是肯定有用戶覺得由於卷繞式過濾器單價過高,不願在自己的通風過濾系統設計自動卷繞過濾器的情況.

1首次投入成本對比:南京伊希歐Ecolead自動捲簾過濾器初次投入比較大,需要購買含自動PLC控制系統和電機傳動件等整套設備,而初效只需要購買板式過濾器和對應的模塊化固定框架,初期投入初效過濾器完勝卷繞式過濾器

2運行成本對比:自動捲簾過濾器後期只需更換專用濾棉,一卷棉的價格一般1000元以內,便可滿足一年的使用需求,而板式初效過濾器都是整片丟棄,根據截面積大小不同,一次的更換價格都會超過1000元,還要加上人員維護成本。卷繞式過濾器以其低廉的更換濾棉成本完勝初效過濾器。

由此得出結論,雖然卷繞式過濾器的單價高,初期投入成本多,但隨着用戶使用時間的推移,一般2-3年以後,兩者的使用成本持平,後期卷繞式過濾器以其完善的控制系統,低廉的濾料更換成本在初效過濾器家族中脫穎而出,完全勝出。

更多內容 網址: www.ecolead.cn 電話: 025-57138032

Incinérateur hiclover 10kgs par heure

Le plus petit incinérateur de déchets pour petit hôpital
10 kg en moyenne par heure.
avec brûleur double (2) ensembles.

Spécifications techniques des outils

Version

YD-10

Capacité d’alimentation

20 kg typiques par alimentation

Coût de combustion

Régulier 10 kg par heure

Durée de combustion par alimentation

2 ressources humaines

Tension

220V

Gaz

Diesel

Chauffe-eau

Chauffage Italie

Établissement d’alimentation

Guide

Consommation de gaz (pétrole)

5,4-12,6 kg / heure

Capacités externes

100 x 100 x 160 cm (corps principal)

Dimensions intérieures

50 x 50 x 80 cm (chambre secrète)

Chambre de combustion des déchets

200 litres

Article Chambre brûlante

100 litres

Capacité du réservoir d’huile

50 litres

Ouverture de porte

35 x 35 cm

Cheminée

3,0 M

Poids brut

1000kgs

Article de chambre

Béton réfractaire

Max. Vaut la chaleur

126 000 Kcal / heure.

Spécifications techniques de la procédure

Température de la chambre

8000C -10000 C

 Chambre anti-taux 

13500C

 Temps de résidence 

0,5 sec.

Efficacité brûlante

> 98%

Déchets de puissance calorifique inférieure

3000Kcal

HICLOVER – Environnement médical  

Incinérateurs de déchets
Incinérateur de déchets médicaux
Crémation d’animaux de compagnie
Déchets solides   Incinérateur

Tél: + 86-25-8461 0201
Mobile: + 86-13813931455 (whatsapp / wechat)
Site Web: www.hiclover.com
E-mail: [email protected]
E-mail: [email protected]
Nanjing Clover Medical Technology Co., Ltd.

08/02/2020

Double Combustion Chamber Containerized Mobile Incinerator Family Pet Dog Dog&& Pet Cat Cremation Installation and also Appointing

Double Combustion Chamber

All waste burner design with double combustion chamber. High Temperature, Smoke Treatment , No black smoke, Eco-friendly.

Containerized Mobile Incinerator

The incinerator mounted in ISO Container before leave factory, free-installation, no incineration residence develop building and construction, movable by truck.

Family Pet Dog&Cat Cremation

Unique style with movable platform, combustion chamber material as well as personalized made for animals crematory service.

Installation and Commissioning

Clover’s engineers instal, educate for a lot of the region and free-cost train in our factory.