Archive: September 8, 2022

lab organic waste incineration

1- There are greater than 4000 Cubic Meter sludge are packed in Plastic Bags & & kept greater than 10 years
2- Cleaning up and dealt with 2500 Cubic Meters inside the Oil Storage tank.
– – the waste is organic and originating from lab, can be heavily unsafe in case of terror strike or upsurges or similar events.
– – the input is reduced as well as periodic, the laboratory is used when terror or epidemy alarm system occures. But occasionly incineration of human or animal carcasses can be demanded.mobile burner to function together with a mobile biolab for very first responders.is the tiniest incinerator readily available in the marketplace. incinerator of abilities of 10kg/h and 20 kg/h for healthcare facility waste.

blaze biohazard waste

It is not meant to use any type of fuel, such as gas or oil, to encourage the burning of the waste, as the waste items are called to be blazed using a totally free burning process. Hot air however from a downstream process will be available to boost the incinerator temperature in addition to burning rate as needed. Very heats in the burner are not essential and also are not required.

The burning of these waste products is expected to create toxic exhausts which will certainly be cleansed using various other existing downstream processes and an Article Combustion procedure in the incinerator is consequently not needed.

The burner should be capable of fitting an automatic waste feed process.We are seeking incinerator to incinerate biohazard waste of our microbiology laboratory. Our daily waste generation is upto 20 Kg maximum and incinerator will surely be called for on regular basis that is 1 or 2 times a week so you are as a result asked for to suggest the acceptable incinerator for our laboratory that will be affordable for us about investing in and upkeep price.

The burner should be capable of fitting an automated waste feed process.We are seeking incinerator to incinerate biohazard waste of our microbiology lab. Our day-to-day waste production is upto 20 Kg maximum and incinerator will certainly be called for on regular basis that is 1 or 2 times a week so you are as a result asked for to kindly suggest the suitable incinerator for our lab which shall be affordable for us concerning investing in as well as upkeep cost.

Clinical Waste Incenarator Machines

Product Description

PLC( Programmable Logic Controller), Intelligent and Automatic operation. Set combuston time according to different waste material and incinerator stop combustion itself. Set temperature protection parameter, if the temperature overheat, incinerator stop combustion itself. 

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is small animal incinerators, small animal products manufatuter in china, small batch pet crematorium equipment, small capacity incineratores, small ceramic incinerator in indonesia, main waste treatment all of the world, for Medical Waste, Animal Incineration, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world.

Items/Model TS50(PLC)
Picture  
Burn Rate 50 kg/hour
Feed Capacity 100kg
Control Mode PLC
Combustion Chamber 560L
Internal Dimensions 100x80x70cm
Secondary Chamber 280L
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V
Power 0.7Kw
Oil Consumption (kg/hour) 12.1–24
Gas Consumption (m3/hour) 9.9–26.1
Temperature Monitor Yes
Temperature Protection Yes
Oil Tank 100L
Feed Door 70x55cm
Chimney 5Meter
Chimney Type Stainless Steel
1st. Chamber Temperature 800degree–1000degree
2nd. Chamber Temperature 1000degree-1200degree
Residency Time 2.0 Sec.
Gross Weight 4500kg
External Dimensions 230x130x155cm

Jenis pancuran mandian udara kakitangan

2019-05-10 Peralatan pembersihan udara433 paparan



pengenalan produk

Pancuran udara adalah alat untuk membersihkan orang dan mencegah udara tercemar memasuki kawasan bersih. Ia menggunakan aliran udara bersih berkelajuan tinggi untuk menghilangkan zarah-zarah debu di permukaan pakaian atau bahan-bahan yang ada pada personel. Pada saat yang sama, ia juga berfungsi sebagai ruang kunci udara untuk mencegah udara luar mencemari bilik bersih atau bilik bersih tingkat rendah hingga tinggi.

Pancuran udara jenis terowong sesuai untuk bengkel bilik bersih dengan luas dan sebilangan besar pengguna. Bilik pancuran udara dilengkapi dengan tiang keluli tahan karat, yang dapat mengawal personel untuk berjalan di sepanjang rute berbentuk S. Debu proses penyingkiran lebih menyeluruh dan menyeluruh.

Ciri-ciri Produk:

Udara di bilik pancuran udara ditekan ke dalam kotak tekanan statik oleh kipas melalui saringan utama, dimurnikan oleh penapis kecekapan tinggi, dan dikeluarkan dari muncung dengan kelajuan tinggi, sehingga meniup debu yang melekat pada orang dan permukaan objek yang dibawa, dan mencegah udara yang tidak bersih Masuk ke kawasan pemurnian.

Ciri-ciri Produk:

* Struktur produknya kukuh dan senang dipasang
* Sistem kawalan PLC stabil dan efisien. Sekiranya terdapat gangguan kuasa, pintu pancuran udara akan terkunci secara automatik
* Penyaringan dua peringkat kecekapan tinggi awal, kecekapan kecekapan tinggi hingga kecekapan 99,99 %@0.3um

* Kelajuan angin tinggi muncung keluli tahan karat yang boleh disesuaikan 360 darjah

* Mudah untuk menggantikan peranti awal dan cekap
* Dilengkapi dengan lampu pemurnian khas untuk bilik bersih
* Masa tiup boleh laras (10-99 saat)
* Dengan pintu jenama Jerman semakin dekat.

* Fungsi interlock yang boleh dipercayai
* Dilengkapi dengan butang berhenti kecemasan

Lukisan standard

Parameter teknikal

Model spesifikasi

EA-8D-1300

EA-10D-1300

EA-12D-1300

EA-16D-1300

ukuran

W (mm)

1300 (800)

1300 (800)

1300 (800)

1300 (800)

D (mm)

4000 (3920)

5000 (4920)

6000 (5920)

8000 (7920)

H (mm)

2150 (2000)

2150 (2000)

2150 (2000)

2150 (2000)

Bilangan pengguna

8

10

12

16

Bahan

Varnis penaik plat keluli sejuk-sejuk atau SUS304

Pintu gerbang

Varnis penaik plat keluli sejuk atau tingkap kaca temper SUS304 dengan pintu lebih dekat

pencahayaan

12W × 3

12W × 4

12W × 4

12W × 5

Bilangan muncung

Jenis keluli tahan karat / laras arah (jenis tertanam)

48 keping

64 sahaja

72 sahaja

90 sahaja

Bilangan HEPA

Kecekapan penapisan 570 × 570 × 70mm 99.99% (0.3um)

6

8

8

10

PRE FIL TER

570 * 570, G3

6

8

8

10

Kelajuan angin

22 ~ 30m / saat

Kipas

Tekanan statik tinggi dan motor isi padu udara yang besar

Kuantiti

6

8

8

10

kawalan

Kawalan automatik PLC, panel sentuh, masa tiupan LED, dengan petunjuk kesalahan.

Fungsi saling berkait elektronik

kuasa

4560W

6080W

6080W

6080W

bekalan kuasa

3Φ380V

Catatan: Sekiranya anda perlu menambahkan rel keluli tahan karat di dalamnya, tingkatkan lebar dalaman sekurang-kurangnya 1200mm.

Tunjukkan perincian

Muncung keluli tahan karat arah 360 darjah yang boleh dilaraskan

Pintu jenama terkenal Jerman semakin dekat

Tekanan statik tinggi dan motor isi padu udara yang besar

Penapis kecekapan tinggi kertas turas yang diimport A.S.

Lebih banyak URL kandungan: www.ecolead.cn Tel: 025-57138032

捲簾式空氣過濾器與板式初效過濾器孰優孰劣,功能優缺點分析解剖

2019年05月22日 行業動態 571 views

自動捲簾式空氣過濾器與板式初效過濾器作為兩種空氣初級凈化段,新風過濾最常用的兩種過濾器,到底該如何選擇在哪種場所使用,雙方的優勢和劣勢各是什麼,請看如下分析:

1.過濾面積對比:南京伊希歐標準型自動卷繞式過濾器的過濾面積就是其橫截面上的一層平鋪的卷繞式專用過濾棉的面積,單位平面面積與過濾面積一致

板式初效過濾器的濾料是V字形摺疊而成,單位的平面截面積,實際濾料的過濾面積接近2倍,大大的增加了通風量和容塵量,延長了使用壽命

為了彌補卷繞式過濾器的該項缺陷,南京伊希歐Ecolead開發了V型捲簾式過濾器,在對橫截面積固定,通風量過高,標準型卷繞式過濾器風量滿足不了的情況時,使用V型卷繞式過濾彌補過濾面積固定的缺陷,達到使用要求

2.過濾器更換對比:自動卷繞式過濾器顧名思義就是自動更換濾料,不需要人為操作更換濾料,智能化的濾料更換系統,適用於空調機組、冶金煤炭、污水處理廠等含塵量高,需頻繁更換濾料的環境。濾棉一般根據過濾器高度可以使用5-10次不等,也就是基本上一年可以不用人為進入初效過濾系統進行任何操作。待濾料全部用盡后的濾料更換也相當簡單,操作非常便捷,我們曾經對一次的更換濾料的整個過程計時,約3分鐘左右,相當於更換一個模塊的一片初效的時間。

而板式初效過濾器達到壓差值后,需要人力更換,費時費力,整個截面模塊的過濾器更換下來,工作量非常大。

由此可以得出結論,在功能上卷繞式過濾器比初效板式過濾器要方便維護,節省人力成本,若遇到固定面積風量要求標準型捲簾過濾器達不到的情況,可以選用V型卷繞型過濾器來彌補缺陷。

更多內容 網址: www.ecolead.cn 電話: 025-57138032

Medical Waste therapy unit

Medical Waste therapy system

The clinical waste therapy system will be environmentally-friendly, as well as have a capability of
regarding 200-300kg per batch, to enable treatment of medical waste created in a 160-bed
medical facility
The equipment needs to be self-steam creating if
vapor is required for the sanitation procedure.
The medical waste treatment device will can refining the following:
– Bagged waste, in ordinary bags.
– Sharps containers.
– Fluid containers.
– Cardboard containers.
– Steel things.
– Pathological waste.
The clinical waste therapy device will have the ability to
– mix the waste as well as shred it right into little pieces
– disinfect the waste
– Dehydrate the waste.
– Compact the waste to lower its quantity
Unloading of cured waste will be automatic, with more shredding center
All operating features will be safe, automated
1. The whole cycle will be computerized with all important operating specifications secured and also
password shielded.
2. There shall be a documents attribute of the therapy cycle,
The device shall have a hands-on mode of operation in case of failing of the automatic features
The complying with parameters will be displayed:
1. Power on
2. sterilization indicator light
3. auto/manual switch
4. open door warning light
5. vapor pressure
6. cycle chart recorder

fabricant d'incinérateurs de déchets médicaux

MARCHANDISES: UN INCINÉRATEUR SELON LE FOURNISSEUR’
EXIGENCE S PROPRE
PROPOSÉ
SPÉCIFIQUE
TION /
CONFIRMER
ATION
SPÉCIFICATIONS
Murs et toit de l’incinérateur: réfractaire monolithique coulable à 1550 ° C
béton
Température: ≥90 ° C
Isolation des murs: isolation moulable 1000 ° C
Alimentation électrique requise: 220 volts, 15 ampères monophasé
Les contrôles
Contrôle de tirage: indicateur barométrique, limiteur de tirage actionné par la porte
Alimentation en air: conduits d’air à chauffage forcé intégrés, primaire et secondaire
(intensificateur)
Électrique: le panneau de commande comprend des disjoncteurs, un interrupteur principal, une minuterie,
veilleuses, 2 pyromètres de consigne et un pyromètre de consigne
3. expérience et qualifications
Expérience et qualifications
Compagnie
Les entreprises répondant à ces TdR doivent avoir au moins 5 ans
expérience de l’installation et de la maintenance d’incinérateurs ou connexes
domaine. Il doit être enregistré, avoir une licence de commerçant et être conforme
avec des exigences fiscales.
Chef de projet
L’expert proposé doit être en mesure de démontrer une
expérience pertinente de l’exploitation et de l’entretien des incinérateurs ou
gestion environnementale. Le chef de projet doit avoir au moins
un diplôme en gestion environnementale ou en génie mécanique
ou domaine connexe avec au moins 5 ans d’expérience en projet
coordination. Travaux antérieurs au Lesotho ou en Afrique australe
L’expérience de la communauté de développement (SADC) sera un avantage.
Agent de santé et de sécurité
Il / elle doit être un professionnel de la santé et de la sécurité, tel que
la santé et la sécurité au travail; sécurité, santé et environnement, avec
au moins 4 ans dans la réalisation d’inspections de conformité et d’audits de
incinérateurs ou projets de construction. Un minimum d’un diplôme en
la santé et la sécurité ou une discipline appropriée est requise. Avant
l’expérience au Lesotho sera un atout supplémentaire.
37

a pet cremator

11
Burners
Fire Brick, Refractoy Block, Concrete

2
Double Burning Chamber with Integrated In Smoke Filter (Dry Scrubber)

6
220/380 Volt A/c 50 Hz.

10
Summary

1
Incinerator Kind
Feed Setting
Premium Quality European CE Qualified Oil Burner

8
Standard PLC Control Panel

9

an animal cremator for our organization in malaysia.currently we’re doing specific personal cremation in addition to mass cremation for animals along with clinical waste.a burner which can shedding between 3 to 5 tonnes daily of mixed waste items, plastics, rubber, combustible putrescible waste, clinical waste, rubber tyres, paper in addition to cardboard, fabrics, eco-friendly timber waste etc.. As a few of the waste products will include non-flammable solids, the burner should be effective at removing those materials possibly using a rotating kiln procedure.

it’s not intended to utilize any type of gasoline, such as oil or diesel, to market the burning of the waste, since the waste products are essential to be incinerated using a free burning procedure. Warm air however from a downstream procedure will be offered to enhance the burner temperature level and burning rate as needed. Very heats from the incinerator are not needed and are not called for.

The burning of the waste products is expected to create hazardous discharges which will be cleaned up by way of other existing downstream processes and also an Article Burning process from the burner is as a result not required.

The burner must be capable of suiting an automatic waste feed process.Incinerator Requirements

S. No.
Non Corrosive/ Rust Resistant Ideally Stainless for longer Life (Height 5-7 Meter)

7
Oil Tank Capability
Burning Chamber
Burning Capacity
Power Supply

9
Power Supply
220/380 Volt A/c 50 Hz.

10
Oil Tank Capability
200 ~ ~ 300 Litre

11
Burning Chamber
Fire Brick, Refractoy Block, Concrete

Оборудование для кремации домашних животных

описание продукта

ПЛК (программируемый логический контроллер), интеллектуальная и автоматическая работа. Установите время сжигания в соответствии с различными отходами, и установка для сжигания прекратит сжигание. Цены на оборудование для кремации домашних животных, продажа кремаций для домашних животных, фарфор, печь для сжигания кремов для домашних животных, стоимость установки для сжигания кремов для домашних животных, цены на крематорий для сжигания домашних животных, Установить параметр защиты температуры, если температура перегревается, установка для сжигания прекращает горение.

Двойная камера сгорания, время пребывания 2,0 сек. Во вторичной камере сгорания. Практически без дыма и запаха.

Камера дымового фильтра с фильтрующим кирпичом, практически без дыма и запаха после горения.

Оригинальная масляная или газовая горелка Италия, надежное качество. Подходит для дизельного топлива, природного газа, сжиженного нефтяного газа.

Руководство пользователя, полная документация по установке и эксплуатации для клиента.

Предметы / Модель TS50 (ПЛК)
Картина
Скорость сжигания 50 кг / час
Емкость подачи 100кг
Режим управления ПЛК
Камера сгорания 560 л
Внутренние размеры 100x80x70 см
Вторичная камера 280L
Камера дымового фильтра да
Режим подачи Руководство по эксплуатации
Напряжение 220В
Мощность 0,7 кВт
Расход масла (кг / час) 12.1–24
Расход газа (м3 / час) 9,9–26,1
Монитор температуры да
Температурная защита да
Масляный бак 100л
Дверца подачи 70×55см
Камин 5 метров
Тип дымохода Нержавеющая сталь
1-й. Температура камеры 800 градусов – 1000 градусов
2-й. Температура камеры 1000 градусов-1200 градусов
Время проживания 2.0 сек.
Вес брутто 4500кг
Внешние размеры 230x130x155 см

Enormous Incinerator 600 Kgs Per Hour

Product Description

Key Features:  * All versions with Dual combustion chamber.  *based on sequence * High fever, long life of incinerator.  * Free or minimal installation on site.  * High speed, from 10kgs to 500kgs per hourto 6ton daily.  * PLC Control Plane. *based on order  New Design for pet animal cremation enterprise.  * One year guarantee on incinerator and parts in stock.

Items/Model YD-200 YD-300 YD-500 YD-600
Burning Rate (kgs/Hour) 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr. 600 kgs/Hr.
Feed Capacity (kgs) 400 kgs 500 kgs 800 kgs 1100 kgs
Equipment Weight 7600 kgs 8300 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 2000 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 270 x 185 x 380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 180 x 115 x 96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 300 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES