Archive: February 3, 2022

hospital incinerator

* Burner with fuel, mono-bloc casting directing type with flat flame, lighting and security of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.
* A regulator with electronic viewing for the temperature of combustion.
23.     The installed incinerator must bear a one year guarantee.
22. Process Filtering system: Scruber to be mentionned as optional
25. The technical training of operators will have to be supplied and given by a technician from
24. CE Manufacturing Compliance: BS EN 746-2-1997
The factory; it will consist of curative and preventative maintenance, and the use of equipment, etc

NB.: Civil works and any other related services for the installation and training of operators must be included in the incinerator’s cost.
Control box watertight to dust, including:

* A switch circuit breaker for each engine (ventilators and burners).
This material and equipment must include in the drop of the incinerator: foundation in rubble stone, isolation roofing against humudity; elevation with brick of 20 cm (bloc cement), continuing lintel (linteau) in reinforced concrete; steel frame (charpente en metal); roof in sheet B.C.A. 28 BG (Toiture en t?le),metal gutter, sanitary setup (wash basin, soakway pit of 20 m of depth); ash pit of 30 m3,electric installation; concrete slab for fixing the incinerator; chanel for evacuation of rain water or waste water, wire mesh for aeration up the lintel; smooth rougtcasting of walls (interior and outside);plinth with cement; two metal doors;email paintings inside and latex paintings outside the home on walls and on doors; roof limit (planche de rive); steps for this specification will depend on the size of the incinerator which will determine the size of the drop of the incinerator., etc

21. The de- ashing must be done in the bottom of the combustion chamber or the deashing should be Automatic or manual batch de ashing.
22. Process Filtering system : Scruber to be mentionned as optional
23. Emission Standards Compliance: BS 3316 or équivalent standard
23. Capacity to treat Plastic: Not less than 40% by weight
24. CE Manufacturing Compliance: BS EN 746-2-1997
22.    The supplier must give batches of spare parts of first urgency and consumable of the incinerator.
23.    The installed incinerator must bear a one year guarantee.
24.    The supplier shall perforn an onsite installation of the incinerator.
25. The technical training of operators will have to be provided and given by a technician from
the factory; it will consist of curative and preventive maintenance, and the use of machine, etc

NB.: Civil works and any other related services for the installation and training of operators must be included in the incinerator’s price.
Specification for the shelter of the incinerator: House of the incinerator inclusive in offer (the house must have facilities for hand washing and firefighting).
This material and equipment must include in the shed of the incinerator: foundation in rubble stone, isolation roofing against humudity; elevation with brick of 20 cm (bloc cement), continuing lintel (linteau) in reinforced concrete; steel frame (charpente en metal); roofing in sheet B.C.A. 28 BG (Toiture en t?le),metal gutter, sanitary installation (wash basin, soakway pit of 20 m of depth); ash pit of 30 m3,electrical installation; concrete slab for fixing the incinerator; chanel for evacuation of rain water or waste water, wire mesh for aeration up the lintel; smooth rougtcasting of walls (interior and outside);plinth with cement; 2 metal doors ;email paintings inside and latex paintings outside the house on walls and on doors; roofing limit (planche de rive); measures for this specification will depend on the size of the incinerator which will determine the size of the shed of the incinerator., etc

Common 10kgs per human resources burner for small Healthcare facility

This equipment quality structural for kinds of site, like hospital, environmental department, 

animal cremation agencies, etc. 

HICLOVER Incinerator supply updated models with dual combustion chamber, 

mix-combustion chamber and smoke filter 

chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.

Tools Technical Specifications	Version
YD-10C	Image
	Feed Capability
Common 40 kgs per feed	Burning Price
Average 10 kgs per hour	Burning Time each Feed
3.0 -5.0 hrs	Voltage
220V	Power
0.50 Kw	Gas
Natural Gas or Diesel oil	Heating unit
Italy Heating Unit	Feed Mode
Guidebook	Gas usage (Oil)
4.4-9.4 Kgs/Hour	Gas ingestion (Gas)
5.3-11.2 m3/Hour	Outdoors Measurements
170 x 140 x 160cm (mainbody)	Inside Measurements
55 x 55 x 65cm( Trick Chamber)	Waste burning chamber
200Liters	Write-up Combustion Chamber
140Liters	Oil Container Capability
50 Litres	Door Opening
38 x 48cm	Chimney
5.0 M	Gross Weight
1800kgs	Chamber Product
Refractory Concrete	Max.
Operation Technical Specs
Solid Chamber temperature level	8000C -10000 C
Gas Chamber temperature degree	10000C -12000 C
Chamber Anti-Rate	13500C
Residency time	2.0 Sec.
2.0 Sec.	Burning efficiency
＞ 98%	Waste Lower Calorific Power

3000Kcal

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.