Archive: February 7, 2022

waste

50kgs per hour burner with Two chambers vendors from china

Feb 7, 2022 by hiclover 0 Comments #waste-incinerator

50kgs per hour incinerator with two chambers suppliers from china
*Aveage 50kgs per hour
*Double chamber and double burner
*900liters primary combustion chamber
*Italy burner
*Stainless steel chimney

Variation

YD-50

Burning Cost

Average 50 kgs/hour

Feed Ability

Typical 150 kgs

Primary Burning Chamber

900 Litres

Additional Combustion Chamber

300 Litres

Mix Burning Chamber

Yes

Smoke Filter Chamber

Yes

Feed Setting

Guide

Voltage

220V/380V

Power

0.7 Kw

Gas Type

Diesel Oil/ All-natural Gas/LPG

Heater

Italy Original

Oil Usage (Diesel Oil)

12.1– – 23.9 kg/hour

Gas Intake (Gas)

9.9– – 26.1 m3/hour

Interior Measurements

120 x 90 x 85cm (trick chamber)

Outdoors Measurements

200 x 160 x 310cm (without smokeshaft)

Temperature Level Monitor

Yes

Oil Container Ability ( if oil gas)

300 Litres

Door Opening

62 x 80cm

Smokeshaft Size

5.0 Meters

Chimney Kind

Stainless-steel

Devices Gross Weight

5500 kgs

Procedure Technical Specs

Trick Chamber Temperature

800 ℃–– – – -1000 ℃

Secondary Chamber Temperature Level

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Burning Performance

＞ 98 percent

Waste Lower Calorific Power

Medical Environmental 

3000Kcal

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

waste

Équipement de traitement des déchets médicaux

Feb 7, 2022 by hiclover 0 Comments #Français

Informations de base.

N ° de modèle: fabricants d’incinérateurs de déchets médicaux en Chine
Marchés d’exportation: mondiaux

Description du produit

Nanjing Clover Medical Technology Co., Ltd. est l’un des principaux fabricants d’incinérateurs de déchets en Chine. Nous sommes un fabricant local et l’un des plus grands exportateurs de Chine. L’équipement technique d’incinérateur pyrolytique est le principal traitement des déchets dans le monde entier, pour les déchets médicaux, l’incinération animale, la crémation des animaux domestiques et autres déchets solides. La capacité de 10 kg / h. Jusqu’à 500 kg / heure, la combustion des animaux de crémation, l’équipement de crémation des animaux, la combustion de l’équipement de crémation des animaux, le coût de l’équipement de crémation des animaux, l’équipement de crémation des animaux pour la Chine d’incinération, jusqu’à 6 tonnes par jour. Actuellement, nous fournissons différentes séries pour les besoins des clients locaux et concevons un incinérateur mis à jour avec notre technologie de pointe. La conception mise à jour de notre gamme d’incinérateurs en fait l’un des plus rentables au monde.

Principales caractéristiques:
* Tous les modèles avec double chambre de combustion.
* Cheminée / cheminée en acier inoxydable, longue durée de vie. * selon commande
* Haute température, longue durée de vie de l’incinérateur.
* Installation gratuite ou minimale sur site.
* Taux de combustion élevé, de 10 kg à 500 kg par heure, jusqu’à 6 tonnes par jour.
* Plan de contrôle PLC. * selon commande
* Nouveau design pour les entreprises de crémation d’animaux de compagnie.
* Garantie d’un an sur l’incinérateur et les pièces en stock.

Articles / modèle YD-30 YD-50 YD-100 YD-150
Taux de combustion (kg / heure) 30 kg / heure 50 kg / heure 100 kg / heure 150 kg / heure
Capacité d’alimentation (kg) 60 kilogrammes 150 kilogrammes 200 kilogrammes 300 kilogrammes
Poids de l’équipement 2300 kilogrammes 4000 kilogrammes 4300 kilogrammes 7000 kilogrammes
Chambre primaire (litres) 360 900 1200 1500
Chambre secondaire (litres) 200 200 500 500
Dimensions extérieures (cm) 145 x 90 x 175 200 x 160 x 230 220 x 180 x 360 240x170x380
Dimensions internes (cm) 100 x 60 x 60 120 x 90 x 85 130 x 100 x 90 150 x 100 x 96
Réservoir d’huile (litres) 200 300 300 500
Ouverture de porte (cm) 48 x 60 62 x 80 55 x 80 59 x 81
Cheminée (M) 5 5 dix dix
Type de cheminée Acier inoxydable Acier inoxydable Acier inoxydable Acier inoxydable
Chambre secondaire OUI OUI OUI OUI
Chambre de mélange-combustion OUI OUI OUI OUI
Chambre de filtre à fumée OUI OUI OUI OUI
Combustible de combustion Gaz de pétrole Gaz de pétrole Gaz de pétrole Gaz de pétrole
Temps de résidence 2,0 sec. 2,0 sec. 2,0 sec. 2,0 sec.
Surveillance de la température OUI OUI OUI OUI
waste

Incinerator (MSW5500)

Feb 7, 2022 by hiclover 0 Comments #Blog

Basic Info.

Model NO.:MSW5500
Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Nanjing Clover Medical Technology Co., Ltd. Is a leading waste incinerator manufacturer in China. We are local manufacturer and one of the largest exporter of China. Pyrolytic incinerator equipment technical is main waste treatment all of the world, for Medical Waste, Animal Incineration, incinerator + chinese manufacturers, incinerator + incinerator to burn 50kg, incinerator 100, incinerator 100kg, incinerator 10kcal price, Pet cremation and other Solid wste. The capacity from 10kgs/Hr. To 500kgs/Hr., up to 6ton per day. Presently, we supply different series for local customer requirements and design updated incinerator with our leading technology. The updated design feature of our range of incinerators make them one of the most cost effective in the world. 

Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock.

Items/Model MSW2000 MSW3000 MSW4000 MSW5500
Burning Rate  150 kgs/Hr. 200 kgs/Hr. 300 kgs/Hr. 500 kgs/Hr.
Feed Capacity  400 kgs 600 kgs 800 kgs 1100 kgs
Equipment Weight 7600 kgs 9500 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 2000 3000 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 270x185x380 280x230x425 320x220x460 360x220x475
Internal Dimensions (cm) 180x115x96 240x120x105 257x147x108 300x147x125
Oil Tank(Liters) 300 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chmaber Temperature 1000degree-1200degree 1000degree-1200degree 1000degree-1200degree 1000degree-1200degree

Malaysian

Gudang bersih yang dibeli oleh Qingdao Yanjing Electronics Co., Ltd. (syarikat Korea) dihantar dengan lancar

Feb 7, 2022 by hiclover 0 Comments

2019-05-18 Berita Syarikat378 paparan

3 set ruang bersih anti-statik modular yang dipesan oleh Qingdao Yanjing Electronics Co., Ltd. dan syarikat kami berjaya diterima!

Qingdao Yanjing Electronics Co., Ltd. adalah syarikat milik penuh Korea Selatan yang ditubuhkan pada tahun 1995 dengan modal berdaftar US $ 3,41 juta. Ia menghasilkan komponen elektronik audio-visual, pembuatan acuan dan pemprosesan logam, air pancut dan alat ganti. Produk syarikat kami terutamanya merangkumi fon telinga dan penyumbat telinga, Thermostat, BELLOWS, dispenser air. Ia telah menjalin hubungan kerjasama jangka panjang dengan SONY Jepun, Panasonic, Toshiba, LG Korea Selatan, dan Samsung.

Di sini kami memperkenalkan secara ringkas

Tempat pembersih kecil digunakan secara meluas di tempat-tempat yang memerlukan pemurnian tempatan. Untuk menutup ruang kecil di ruang bilik yang bergelora dengan kain plastik lutsinar anti-statik, gunakan unit peniup udara bebas HEPA atau ULPA dan penghawa dingin untuk menjadi lebih tinggi tingkat Ruang bersih adalah 100 ~ 1000, dan ketinggian dalam kira-kira 2.0 meter. Tiang boleh dilengkapi dengan roda bergerak, yang dapat digunakan dengan fleksibel.


Ciri-ciri Nanjing Clean Shed-Small Clean Room adalah: pelaburan rendah dan kecekapan tinggi; walaupun bilik bersih dengan tahap pemurnian yang lebih tinggi dibina di bilik bersih yang ada, ia tidak akan mempengaruhi pengeluaran normal. Reka bentuk yang fleksibel dan pelbagai membawa kemudahan dan kepraktisan maksimum kepada pelanggan.

Peralatan ini banyak digunakan dalam industri seperti paparan fotolistrik, mikroelektronik, pembungkusan aseptik, makanan, peralatan perubatan, farmasi, dan lapisan bebas debu.
Penerangan mengenai parameter yang berkaitan dari gudang bersih: Struktur rangka sokongan FFU, langsir anti-statik, dan lain-lain dapat dipasang ke dalam berbagai ukuran 100-100,000 bilik bersih dan jalur produksi yang bersih


Ciri-ciri tempat bersih:
1. Reka bentuk struktur modular dan pemasangan, pembinaan mudah, dapat memendekkan masa pembinaan di tapak;
2. Berbanding dengan bilik bersih awam, kosnya rendah;
3. Ia sesuai untuk pembinaan kawasan bersih kecil.

Lebih banyak URL kandungan: www.ecolead.cn Tel: 025-57138032

waste

Incinerator A4000

Feb 6, 2022 by hiclover 0 Comments #English

Basic Info.

Model NO.:A4000
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER

Product Description

Nanjing Clover Medical Technology Co., Ltd..

Items/Model A1500 A2400 A4000 A5500
Burning Rate *animal 90 kgs/Hr. 150 kgs/Hr. 200 kgs/Hr. 400 kgs/Hr.
Feed Capacity *animal 120 kgs 200 kgs 300 kgs 500 kgs
Equipment Weight 7000 kgs 8300 kgs 13000 kgs 16500 kgs
Primary Chamber (Liters) 1500 2400 4000 5500
Secondary Chamber (Liters) 500 1200 1500 1500
External Dimensions (cm) 240x170x380 260x220x420 320x220x460 360 x 220 x 475
Internal Dimensions (cm) 150x100x96 220x110x100 257x147x108 300 x 147 x 125
Oil Tank(Liters) 500 500 500 500
Door Opening (cm) 59 x 81 90 x 110 108 x 128 108 x 128
Chimney (M) 10 10 14 14
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber  YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chmaber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree

Key Features:  * All models with Dual combustion chamber.  * Stainless Steel chimney/stack, long lifetime. *according to order  * High temperature, long lifetime of incinerator.  * Free or minimum installation onsite.  * High speed, from 10kgs to 500kgs per hour, up to 6ton daily.  *according to order  New Design for pet animal cremation enterprise.  * One year warranty on incinerator and parts in stock.

Waste Incinerators

Livestock Incinerators

Feb 6, 2022 by hiclover 0 Comments
We are having serious concern in expanding our operation in Agricultures, especially in Breeding Livestock section, which involves Pig Production as well.Our vision is to develop herd of 500,000 marketed pigs within 5 years, which supplied 1,000,000 porkers to the market yearly.
We concern how to handling with pig’s placenta and mortality from newborn pig, from piglets to weaner, from weaner to finisher (Pig Carcass Waste) . I find out that your company is a supplier which specialized in incinerator for Pig Farm so I am writing to request you consultant us what incinerator is suitable with our Pig Farms.
About the general idea, Hoa Phat would like to build 1250 Nucleus Farms (including Weaners, Gilts, Replacement) and 6000 Finisher Farms.
At our calculated, for 1 farm 1250 sows we have:
100 placentas per day (1 placenta weight ~ 200-300g)
6 newborn pigs dead per day (1 newborn weight ~ 1,5kg)
8,4 piglets dead per day (1 piglet weight ~ 3kg)
2,6 weaner dead per day  (1 weaner weight ~ 20kg)
waste

30kgs medical waste heater Design TS30 PLC.

Feb 6, 2022 by hiclover 0 Comments #waste-incinerator

30kgs per hour(average) medical waste incinerator, design dual 
combustion chambers(primary chamber and secondary chamber), 
smoke filter chamber, PLC auto. control system, 0.33m3(330liters)
primary combustion chamber, italy oil or gas fuel burner. for small 
hospital medical waste treatment.
Buy waste incinerator, find hiclover

Items/Model

TS30 PLC

Idea

Waste Incineration

Burn Rate

Criterion 30kgs/hour

Gas Kind

Diesel Oil/Natural Gas

Control Setting

Programmable Thinking Controller( PLC) Panel

Key Combustion Chamber

0.33 m3

Inner Measurements( Main )

750x750x600 mm

Secondary Burning Chamber

0.18 m3

Internal Dimensions( Secondary)

400 x 750 x 600 mm

Smoke Filter Chamber

Yes

Feed Establishing

Guidebook

Voltage

220V

Power

0.5 Kw

Oil Intake

10.2– – 20.0 kgs/hour

Gas Consumption

9.8– – 20.0 m3/hour

Temperature Display

Digital Program

Temperature Level Protection

PLC Control

Time Placing

PLC Control, 0-120 Minutes

Oil Container

100 Liters

Waste Feed Door

550x500mm

Smokeshaft

5.0 Meter

Smokeshaft Kind

Stainless-steel

Key Chamber Temperature Degree

800 ℃–– – – 1000 ℃

Additional Chamber Temperature Degree

1000 ℃ -1200 ℃

Residency Time

2.0 Sec.

Gross Weight

3000kgs

External Measurements

1750x1200x1400 mm

 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator
Medical Environmental 

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

Auto Roll Air Filters

Notice about all employees of the company participating in the promotion of the company's official website

Feb 6, 2022 by hiclover 0 Comments

May 18, 2019 company news 276 views

In order to better publicize the company’s website and promote the company’s main products: clean sheds, winding filters, air showers and other related sales work, the company’s leaders have decided that all employees of the company will participate in the promotion of the company’s official website. The specific work as follows:

Website promotion time: Everyone takes half an hour to participate in website promotion every day.

Website promotion matters:

① The company’s front desk and consulting staff, help the company’s website content fillers, and do a good job of editing the company’s news columns.

②The company’s product technicians and engineers, to help the company’s website content filling personnel, do a good job in editing, adding and modifying solutions and product knowledge columns.

③Company managers and other colleagues, help the external chain builders of the company’s website, do a good job in the construction of external shops on the company’s official website, the release of information classification and the publicity of the forum.

In the near future, it is an important time for the company’s clean shed, winding filter, air shower and other related businesses to develop. For the long-term development of the company, I hope that every colleague will develop hard-working and meticulous work to make the website promotion work in place and contribute to the company’s long-term development. contribution. Those with outstanding performance will register outstanding contributors to the department leader based on the actual situation, and the leader will give awards based on the actual situation of the department.

Nanjing Yixiou Technology Development Co., Ltd.

Time: Thursday, October 20, 2016

More content URL: www.ecolead.cn Tel: 025-57138032