Archive: December 13, 2021

Установка для сжигания отходов животных

Базовая информация.

Номер модели: инсинератор для домашних животных для продажи
Экспортные рынки: глобальный

описание продукта

Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитических инсинераторов – это основная обработка отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. Расчет мощности инсинератора, расчет мощности инсинератора, мощности инсинераторов медицинских отходов, вместимость 30 кг, производительность 300 кг / час. В настоящее время мы поставляем различные серии для требований местных заказчиков и проектируем обновленные инсинераторы с использованием наших передовых технологий. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.
Ключевая особенность:
* Все модели с двойной камерой сгорания.
* Дымоход / дымоход из нержавеющей стали, долгий срок службы. * по заказу
* Высокая температура, длительный срок службы инсинератора.
* Бесплатная или минимальная установка на месте.
* Высокая скорость сжигания, от 10 кг до 500 кг в час, до 6 тонн в день.
* Плоскость управления ПЛК. * по заказу
* Новый дизайн для кремации домашних животных.
* Один год гарантии на инсинератор и запасные части.

Предметы / Модель A1500 A2400 A4000 A5500
Скорость горения * животное 90 кг / час. 150 кг / час. 200 кг / час. 400 кг / час.
Емкость корма * животное 120 кг 200 кг 300 кг 500 кг
Вес оборудования 7000 кг 8300 кг 13000 кг 16500 кг
Первичная камера (литры) 1500 2400 4000 5500
Вторичная камера (литры) 500 1200 1500 1500
Внешние размеры (см) 240x170x380 260x220x420 320x220x460 360 х 220 х 475
Внутренние размеры (см) 150x100x96 220x110x100 257x147x108 300 х 147 х 125
Масляный бак (литры) 500 500 500 500
Дверной проем (см) 59 х 81 90 х 110 108 х 128 108 х 128
Дымоход (M) 10 10 14 14
Тип дымохода Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь
Вторичная камера ДА ДА ДА ДА
Камера смешанного сгорания ДА ДА ДА ДА
Камера дымового фильтра ДА ДА ДА ДА
Горючее топливо Нефтяной газ Нефтяной газ Нефтяной газ Нефтяной газ
Время проживания 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек.
Контроль температуры ДА ДА ДА ДА

Animal Carcass Incinerators

Basic Info.

Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:clover

Product Description

2011 year is an important foundation for us. We reach to developed country market and stabilize our old customers. Our incinerator use in Southeast Asia, incineration burner, incineration chamber, incineration chien de 50 kilos, incineration disposal of solid waste, incineration equipment manufacturer, Central Asia, Europe, Middle East, Africa and Australia, etc. Clover Incinerator has grown to be one of the famous and biggest incinerator supplier all over the world. 

Key Features: 
* All models with Dual combustion chamber. 
* Stainless Steel chimney/stack, long lifetime. *according to order 
* High temperature, long lifetime of incinerator. 
* Free or minimum installation on site. 
* High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. 
* PLC Control Plane. *according to order 
* New Design for pet animal cremation business. 
* One year warranty on incinerator and parts in stock.

Item Customer Request Example
Application Scope  
 
 
 
Hospital, Pet Crematory, Slaughter House, Laboratories, School, Community, etc. if for animal/pet, indicate animal size like: cat, dog, cattle, etc
What kind of waste?  
____, _____%
____, _____%
____, _____%
 
 
Medical waste, dead animal, Municipal Waste, etc(detail name) or nature percent
if for animal/pet, indicate animal size like: cat, dog, cattle, etc
Quantity Request    
01.02.03^…unit
 
Budget    
$US Dollar.
 
 
Operating Time    
The staff work Hours per day.
Our incinerator can work up to around 18 hours per day.
Realization Date of project In ___ year  
Waste Output Capacity per Day?  
 
1000kgs Per Day^
Request waste burn rate   Capacity: 100kgs Per hour^
Request waste feed capacity   Capacity: 100kgs per feed^
Whether Natural Gas Supply Local?   Yes or No.
Local Power   If 380V and 220V valid?
Product Installation Destination  
 
Country or City name
DestinationSeaport name?   To check sea freight charge.
 
Customer    
End-Customer, Agent, Government.
 
Method of contract   Tender or Negotiation
Date of Tender limit    
How did you know our company?    
Other request or information  
 
 
 

محرقة ما بعد الاحتراق

وصف المنتج

المحرقة عبارة عن معدات حرق ، نفايات حريق مباشر بواسطة وقود الغاز أو الوقود النفطي. كطوق مختلف ، يمكن تسمية المحرقة بالعديد من الكلمات على النحو التالي:

قدرة المعالجة: محرقة صغيرة الحجم ، محرقة واسعة النطاق وبانت حرق.

مواد النفايات: محرقة النفايات البلدية ، النفايات الطبية المتولدة في غانا ، النفايات الطبية في أذربيجان ، النفايات الطبية في الصين ، النفايات الطبية في الصين h5n1 ، محارق النفايات الطبية في هراري ،
محرقة نفايات طبية ، محرقة جثث حيوانات ، محارق جثث بشرية

وقود المحرقة: محرقة الغاز ، محرقة الزيت

تحويل النفايات إلى طاقة (WTE): محرقة WTE ، محرقة لا تستخدم WTE

الشركة المصنعة للمحرقة: الشركة المصنعة للمحرقة في الصين ، الشركة المصنعة للمحرقة في المملكة المتحدة ، الشركة المصنعة للمحرقة بالولايات المتحدة الأمريكية ، الشركة المصنعة للمحرقة في الهند.

الشركة المصنعة للمحرقة الشهيرة: Inciner8 (UK) ، Clover Incinerator (الصين) ، Pennram (الولايات المتحدة الأمريكية) ، Haat (الهند)

معدل الحرق: 5 كجم / ساعة ، 10 كجم / ساعة ، 15 كجم / ساعة ، 20 كجم / ساعة ، 30 كجم / ساعة ، 50 كجم / ساعة ، 100 كجم / ساعة ، 150 كجم / ساعة ، 300 كجم / ساعة ، 500 كجم / ساعة

دلائل الميزات:

* جميع الموديلات بغرفة احتراق مزدوجة.
* مدخنة / كومة من الفولاذ المقاوم للصدأ ، عمر طويل.
* ارتفاع درجة الحرارة ، وعمر طويل من المحرقة.
* تثبيت مجاني أو بحد أدنى في الموقع.
* معدل حرق مرتفع ، من 10 كجم إلى 600 كجم في الساعة ، حتى 10 طن في اليوم.
* طائرة التحكم PLC للتشغيل الذكي.
* تصميم جديد لأعمال حرق جثث الحيوانات الأليفة.
* ضمان لمدة سنة على المحرقة والأجزاء الموجودة في المخازن.

العناصر / النموذج TS10 (PLC) TS20 (PLC) TS30 (PLC) TS50 (PLC) TS100 (PLC)
معدل الاحتراق 10 كجم / ساعة 20 كجم / ساعة 30 كجم / ساعة 50 كجم / ساعة 100 كجم / ساعة
سعة الأعلاف 20 كجم 40 كجم 60 كجم 100 كجم 200 كجم
وضع التحكم PLC PLC PLC PLC PLC
غرفة الاحتراق 100 لتر 210 لتر 330 لتر 560 لتر 1200 لتر
خفض الماوس لعرض الإجابة 50x50x40 سم 65x65x50 سم 75x75x60 سم 100x80x70 سم 120x100x100 سم
الغرفة الثانوية 50 لتر 110 لتر 180 لتر 280 لتر 600 لتر
غرفة مرشح الدخان نعم نعم نعم نعم نعم
وضع التغذية يدوي يدوي يدوي يدوي يدوي
الجهد االكهربى 220 فولت 220 فولت 220 فولت 220 فولت 220 فولت
قوة 0.5 كيلو واط 0.5 كيلو واط 0.5 كيلو واط 0.7 كيلو واط 0.7 كيلو واط
استهلاك الزيت (كجم / ساعة) 5.4 – 12.6 7.8 – 16.3 10.2 – 20 12.1 – 24 14 – 28
استهلاك الغاز (م 3 / ساعة) 6.2-11.4 8-15.7 9.8 – 20 9.9 – 26.1 10 – 32.2
مراقب درجة الحرارة نعم نعم نعم نعم نعم
حماية درجة الحرارة نعم نعم نعم نعم نعم
خزان النفط 100 لتر 100 لتر 100 لتر 100 لتر 200 لتر
باب التغذية 30×30 سم 45×40 سم 55×50 سم 70×55 سم 80×60 سم
مدخنة 3 متر 3 متر 5 متر 5 متر 10 أمتار
نوع المدخنة ستانلس ستيل ستانلس ستيل ستانلس ستيل ستانلس ستيل ستانلس ستيل
وقت الإقامة 2.0 ثانية. 2.0 ثانية. 2.0 ثانية. 2.0 ثانية. 2.0 ثانية.
الوزن الإجمالي 1500 كجم 2200 كجم 3000 كجم 4500 كجم 6000 كجم
الابعاد الخارجية 140x90x120 سم 160x110x130 سم 175x120x140 سم 230x130x155 سم 260x150x180 سم

اتصل الآن هاتف: + 86-25-8461 0201

The other day in the waste incineration plant

Recently a dream came true for me. I had the opportunity to participate in a guided tour through the waste incineration plant in Cologne. That may seem strange. Sometimes I catch myself when I get stuck on documentary programs about recycling methods in the (rare) zapping through the TV channels. Obviously this topic fascinates me.

The BVMW (Federal Association of Medium-Sized Enterprises) invited to a lecture on the topic of generation Y. Host and the venue was the waste recycling company in Cologne, AVG, which offered additionally a guided tour through their waste incinerator. Since I am also very interested in the topic Generation Y, I could kill two birds with one stone.
In a small group, we were led by the spokesman of the AVG through the various sections of the waste incineration plant and the procedures were explained in detail. Initially skeptical, because in previous years there was so much negative about this facility (excessive construction costs, lack of capacity), the mood among the participants changed gradually into fascination.

To clarify: It’s just about waste. Not about recycle materials such as paper, plastics, recycled glass or compostable organic waste.

Precision and cleanliness

What I noticed during the tour: In the plant, each step is carefully considered, it is worked with great precision. And even if that sounds paradoxical: it is squeaky clean! Only in the hall where different wastes are mixed on conveyor belts, there is the typical smell of rubbish, but also not as bad as originally expected.

Amazing for me: I did not know that by using residual waste a really large amount of power is generated. And reassuring for me: resources are won even from the last drop: metal, material for road construction, plaster in good quality. The proportion of what is factually left and actually not recycled, seems negligible to low.

From waste to electricity – the process in detail

The residual waste incinerator in Cologne was put into operation in 1998 and is one of the most modern and best facilities in the world. It processes what has landed in the residual waste after the separate collection of private households, as well as the remains of sorting from mixed building and industrial waste.

Much of the waste is shipped by rail. The railway containers are loaded in two waste transfer stations in the city of Cologne and together have a capacity of approximately 250,000 tons per year. The remaining waste is brought by truck.
A special feature of the Cologne residual waste incinerator is the integrated treatment of the waste in a treatment room. Residues from sorting and residues from the domestic and bulky waste are first distributed to the daily waste bunker on separate chambers. The bulky waste is pre-sorted and crushed. Only the non-recoverable components are processed in the incinerator.

The household waste is sorted in a perforated drum to size and then passes on large conveyor belts so-called magnetic seperators. They remove ferrous scrap. A second ferrous metal deposition as well as an automatic non-ferrous deposition take place after combustion.

Even commercial waste residuals are delivered to the Cologne plant. They have been processed previously in external sorting, so they can be added directly to the domestic and bulky waste. The various waste streams are mixed thoroughly, because this homogenization ensures a high quality, a uniform as possible burnout and a good quality ash.
From the huge hall of the conveyor belts the waste enters the so-called residual waste bunker. Here it is stored a while until enough moisture has dissipated, so that it can burn well. By means of permanent temperature and humidity indicators it is controlled, in what condition the waste is. With large gripping cranes the waste is rearranged and finally placed in the kiln. The garbage gripper fill four huge funnels. The waste comes from here in four independently powered boilers that operate around the clock. The waste moves on roller grates through the boiler. And there it burns. At an unimaginable heat of 1,000 to 1,500 degrees Celsius. The respective “new” waste ignites from the already burning garbage. So no additional external energy is required for the combustion process. The combustion takes place after the DC principle: The burning of waste and the waste gases move in the same direction through the “hot flame” at the end of the grate. This procedure ensures that the destruction of pollutants such as dioxins and furans are already done in the combustion chamber.

From waste is made power for 250,000 people

And here is the highlight. The heat produced during combustion is used. On the one hand, to heat the nearby Ford plant. But this is just a nice side effect. The majority of the heat is converted into electricity by generators. And even that much that the power consumption of 250,000 people can be met. The waste incineration plant Cologne is thus basically a power plant and supplies a quarter of the city of Cologne with electricity. That sounds awesome. And since you could get the idea that it is not so bad when so much garbage is produced – as it is used so well …

After combustion bottom ash, hot exhaust gas and residues remain. These substances are largely used again useful: The ash is cooled with water and stored in an ash bunker before it is processed in a bottom ash treatment plant and then utilized in road, landfill and landscaping.
The hot exhaust gas is used for power generation. It heats preheated water to steam, which meets at a temperature of 400 degrees Celsius and a pressure of 40 bar to a turbine. This drives the downstream generator with which is produced electric power. For own use only a small part of the energy is needed. The greater part is given in external power supply networks. The amount of energy generated in the incinerator is enough to power more than 100,000 households.

In the combustion and the subsequent exhaust gas purification residual substances such as dust and salts remain as well as ashes from the boiler. These materials are collected and used as backfill material for the backfilling of salt mine tunnels. Gypsum is also a waste material, which is obtained as a reaction product in the exhaust gas purification and has building material quality.

Emission control: the exhaust gases are almost completely neutralized by the method used at the Cologne incinerator. There is no waste water, as well as the legal requirements are clearly undercut. As a neutral auditor, the county government gets the actual exhaust gas readings permanently by direct line.

Rethinking at waste management companies

After the guided tour, I had the opportunity to talk to the press officer of AVG. In this conversation it became clear how much the thinking has changed in the field of waste management in recent decades and years. While during the 1960s to the 1990s garbage was piled up completely unsorted in landfills and then forgotten, in the new millennium they have recognized the value of the waste. Climate change and CO2 emissions have long pushed as important issues in focus for the residual waste processing. The heat generated during combustion is converted into electricity. Resources are regained, as far as is technically possible. Especially metal, plastics and wood. The recovered plastic from residual waste is used for example as fuel for cement plants.

Waste incineration plant are nowadays equatable to power plants, even if the fuel value is not quite equivalent to the conventional fuels such as coal, oil and gas. As more and more municipalities have come to generate their own electricity by means of residual waste incineration, the major electricity providers get in significant difficulties.

At the end of the tour I was really impressed. That what is put in the residual waste in private households plus the commercial waste is, after all, still god to supply 100,000 households with electricity in Cologne.

And at the same time it’s scary, what incredible tonnes of waste we produce. Yellow and blue ton even come on top of that.

Consumer society provides garbage

Waste incineration plants generating electricity for us and making us less dependent on fossil fuels, are the logical consequence of our consumer society. But incinerators are not built primarily to generate electricity. But to become master of the mountains of waste that we produce continuously as a consumer society. Fortunately, with modern incinerators, a way has been found to make up the stinking problem a clean thing. But the cause, our consumption, is the real problem.

For the operators of the incineration plant, it is essential that enough waste is delivered. Garbage is their product. The more they can get, the better for the system’s capacity. For then it will work cost-effectively, which in turn has a positive impact on the urban garbage fees. Not all incinerators in Germany are so well utilized as in Cologne. Since waste is added from adjacent areas.

But the consumer society provides these masses of garbage. Goods are produced in large quantities, purchased, used or consumed and eventually discarded. The 2aste incineration plant gets food – in 2013 there were 707,000 tons in Cologne. And provides us even with power (282 million kWh in 2013 in Cologne). Actually a perfect cycle, so one might think. If not for this “but” would be. Because our conventional consumption goes at the expense of other countries, to the detriment of the environment, fair working conditions; Resources are wasted, the transport around the globe has impact on the climate, production facilities in the Far East poison the local environment and so on.

Well, I live in Cologne, a big city, where certainly only a small proportion of residents think about trash, disposal or even waste reduction and also practice this. That may be a negative point of view, but I think it is realistic. The average normal citizen does not necessarily ask the question what is actually happening to what he throws away in the course of a year. All the more it is interesting to follow the different paths. My next wish is to visit a recycling plant for plastics.

Waste incineration and waste seperation versus waste prevention

Waste separation was yesterday. The latest approach is waste prevention. In its most distinct version it is called Zero Waste. No waste. So far there are only a few pioneers, whose reports and videos I read and watch with interest. And at the same time I wonder how to implement this in a normal big-city life. It starts with the fact that – even if you use a togo box, which is compostable, then you do not know where to dispose of it along the way. So take it home and put it in the compost bin? Would everybody do that?

I think it’s great if it is possible, to be master of the situation (immense amounts of waste) through a well organized disposal system and beyond even to convert this residual waste to a large extent into energy, ie electricity and heating. There is at least a huge improvement as against the stinking landfill from earlier, in which everything was thrown into a pile and then covered with the cloak of silence. The next step must be, to reduce the amount of waste in total. And this will not be possible just by the civil society. Here politics and economy are asked to create the right framework and to set the practical implementation in motion.

by: http://blog.upcycling-markt.de/en/blog/muellverbrennungsanlange-waste-incineration-plant.html

animal waste incinerator

secondary chamber

1000 level

 

chimney

standard

 

shredder

separately

 

Autoclave or microwaves

separately

 

temperature screen

attached outside of machine

 

operating

Fuel and electric

During the beginning and finish incineration operations at the waste incineration plant the temperature shall be kept

at 850 °C, while it shall be 1100 °C when incinerating dangerous waste containing halogenated organic substances with

content of chlorine or its compounds. The temperature shall be kept at 1000 °C through incineration of health

waste.

MUNICIPAL SOLID WASTE INCINERATORS

 

Municipal waste incinerator quantities and capacities shall be designed for 24-hour 7-day-a-week continuous operation.

 

Incinerators shall be capable of processing both wet and dry material and operating on each diesel fuel, JP-8 fuel,

 

or waste oil; see Plumbing for fuel storage system requirements. The following shall be provided as a minimum:

 

Reinforced concrete mounting foundations, feed or charging hoppers (or loaders), main combustion chambers

 

with ash cleanout doors, secondary combustion chambers using ash cleanout doors, cyclone air filters (or separators),

Clover Medical Incinerator

Product Description

5. What’s the shipping document? — Nov. 30, 2011 

Shipping document mean after the seller delivery equipment in China sea port, seller will send some document to buyer. After buyer receive equipment at local sea port, they use these document to make custom clearance and also some other certificate document request by buyer self. Our standard shipping document is (a. )bill of lading(if by train, called way bill), bill of lading is key documents of title, but way bill is not. (b. ) invoice from seller, and (c. ) packing list. 
When equipment ship to different country, local custom request some different document or certificate. For example, ship to Egypt, they need embassy certificate of invoice and C/O and also inspection before shipping. Other document like, C/O, Fumigation Certification, F/A, BV/SGS/SONCAP…Buyer should make clear all of these first and all these document need time and extra cost to make. 
We had a customer who is a freshman of this field. Before we pyrolitic incenerator China, pyrolysis incineration, pyrolytic incineration, pyrolytic incinerator equipment, pyrolytic incinerator manufacturer, pyrolytic incinerator supplier, shipping equipment, we always try to make clear about these document to different. And before shipping, we know that wooden carton ship to his country need fumigation certification. At that time, we have to postpone delivery and ask agent to make this document, then we have to pay $300USD and waste 3 days. 
The related is the shipping mark on equipment or carton.

Inauguration d'une usine de gestion des déchets animaux à Marsa

La nouvelle usine contribuerait à réduire les pertes d’énergie dans le processus d’incinération ainsi qu’à réduire les émissions nocives

Wasteserv a inauguré plus tôt dans la journée une gestion des déchets animaux de 12 millions d’euros à Marsa.

S’exprimant lors de l’inauguration de la nouvelle usine d’autoclave Wateserv financée par l’UE pour le traitement des déchets animaux, le PDG de Wasteserv, Tonio Montebello, a déclaré que le projet faisait partie de sa volonté d’améliorer l’infrastructure de traitement des déchets du pays.

Montebello a également expliqué que l’usine se traduirait par des économies substantielles réalisées dans l’usine d’incinération, qui traite quelque 6 000 tonnes de déchets par an.

Le directeur des projets, Jean Luke Zarb, a déclaré que le problème avec le système actuel était que beaucoup d’énergie était gaspillée pour incinérer de l’eau ou des graisses sur les carcasses.

«Cette usine fonctionnera essentiellement comme un autocuiseur industriel dans la mesure où elle assèchera les carcasses au préalable», a-t-il déclaré, ajoutant que cela entraînerait en fin de compte moins d’énergie requise par l’incinérateur.

Il a ajouté que les graisses seraient également utilisées comme carburant pour l’usine elle-même, réduisant ainsi sa consommation de carburant.

Soulignant que l’usine serait également utilisée pour traiter les matériaux en provenance de Gozo, Montebello a déclaré que la nouvelle usine éliminerait également les problèmes qui se posaient normalement lorsque l’incinérateur était en maintenance, garantissant une transition et un fonctionnement sans heurts.

Le ministre de l’Environnement, Leo Brincat, a déclaré que la baisse de la consommation de carburant conduirait également à terme à des émissions de gaz à effet de serre moins nocives.

“Une autre nouveauté que l’usine introduira, est dans les aliments périmés contenant des sous-produits animaux, qui devraient normalement être incinérés”, a-t-il dit en utilisant une pizza avec de la viande comme exemple.

«L’usine nous permettra de traiter ces aliments et de les transmettre ensuite à d’autres usines de traitement pour les transformer en biocarburants», a-t-il ajouté.

Brincat a déclaré que le projet augmenterait également l’exploitation globale de Wasteserv et que la société attendait également avec impatience l’inauguration du MBT Malta North dans les mois à venir.

Le secrétaire parlementaire des fonds de l’UE, Ian Borg, a ajouté que le projet, financé à 85% par l’UE, avait également été achevé en un temps record – environ un an.

«Le gouvernement évalue également actuellement des projets pour le dernier paquet de fonds de 200 millions d’euros au titre du Fonds européen de développement régional», a-t-il déclaré.

De: http://www.maltatoday.com.mt/news/national/61095/animal_waste_management_plant_inaugured_in_marsa#.VqX95lK-LmK

Small Scale Incinerator (TS100 PLC)

Basic Info.

Model NO.:TS100 PLC
Pullution Sources:Solid Waste Processing
Processing Methods:Combustion
Export Markets:Global

Additional Info.

Trademark:CLOVER
Packing:Full Container
Standard:100kg per hour
Origin:China Nanjing
Production Capacity:1000 Sets Per Year

Product Description

Nanjing Clover Medical Technology Co., Ltd..

Presentlywe provide different collection for local client requirements and design upgraded incinerator with our leading technology. The upgraded design feature of our range of incinerators make them among the most cost effective in the world. 

Feed Capacity 200 kg
Control Mode PLC
Combustion Chamber 1200L
Internal Dimensions 120x100x100cm
Secondary Chamber 600L
Smoke Filter Chamber Yes
Feed Mode Manual
Voltage 220V
Power 0.7Kw
Oil Consumption (kg/hour) 14–28
Gas Consumption (m3/hour) 10–32.2
Temperature Monitor Yes
Temperature Protection Yes
Oil Tank 200L
Feed Door 80x60cm
Chimney 10Meter
Chimney Type Stainless Steel
1st. Chamber Temperature 800–1000 degree
2nd. Chamber Temperature 1000-1200 degree
Residency Time 2.0 Sec.
Gross Weight 6000kg
External Dimensions 260x150x180cm

Key Features:  * All versions with Dual combustion chamber.  * High temperature, long life of incinerator.  * Free or minimum setup on site.  * High burn rate, from 10kgs to 600kgs per hour, up to 10ton daily.  * PLC Control Plane for Intelligent operation.  * One year warranty on incinerator and parts in stock.

Установка для сжигания отходов в клинике

Базовая информация.

Номер модели: установки для сжигания животных в США на продажу
Источники очистки: переработка твердых отходов
Методы обработки: сжигание
Экспортные рынки: глобальный

описание продукта

Компания Nanjing Clover Medical Technology Co., Ltd. является ведущим производителем мусоросжигательных установок в Китае. Мы – местный производитель и один из крупнейших экспортеров Китая. Техническое оборудование пиролитических инсинераторов – это основная обработка отходов во всем мире, включая медицинские отходы, сжигание животных, кремацию домашних животных и другие твердые отходы. Емкость от 10кг / час. До 500 кг / час, до 6 тонн в день. Установка для сжигания отходов Medica, медицинская горелка, медицинские горелки, установка для сжигания медицинских отходов, медицинское оборудование для кремации домашних животных, сжигание медицинского оборудования. В настоящее время мы поставляем различные серии в соответствии с требованиями местных клиентов и проектируем обновленную установку для сжигания отходов с использованием наших передовых технологий. Обновленные конструктивные особенности нашего ассортимента мусоросжигательных печей делают их одними из самых экономичных в мире.

Скорость горения крематория модельного животного от 20-400 кг в час. Сверхмощная камера сгорания и костюм для кремации крупных животных.

Вторичная камера и камера смешанного сгорания. Время пребывания 2,0 сек. В камере дожигания. Практически без дыма и запаха.

Камера дымового фильтра с фильтрующим кирпичом, практически без дыма и запаха после горения.

Оригинальная масляная или газовая горелка Италия, надежное качество. Подходит для дизельного топлива, природного газа, сжиженного нефтяного газа.

Руководство пользователя, полная документация по установке и эксплуатации для клиента.

Предметы / Модель A360 A600 A900 A1200
Скорость горения * животное 20 кг / час. 20 кг / час. 30 кг / час. 60 кг / час.
Емкость корма * животное 30 кг 50 кг 80 кг 100 кг
Вес оборудования 2300 кг 3000 кг 4000 кг 4300 кг
Первичная камера (литры) 360 600 900 1200
Вторичная камера (литры) 200 200 300 500
Внешние размеры (см) 145x90x175 175 х 100 х 180 200x160x230 220x180x360
Внутренние размеры (см) 100x60x60 130 х 70 х 65 120x90x85 130x100x90
Масляный бак (литры) 200 200 300 300
Дверной проем (см) 48 х 60 50 х 60 62 х 80 55 х 80
Дымоход (M) 5 5 5 10
Тип дымохода Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь Нержавеющая сталь
Вторичная камера ДА ДА ДА ДА
Камера смешанного сгорания ДА ДА ДА ДА
Камера дымового фильтра ДА ДА ДА ДА
Горючее топливо Нефтяной газ Нефтяной газ Нефтяной газ Нефтяной газ
Время проживания 2.0 сек. 2.0 сек. 2.0 сек. 2.0 сек.
Контроль температуры ДА ДА ДА ДА

Связаться сейчас Тел: + 86-25-8461 0201

pet cremation equipment

 

Method of Waste Charging

Waste shall be fed into the primary chamber manually, that is by hand. Semi-automatic or automatic feeding systems are

not mandatory.

 

Method of Burning

The primary and secondary burners shall be equipped with at least one fuel oil burner each. Waste shall be manually fed

into primary chamber and heated to required ignition temperature of at least 600 degree Celsius. A controlled quantity of

air shall be admitted by combustion air blower to maintain the necessary reaction heat necessary for thermal degradation

of waste. Smoke, ash, volatile gases, etc generated from the primary chamber shall be effectively and economically

ignited from the secondary chamber. Emission through the pile shall be within environmental criteria.

 

Combustion Chambers

The internal lining for combustion chambers shall be made up of pre-determined thickness and high temperature stability

insulation, high power firebricks and castible refractory. The casing of the room shall be constructed from high grade mild steel plate. Lifting devices

like eye bolts and lifting lugs shall be fitted as standard.

The internal lining for combustion chambers shall be made up of pre-determined thickness and high temperature stability

insulation, high strength firebricks and castible refractory. The temperature rating for refractory shall be at least

1,500 degree Celsius. The casing of the chamber shall be constructed from high grade mild steel plate. Lifting devices

such as eye bolts and lifting lugs shall be fitted as standard.