Archive: November 3, 2021

Google快讯 – medical waste

Google
medical waste

实时更新 2021年11月3日
新闻

The City of High Point is holding its next Household Hazardous Waste … household garbage or medical waste, even if you're from High Point.

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯

RSS 以RSS Feed的形式接收此快讯

发送反馈

Medical Incinerator Specification

Capacity Not less than 500Kg/hr.
Operation 24hr-7days/week continuous operation.
Combustion chamber 2 combustion chamber.
Temp. First combustion chamber 800-1000 C.
Secandry combustion chamber 1000-1200 C, with the possibility to be upgraded to 1400 C.
Combustion Efficiency 99.99%
Retention time Of the flow gases not less than 2 Sec in the hot portion.
Excess Oxygen concentration Of primary combustion chamber 3-6% max.

Refractory The chambers should be lined with high thermal insulating refractory bricks with suitable thickness and with highly temp. 
resistance. Not less than 1400 C for the first combustion chamber, and not less than 1600 C for the secandry combustion chamber, and at the 
same time prevent the Temp. of the outside body of the chamber not higher than 70 C.
Doors Should be lined with the same bricks, and the edges lined with special suitable insulating material to prevent any gas escaping, and 
the doors should be kept under negative pressure during the operation.
Air Emission Control System With high destruction and removal efficiency (DRE). Not less than 99.9999 as per KEPA.
Wet System If the system equiped with a CEMS washing the flow gas with water, then it should be manufactured from suitable anti 
corrossion materials, and equiped with pH meter to measure and neutralize the water. It should be able to use the water in closed recycled 
circuit many times before treating/ discharging into the sewage system in compliance with KEPARS.
Chemical dosing It should be equiped with suitable autochemical dosing system to control the pH for the water of the wet scrubber system 
including sensors.
Chimney It should be suitable with the capacity and the technical specifications, with height not less than 12m from ground level. With easy 
opennable sampling point equal about 3 inch, and the optimum sampling locations is at least 8D downstream direction and 2D upstream from any 
flow disturbancies.
Sampling point Should be equiped with a platform located down the sampling point by a distance not less than 1 m, and equiped with suitable 
stairs from ground to the port with comfortable slope.
Ash Removal It should be auto ash removal system.
Fuel It should be dual system, such as diesel and natural gas.
Feeding System Should be auto feeding system into primary chamber.
Control Room Should be equiped with a control panel shows Temp. of the combustion burners, gas monitoring, digital Temp. indecation for the 
primary/secondary chambers, digital Temp. indication for the gases…etc. it should be also Auto operation, burnures on/off auto lamps switch, 
auto start/stop for air emission control system, auto gas continuous monitoring system reading and print out of gas emission parameters…etc.
Cooling System The primary chamber should be provided with auto cooling systemthrough nozzles to permit direct cooling if the Temp. will be 
heigher than 1100 C.
Inter-lock system The incinerator should be equiped with inter-lock system to prevent feeding the waste to the primary chamber if the 
combustion Temp. less than 500 C.
Flue treatment and cleaning To consist a combined system (wet/dry), using water, lime, active carbon and ceramic filters.
Quenching system/Heat exchanger Should be made and manufactured from anti corrosion and acid attack materials such as stainless steel 316 or 
equivalent.
Noise Level Not more than 85 dBA during normal operation.
Inaddition The desigh should insure that responsive fail-safe control systems are used.
The incinerator should be installed inside closed suitable building with good aeration and ventilation system. The building has 
facilities for off-loading of wastes from transport vehicles. Auto cleaning system for trucks and waste containers, and cool storage 
area…etc.
The quotation should included list of original spare parts for 7 years.
The quotation should include supervising, starting up and training of the operators and ministry of health engineers inside/outside 
Kuwait.
Detailed drawings, catalogs should be included.

Google快讯 – incinerator

Google
incinerator

实时更新 2021年11月3日
新闻

The meeting was opened by the chairwoman of this commission, Jorida Tabaku, who stressed that the committee will discuss 3 incinerators, that of …

Facebook Twitter 标记为不相关

… a premier countywide recycling program and leading the fight to stop the local development of a controversial trash incinerator in Kirkwood.

Facebook Twitter 标记为不相关

At an early age worked with our family to build an incinerator at a hospital in Tijuana. His latest projects were successfully producing fund …

Facebook Twitter 标记为不相关

LyondellBasell and Covestro built a new bio plant and incinerator on their site, in which the production's waste is treated and transformed into …

Facebook Twitter 标记为不相关

YOU MAY ALSO LIKE · Medical Waste Incinerator in Aba: Rotary Club of Umungasi Aba Aims at Inaugurating a New Environmental Regime in Aba · Sit-at-home: …

Facebook Twitter 标记为不相关

The new waste management facility will also mean less rubbish will be shipped from Orkney to Shetland for burning in an incinerator.

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯

RSS 以RSS Feed的形式接收此快讯

发送反馈

Google快讯 – medical waste

Google
medical waste

实时更新 2021年11月3日
新闻

Improved health services may also lead to an incremental increase in bio-medical waste. Any improper management of wastes including bio-medical …

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯

RSS 以RSS Feed的形式接收此快讯

发送反馈

We are in the process of building a new hospital waste treatment plant and we are evaluating different technologies from around the world.  We are looking to incinerate approx. 1 to 2 tons of biomedical waste per day using LPG for heating.  Please send me all general information and quotes for machines of all ranges that could meet our needs.  Also, please include emissions reports of all of the various machines that could be of interest to us especially with regards to  dioxins and furals as well as lists of recommendations from past clients.  If you have any government entities using your machines please include lists of whom they are as well as any documentation that you contain that can prove their use.  Timing is also very important to us with regards of when the machines can arrive to Peru and be up and running. Therefore, it would be appreciated if you could include time frames and the whole process from purchase to installation and maintenance.  Burning Rate:5–120kg/hour
Minimum Operating Temperature:850o C(primary combustion)
Maximum Operating Temperature:1450 oC(Afterburner chamber)
Secondary Burning Capacity:Compulsory
Density Insulation:20mm High
Refractory Casting:Minimum 65mm
Heavy duty refracting lining to withstand:1500 oC
Average burn out time :maximum:3 hrs
Fuel type:Diesel
Fuel Consumption in L/hr:7.5 to 9
Residence time in secondary chamber:2sec
Residue ash pot 100kg:Max 3.8kg

Google快讯 – enviromental

Google
enviromental

实时更新 2021年11月3日
新闻

¿Cómo Pueden Jugadores Como [Graco, EMist, Guarany, Wagner, Hako, Zhongnong Futong, ZEDO, Qintong Enviromental Technology] Obtener Una Ventaja …

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯

RSS 以RSS Feed的形式接收此快讯

发送反馈

Incenoradores para mascotas

Información básica.

Mercados de exportación: Global

Información adicional.

Marca registrada: trébol
Origen: Nanjing China

Descripción del producto

Nanjing Clover Medical Technology Co., Ltd. es un fabricante líder de incineradores de desechos en China. Somos fabricantes locales y uno de los mayores exportadores de China. El equipo técnico de incineración pirolítica es el principal tratamiento de desechos en todo el mundo, para desechos médicos, incineración de animales, cremación de mascotas y otros wste sólidos. La capacidad de 10kgs / Hr. Hasta 500kgs / Hr., Hasta 6ton por día. Actualmente, suministramos incinerador crematorio para mascotas, cremación para mascotas, precio del equipo de cremación para mascotas, costo del equipo para cremación para mascotas, equipo para cremación para mascotas a la venta, diferentes series para los requisitos de los clientes locales y un incinerador actualizado de diseño con nuestra tecnología líder. La característica de diseño actualizado de nuestra gama de incineradores los convierte en uno de los más rentables del mundo.

Características principales:
* Todos los modelos con doble cámara de combustión.
* Chimenea / chimenea de acero inoxidable, larga vida útil. * según pedido
* Alta temperatura, larga vida útil del incinerador.
* Instalación gratuita o mínima en obra.
* Alta velocidad de combustión, de 10 kg a 500 kg por hora, hasta 6 toneladas por día.
* Plano de control PLC. * según pedido
* Nuevo diseño para el negocio de cremación de animales de compañía.
* Garantía de un año en incinerador y piezas en stock.

Ámbito de aplicación:
1. Hospital y clínica: Residuos Iátricos, Residuos Infecciosos, Vendajes, Biorresiduos, Medicina.
2. Matadero y hospital y granja de mascotas: animal muerto, biorresiduos.
3. Comunidad, puerto y estación marítima: residuos sólidos urbanos, etc.
4. Laboratorios, ubicaciones remotas, operaciones de socorro en casos de desastre, cremación de animales

Tecnología médica Co., Ltd. del trébol de Nanjing
Tel: + 86-25-84610201
Envíe por fax: + 86-25-84610406

Refractory Concrete Burner

2 medical waste incinerators version YD-50, 150 kg feed capacity, 220/380 V, 50 Hz c/w 5 mtr. chimney.

Will be good for comparison. Our most important byproducts are the slaughtered unwanted carcass.

•             Using diesel as fuel

•             Capacity 50kg per hour

•             barrels substance: Refractory Concrete

•             Number of chambers: 2

•             Manual feed

Bio-medical waste management plant requirements:

Disinfecting/sterilizing the contaminated medical wastes, main combustion chamber, post combustion chamber, heat exchanger, ash removal units and flue gas treatment systems, with the following details:

Hourly capacity of the system:           from 250 up to 500 Kgs/ hour

Duration of operation:                        from 14 up to 18 hrs/ day

Fuel type to be used:                         Diesel or alternative

Calorific value of the waste:               3500 up to the maximum limit kcal/ Kg

Minimum operating temperature of main chamber: 1000 degrees celcius

Google快讯 – medical waste

Google
medical waste

实时更新 2021年11月3日
新闻

IMAGE had opposed the board's decision to permit KEIL to collect and process biomedical waste generated in government and private healthcare …

Facebook Twitter 标记为不相关

Vaccine providers must also dispose of unused vaccines like they would any other medical waste, according to the law.

Facebook Twitter 标记为不相关

X NO Compressed Gas Cylinders. X NO Copiers. X NO CRT Monitors. X NO Electronics. X NO Fire/Smoke Detectors. X NO Medical Waste. X NO Medicine.

Facebook Twitter 标记为不相关

Gulf Land Fire Safety Services, Inc. Medicine / Prescription Drugs. Lafayette Parish Sheriff's Office; Local Pharmacies (Call ahead- CVS, iCare …

Facebook Twitter 标记为不相关

… the medical waste disposal provider with the implementation of an ERP … organic revenue growth and Regulated Waste and Compliance Services.

Facebook Twitter 标记为不相关

The medical waste management company posted revenue of $648.9 million in the period, also missing Street forecasts. Four analysts surveyed by …

Facebook Twitter 标记为不相关

… reduce medication waste, and enable the reallocation of high value clinical resources from frustrating manual tasks to direct patient care.

Facebook Twitter 标记为不相关

Through the project, a health care facility in Rarotonga will be … The only medical waste incinerator in the country will struggle to safely …

Facebook Twitter 标记为不相关

The average estimate of five analysts surveyed by Zacks Investment Research was for earnings of 57 cents per share. The medical waste management …

Facebook Twitter 标记为不相关

A quarter ago, it was expected that this medical waste management company would post earnings of $0.68 per share when it actually produced …

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯

RSS 以RSS Feed的形式接收此快讯

发送反馈

Medical Waste Incinerator: Essential Medical Waste Disposal Services Provided By Meda Send

Medical Waste Removal Companies Medical Waste Service Suggestions There are different types of wastes that people need to be conscious about in order to avoid exposure to this waste that may cause health illnesses and diseases. One of the most dangerous types of waste that people need to get rid of is hazardous wastes. These are the type of wastes that completely pose potential or substantial threats to people particularly to public health and to the environment. These wastes are also known as special wastes since they cannot be quickly disposed compared to other types of wastes.

Thus, in order to relieve all the worries of the people regarding this matter Meda Send offers hazardous waste disposal that could help medical facilities. They are providing cost-effective as well as safe services that could easily and effective disposed your hazardous waste. They are very consistent in giving safe as well as environmental-friendly services to the people in order to disposed common existing hazardous waste in medical facilities. They are the best company that would lend your medical facility hazardous waste disposal plan that would be effective towards your aim for a healthy and safe environment for the people.
Pathological Waste Definition

Hazardous wastes are those chemicals and medicines that are toxic and infectious that can effectively affect the health of the people upon exposed. These may also be laboratory medicines which are used by doctors in aid for harsh and severe diseases and illnesses of patients. Disposing these hazardous waste would not be a difficult task since Meda Send would be your help in this matter. They are going to provide medical facilities containers in colored red covered by red plastic where they can put their hazardous wastes. They are also giving medical facilities adequate time in collecting all the hazardous wastes that may be found in their place. This is essential before allowing the pickup truck of the company to get your collected hazardous wastes.

They are very much concern on the health of the people inside and outside of their medical facility hence they wanted to make sure that they would not be exposed and be inflicted with the toxins and other harmful chemicals coming from this hazardous waste. Since Meda Send is always available, medical facilities would always have an assurance of a quick disposal of waste particularly when there are already huge quantity of hazardous waste in their place.
medasend.com Sharps

Hazardous waste disposal could be an easy task for all medical facilities particularly if they are going to seek any of the waste management disposal services of Meda Send. Don’t miss the opportunity to avail any of the services offered by Meda Send for a healthy and safe environment. This would always guarantee that you will have a healthy environment that is free elements that pose health risks.

Most people know that there is a large amount of medical wastes that are being produced by most of the medical facilities like hospitals, clinics and many other health facilities each day. These wastes need to be properly collected, transported, segregated, and disposed to its proper places and condition. Although some medical facilities are considered to be proficient and knowledgeable in disposing their wastes, they still need to seek a company that could guide them and help them on how they are going to dispose their waste properly particularly when instances that they can no longer handle proper medical waste in their place.

That is why Meda Send would be an effective answer to what medical facilities are greatly in need of in terms of their wastes and garbage each day. They are one of the highly recognized companies all over the world that is highly specialized when it comes to healthcare and proper medical waste disposal. They are not just aiming to help people in managing their waste sine they also aim to provide a healthy community free from diseases and illnesses that may be due to improper disposal of waste.
medasend.com Posts

Meda Send is very committed and devoted in giving waste services to all the people. They can effectively handle medical disposal needs of medical facilities with their speed as well as accuracy. They are very effective in providing the people waste management services which aims for a healthy environment not only covered by the people who are inside the medical facility but also with all the people in the community. With the help of medical waste disposal services of the company, people are guided with the proper waste management they need to do. This is not only good for nurses and doctors but for all the people as well.

They are given greater chance to be well-equipped with the proper segregation of waste. This is very important to get rid of risk since these wastes are considered to be harmful to people and to the environment. They are taught on the right place where to put their waste. This is through allowing them to segregate their waste in a red plastic. Medical waste disposal of the company is known to be very effective and efficient since they are providing consistent type of truck pickup grid making the people feel at ease in scheduling medical waste pickups. They are also available 24/7 hence they make sure that waste compliance needs of the people are given high importance that the company is not taking for granted.

So, for medical facilities that are rendering services to large or small group of people, Meda Send could be one of the best companies that could give you safe and healthy environment that could cater the needs of the people towards a healthy and safe community to live.

by: http://ourbdspace.com/blog/34552/medical-waste-incinerator-essential-medical-waste-disposal-services-provide/