Archive: November 5, 2021

Waste Incinerators

MEDICAL WASTE INCINERATOR (50 C 60kg/hr)

Nov 5, 2021 by hiclover 0 Comments
Medical Waste Incinerator, 50 to 60 Kg/hr
Support Health Sector Support Project
Point of Installation (Hospitals) Moi Voi, Makindu, Maragua, Eldama Ravine and Isiolo District Hospitals
1.    General Description
Supply, delivery, installation and commissioning of a medical waste incinerator suitable for disposal of Medical, General and Pathological waste in a safe and clean environment.  The unit shall consist of two chambers and operate on the principal of controlled air and temperature. The unit shall consist a particulate remover (scrubbers) as stipulated in waste management regulations, 2006 (Legal notice NO. 121 of 29th September, 2006).  The Unit shall be fully automatic and controlled by an automatic electronic controlled system except loading system which shall be manual.  The unit shall be capable of incinerating between 50 to 60 kg of solid medical waste per hour.  It shall be constructed from mild or aluminized steel lined with refractory material.
Main unit
Application For incineration, general and pathological
Capacity   50 C 60 kg/h burn rate
Type Two  combustion chambers type; primary  and Secondary, controlled/forced combustion air type with a flue gas emission scrubbing unit
Operating time                Minimum 8 hours daily
Operating temperature     From 850 0C to 1200 0C, Automatic controlled
Residual Ash                    5 to 10%
    3.2     Primary Chamber
Construction Constructed from heavy duty mild or aluminized  steel Or
equal and approved equivalent
Insulation material            Refractory material lining similar or equal to calcium 
Silicate and hot face combination of heavy duty brickwork
Internal Construction        Fixed hearth type complete with gratings, concave bottom
and charging door, lined with refractory material
Charging Door                   Suitable for manual loading of wastes and with smooth 
Dear seal equivalent of Ceramic seals with hinges.
Door Lock                          Automatic, Electric type
Ash removal door    Provided, for removing resultant bottom ash leftovers                              from the Primary chamber
Gratings   Provided
Loading Manual loading of waste
Primary Burner                        Fully automatic, with fuel, temperature and speed controls with ignition system, flame detector, Air fan complete with safety features, flame failure,  Diesel fired fuel injector type and Flange mounted                                                                                                    
Blower Provided. For supplying excess combustion air through the distribution system with speed control system
Temperature Minimum exit 850 0C
Observation port To be provided with protective glass type
Construction   Constructed from heavy duty mild or aluminized steel or equal and approved equivalent
Insulation Refractory material lining
Combustion Temperatures        Above 850 0C, controlled electronically
Gas residue or retention Time       > 2 second at minimum 850 0C
Secondary Burner                    Provided, Diesel fired, fully automatic, with fuel, temperature and speed controls, With ignition system,                                                                  Flame detector, Air fan, Complete with safety features, flame failure Diesel fired fuel injector type.                                                                  Flange mounted
Ejector Provided, Venturi type, for cooling the flue gases
Combustion Air Fan Provided for supplying combustion and creating a negative drift and turbulences
Temperature Maximum  1600 0C
waste

Google快讯 – medical waste

Nov 5, 2021 by hiclover 0 Comments #blogger

Google
medical waste

实时更新 ⋅ 2021年11月5日
新闻

According to inspectors, unsealed medical waste bags were observed, paint peeling and floor and wall damage may have prevented proper cleaning.

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯。

RSS 以RSS Feed的形式接收此快讯

发送反馈

Vietnamese

Vật liệu quang điện tử Huihe

Nov 5, 2021 by hiclover 0 Comments

2019-05-22 Thành tựu và trường hợp526 lượt xem

Tên dự án: Keiwa Clean Shed

Giới thiệu dự án: Thiết kế, sản xuất và lắp đặt nhà kho sạch




Công ty TNHH Huihe, có trụ sở chính tại Osaka, Nhật Bản, là một trong những nhà sản xuất phim khuếch tán quang học chính trên thế giới. Với việc không ngừng mở rộng quy mô của công ty, công ty đã thành lập Công ty TNHH Huihe Optoelectronic Materials (Nanjing) tại Nam Kinh vào năm 2006. Công ty chủ yếu sản xuất bộ khuếch tán quang học, một trong những thành phần của màn hình tinh thể lỏng, với khách hàng ở Đông Trung Quốc , Nam Trung Quốc, Đài Loan và Nhật Bản. Của các nhà sản xuất màn hình LCD lớn.

URL nội dung khác: www.ecolead.cn Tel: 025-57138032

waste

Google快讯 – incinerator

Nov 5, 2021 by hiclover 0 Comments #blogger

Google
incinerator

实时更新 ⋅ 2021年11月5日
新闻

RELATED STORIES: Incinerator that destroys tainted sunflower screenings is out of commission · Weed protocol important in returning cattle.

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯。

RSS 以RSS Feed的形式接收此快讯

发送反馈

waste

Clover Medical Medical West Incinerator

Nov 5, 2021 by hiclover 0 Comments #wasteincinerators

Basic Info.

Model NO.:china animal incinerator manufacturer
Export Markets:Global

Product Description

Technology Respond(FAQ) 

Q: What is kind of waste can use in this equipment? 
A: This equipment for medical waste, pet animal, Municipal waste, live waste. Prohibit any explosive and radiation material, liquid waste and gas waste. 

Q: Incinerator Smoke Standard 
A: China Government Standard: No. GB18484-2001. 

Q: Treatment capacity 
A: Average Capacity calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg per hour), not mean any waste material. The animal/pet combustion rate around 2/3 of average capacity. 

Clover incinerator use time per day up to 24 hours. Between each feed/combustion time, there are about 0.5-1 hours cooling time and time for feeding waste. Actual combustion time per day is around 16 hours. The lifetime of incinerator between 5-10 year according to use. 

Generally, we proposal small laboratory, small clinic use capacity under 20 kgs per hour. When incinerator use in hospital, please calculate the waste output capacity around 2kgs per people per day. If there are 200 sickbed in the hospital, that’s mean you need one incinerator capacity around 400kgs per day, change to capacity per hour is around 30-40 kgs per hour. incinerators 150 kg per hour, incinerators 300 kg per hour, large incinerator, medical incinerator design, medical incinerator Italy, According the operation time per day, waste material, budget, development, etc, you can use capacity from 30-50 kgs per hour incinerator. 
*How to calculate Animal Cremation Burn Rate: 2/3 of the medical waste. 

Q: Assembly and Testing 
A: We supply all documents and incinerators easy to installation and operation. Customer can send people come to our factory to learn installation and operation. Generally, We do not send engineer to local site if not request. The dispatch cost is extra according to order. 

Q: Combustion Temperature 
A: The first combustion chamber: 800-1000 centi degree. 
The second combustion chamber: 1000-1200 centi degree. 

Q: Incinerator Control Mode 
A: Default Control mode is common control case. PLC mode according to model and order. 

Q: Operation and maintenance costs 
A: Operation cost according to fuel consumption rate and power/staff, etc. 

Annual around $500-$1000USD per year maintenance according model, use situation. 

One person can service 02 unit incinerators. The staff should have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to operation user guider, and know risk of medical waste to protect worker self with necessary protection element. 

Q: The Residency time in secondary combustion chamber 
A: 02 sec.

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm
waste

Google快讯 – incinerator

Nov 5, 2021 by hiclover 0 Comments #blogger

Google
incinerator

实时更新 ⋅ 2021年11月5日
新闻

Petugas membakar bibit jeruk tersebut di incinerator, yang disaksikan jasa ekspedisi. Dikatakan, tindakan pemusnahan dilakukan karena pemilik tidak …

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯。

RSS 以RSS Feed的形式接收此快讯

发送反馈

waste

Google快讯 – waste incinerator

Nov 5, 2021 by hiclover 0 Comments #blogger

Google
waste incinerator

每天更新 ⋅ 2021年11月5日
新闻

The fire occurred on the tipping room floor of the Penobscot Energy Recovery Co. incinerator at around 8 or 9 a.m., according to plant manager …

Facebook Twitter 标记为不相关

But while incineration is widely regarded as a better solution for the environment than landfills, waste-to-energy plants still produce emissions that …

Facebook Twitter 标记为不相关

… reducing waste-related emissions, such as improved separate collection of waste, recycling, and composting, 39 also include waste incineration …

Facebook Twitter 标记为不相关

The United Arab Emirates, with its piles of garbage in the desert, has discovered a new way to get rid of it: an incinerator that turns it into …

Facebook Twitter 标记为不相关

Therefore, human crematories are not solid waste combustion units, and are not a subcategory of Other Solid Waste Incineration (OSWI) for …

Facebook Twitter 标记为不相关

… green energy sources already in use at the hospital include harnessing heat from a waste incinerator and a combined heat and power system.

Facebook Twitter 标记为不相关

Cllr Ward Jones, Westbury's deputy mayor, asked if any of the 18 town and parish councils that had also objected to the waste incinerator had …

Facebook Twitter 标记为不相关

The list also includes 3 mayors, in which waste processing plants or incinerators have been built. The Mayor of Tirana, Erion Veliaj, the Mayor of …

Facebook Twitter 标记为不相关

Essex Fire & Rescue service said the fire started from an incinerator being used to burn garden waste.

Facebook Twitter 标记为不相关

Medical Waste Incinerator in Aba: Rotary Club of Umungasi Aba Aims at Inaugurating a New Environmental Regime in Aba.

Facebook Twitter 标记为不相关

查看更多结果 | 修改此快讯
您收到此电子邮件是因为您订阅了Google快讯。

RSS 以RSS Feed的形式接收此快讯

发送反馈

hongkong

快速捲簾門風淋室的運輸存儲注意事項

Nov 5, 2021 by hiclover 0 Comments

2019年05月22日 行業動態 210 views

快速捲簾門風淋室是一種應用非常普遍的凈化設備，可以有效高效的減少灰塵和污染源的進入。所以很多有需求的企業都會用到風淋室，尤其是在食品加工行業中，風淋室的應用最為廣泛，風淋室的使用中需要按規定操作，後期需要按規範維護和保養，那麼風淋室的前期運輸和儲存上有哪些方面需要注意呢？

1、在運輸的過程中磕磕碰碰的現象一定要減少，不僅是對於外觀的注意，也是對於設備的內部的保護，快速捲簾門風淋室生產之後得裝車運輸要注意車輛的衛生，以免有污染物造成箱體的污染。

2、需要將有稜角的地方包裹住，防止稜角的磨損，之後可以用保鮮膜等氣密性能良好的包裝材料進行裹包，這樣可以防止濕氣及雨水的進入，達到防潮防濕的作用。

3、包裝工具的選擇最好為木質，可以防止撞擊和保證產品的乾燥度。

4、運輸中不能倒置及磕碰，在裝車和卸車的過程中保證輕拿輕放、卸車之後要堅持設備的完好度，防止零件丟失。

5、對於生產需求廠家的存放庫房選擇要參照濕度和通風兩個條件，保障設備的存儲條件符合設備的要求，保障風淋室的最佳使用性能。

6、快速捲簾門風淋室的存儲溫度禁止超過50攝氏度，濕度不超過80%，存放的位置禁止有明火的使用。生產企業及需求企業在運輸和存儲上一定要遵照以上的要求進行，保證設備的良好性能。

以上就是快速捲簾門風淋室的運輸和存儲的注意事項，各個企業要嚴格的遵守，它具有很高的使用性能及密封性能，這是很多其他的除塵過濾設備不能達到的條件。操作簡單，運行噪聲小，密封性能好，過濾除塵效果佳，都是它的優點。所以對於企業來說保證設備的運輸和存儲才能保證設備最基本的性能不被損壞。

更多內容 網址: www.ecolead.cn 電話: 025-57138032