Archive: May 2, 2021

Average 10kgs per hour incinerator for small hospital

This equipment quality structural for kinds of site, like hospital, environmental department, 

animal cremation agencies, etc. 

HICLOVER Incinerator supply updated models with dual combustion chamber, 

mix-combustion chamber and smoke filter 

chamber with refractory lines, and the combustion chamber temperature up to 1200 deg C.

Equipment Technical Specifications
Model	YD-10C
Picture
Feed Capacity	Average 40 kgs per feed
Burning Rate	Average 10 kgs per hour
Burning Time per Feed	3.0 -5.0hours
Voltage	220V
Power	0.50Kw
Fuel	Natural Gas or Diesel oil
Burner	Italy Burner
Feed Mode	Manual
Fuel consumption (Oil)	4.4-9.4 Kgs/Hour
Fuel consumption (Gas)	5.3-11.2m3/Hour
External Dimensions	170 x 140 x 160cm (mainbody)
Internal Dimensions	55 x 55 x 65cm(Primary Chamber)
Waste combustion chamber	200Liters
Post Combustion Chamber	140Liters
Oil Tank Capacity	50 Liters
Door Opening	38 x 48cm
Chimney	5.0M
Gross Weight	1800kgs
Chamber Material	Refractory Concrete
Max. Heat Value	94,000Kcal/Hr.
Operation Technical Specifications
Solid Chamber temperature	8000C -10000C
Gas Chamber temperature	10000C -12000C
Chamber Anti-Rate	13500C
Residency time	2.0 Sec.
Burning efficiency	＞98%
Waste Lower Calorific Power	3000Kcal

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

waste incinerator manufacturer in china

1. Burning rate: 250 Kg/hr.
2. It should be able to Operate not Less than 10 hours/day
3. This incinerator must be able to destruct all combustible wastes produced by hospitals, private clinics, laboratories, institutes, etc…
4. Design Specification: Types A, B, C, D, and E of medical waste
5. “PYROLYTIC” combustion, by controlling the gasification of waste.
6. The incinerator must avoid the release of black smoke and fine dust, (Smokeless) during the loadings.
7. It should be able to reduce the volume of wastes by 98%.
8. It should be able to hold emission in the second burn with gas residence of not less than 2 seconds.

The incineration should be completely free from visible smoke as well as offensive odours.

9. The lower calorific power (L.C.P) of this waste will be 3,500 kcal/kg

• The Temperatures of combustion:Minimum will be 850^oC and max 1400^oC
• Post combustion: >1100^o

10. The Internal diameter of the Chimney: Ø 400mm² and its height: 8 Meter
11. The Volume of the combustion chamber: Not Less Than 2.3 M³
12. Burner operation should be Automatic On/Off
13. Fuel : diesel, LPG, Natural Gas, Bio fuel
14. The supplier must provide  necessary information for the best of  the installation

This incinerator with “PYROLYTIC” combustion must have:

15. A combustion chamber of waste:

* Perfectly tight door for the manual loading of waste.The loading should be Manual, Batch Load,

* A burner of lighting which the use is limited to the ignition of waste.

* Top Loading loading with door seals gone up on hinges, wheel of screw plug, flexible joint, and stuffing insulating out of refractory.

* The insulation of the combustion chamber should be composed of refractory bricks, having a high content of aluminum and insulates bricks in order to assure a minimum temperature on   the outside sheet metal.

* Composition of the refractory;

• Refractory concrete :
  • . Thickness : ≥100 mm
  • . Nature: 42% of Al203
• Insulate in fibrous panels :
  • . Thickness: ≥75 mm
• Nature: Calcium silicate.

* Burner of lighting of waste, with fuel, standard mono-bloc casting guiding plunging flame, lighting and safety of electronic ignition, permanent ventilation, electromagnetic sluice gate of regulation and isolating valve.

* Plate of combustion in Carborundum, avoiding the fixing of glass and slags.

16. Load Method: Top Loading

17. A chamber of post combustion of gases

* A burner of combustion of gases,

* A device of injection of air allowing a total recombustion of gases,

* A device of air inlet of cooling of waste gases,

* A sheath of evacuation of the gases burnt.

* Carcass in strong sheet steel with support of connection.

* Composition of the refractory;

• Refractory concrete :
  • Thickness : ≥180 mm
  • Nature: 65% of Al203
• Insulate in fibrous panel :

FFP2 Breathing mask machine

平面口罩机参数：

Semi-Automatic Mask Machine

l Power supply: 3.3KW mono phase

l Mask Size: 175mm*80-100mm (two or three layers)

l Nonwoven (GMS): 10-50g

l Capacity: 120 to 150pcs/min

l Dimension(L*W*H):3800mm*500mm*1400mm

l Net Weight: about 1000kg

 

焊接机参数：

Welding Machine

l Capacity: 5 to 10pcs/min

l Power supply: 8.5KW mono phase

l Compressed Air connection: 0.5 to 0.7Mpa

l Dimension(L*W*H): 900mm*650mm*1380mm

l Net weight: approx. 50kg

 

KN95口罩机参数：

N95 Mask Machine

l Capacity: 130 to 160pcs/min

l Dimension(L*W*H): 1037*855*1780

l Power Supply 15.3kw mono phase

l Net Weight: approx.: 1500kg

Zhangjiagang Tengxiang Machinery Co., Ltd.

Mobile: 0086-13962221749(whatsapp)

Wechat: chncheumg

Email: [email protected] 

Face Mask Machine for Coronavirus Disease COVID-19

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-04-06

incinerator manufacturer in china

1. Is the residence time more than 2 seconds?
2. Is the primary and secondary air preheated?
3. Could it be provided as a continuous system?
4. Is there a monitoring system for operational parameter? (temperature)
5. Is there a data logging system?
6. Does it provide for control interventions to adjust waste feed, grate speed, and temperature, volume and distribution

of primary and secondary air?
7. Does it include auxiliary burners?
8. Does it include system that automatically stops waste feeding when combustion parameters are not appropriate?
9. Is it possible to have an automatic bottom ash unloading system?
1. Is the primary and secondary air preheated?
2. Could it be provided as a continuous system?
3. Is there a data logging system?
4. Does it provide for control interventions to adjust waste feed, grate speed, and temperature, volume and distribution

of primary and secondary air?
5. Does it include auxiliary burners?
6. Does it include system that automatically stops waste feeding when combustion parameters are not appropriate?
7. Is it possible to have an automatic bottom ash unloading system?
Incinerator
Rated Capacity: 100/KG/Hr
Type of Design: Double Chambered
Mode of Heating: Heating Elements

N95 Face Mask Machine Production Line on Sale Now! $250,000USD per set