Archive: April 19, 2021

INCINERATOR DIESEL DRIVEN

INCINERATOR, DIESEL DRIVEN
waste kind: HEALTHCARE WASTE
Waste calorific worth: 4000KCAL/KG
Wetness Content: 10-25%.
Nominal Capability: 50Kg/Hour set load.
Second Chamber: 2 Secs @ 850degrees C.
The main combustion chamber must ensure minimal leave temperature level is not less than 850 levels C.

INSULATION.
Calcium Silicate.
Restricting Continual service limit 1000 degrees C.
Density 25mm

THROUGHPUT.
50kg/hour at a small calorific worth of 4,000 kcal/kg and also an ordinary mass thickness of 120kg/MCubed for basic waste and 160kg/MCubed for health care waste.

BURNER For incineration of Laboratory wastes products

Incinerators to be appropriate for the expert disposal of scientific & & medical waste/ rubbish with a greater lots capacity in the series of about
1000-1500 Kg. The sturdy, self-contained incinerators will offer an efficient and extremely efficient, safe disposal as well as to be made according to relevant worldwide instructions, e.g. CE, EU, etc
. Type of Gas: Diesel or Petrol or Natural Gas. Temperature controlled,
effective burner for optimum gas economy. burner in the best innovation and an approximate capacity of 2000 bunch/ year. Perhaps an incineration ability of 200 kg/ human resources and also a calorific worth of 7500 kcal/ kg. Industrial and also domestical waste.INCINERATOR For incineration of Lab wastes materials

Functions
i.Smoke and odor free
ii.High Temperature, refractory cellular lining with excellent warmth retention
iii.Quick warm up time
iv.Must have a second chamber
v.Constant run follower
vi.Temperature tracking
vii.Thermostat Control

Technical Specifications
i.Capacity: approx. 0.20 m3
ii.Fuel intake: 5 litres/ hour Diesel Oil
iii.Min Operating Temp: 900 oC
iv.Max Operating Temp: 1350 oC
v.Residence Time: 2 sec
vi.Burning rate: 35kg/hr minimum

Accessories
Typical accessories needed

Consumables and also Spares
Provided with spares as well as consumables to accomplish a minimum of 1000 examinations

CLINICAL BIOLOGICAL WASTE BURNER

It should be a 3 chambered burner
The tons capacity of 250 kg
The real estate for the incinerator need to be able to stand up to the temperatures and also various other functional needs.
The chimney ought to have a strong refractory cellular lining of special type of cement to withstand temperature levels greater than 1200oc.
It must have a solid base for the device to keep it stable, firm as well as safe and secure throughout its operational lifespan.
The primary (burning) and also the second (scorching) chambers to be fitted with burners for effective burning.
In the 3rd chamber, scrubbers as well as precipitators will certainly require to be set up as pollution control equipment prior to emission of gases into the environment.
A system for constant emission Surveillance as well as Ecological Tracking.
A system with which to deal with the waste water prior to discharge into the sewage system.
Temperature control and also surveillance gadgets (probe thermostat) need to be availed to make sure that the ideal temperature levels are obtained in the chambers throughout procedure.
Electric motor (followers) adequate to cause adequate air right into the combustion chambers and also guide the gases in the direction of the flue 9 chimney).
High power electrical energy and emergency generator link for automated ignition objectives.
The chimney ought to be tall sufficient and be at the very least one meter over the highest building around.
The fuel storage tank (industrial diesel) to be built beside but out side the incinerator housing for security functions as well as to avoid fire hazards. Capability of 250.
Various other Requirements
Training of all the workers involved in healthcare waste (HCW) administration.
The Automatic Feeding system of the Burner
Automatic waste filling system with conveyor belts. These will lead the waste into the initial primary chamber.
An Automatic base ashes discharge system.

INCINERATOR DIESEL FIRED

Burner 20 Kg
Burner electrically operated
consisting of:
A cage for receipt of biomedical waste;
A burning chamber with fireplace with a filter to maintain ashes;
A cover;
An air supply;
A wind turbine allowing supply air.
Burning temperature: 1800 ° C.
Includes all devices. ▪ The incinerator should be a modern-day waste disposal system, made
to bum medical waste in a tidy as well as environmentally effective
fashion. It should use a temperature based reasoning control system
to supply optimal control of the operating problems and also
incorporate a high capacity thermal oxidizing additional chamber.
It must be made to keep the exhaust gases, for a minimum of 2
seconds to make sure the unit’s reliable destruction of the combustion
products.
▪ All the burners to be supplied and set up meet the
Waste Monitoring Guideline 2006, lawful notice No. 121 of
29th September 2006 as well as particularly third timetable law
( 26, 47) relating classification, criteria, standards, as well as
procedure for setting up as well as running incinerators.
▪ The ability of the incinerator called for should be to the
specs with a capability to melt 100kgs/Hr.
▪ The incinerator shall be operated on a three-phase power supply
( keys).
▪ For the technological examination, not just the treatment plant
the entire system will certainly be taken into consideration. It will be the responsibility
of the Bidder to provide a full system, including all ultimately
furthermore necessary additional systems and extra
tools.
▪ The system supplied will be developed to run usually under
the conditions of the buyer’s nation. The conditions include
Power Supply, Climate, Temperature Level, Moisture, etc.
▪ The Prospective buyer has to provide a warranty for one year.
▪ All message, specification etc. on all control operating user interfaces as
well as on information displays as well as on print-outs will remain in
English language.
▪ The Prospective buyer is in charge of all authorizations and also approvals for
importation. The Prospective buyer shall offer all the essential
paperwork in order to help with the lawful needs for the
installment and also putting into use the equipment.

▪ Duration of Execution is 90 days from contract signature for
delivery to site as well as completion of all verification operations
required for the issuance of provisional approval.
▪ Agents of the Getting Authority and also the
Recipient, together with the Prospective buyer’s rep, shall
carry out the controls, screening and also first authorization for provisional
and also final approval. The provisional and last approval shall
take place at the last destination.
▪ Customer service: The Bidder is called for to guarantee that a.
maintenance, service and also fixing centre, which is accredited by.
the Producer, and which has the ability to rapidly provide genuine.
extra components and consumables recommended by the Supplier.
is offered throughout the one year service warranty period. In.
fulfillment of this need with their offer, prospective buyers must.
send a statement authorized by the producer or representative.
of the manufacturer:.
ͦ Supplying the name as well as address of its licensed.
maintenance, solution as well as repair centre,.
ͦ Verifying that this accredited maintenance, service and also.
repair work centre is able to rapidly supply authentic spare parts as well as.
the consumables suggested by the Producer; and.
▪ The Bidder will be accountable to provide and also install all.
tools supplied to the hospitals in the.
Republic of Kenya. The Bidder will supply a time routine over.
the total building and constructing period. The delivery.
and also setup time have to be agreed between bidders, target.
Medical facility and also the Getting Authority. The therapy plant must.
arrive pre-assembled. The Prospective buyer shall guarantee that all parts of.
the plant moved by sea shall not be delivered as “deck.
cargo”.
▪ It is anticipated that the Prospective buyer cooperates very closely with the.
service provider for the brand-new waste managing structure/ real estate and also will.
make available all needed technological information, drawing, and so on to.
the specialist.
▪ The Prospective buyer shall supply and also install the incinerator with the.
following connected specs

For the Supply, setup & & appointing of a Clinical Waste Burner as in-depth listed below:.
i. Waste type Health care waste.
ii. Waste thickness 125 to 350Kg/M3.
iii. Waste Calorific Value 4000 KCAL/Kg.
iv. Moisture web content 10-25%.
v. Estimated ash residue 5-10%.
vi. Small ability 100Kg/hour set tons.
vii. Second chamber 2 seconds @ 1100 ° C. viii. Environmental Administration Coordination Act, 1999 and also specifically, Waste monitoring guidelines, 2006.
2 Tools.
2.1 Key Combustion Chamber.
▪ The key combustion chamber is the major structure of the.
burner, made from light steel plate and stiffened with.
rolled steel areas. It is brought from the floor degree on a.
substantial steel assistance frame. Internally the covering is lined with.
calcium silicate insulation and also a hot face combination of very.
responsibility brickwork or high toughness castable.
▪ The main burning chamber need to guarantee minimum departure.
temperature level is not less than 850 ° C
. One Manual Tons Burner comprising:.
▪ Manual Loading door (heavy duty steel door with ideal.
refractory lining).
▪ Horizontal strong hearth, refractory lined key combustion.
chamber. Approximate measurements 800 mm diameters x 2100mm.
long.
▪ Complete sized bulk load/ash removal door.
▪ 1 off diesel-fired ignition burner– temperature controlled.
▪ 1 off burning air supply follower and also circulation system, automated.
control.
▪ High capacity second combustion chamber with residence time.
not less than 2 secs @ >> 1100 ° C. ▪ 1 off diesel-fired afterburner– temperature level managed.
▪ Control panel– automated operation.
▪ Temperature level indicator main and also secondary chambers 0-.
1200 ° C. Both chambers have to be protected with refractory.
material (very obligation 100mm thick firebrick with 25mm thick.
calcium silicate insulation).
Keep in mind: The secondary burning chamber must make sure that the gas temperature as determined versus the within wall surface in the second chamber & & not in the fire area, is not less than 1100 ° C. 2.2 Throughput.
100kg/hour at a small calorific value of 4,000 kcal/kg and an ordinary bulk thickness of I20kg/ M3 for basic waste as well as l60kg/ M3 for health care waste.
2.3 Ash.
The waste will be minimized by 90 ~ 95% to leave 10 -5% ash.
2.4 Quality/Environmental Requirements.
▪ Setting Management and also Sychronisation Act, 1999.
▪ BS3316.
2.5 Running Period.
▪ Anticipated daily operating period 8 hours.
▪ Maximum operating duration 12 hrs.
2.6 Chamber.
▪ Must be refractory lined to the following criterion; Hearth as well as.
reduced section of chamber walls.
2.7 Warm face material.
▪ Super duty firebrick.
▪ Restricting continuous solution restriction 1500 ° C. ▪ Thickness 100mm.
▪ Thermal conductivity 1.3 W/mk.
2.8 Insulation.
▪ Calcium silicate.
▪ Limiting continuous solution restriction 1000 ° C.
▪ Density 25mm.
▪ Thermal conductivity 0.095 W/mk.
2.9 Smokeshaft/ Heap.
▪ Ought to be manufactured from refractory lined mild steel or high.
top quality air-cooled stainless steel. The chimney/stack must have a.
minimum height of 10 meters above ground level.
▪ Refractory lined flanged chimney should be over the height of.
any type of existing roof adjacent to the incinerator.
▪ Give lifting equipment to hoist, erect and also place smokeshaft, as well as.
offer supports slings as necessary. Enable cutting of tree.
branches to assist in the workout.
▪ The smokeshaft will be painted with accepted warmth immune.
paint after setup.
2.10 Ignition Burners.
Fully packaged oil kind, total with electrical ignition and also flame failure controls, wired with constant running fan and also total with all shutoffs, fan and also electric motor.
· Optimum rating: a minimum of 450kW/hour.
· Heater: scheduled on/off operation.
· Maximum usage: a minimum of 6 litres/hour.
· Ordinary consumption: at least 3 litres/hour.
2.11 Afterburner.
Fully packaged oil kind, total with electric ignition as well as flame failure regulates wired with constant running follower and complete with all valves, fan and also electric motor.
Maximum rating: at least 450kW/hour.
Burner: scheduled on/off operation.
Optimum usage: at least 9 litres/hour.
Average intake: at the very least 4.5 litres/hour.
2.12 Flue gas treatment.
▪ Needs to have particulate cleaner (scrubbers). A mechanical.
particle collector should be integrated after second.
burning chamber for elimination of particle pollutants.
entrained in the flue gas stream.
2.13 Diesel Storage tank.
▪ To offer diesel solutions tank (Ability 400 litres).
consisting of level indicator.
▪ The container should be connected to the incinerator at higher level.
to make it possible for free-flow of diesel from the storage tank to the incinerator.
The linking pipe needs to be a black pipe of accepted gauge.
as well as diameter. Consist of various other accompanying devices and.
fittings.
▪ Connect heaters to fuel supply.
2.14 Electrical Supply.
▪ 3 stage 415 V a.c., 50/60 Hz.
3 Documents:.
Procedure manual 2 sets.
Service/maintenance guidebook 2 collections.
4 Certification.
▪ National Atmosphere Monitoring Authority (NEMA).
accreditation.
5 Ability to service tools.
▪ The agent/supplier shall have sufficient facilities, spare components,.
consumables and also certified and also experienced technical personnel.
Setup works.
▪ Provide raising gears as forklift, gantry, rollers, and lifting.
jacks and also setting burner.
6 Appointing as well as Training.
▪ The Representative will check all set operating specifications

▪ The representative shall perform a two days operation & & maintenance
. training to the Biomedical engineering employees as well as burner.
operators after setup & & commissioning of the devices.
7 Commissioning Maintenance Contract.
▪ Prior to the expiration of the service warranty/ signing off, the supplier shall.
supply an one-year substitute solution components (e.g. oil filters, air.
filters), the Quarterly regular upkeep cost per quarter.
for 3 (3) quarters.

Upkeep control proposition.
▪ The maintenance agreement price includes work, transportation and also.
accommodation for the attending service technicians.

hospital incinerator supplier

Burner to have dual burning chamber and also control quantity of dioxin as well as other gasses released without being dangerous.

Estimated measurements, to manufacturers typical, but to be compact as feasible. capability: roughly 60kg each day, voltage: 220V and also diesel fired.

CSH Health Center, (Calabar, Nigeria)

Mmedical waste burner capable of getting rid of approximately 0.5 cubic meter of transmittable or pathological waste.

Incinerator to have dual burning chamber as well as control quantity of dioxin and other gasses discharged without being harmful.

Approximated dimensions, to suppliers standard, however to be compact as feasible. ability: about 120kg daily, voltage: 220V and diesel fired.INCINERATOR (WASTE INCINERATOR).
Developed to shed disposables that can as well as need to be destroyed on-site. Theses wastes consist of contagious and also polluted “red bag.” Surgical dressings, plastic examination devices and also other wastes.
Quick, complete, reliable waste disposal.
Double chamber burning, Chambers shielded as well as lined with high temperature refractory. Programmable electronic temperature level controls, temperature signs and also charge recorder. Regulating control for fuel and air reduces gas consumption.
Minimum installation as well as launch time.
Aluminized steel coat lined with refractory and also firebrick. Screens recorders as well as other accessory tools ought to be offered.
Billing system:.
– Upright fee door on primary chamber.
– Pneumatic or hydraulic ram billing system.
– Vehicle closed down of the door after charging.
– Primary and second chamber temperature presented and also taped (optional).
Charging price:.
– Approximately 100kgs per hr of waste or red bag waste rated at 2200 BTU’s per kg.
Fuel:- Gas.
Capability (Cubic Mtr): 1.65 M3 or even more.
Ave Capacity: 100kg per hour.
Additional Chamber Capability (CubicMtr):3.88 or even more.
Size (mm): 1880 or much better.
Width (mm): 1280 or better.
Height Incl. Flue (mm): 7700 or better.
Ash Door Opening (mm): 475 × 900 or much better.
Min. Running temperature: 90 level centigrade.
Max, Operating Temperature: 1350 level centigrade.
Residency time in Second Chamber: 2 sec.
Temperature Tracking: Both for key and also additional chambers.
Packing SystemManual/semi-automatic.
Waste damage performance:> > 90% by weight.
Filter: Ceramic or various other comparable filters in order to lower the induction of dangerous air contaminants, particulates, carbon monoxide, dioxin/furane right into the atmosphere.
De ashing system: Manual/semi-automatic.
The System needs to be quoted total with:-.
– Pipes.
– Electric panels.
– Civil functions.
– Waste collection Trolleys

Complete/ Paint:-.
Premium quality warm resistant, 2 layers state-of-the-art epoxy Paint layer.
Set Up Power (Electric Voltage): 440V/ 50 Hz.
Waste Management Tools must have;.
Mobile packing trolley: 06 No’s– For transportation of health center waste from wards to burner website/ area, Opening from the top.
WASTE BINS MOBILE: 06 No’s- Constructed from Plastic, in blue shade with a cover flap.
Plastic Bags: 2000 no’s each in Red and also Yellow shade.
Heavy Duty Hand Protection Pairs: For Waste managing staff-06 Pairs.
Long Shoes Pairs: For waste handling– 06 Pairs.

burner providers

incinerator suppliers.7) Burn price: 15 – – 20 Kg/h
8) Capacity: not much less than 130 L.
9) Concentrations of many contaminants in pile gases listed below detection limitations.
10) Diesel fuel.
11) Electronic system control.
12) Easy to run and very little training.
13) Any kind of device or devoted device required to the proper functioning and also use of the equipment included.Incinerator medical waste diesel, construction in painted steel aluminum resistant to heats, tool control

sign flame, reload sign, temperature control gadget, shedding capacity of 250kg/ 10 hrs in 2 stages

(key camera as well as additional electronic camera). One furnace to be set up in a health center of 440 architectural beds as well as 375 administrative beds. This heater should have the capacity to shed from 180 to 220 kilo daily of medical waste and natural waste.
2. One heater to burn run out medication that can incinerate around 500 kg of medicines or around 4,000 kg of run out medicine per day.a biology research laboratory makes use of an average of 2 000 rats annually and also we intend to have a tool to blaze and also stay clear of placing them in the landfill.-Muhimbili National Health center.
– Kigoma Regional Health Center.
– Ndanda Mission Health Center.
– Musoma Regional Health Center.
– Mnazi Mmoja Hospital in Zanzibar. waste Incinerator that can be set up in a truck and also goes to various cities to blaze Community Solid Waste, indicates all type of waste, plastic, organic.a commercial incinerator to 1000 pounds per hr, for natural substratum as well as waste,.
he would like to know benefits of each burner.
and use: gas or diesel, averages and rates individually,.
He wants a heating system (economizer) for water 60 ° C, and to know the required water circulation. presure ahead 500 mts and into in 3 kg/cm2 vessel.ACL Healthcare facility, Abuja (Nigeria)

Mmedical waste burner capable of disposing as much as 0.25 cubic meter of transmittable or pathological waste.

burner for medical waste

burner for medical waste.Controlled air clinical waste incinerator created for incineration of bio-medical waste produced at a blood-processing center. The waste to be dealt with mainly includes bio-waste (i.e. physical liquids), contagious and also contaminated materials such as syringes, needles, and other clinical waste (i.e. silicon rubbers, plastic, textiles, documents, packs, and so on). a diesel fired clinical waste burner with a capability of 300Kg/hr. to be installed at a waste disposal site away from populated locations.

Requirements
1) Prospective Buyer or Maker ISO 9001 Certified
2) Respecting worldwide exhaust requirements
Electric features
3) A 230V, 60Hz single-phase electric resource.
4) Protections against over-voltage as well as over-current line problems.
5) Conformity with appropriate Ghanaian standards and also policies.
Operational characteristics
6) Two-stage incineration with dual chamber combustion.Incinerator with Oil Heater.
Require Quantity – – 1 complete Unit/ Establish
Kind of Materials To be Shed –– Solid Waste
Burner Capacity – – 0.2 Kw (200 watts )
Ability –– 2 ton per day
Oil Container ability of Burner – – 300 Lit Oil pump ability – – 0.4 Kw (400 watts ). clinical waste Incinerators for melting healthcare facility waste so we are trying to find a resource

INCINERATEUR COMBUSTION DAMAGE OF MEDICAL WASTE PYROLYTIC As Well As LAB

Use diesel, construction in repainted steel resistant aluminium at heats, fire gadget control indicator, charging indication, temperature control device, melting ability of 250 kg/ hr in two phases (primary and second electronic camera).
INCINERATEUR COMBUSTION DESTRUCTION OF MEDICAL WASTE PYROLYTIC AND ALSO LAB.
1. CAPACITY OF WASTE DISPOSAL: 50à60 kg/ h.
2. ABILITY OF PROCEDURE WITHOUT PREVENTING: 10h.
3. SUITABLE FOR WASTE CATEGORIES A, B, C, D As Well As E MEDICAL WASTE BY UNEP As Well As THAT.
4. COMBUSTION “PYROLYSIS” by controlling the waste gasification.
5. CALORIFIC LOWER (LCP) WASTE OF THESE MUST BE OF 3500 KCAL/ H. an incinerator with filling sign, temperature level control functions and with 2 chambers (key and additional).
6. TEMPERATURE LEVEL MAX 1400oC DESTRUCTION.
7. MIN TEMPERATURE OF DESTRUCTION 850oC.
8. SHEDDING ROOM NUMBER: 2 (PRIMARY As Well As SECONDARY).
9. VOLUME CHAMBER: 1200L.
10. DIMENSION OF THE PACKING DOOR: 70CMX70CM.
11. GAS TYPE: DIESEL.
12. POWER SUPPLY: 220 V/ 380 V.
13. SMOKESHAFT ELEVATION: 40 CM.
14. BURNER.
15. VANTILLATEUR BLOCK.
16. BOX CONTROL AND REGULATION.Diesel clinical waste burner made of steel repainted in aluminum.
as well as resistente to high temperatures, device indicator for fire.
control, packing indication, temperature control gadget, burning.
capability of 250Kg/ 10 hrs in 2 phases (primary chamber and.
additional chamber.one should burn 50Kg/hr an additional 600Kg/hr and an additional, 1000Kg/hr. I have visited your internet site as well as would like to ask the complying with inquiries:.
1. Are these units sustained by gas?
2. Do the units ship totally constructed or in items?
3. Are smoke stacks consisted of?
4. Can the systems be set up within a city area or should they be outside city limits?
5. What floor area does each system call for?
6. What sort of enclosure is needed?
7. What is the typical fuel intake for each unit?

Medical waste incineration system

Medical waste incineration system of 300 kg/hr shed price with dual fuel (gas as well as diesel) type, daily 8-16 hrs procedure and a pile elevation of 15 meter.Primary burning
i. The main combustion chamber will be accepted as the key burning zone;
ii. The minimal burning temperature of the main chamber will not be much less than 800 degrees C;

Second combustion
The home time in the second chamber shall not be less than 2 secs;
The gas temperature as measured versus the inside wall in the second chamber, not in the flame zone, will not be less than as indicated in Lots 1-7;
Both the main and the additional temperature levels shall be preserved till all the waste has actually been entirely combusted;

Smokeshaft
The smokeshaft shall have a minimum elevation of 4 meters over ground degree;
The minimal departure rate of the exhausts will not be much less than 10 metres/second; 1. Capability of destruction in weight: 60 Kg/h.
2. It must have the ability to operate not less than 10 hours/day
3. This burner has to be able to ruin all combustible wastes produced by healthcare facilities, private clinics, research laboratories, institutes, and so on.
4. Style Requirements: Types A, B, C, D, and E of clinical waste
5. ” PYROLYTIC” burning, by regulating the gasification of waste.
6. The burner has to stay clear of the release of black smoke as well as great dust, (Electric) during the loadings.
7. It must be able to lower the quantity of wastes by 98%.
8. It must be able to hold emission in the 2nd melt with gas house of not less than 2 seconds.
9. The incineration ought to be totally devoid of noticeable smoke in addition to offensive odours.
10. The lower calorific power (L.C.P) of this waste will certainly be 3,500 kcal/kg
– The Temperature levels of burning: Minimum will certainly be 850oC as well as max 1400oC
– Post burning: >> 1100oC.
11. The Interior diameter of the Smokeshaft: Ø 400 and its height: 8 m.
12. The Volume of the combustion chamber: 1.200 L.
13. The Measurement of the door for loading in cm: 70×× 70.
14. Heater procedure must be Automatic On/Off.
15. Fuel: diesel.
16. The vendor has to supply necessary details for the very best of the setup.
This incinerator with “PYROLYTIC” burning should have:.
17. A burning chamber of waste:.
* Completely limited door for the hand-operated loading of waste. The loading ought to be Guidebook, Batch Tons.
* A burner of lights which the usage is restricted to the ignition of waste.
* Frontage of packing with door seals gone up on hinges, wheel of screw plug, versatile joint, and packing protecting out of refractory.
* The insulation of the combustion chamber need to be composed of refractory blocks, having a high web content of aluminium and insulates bricks in order to assure a minimum temperature on the outside sheet steel.
* Composition of the refractory;.
– Refractory concrete:
. Density: ≥ 100 mm
. Nature: 42% of Al203.
– Shield in coarse panels:
. Thickness: ≥ 75 mm.
– Nature: Calcium silicate.
* Heater of lights of waste, with fuel, common mono-bloc casting guiding plunging fire, lights and also safety and security of digital ignition, long-term air flow, electromagnetic sluice entrance of regulation and also separating valve.
* Plate of combustion in Carborundum, avoiding the repairing of glass and slags.

18. A chamber of article combustion of gases.
* A heater of combustion of gases,.
* A device of injection of air enabling a complete recombustion of gases,.
* A gadget of air inlet of cooling of waste gases,.
* A sheath of evacuation of the gases charred.
* Carcass in solid sheet steel with assistance of link.
* Make-up of the refractory;.
– Refractory concrete:.
Density: ≥ 150 mm.
Nature: 65% of Al203.
– Shield in fibrous panel:.
Density: ≥ 85 mm.
Nature: Calcium.
* Burner with fuel, mono-bloc spreading leading kind with straight flame, illumination and safety and security of digital ignition, irreversible ventilation, electro-magnetic sluice gateway of regulation and separating shutoff.
* A second shot of air to guarantee best oxygen web content.
19. A control box making certain the full cycle of burning.

20. Fan:.
* Electro-ventilator dispersing the secondary air, the guideline of the air flow being carried out by valves and also adhering to the control of the automatic cycle.
21. Controls and guidelines:.
Control box watertight to dirt, consisting of:

* A button breaker for every engine (ventilators as well as burners).
* A timer with flexible temporization for the law of each burner.
* A regulator with digital watching for the temperature of combustion.
* A regulatory authority with watch for the temperature level of postcombustion.
* Electric box.

21. The de- ashing must be performed in all-time low of the burning chamber or the deashing ought to be Automatic or hands-on batch de ashing.
22. Refine Filtering system: Scruber to be mentionned as optional.
23. Exhaust Requirements Conformity: BS 3316 or équivalent requirement.
23. Capability to deal with Plastic: Not much less than 40% by weight.
24. CE Manufacturing Compliance: BS EN 746-2-1997.
22. The provider should provide sets of spare parts of very first urgency and consumable of the incinerator.
23. The set up incinerator should birth a one year guarantee.
24. The provider will perforn an onsite setup of the burner.
25. The technological training of operators will have to be provided as well as provided by a professional.
from the factory; it will consist of alleviative and preventative upkeep, as well as using device, etc

Various Sorts Of Incinerators

hazardous waste high temperature incinerators for the therapy of contaminateds materials. The waste will certainly be blended, including medical, oily wastes, woods as well as lab wastes. Key combustion
Diesel/LPG/LNG burning main combustion chamber/primary burning area
Additional combustion
Home time in the second chamber not much less than 2 seconds
Both primary and the second temperature levels preserved till all the waste has been completely combusted
Chimney
Smokeshaft with a minimal elevation of 4 meters above ground level
Minimum leave speed of the discharges not less than 10 metres/second
Temperature level Cautions
Distinct and/or noticeable alarm to caution the driver when the additional temperature level drops to below the required temperature
General
Control box that can be detached and placed on separate stand at least 1.5 meters from incinerator at around 1.6 meter height

Burner version A.
Burn Price 65kg/h minimum.
Weight (kg), please suggest:.
Second Chamber.
Gas Retention Time – – 2 Seconds. Fuel – Diesel/LPG/LNG, please suggest. Power Supply for – Control Box – 220V-240V 50Hz single phase. Minimum operating temperature 850 ° C, please suggest. One year Spare Components Bundle for complete maintainability. 10m Tube Pipeline, suggest length.
I000 Litre Gas Tank + Pipe System, indicate volume.
Added chimney extension, indicate elevation.
Warranty, suggest no of years

Burner design B.
Burn Price 150kg/h minimum.
Weight (kg), please show:.
Second Chamber.
Gas Retention Time – – 2 Seconds. Diesel/LPG/LNG, please indicate. Power Supply for Control Box- 220V-240V 50Hz solitary phase.
Minimum operating temperature 920 ° C, please suggest.
One year Spare Parts Package for full maintainability.
10m Pipe Pipe, show size.
I000 Litre Gas Container + Pipe System, show quantity.
Additional smokeshaft expansion, indicate elevation.
Warranty, show no of years

Burner version C.
Burn Price 250kg/h minimum.
Weight (kg) please indicate:.
Second Chamber.
Gas Retention Time 2 Seconds.
Fuel Diesel/LPG/LNG, please show.
Power Supply for Control Box 220V-240V 50Hz single phase.
Minimum running temperature 920 ° C, please show.
One year Spare Parts Package for total maintainability.
10m Tube Pipeline, suggest length.
I000 Litre Gas Tank + Pipeline System, show quantity.
Added chimney expansion, show height.
Service warranty, indicate no of years

Whole lot 4– High Temperature Waste Incinerator.
HTW Incinerator design D.
Burn Price – – 150kg/hour minimum.
Weight (kg), please indicate:.
Secondary Chamber.
Gas Retention Time 2 Seconds.
Gas Diesel/LPG/LNG, please indicate.
Power Supply for Control Box 220V-240V, single phase 50-60Hz.
Minimum operating temperature 1200 ° C, please indicate.
One year Spare Components Package for total maintainability.
10m Hose Pipe, indicate length.
1000 Litre Gas Tank + Pipeline System, indicate volume.
Additional chimney expansion, indicate elevation.
Warranty, show no of years

Whole lot 5– Mobile Burner.
Mobile Incinerator model E.
Burn Rate 50kg/h minimum.
Weight (kg), please indicate:.
Additional Chamber.
Gas Retention Time – – 2 Seconds. Gas – Diesel/LPG/LNG, please indicate. Power Supply for – Control Box – 220V-240V 50Hz solitary phase. Minimum running temperature 850 ° C, please indicate. One year Spare Components Bundle for complete maintainability. 10m Hose pipe Pipe, show length.
1000 Litre Gas Storage Tank + Pipe System, show volume.
Added chimney expansion, indicate height.
Guarantee, indicate no of years

Lot 6– Mobile Incinerator.
Mobile Burner model F.
Burn Rate 100kg/h minimum.
Weight (kg), please suggest:.
Additional Chamber.
Gas Retention Time – – 2 Seconds. Fuel – Diesel/LPG/LNG, please indicate. Power Supply for – Control Box – 220V-240V 50Hz single stage. Minimum operating temperature 850 ° C, please suggest. One year Spare Components Bundle for full maintainability.
10m Tube Pipe, suggest length.
1000 Litre Fuel Tank + Pipeline System, indicate quantity.
Additional chimney expansion, suggest elevation.
Guarantee, show no of years

Great deal 7– High Temperature Waste Mobile Incinerator.
HTW Mobile Incinerator design G.
Burn Rate 100kg/h minimum.
Weight (kg), please indicate:.
Second Chamber.
Gas Retention Time – – 2 Seconds. Gas – Diesel/LPG/LNG, please indicate.
Power Supply for Control Box – – 220V-240V 50Hz single phase.
Minimum operating temperature 1200 ° C, please show.
One year Spare Parts Plan for complete maintainability.
10m Hose Pipe, indicate size.
1000 Litre Gas Storage Tank + Pipeline System, show quantity.
Additional chimney extension, suggest elevation