Archive: March 20, 2021

china incinerator manufacturer and exporter

Primary Combustion Chamber
Waste Charging Door: Provided with refractory lining with sealing gaskets
Ash Removed Door: Provided with refractory lining with sealing gaskets
Outer Body MOC: Mild Steel, 5mm
Primary Chamber: Stainless Steel
Operating Temperature :800. ± 50◦C
Insulation: Insulation Brick
Heating Elements Type: Kanthal Al Grade
Power Consumption: 75 KW ( Initial Load )
Electrical Supply :3 Phase 440 Volt
Control Panel
MOC: Mild Steel Power Coated
No. of Temp: Controllers : 2 Nos
Details: The Control Panel will be provided with contract as relays , switches , indicators etc . Operative on 3 phase.
I.D.Fan
Type: Centrifugal Type
MOC: Mild Steel
Capacity:2 HP/3Phase
Make of Motor: Kirloskar /Havells/Crompton
Combustion Air Fan
Type: Centrifugal Type
Capacity: 1HP/3Phase
Make of Motor: Kirloskar /Havells/Crompton

low-cost medical waste incinerator

Stack:
Type:  Wire Supported
MOC:  Mild Steel of ISstd
Height :3 Meters or more
• PROCESS AT LEAST 1 METRIC TON OF WASTE PER DAY
• OPERABLE BY 1 PERSON, WITH NO TRAINING REQUIRED
• REGULAR MAINTENANCE CAN BE COMPLETED BY 1 PERSON WITH LIMITED TRAINING
• REGULAR MAINTENANCE SHOULD NOT EXCEED 1-HOUR PER DAY
• COMPLIES WITH EURO / OR US-EPA EMISSION STANDARDS
• ABILITY TO INCINERATE WASTE PETROLEUM, OILS, AND LUBRICANTS
• TEMPRATURES DURING THE COMBUTION PROCESS MUST EXCEED 1,500 °F FOR AT LEAST 1-HOUR
• CAN BE TRANSPORTED TO AND FROM DEPLOYMENT LOCATION IN A 20-FOOT OR SMALLER SHIPPING ISO CONTAINER
• CAPABLE OF 24 HOURS OF CONTINUOUS USE
• AUTOMATIC LOADING SYSTEM
• AUTOMATED ASH REMOVAL SYSTEM
• GAS SCRUBBING SYSTEM
• 95% REDUCTION OF SOLID WASTE
• OPERABLE WITH DIESEL, JP8, OR FUEL OIL
• CAPABLE OF BURNING 4 UNITS OF WASTE PER UNIT OF FUEL
• ABLE TO INCINERATE COMBUSTIBLE WASTE TO INCLUDE: PAPER, PLASTIC, CARDBOARD, FOOD, USED OILS, SLUDGE, OILY RAGS, AND

WOOD PALLETS.
• NO PRE-TREATMENT OF WASTE REQUIRED
• VENDOR REPAIR OFFERED AT POINT OF SHIPMENT
• FIVE (5) YEAR COMPONENT WARRANTY FROM DATE OF ACCEPTANCE
We are an aerosol manufacturing company.. Our products includes Deodorants, Anti perspirant deodorants ,air freshners,

Insect killers etc..

infectious waste pyrolysis machine chinalarge animal incinerators

Major components are – Ethanol, Paraffin, Silicon, Aluminium chloro hydrate, Bentone ,LPG

quote for incinerators for industrial chemical wastes treatment,

1 burning rate must be Average 30kgs/h
2 inside of chamber material must be refractory concrete cement
3 it works in three system diesel oil/ Natural gas or LPG
4 voltage must be 220V

5 inside temperature first must be 1000c  and second must be 1200c
6 pipe length must be 20 M

Our requirements are  for 125 kg/hr and 42 kg/hr, please send quote with catalog for both options
We are currently dealing in Defense Related Equipment, Construction Assistance and Medical Equipment, Modular Solutions

for Hospitals, Waste Management System, CSSD, Hospital Furniture and Services. We are based in the Capital city of

Pakistan i.e. Islamabad ,where there are all the head offices of Military and Govt. institutions. We have the capacity to

Participate in tenders and we also have a strong network of energetic/active dealers and sales staff in Pakistan and

Afghanistan.
5 incinerator 15 kg the specifications High temperature incinerator​99% combustion efficiency Temperature up to 1200°C or

Smoke and smell free Excellent heat retention Electric powered​ Fast heatup times Temperature Up to 1200°C or as required

Capacity​15 Kg Burning Efficiency 98% Noise- <78db Power – Electric Chamber​Single / Dual chamber Safety Alarm Emergency

vent Monitoring device​ Air Pollution Control Device​ CE and ISO Certified

I ‘d like to ask you about a power plant by burning waste. We have many of camps for displaced people in Syria, and we

want to buy a plant to generate electricity by municipal waste incineration Please send me an offer or any details.

portable medical waste incinerator manufacture companies in china

Capacity: 20KG/Hr, Temp Range: 600 Deg. C – 1100 Deg. C

Fuel Supply: Natural Gas/Diesel

Dual Combustion Chamber Complete Scrubbing System (Dual

Resultant Gas Washer), Dual Blower, Chimney Height: 8m

Electric Supply: 220/240Volt, Single Phase

1.    Type of waste: Trash
2.    Any other type:
3.    Quantity of waste generated per day in kg: (50 Ton per day) SOW
4.    Duration – incinerator will be used per day: (Minimum 12 hours) SOW
5.    Approximate moisture content:
6.    Local incinerator operating and emission standards: US-EPA
7.    What is the height of the chimney required: Not known
8.    Fuel proposed to be used: Deiseal Oil
9.    Availability of power and type: 220 or 110
10.    Details of space available: Plenty of space
11.    Do you require an automatic loading system: [**] Yes  [**] No
12.    Do you require a gas scrubbing system: [**] Yes  [ ] No
13.    How soon do you require the system to be delivered: 30
14.    Any other specific requirements:
15.    Nature: (Solid/Semi-solid/Liquid)

medical waste incinerator

Australian combustion engineering proprietary 5 25kg/hour
dual chamber(LPG) incinerator or equal approved. incinerator
casing to be mild steel with 125mm refractory lining including
primary and secondary chamber, insulated draft section above
secondary chamber, package burners, digital temperature control
systems, ash rake and poke, second door in primary chamber,
manual loading chute, semi automated operated counter balanced
loading door with loading tray complete with stainless steel flue
recommended spare parts.

Incinerator to cut black bag landfill waste

30 August 2013 Last updated at 21:18 BST

BURNING AND INCINERATION OF SOLID WASTE

Biomedical Waste                    Any solid or liquid waste which may present a threat of infection to humans including non-liquid tissue, body parts, blood or blood products and body fluids, laboratory and veterinary waste which contains human disease- causing agents, and discarded sharps (i.e. syringes, needles, scalpel blades).
 
Bottom Ash                                 The course non-combustible and unburned material which remains at the burn site after burning is complete. This includes materials remaining in the burn chamber, exhaust piping and pollution control devices where such devices are used.
 
Burn Box                                      A large metal box used to burn solid waste. Combustion air is usually supplied passively through vents or holes cut above the bottom of the box. An exhaust pipe or stack may or may not be attached.
 
 
 
 
Commercial Camp                   A temporary, seasonal or multi-year facility with a capacity greater than 15 people and which has been established for research, commercial or industrial purposes. A commercial camp does not include a traditional camp or field camp.
 
Commissioner’s Land             Lands that have been transferred by Order-in-Council to the Government of Nunavut. This includes roadways and land subject to block land transfers. Most Commissioner’s Land is located within municipalities.
 
Contaminant                             Any noise, heat, vibration or substance and includes such other substance as the Minister may prescribe that, where discharged into the environment,

• endangers the health, safety or welfare of persons,
• interferes or is likely to interfere with the normal enjoyment of life or property,
• endangers the health of animal life, or
• causes or is likely to cause damage to plant life or to propert

 
Determined Effort                    The ongoing review of opportunities for reductions and the implementation of changes or emission control upgrades that are technically and economically feasible and which result in on-going reductions in emissions. Determined efforts include the development and implementation of waste management planning which is focussed on pollution prevention.
 
De Novo Synthesis                   The creation of complex molecules from simple molecules.
 
Environment                              The components of the Earth and includes

• air, land and water,
• all layers of the atmosphere,
• all organic and inorganic matter and living organisms, and
• the interacting natural systems that include components referred to in paragraphs (a) to (c) above.

 
Field Camp                                  A temporary, seasonal or multi-year facility consisting of tents or other similar temporary structures with a capacity of 15 people or less and which has been established for research, commercial or industrial purposes.  A field camp does not include a traditional camp or commercial camp.
 
Fly Ash                                          Unburned material that is emitted into the air in the form of smoke or fine particulate matter during the burning process.
 
Hazardous Waste    A contaminant that is a dangerous good and is no longer wanted or is unusable for its original intended purpose and is intended for storage, recycling, treatment or disposal.
 
Incineration                                A treatment technology involving the destruction of waste by controlled burning at high temperatures.
 
 
 
 
Incinerator                                  A device or structure intended primarily to incinerate waste for the purpose of reducing its volume, destroying a hazardous substance in the waste or destroying an infectious substance in the waste. An incinerator has means to control the burning and ventilation processes.
 
Inspector                                     A person appointed under subsection 3(2) of the Environmental Protection Act and includes the Chief Environmental Protection Officer.
 
Modified Burn Barrel              A metal drum used to burn waste that has been affixed with devices or features which provide limited increased heat generation, heat retention and holding time.
 
Open Burning                            Burning of waste with limited or no control of the burn process. For clarity, open burning includes burning on the open ground or using a burn box or unmodified or modified burn barrel.
 
Qualified Person                       A person who has an appropriate level of knowledge and experience in all relevant aspects of waste management.
 
Responsible Party                    The owner or person in charge, management or control of the waste.
 
Smoke                                  The gases, particulate matter and all other products of combustion emitted into the atmosphere when a substance or material is burned including dust, sparks, ash, soot, cinders and fumes.
 
Solid Waste                                 Unwanted solid materials discarded from a household (i.e. single or multiple residential dwellings, other similar permanent or temporary dwellings), institutional (i.e. schools, government facilities, hospitals and health centres), commercial (i.e. stores, restaurants) or industrial (i.e. mineral, oil and gas exploration and development) facility.  For clarity, solid waste does not include biomedical waste, hazardous waste or sewage sludge.
 
Traditional Camp                      A temporary or seasonal camp used primarily for camping, hunting, fishing or other traditional or cultural activities. A traditional camp does not include a field camp or commercial camp.
 
Unmodified Burn Barrel         A metal drum used to burn waste that has not been affixed with devices or features which provide for enhanced heat generation, heat retention and holding time.
 
Untreated Wood                      Wood that has not been chemically impregnated, painted or similarly modified to improve resistance to insects or weathering.
 
Waste Audit                                An inventory or study of the amount and type of waste that is produced at a location.
 
 

China incinerator

Incinerator Of Burning Capacity 30 kg/hr = 1 No
The Incineration System comprises of:
I. Main Incinerator with
A. Refractory lined Primary and Secondary Chamber.
B. Refractory lined main charging door and ash cleaning door.
II i. 1 No. fully automatic oil burner for primary chamber.
ii. 1 No. fully automatic oil burner for secondary chamber.
III.Centrifugal forced draft combustion air fan with motor.
IV. Flow measurement device on the Pri mary & Secondary air ducting.
V. Auto-loading in the form of Double FDV mechanism with outer gate
manual and inner motorized.
VI. Emergency stack / vent.
VII. High pressure Venturi scrubber of SS316 L
VIII. Cyclonic type droplet separator cum recirculation tank in Mild steel
rubber lined ( MSRL) construction.
IX. I.D. Fan with MSRL casing & SS 316 L impeller with motor.
X. Recirculation Pump (SS 316) with Motor along with piping & valves in
SS 316.
XI. Overhead HDPE Water tank for scrubber along with water piping
between tank and scrubber.
XII. Interconnecting ducting within the battery limits.
XIII. Instruments, valves, dampers and fittings within battery limits.
XIV. PLC based Control Panel with necessary instruments.
XV. Data recording device in the form of Printer.
XVI. Oil tank of 500 ltr capacity along with oil piping, valves & strainers
between tank & burner.
XVII. Operati ng tools & tackles like rake, hoe, shovel, two teeth scrapper.
XVIII. Caustic dosing system comprising of Tank- Agitator and pump
XIV. FUEL LDO DIESEL.

manufacturer of ha zardous waste incinerator in china

Burning Capacity: 125 kg minimum/time (3-6times/day), double chamber, double combustion system
Imputing door Mouth Width (mm): 760*760 (approx.)
Chimney External Diameter (mm): 300 ± 10
Combustion Improver Device: 0.11kw, Fuel consumption: 7kg/ hour (max)
Re-Burning Device: Oil consumption: 5kg/h, 0.37kw, Oil consumption: 10-20kg/h
Voltage: 380v/220v AC, Warranty: 1 Year, 50 Hz
Per your advertisement for 300 kg.hr. Model – We need to know the price via return.
How many Kg. of Fuel would be required for running this Model 10 hrs. everyday.
We have our own Freight Forwarding Agent.
We had a Contract for Garbage Management before their Civil War for 120 Tons/Day for one Municipality in North Africa
Medical Waste Incinerator
Dual Chamber (Primary & Secondary) with insulation slabs (fully insulated internal refractory lining) along with
controlled air blower for each chamber
Insulation / Refractory Thickness: ≥ 100mm
Chamber plate thickness: ≥ 6mm
Fuel Type: Natural gas based on burning fuel in combustion chambers
Waste Capacity: ≈ 150 Kg/Day
Incineration capacity: ≈ 25 Kg/Day (Separate waste charging and waste removal doors)
Burners: At least with (02) burners of automated start and stop functions
Combustion efficiency: > 97%
Temperature: programmable temperature with temp monitoring system
Residence time: 2 second in secondary chamber
Heating value: 4000 Kcal
Temperature Range: ≈ min 800ºC to max 1200ºC
Electrical supply: 220V with single phase
Chimney Plate Thickness: ≥ 5mm
Water scrubber: Scrubbing using reagent like lime & should made of SS 10 gauge of non-corrosion properties and painted
exteriorly by equipment grade heat resistive enamel
Chimney Height: between 15-25 feet

Mobile Small Scale Medical Waste Incinerator with Trolley or Wheel

Mobile Small Scale Medical Waste Incinerator with Trolley(E-Power) or Wheel

Model		YD-30
Picture
Burning Rate		average 30 kgs/hour
Feed Capacity		average 40 kgs
Paimary Combustion Chamber		200 Liters
Secondary Combustion Chamber		100 Liters
Mix Combustion Chamber		Yes
Feed Mode		Manual
Voltage		220V
Power		0.59Kw
Fuel Type		Diesel Oil
Burner		Italy Original
Oil Consumption (Diesel Oil)		average 13.3 kg/hour
Gas Consumption (Natural Gas)		***
Internal Dimensions		80 x 50 x 50cm (paimary chamber)
External Dimensions		125 x 90 x 180cm (without chimney)
Temperature Monitor		Yes
Oil Tank Capacity(if oil fuel)		60 Liters
Door Opening		40 x 40cm
Chimney Length		1.0 Meters
Chimney Type		Stainless Steel
Equipment Gross Weight		1500/1700 kgs

1 INCINERATOR BURNER 1N 230V, 50/60Hz , 0.32 KW, IP 40, Brand: BALTUR , Made in Italy (Attached Per Name Plate and specification ) Complete Set Set 1 

2 INCINERATOR BURNER 1N 230V, 50/60Hz , 0.15 KW,IP 40, Brand: BALTUR , Made in Italy (Attached Per Name Plate and specification ) Complete Set Set 1 

3 INCINERATOR BURNER , 220V, 50 Hz, 119 KW, CX 10 , Brand: CAREER (Attached Per Name Plate and Photo Specification) Complete Set Set 1 

4 INCINERATOR BURNER, 220V, 50Hz, 172 KW, CX 14, Brand: CAREER (Attached Per Name Plate and Photo Specification) Complete Set Set 1 

5 Controller for incinerator , Model: LOA24.171B2BT, Brand: SIEMENS, 220-240VAC , 50/60 Hz, 3 VA, Made in Germany (Attached Per Photo Specification) Each 1 

6 Controller for incinerator , Model: LMO14.111 C2BT, Brand: SIEMENS, 230VAC, 50/60 Hz, TSA Max: 10s , Made in Germany (Attached Per Photo Specification) Each 1 

7 Temperature Contorl Unit for incinerator, Brand: XMT , Made in CHINA (Attached Per Photo Specification) Each 1 

8 Timer for incinerator (Super Timer Multi -Range Type, Type: ST3P A-F, Input: 200-220 VAC, 50/60 Hz, Contact Rating : AC 200V IND Load, Making : 3A with Base, Made in CHINA (Attached Per Photo Specification) Each 2 

9 Ignition Transformer for incinerator, Type : TC2STCSF, Code : 15910662, Primary : 220-240V, 30VA, 50/60 Hz, Secondary: 2X12KV, 20 mA, AB 100% T60 H , Made in ITALY (Attached Per Photo Specification) 

For medical and animal waste

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-06-30