Tag: wasteincinerators

Incinerator YD-500 for Vietnam

 We finish this project in year 2010 to 2011 and delivery to Hochiminh port, Vietnam with 1×40’feet open top full container.


Items/Model YD-500
Burning Rate (kgs/Hour) 500 kgs/Hr.
Feed Capacity (kgs) 800 kgs
Equipment Weight 13000 kgs
Primary Chamber (Liters) 4000
Secondary Chamber (Liters) 1500
External Dimensions (cm) 320x220x460
Internal Dimensions (cm) 257x147x108
Oil Tank(Liters) 500
Door Opening (cm) 108 x 128
Chimney (M) 14
Chimney Type Stainless Steel
Secondary Chamber  YES
Mix-Combustion Chamber YES
Smoke Filter Chamber YES
Combustion Fuel Oil/Gas
Residency Time 2.0 Sec.
Temperature Monitoring YES
1st. Chmaber Temperature 800–1000
2nd. Chmaber Temperature 1000-1200


Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

GENERAL SPECIFICATIONS FOR INCINERATORS

Primary and secondary burners: Separate electrically spark-ignited primary burners and secondary burners with automatic control shall be used to achieve the specified temperature requirements in the primary and secondary chambers. The flames  of the primary and secondary burners shall not impinge on the incinerator walls or floor.
The primary combustion chamber must:

1.    Be accepted as the primary combustion zone.
2.    Be equipped with a burner/s burning gas/fuel or low sulphur liquid fuels.
Other combustion methods will be judged on merits.

3.    Ensure primary air supply is controlled efficiently

Ensure minimum exit temperature is not less than 850oC

Air supply: Air supply in the primary and secondary chamber should be regulated between 30%-80% and 170%- 120% of stoichiometric amount respectively. Suitable flow measurement devices shall be provided on the primary and secondary air ducting. The combustion air shall be supplied through a separate forced draft fan after accounting for the air supplied through burners.The secondary combustion chamber must:

1.    Be accepted as secondary combustion zone.
2.    Be fitted with secondary burner/s burning gas or low sulphur liquid fuel or any suitable fuel.

3.    Ensure secondary air supply is controlled efficiently.

4.    Ensure flame contact with all gases is achieved.

5.    Ensure residence time is not less than two (2) seconds.
6.    Ensure the gas temperature as measured against the inside wall in the secondary chamber & not in the flame zone, is not less than 1100oC.

7.    Ensure the oxygen content of the emitted gases is not less than 11%.
Ensure both primary and the combustion temperatures are maintained until all waste has been completely combusted

lnsulation: lnsulation to be used for masonry, reinforced concrete, or non-combustible material shall prevent damage to the foundation from excessive heat and shall be of a thickness to limit the outer casing to a maximum temperature of 66°C in an ambient temperature of 21°C when the incinerator is operating at full capacity.

Refractory: Refractory shall be #super duty# and heat-resistant to a minimum of 1100°C in the primary chamber and 1250°C in the secondary chamber. Refractory shall also be abrasion resistant in the prlmary chamber, constructed of plastic or castable type refractory, designed to prevent bulging and destruction due to heat stress, capable of supporting more than twice the hourly burning rate and preventing leakage of fluids, and with a minimum thickness of 11O mm for walls and hearths

Incinerator YD-100 for Iraq

 There are 03 sets Model YD-100 delivery to Iraq between year 2013 to 2014. The incinerator use for local several construction sites and all fuel type is diesel oil.

 

Items/Model YD-100
Burning Rate (kgs/Hour) 100 kgs/Hr.
Feed Capacity (kgs) 200 kgs
Equipment Weight 5300 kgs
Primary Chamber (Liters) 1200
Secondary Chamber (Liters) 500
External Dimensions (cm) 220x180x360
Internal Dimensions (cm) 130x100x90
Oil Tank(Liters) 300
Door Opening (cm) 55 x 80
Chimney (M) 10
Chimney Type Stainless Steel
Secondary Chamber  YES
Mix-Combustion Chamber YES
Smoke Filter Chamber YES
Combustion Fuel Oil/Gas
Residency Time 2.0 Sec.
Temperature Monitoring YES
1st. Chmaber Temperature 800–1000
2nd. Chmaber Temperature 1000-1200
Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

Incinerator YD-30 for Australia

Incinerator Model YD-30 for Australia Melbourne customer. From year 2011 to 2013, we delivery 02 different model for this customer, one is model SYC-50 (now updated to Model TS50 PLC) and one model YD-30. Both two model is gas fuel type and these incinerator for local family pet cremation business.

Items/Model YD-30
Burning Rate (kgs/Hour) 30 kgs/Hr.
Feed Capacity (kgs) 60 kgs
Equipment Weight 2300 kgs
Primary Chamber (Liters) 360
Secondary Chamber (Liters) 200
External Dimensions (cm) 145x90x175
Internal Dimensions (cm) 100x60x60
Oil Tank(Liters) 200
Door Opening (cm) 48 x 60
Chimney (M) 5
Chimney Type Stainless Steel
Secondary Chamber  YES
Mix-Combustion Chamber YES
Smoke Filter Chamber YES
Combustion Fuel Oil/Gas
Residency Time 2.0 Sec.
Temperature Monitoring YES
1st. Chmaber Temperature 800–1000
2nd. Chmaber Temperature 1000-1200


Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

Dual-chamber controlled air incinerator or dual- chamber pyrolytic incinerator

Types of incinerator design acceptable: Dual-chamber controlled air incinerator or dual- chamber pyrolytic incinerator

Materials of construction: The incinerator shall not have any asbestos, asbestos-containing substances, mercury thermometers, and mercury switches. Refractory materials shall be able to meet relevant standards under ISO TC33 and CEN/TC    187.Waste feed system into the combustion chamber batch or continuous loading: For continuous loading, the automatic charging ram or auger feed system shall be capable of injecting small amounts of waste at frequent intervals and should be able to prevent waste from being fed when the combustion chamber temperature is less than 850°C. In addition, the waste feed should only be able opened at or below 50°C in an ambient temperature of 21°C.Primary combustion chamber: Shall be constructed with a casing (reinforced to withstand internal pressures without deflection or damage to the refractory or other components) supported by a structural frame and provided with refractory lining and insulation
Access doors, openings, and gaps: All access doors, openings, and gaps shall be sealed to prevent emission of smoke and exhaust gas and to block admission of air during incinerator operations. Doors exposed to flame or direct heat of combustion gases shall be lined with the same type and thickness of refractory lining and insulation as that used in the combustion chamber

Grate system for the primary chamber Moving grate, traveling grate, reciprocating grate, or rotating drum grate

Primary combustion chamber temperature # 850°C with no cold spots

Secondary combustion chamber: Shall be constructed with an exterior casing (reinforced to withstand internal pressures without deflection or damage to the refractory or other components) and provided with refractory lining and insulation

Secondary combustion chamber temperature 1100°C or higher

Secondary combustion chamber residence time # 2 seconds after the last injection of air in the secondary chamber

China vows coordination as virus grows



WHO declares outbreak constitutes international public health emergency

China vowed on Friday to work with the international community to uphold regional and international health security, and reiterated it has the confidence and capability to win the battle against the novel coronavirus epidemic, which has claimed 213 lives throughout the country as of Thursday.

The pledge came as the World Health Organization declared on Thursday that the outbreak constitutes a public health emergency of international concern, or PHEIC, following an emergency meeting in Geneva, Switzerland.

The number of confirmed cases of novel coronavirus rose to 9,692 on the Chinese mainland as of Thursday, among which, Hubei province ― the epicenter of the outbreak ― reported 5,806 confirmed infections. The Hong Kong and Macao special administrative regions as well as Taiwan reported 28 confirmed cases of the disease as of Thursday. The virus has also spread to several other Asian nations and reached Australia and Europe as well.

The Centers for Disease Control and Prevention in the United States said Thursday that an Illinois woman who recently returned from China had transmitted the coronavirus to her husband ― the first known case of persontoperson spread of the pathogen in the US.

Foreign Ministry spokeswoman Hua Chunying said in an online statement on Friday that since the outbreak, China has been in close communication and cooperation with the WHO. “China will continue working with the WHO and other countries to safeguard regional and global public health security,” Hua said.

Saying the Chinese government has been taking the most comprehensive and rigorous prevention and control measures for people’s health and safety, Hua added that many of the measures go well beyond the requirements of the International Health Regulations.

“We have full confidence and capability to win this fight against the epidemic,” she said.

Also on Friday, the National Health Commission called on the international community to understand and support China’s efforts in preventing and controlling the epidemic.

The commission hopes countries from around the world will work with China to jointly prevent and contain the disease in line with the International Health Regulations as well as the recommendations of the WHO in order to safeguard regional and global public health security, according to a statement issued by the commission on its website.

WHO DirectorGeneral Tedros Adhanom Ghebreyesus, who recently wrapped up his visit to China, said the declaration was not a vote of no confidence in China. Rather it is necessary because humantohuman infections have been confirmed in other countries.

“As I have said repeatedly since my return from Beijing, the Chinese government is to be congratulated for the extraordinary measures it has taken to control the outbreak, despite the severe social and economic impact those measures are having on the Chinese people,” Tedros said at a news conference after a closeddoor meeting of the Emergency Committee.

Tedros said that the WHO does not recommend limiting trade and movement, and opposes any travel restrictions against China.

“We would have seen many more cases outside China by now, and probably deaths, if it were not for the government’s efforts and the progress they have made to protect their own people and the people of the world,” Tedros said.

“The speed with which China detected the outbreak, isolated the virus, sequenced the genome and shared it with WHO and the world are very impressive and beyond words. So is China’s commitment to transparency and supporting other countries. In many ways, China is actually setting a new standard for outbreak response, and this is not an exaggeration,” he added.

During a telephone conversation with Canadian Foreign Minister FrancoisPhilippe Champagne on Friday, State Councilor and Foreign Minister Wang Yi expressed hope that Ottawa will respect the recommendations of the WHO in an objective and fair manner to ensure trade exchanges and travel of people between China and Canada will not be influenced.

Champagne said Canada highly appreciates China’s strong measures and the open and transparent manner it has conducted itself in prevention and control of the contagion, and is also fully confident of its capability in dealing with the epidemic.

China’s top envoy to the United Nations, Zhang Jun, called on the international community to exhibit “solidarity” in dealing with the outbreak. Addressing a news gathering at UN headquarters in New York on Thursday, Zhang said the WHO recommendations “should be seriously considered” and “there is no reason for measures that unnecessarily interfere with international travel and trade”.

He called for all countries to adopt a responsible attitude, work together to combat the virus and avoid overreacting.

Since the outbreak of the contagion, leaders of foreign countries and international organizations have voiced their support for, and highly commended, China’s efforts to curb the spread of the virus.

Angus McNeice in London and Hong Xiao in New York contributed to this story.


Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

a DUCK farm incinerator

a DUCK farm incinerator, we need to buy a medium size incinerator for biological waste, more specific DUCKS.a pet crematorium in ireland.Equipment Double chamber medical infectious waste incinerator Capacity 10-30 kg per hour Characteristics of waste
Mainly syringes and needles from immunization routine and campaign activities. However, the following average characteristics are considered*:

heating value above 2000 kcal/kg (8370 kJ/kg); content of combustible matter above 60%; content of non combustible solids below 5%; content of non-combustible fines below 20%; moisture content below 30% by weight

Combustion performance: The medica waste incinerator shall be capable of reducing waste to ash not exceeding 10% of the total combustible charges.

Outdoor installation. The medical waste incinerator will be installed outdoors.    All incinerator components shall be suitable for but not limited to outdoor shaded installation, including electric motors, be resistent to corrosion, moisture and related weather elements.

could you please forward me some information. a suitable Incinerator for Incineration of oil, plastic hazardous waste, sludge waste, hazardous filters etc.

Wuhan virus: China mobilises medical teams to fight new coronavirus


WUHAN (Bernama): China is mobilising medical staff to aid Wuhan, the centre of the novel coronavirus (2019-nCoV) outbreak, as the country reported 830 confirmed cases of pneumonia, caused by the virus and 25 deaths by the end of Thursday (Jan 23).

By Thursday midnight, Hubei Province in central China reported 549 cumulative confirmed cases of the new coronavirus pneumonia, with 495 in Wuhan, the provincial capital. Nationwide, 29 provincial-level regions have reported confirmed cases.

Twenty four deaths from the infection were reported in Hubei and one was in the northern Hebei Province, the National Health Commission (NHC) said Friday (Jan 24).

The first group of 135 medical workers from hospitals in Shanghai flew to Wuhan on Friday night. Shanghai is dispatching 405 medical workers in three groups to Wuhan.

Ma Xin, vice president of Huashan Hospital, Affiliated to the Fudan University in Shanghai, said, one hour after he issued a notice of the recruiting in the hospital, three teams, each consisting of one doctor and three nurses, were set up.

An aid team consisting of 205 experienced doctors and nurses from nine hospitals in Guangdong Province has been set up and stands ready to leave for Wuhan, said Tan Linling, an official with the provincial health commission.

Doctors, nurses and experts from hospitals in other places such as Zhejiang and Sichuan have been selected or volunteered to sign up for the task.

Hubei reported 105 new confirmed novel coronavirus cases and an increase of seven deaths related to the new pneumonia disease on Thursday, the provincial health authorities said Friday.

Nationwide, large-scale activities for the Lunar New Year celebrations, including temple fairs, winter sports and exhibitions, have been cancelled, in efforts to minimise large gatherings of people in the novel coronavirus-related pneumonia prevention and control.

Beijing’s landmark Palace Museum, also known as the Forbidden City, will stop admitting visitors from Sunday (Jan 26). The museum said it will notify the public when there is a resumption date.

South China’s Guangdong Province banned the trade of wildlife and related products in the province, as the geographical distribution of Wuhan’s infection cases indicates a close relationship between the outbreak and illegal sales of wildlife in a market.

Confirmed cases of the virus have also been reported in the regions of Hong Kong, Macao and Taiwan, as well as, such countries as the United States, Japan, the Republic of Korea and Thailand.

The World Health Organisation said, it was too early to declare the outbreak of the novel coronavirus in China a public health emergency of international concern while warning that the number of cases may rise, as much about the virus remains unknown.- Bernama
Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.

installation of waste disposable incinerator system

installation of waste disposable system in airport.Incinerator with oil burner
Capacity  2 ton/day, Oil tank 300 l  Oil pump 0.4Kw , Burner 0.2Kw
Model : YD Series
Country of Origin : ITALY.-          Diesel incinerator.

–          25Kg/h. It will have mainly paper, cardboard and food, though also it will incinerate medical waste. So the incinerator shall be able to handle organic and hazardous waste.

–          Spare parts for one year.Burning Capacity: 400kg/ Hr ( Maximum Combustion time is 6 times/ Day)
Chimney External Diameter: not more than 400mm
Fan Power: must not exceed 1.1kw
Voltage: 220V
Oil Consumption: Must not exceed 14kg/hr
Feeding Door Width: not less than 1000x1300mm
Incineration Temparature: 800 Degree or above
Emission:
CO- Must not exceed 100mg/m3
SO2- Must not exceed 400mg/m3
HF( Hydrogen Flouride)- Must not exceed 9mg/m3
NO2- Must Not exceed 500mg/m3
Smoke Dust: Must Not exceed 100mg/m3

–          The design should prevent any release of polluting substances into soil, surface water and groundwater.

–          Combustion zone has to reach at least 860 degrees under the most adverse conditions with at least 6% oxygen. Since it will treat hazardous and organic waste, temperature has to reach at least 1100 degrees for at least 2 second.

–          Flue gases must be cooled to 200 degrees or lower before flue gas treatment. The flue gas cleaning equipment maust be at least two-field electrostatic precipitator/ESP, dust <30mgNm3.

–          Thermal efficiency not less than 85%.

–          It should be equipped with filter to reduce and contain pollutants from organic and medical waste.

–          Easy to operate for almost unskilled workers.

50kgs per hour incinerator with two chambers suppliers from china

50kgs per hour incinerator with two chambers suppliers from china
*Aveage 50kgs per hour
*Double chamber and double burner
*900liters primary combustion chamber
*Italy burner
*Stainless steel chimney

Model

YD-50

 Burning Rate

Average 50 kgs/hour

Feed Capacity

Average 150 kgs

Primary Combustion Chamber

900 Liters

Secondary Combustion Chamber

300 Liters

Mix Combustion Chamber

Yes

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V/380V

Power

0.7Kw

Fuel Type

Diesel Oil/ Natural Gas/LPG

Burner

Italy Original

Oil Consumption (Diesel Oil)

12.1–23.9 kg/hour

Gas Consumption (Natural Gas)

9.9–26.1 m3/hour

Internal Dimensions

120 x 90 x 85cm (primary chamber)

External Dimensions

200 x 160 x 310cm (without chimney)

Temperature Monitor

Yes

Oil Tank Capacity(if oil fuel)

300 Liters

Door Opening

62 x 80cm

Chimney Length

5.0 Meters

Chimney Type

Stainless Steel

Equipment Gross Weight

5500 kgs

Operation Technical Specifications

Primary Chamber Temperature

800–-1000

Secondary Chamber Temperature

1000-1200

Residency Time

2.0 Sec.

Burning Efficiency

98%

Waste Lower Calorific Power

3000Kcal

Medical Environmental 


 
Waste Incinerators
Medical Waste Incinerator
Pet Animal Cremation
Solid Waste Incinerator

Tel:  +86-25-8461 0201   
Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  
Nanjing Clover Medical Technology Co.,Ltd.