Tag: wasteincinerators

Dual-chamber controlled air heater or dual- chamber pyrolytic heater

Types of burner style appropriate: Dual-chamber regulated air heater or double- chamber pyrolytic incinerator

Products of building: The incinerator shall not have any type of type of asbestos, asbestos-containing compounds, mercury thermostats, as well as additionally mercury switches. Refractory products shall have the capability to satisfy pertinent standards under ISO TC33 along with CEN/TC 187. Waste feed system right into the combustion chamber batch or consistent loading: For constant loading, the automatic payment ram or auger feed system shall be capable of instilling percentages of waste at normal periods in addition to should certainly have the capacity to prevent waste from being fed when the burning chamber temperature is much less than 850 ° C. In addition, the waste feed need to just be able opened up at or listed below 50 ° C in an ambient temperature level of 21 ° C.Primary burning chamber: Shall be built with a housing (reinforced to hold up against interior stress without deflection or damage to the various other or refractory aspects) supported by an architectural framework and provided with refractory cellular lining and also insulation
Ease of access doors, openings, and additionally spaces: All access doors, openings, and likewise spaces shall be sealed to stop discharge of smoke as well as exhaust gas and likewise to obstruct admission of air throughout burner procedures. Doors subjected to flame or direct warm of burning gases shall be lined with the specific same kind as well as likewise density of refractory mobile lining and insulation as that utilized in the burning chamber

Grate system for the primary chamber Transferring grate, taking a trip grate, reciprocating grate, or turning drum grate

Main combustion chamber temperature degree # 850 ° C without cool locations

Additional combustion chamber: Shall be created with an exterior case (reinforced to sustain internal stress and anxiety without deflection or damages to the refractory or different other components) along with used with refractory cellular lining as well as insulation

Secondary burning chamber temperature level 1100 ° C or higher

Second burning chamber house time # 2 seconds after the swan song of air in the second chamber

a DUCK ranch heater

a DUCK farm burner, we require to acquire a tool size incinerator for organic waste, a lot more specific DUCKS.an animal dog crematorium in ireland.Equipment Double chamber medical infectious waste burner Capacity 10-30 kg per hr Features of waste
The list listed below average features are thought about *:

residence heating well worth above 2000 kcal/kg (8370 kJ/kg); material of combustible matter over 60%; internet material of non flammable solids listed below 5%; product of non-combustible fines detailed below 20%; moisture material listed below 30% by weight

Burning efficiency: The medica waste burner will certainly be capable of minimizing waste to ash not exceeding 10% of the total flammable prices. The scientific waste burner will be installed outdoors. All burner parts will certainly be appropriate for however not restricted to outside shaded arrangement, consisting of electrical electric motors, be resistent to rust, dampness and also relevant climate aspects.

Outside installment. The clinical waste incinerator will be mounted outdoors. All incinerator components will be suitable for however not restricted to outdoor shaded setup, including electrical motors, be resistent to corrosion, wetness and also related climate aspects.

can you please onward me some info. an ideal Burner for Incineration of oil, plastic hazardous waste, sludge waste, harmful filters etc.

arrangement of waste non multiple-use burner system

installment of waste non reusable system in airport.Incinerator with oil heater
Capability 2 ton/day, Oil storage tank 300 l Oil pump 0.4 Kw, Heating unit 0.2 Kw.
Variation: YD Collection.
– Diesel heater. It will definitely have usually paper, cardboard and likewise food, though also it will absolutely blaze medical waste. The heater will have the ability to deal with natural and also polluted products.
Smokeshaft External Size: not above 400mm.
Fan Power: require to not go beyond 1.1 kw.
Voltage: 220V.
Oil Consumption: Required to not surpass 14kg/hr.
Feeding Door Dimension: not less than 1000x1300mm.
Incineration Temparature: 800 Level or above.
Discharge:.
CO- Have to not exceed 100mg/m3.
SO2- Should not exceed 400mg/m3.
HF( Hydrogen Flouride)- Must not surpass 9mg/m3.
NO2- Must Not exceed 500mg/m3.
Given that it will certainly deal with organic and damaging waste, temperature level has to reach a minimum of 1100 degrees for a minimum of 2 Second. The flue gas cleansing equipment maust go to the very the very least two-field electrostatic precipitator/ESP, dust

– Diesel burner. It will absolutely have typically paper, cardboard and additionally food, though similarly it will definitely incinerate clinical waste. The heater will certainly have the capability to deal with natural and also polluted products. Since it will treat unsafe and natural waste, temperature level has to reach a minimum of 1100 levels for a minimum of 2 2nd.

–– 25Kg/h. It will certainly have generally paper, cardboard and also food, though likewise it will certainly incinerate medical waste. So the burner will have the ability to deal with organic and contaminated materials.

–– Spare components for one year.Burning Capacity: 400kg/ Human Resources (Optimum Combustion time is 6 times/ Day).
Smokeshaft External Size: not greater than 400mm.
Fan Power: need to not surpass 1.1 kw.
Voltage: 220V.
Oil Intake: Need to not surpass 14kg/hr.
Feeding Door Size: not less than 1000x1300mm.
Incineration Temparature: 800 Degree or above.
Emission:.
CO- Have to not surpass 100mg/m3.
SO2- Must not surpass 400mg/m3.
HF( Hydrogen Flouride)- Should not go beyond 9mg/m3.
NO2- Must Not exceed 500mg/m3.
Smoke Dirt: Have to Not surpass 100mg/m3

–– The design need to prevent any type of launch of contaminating substances right into dirt, surface area water and groundwater.

–– Burning area needs to get to a minimum of 860 degrees under the most damaging conditions with at least 6% oxygen. Since it will treat harmful and organic waste, temperature level has to reach a minimum of 1100 degrees for a minimum of 2 2nd.

–– Flue gases must be cooled down to 200 levels or reduced prior to flue gas therapy. The flue gas cleaning equipment maust go to the very least two-field electrostatic precipitator/ESP, dust << 30mgNm3.

–– Thermal efficiency not less than 85%.

–– It must be geared up with filter to minimize as well as include toxins from natural and clinical waste.

–– Easy to operate for virtually inexperienced employees.

Medical waste incineration system

Medical waste incineration system of 300 kg/hr lost price with double gas (gas along with diesel) type, everyday 8-16 hrs treatment and also a stack altitude of 15 meter.Primary burning
i. The primary combustion chamber will be accepted as the crucial burning area;
ii. The marginal burning temperature of the main chamber will certainly not be a lot less than 800 levels C;

Secondly combustion
The home time in the 2nd chamber shall not be less than 2 secs;
The gas temperature as measured versus the inside wall in the 2nd chamber, not in the flame area, will certainly not be much less than as suggested in Lots 1-7;
Both the primary as well as the extra temperature level degrees will be protected till all the waste has actually been totally ignited;

Smokeshaft
The smokeshaft shall have a minimal altitude of 4 meters over ground degree;
The marginal separation price of the exhausts will not be a lot less than 10 metres/second; 1. Capacity of damage in weight: 60 Kg/h.
2. It has to have the capability to run not less than 10 hours/day
3. This burner needs to be able to spoil all flammable wastes produced by health care facilities, private facilities, research laboratories, institutes, and so on.
4. Style Demands: Types A, B, C, D, and also E of professional waste
5.” PYROLYTIC” burning, by controling the gasification of waste.
6. The heater needs to stay clear of the launch of black smoke along with wonderful dust, (Electric) throughout the loadings.
7. It has to be able to decrease the quantity of wastes by 98%.
8. It must have the ability to hold exhaust in the 2nd melt with gas home of not much less than 2 seconds.
9. The incineration ought to be entirely lacking recognizable smoke along with offensive smells.
10. – Article burning: >> 1100oC.
11. The Interior diameter of the Smokeshaft: Ø 400 and its elevation: 8 m.
12. The Quantity of the burning chamber: 1.200 L.
13. The Measurement of the door for filling in centimeters: 70×× × × 70.
14. Heater procedure have to be Automatic On/Off.
15. Gas: diesel.
16. The supplier needs to supply essential details for the greatest of the setup.
This burner with “PYROLYTIC” burning ought to have:
17. A burning chamber of waste:.
* Completely minimal door for the hand-operated loading of waste. The packing should be Guidebook, Batch Tons.
* A burner of lights which the usage is limited to the ignition of waste.
* Frontage of loading with door seals gone up on joints, wheel of screw plug, versatile joint, as well as packaging protecting out of refractory.
* The insulation of the combustion chamber need to be composed of refractory blocks, having a high internet content of aluminium and insulates blocks in order to ensure a minimum temperature level outside sheet steel.
* Structure of the refractory;.
– – Refractory concrete:
. Thickness: ≥ 100 mm.
– Nature: 42% of Al203.
– Shield in coarse panels:.
– Density: ≥ 75 mm.
– Nature: Calcium silicate. * Heating system of lights of waste, with gas, common mono-bloc spreading leading plunging fire, lights as well as additionally safety and security as well as security of electronic ignition, lasting air circulation, electromagnetic sluice entryway of regulation and additionally separating valve.
* Plate of burning in Carborundum, avoiding the repairing of glass and also slags.

18. A chamber of short article combustion of gases.
* A heater of burning of gases,.
* A tool of shot of air allowing a total recombustion of gases,.
* A gizmo of air inlet of cooling of waste gases,.
* A sheath of emptying of the gases charred.
* Carcass in strong sheet steel with help of link.
* Makeup of the refractory;.
– – Refractory concrete:.
Thickness: ≥ 150 mm
. – Shield in fibrous panel:
.
Nature: Calcium.
* Burner with gas, mono-bloc spreading leading kind with straight fire, illumination and also security and protection of electronic ignition, irreversible air flow, electro-magnetic sluice entrance of guideline and separating shutoff.
* A second shot of air to ensure best oxygen internet material.
19. A control box making sure the complete cycle of burning.

20. Fan:.
* Electro-ventilator dispersing the secondary air, the guideline of the air flow being performed by shutoffs as well as also adhering to the control of the automatic cycle.
21. Controls as well as guidelines:.
Control box watertight to dirt, including:

* A switch breaker for every single engine (ventilators in addition to burners).
* A timer with flexible temporization for the law of each burner.
* A regulatory authority with digital watching for the temperature of combustion.
* A regulatory authority with watch for the temperature degree of postcombustion.
* Electric box.

21. The de- ashing must be executed in lowest level of the burning chamber or the deashing should be Automatic or hands-on batch de ashing.
22. Fine-tune Filtering system: Scruber to be mentionned as optional.
23. Exhaust Needs Consistency: BS 3316 or équivalent requirement.
23. Ability to deal with Plastic: Very little less than 40% by weight.
24. CE Production Compliance: BS EN 746-2-1997.
22. The company ought to supply sets of extra components of extremely initial seriousness and also consumable of the burner.
23. The established burner must birth a one year guarantee.
24. The service provider will certainly perforn an onsite setup of the heater.
25. The technical training of operators will certainly have to be provided in addition to provided by an expert.
from the factory; it will include alleviative and preventative maintenance, as well as using device, etc

INCINERATEUR BURNING DAMAGES OF MEDICAL WASTE PYROLYTIC Along With LABORATORY

Usage diesel, construction in repainted steel resistant aluminium at heats up, fire device control indication, billing indicator, temperature level control gadget, melting ability of 250 kg/ hr in 2 phases (2nd and primary electronic camera).
INCINERATEUR BURNING DEVASTATION OF MEDICAL WASTE PYROLYTIC AND ALSO LABORATORY.
1. CAPABILITY OF GARBAGE DISPOSAL: 50à60 kg/ h.
2. CAPACITY OF PROCEDURE WITHOUT PREVENTING: 10h.
3. SUITABLE FOR WASTE CATEGORIES A, B, C, D In Addition To E MEDICAL WASTE BY UNEP In Addition To THAT.
4. BURNING “PYROLYSIS” by regulating the waste gasification.
5. CALORIFIC LOWER (LCP) WASTE OF THESE NECESSITY BE OF 3500 KCAL/ H. a burner with filling up indication, temperature level control features and with 2 chambers (key as well as added).
6. TEMPERATURE LEVEL MAX 1400oC DESTRUCTION.
7. MINUTES TEMPERATURE LEVELS OF DESTRUCTION 850oC.
8. LOSING AREA NUMBER: 2 (PRIMARY Along With SECONDARY).
9. VOLUME CHAMBER: 1200L.
10. MEASUREMENT OF THE LOADING DOOR: 70CMX70CM.
11. GAS KIND: DIESEL.
12. POWER SUPPLY: 220 V/ 380 V.
13. SMOKESHAFT ELEVATION: 40 CENTIMETERS.
14. BURNER.
15. VANTILLATEUR BLOCK.
16. BOX CONTROL AND ALSO REGULATION.Diesel medical waste burner made from steel painted in light weight aluminum.
along with resistente to heats, device indication for fire.
control, packing indicator, temperature level control device, burning.
ability of 250Kg/ 10 hrs in 2 phases (key chamber and also.
added chamber.one should burn 50Kg/hr an added 600Kg/hr and an extra, 1000Kg/hr. I have actually visited your internet site as well as would love to ask the adhering to questions:.
1. Are these units sustained by gas?
2. Do the devices ship absolutely created or in products?
3. Are smoke stacks consisted of?
4. Can the systems be established within a city area or should they be outside city restrictions?
5. What flooring area does each system call for?
6. What sort of enclosure is required?
7. What is the normal gas consumption for every device?

heater for medical waste

heater for medical waste.Controlled air clinical waste incinerator produced for incineration of bio-medical waste created at a blood-processing center. The waste to be handled mainly includes bio-waste (i.e. physical fluids), transmittable and likewise polluted products such as syringes, needles, as well as other clinical waste (i.e. silicon rubbers, plastic, fabrics, papers, packs, and so on). a diesel terminated clinical waste heater with an ability of 300Kg/hr. to be installed at a waste disposal website away from booming places.

Demands
1) Possible Buyer or Manufacturer ISO 9001 Licensed
2) Appreciating worldwide exhaust requirements
Electric attributes
3) A 230V, 60Hz single-phase electric resource.
4) Protections against over-voltage as well as over-current line problems.
5) Conformity with ideal Ghanaian standards as well as additionally policies.
Functional characteristics
6) Two-stage incineration with dual chamber combustion.Incinerator with Oil Heating unit.
Need Quantity – – – – 1 full Unit/ Establish
Type of Materials To be Lost –– – – Strong Waste Burner Capacity – – – – 0.2 Kw( 200 watts) Ability –– – 2 load daily Oil Container capability of Burner – – – – 300 Lit Oil pump ability – – – – 0.4 Kw (400 watts ). scientific waste Incinerators for melting health care facility waste so we are looking for a resource

burner suppliers

incinerator providers.7) Burn cost: 15 – – – – 20 Kg/h 8) Ability: very little less than 130 L.
9) Concentrations of numerous contaminants in heap gases listed below discovery limitations.
10) Gasoline.
11) Electronic system control.
12) Easy to run and also really little training.
13) Any kind of type of tool or devoted gadget called for to the appropriate performance and additionally use of the tools included.Incinerator clinical waste diesel, building and construction in painted steel light weight aluminum resistant to heats up, device control

indication flame, reload indicator, temperature level control gadget, dropping ability of 250kg/ 10 humans resources in 2 stages

(key video camera as well as extra digital video camera). One heater to be set up in an university hospital of 440 architectural beds as well as 375 management beds. This heating unit needs to have the ability to lose from 180 to 220 kilo daily of clinical waste and all-natural waste.
2. One heating unit to melt run out drug that can incinerate around 500 kg of medications or around 4,000 kg of gone out medication per day.a biology research laboratory takes advantage of an average of 2 000 rats every year as well as likewise we intend to have a tool to blaze and likewise remain free from positioning them in the landfill.-Muhimbili National University hospital.
– – Kigoma Regional Health Center.
– – Ndanda Objective University Hospital.
– – Musoma Regional Health Center.
– – Mnazi Mmoja Medical Facility in Zanzibar. waste Burner that can be set up in a truck and likewise mosts likely to numerous cities to blaze Community Solid Waste, shows all type of waste, plastic, organic.an industrial incinerator to 1000 pounds per hr, for natural substratum along with waste,.
he wants to understand advantages of each heater.
as well as usage: gas or diesel, rates as well as averages separately,.
He desires a furnace (economizer) for water 60 ° C, and to understand the required water blood circulation. presure in advance 500 mts and into in 3 kg/cm2 vessel.ACL Health care center, Abuja (Nigeria)

Mmedical waste burner with the ability of getting rid of as much as 0.25 cubic meter of pathological or contagious waste.

hospital incinerator distributor

CSH Wellness Facility, (Calabar, Nigeria)

Mmedical waste burner qualified of obtaining rid of roughly 0.5 cubic meter of pathological or contagious waste.

Burner to have twin burning chamber as well as control amount of dioxin as well as various other gasses discharged without being damaging.

Approximated measurements, to distributors common, nevertheless to be portable as practical.
Established to shed disposables that can along with need to be destroyed on-site. Theses wastes include additionally polluted as well as transmittable “red bag.” Surgical dressings, plastic evaluation devices as well as additionally other wastes.
Quick, complete, trustworthy waste disposal.
Dual chamber burning, Chambers shielded in addition to lined with heat refractory. Programmable electronic temperature level controls, temperature level indicators as well as likewise charge recorder. Regulating control for gas and also air lowers gas consumption.
Minimum installation along with launch time.
Aluminized steel layer lined with refractory as well as likewise firebrick. Displays recorders in addition to various other accessory devices should certainly be provided.
Billing system:.
– – Upright cost door on key chamber.
– – Pneumatically-driven or hydraulic ram payment system.
– – Car closed down of the door after charging.
– – Primary as well as second chamber temperature provided as well as likewise taped (optional).
Billing cost:.
– – About 100kgs per human resources of waste or red bag waste ranked at 2200 BTU’s per kg.
Gas:- Gas.
Capacity (Cubic Mtr): 1.65 M3 or perhaps more.
Ave Capacity: 100kg per hour.
Extra Chamber Ability (CubicMtr):3.88 and even much more.
Size (mm): 1880 or better.
Size (mm): 1280 or far better.
Height Incl. Flue (mm): 7700 or far better.
Ash Door Opening (mm): 475 × 900 or much better.
Min. Running temperature: 90 level centigrade.
Max, Operating Temperature: 1350 level centigrade.
Residency time in Second Chamber: 2 sec.
Temperature level Tracking: Both for essential as well as also additional chambers.
Packing SystemManual/semi-automatic.
Waste damages efficiency: > > 90% by weight.
Filter: Numerous or ceramic various other equivalent filters in order to lower the induction of hazardous air impurities, particulates, carbon monoxide, dioxin/furane right into the ambience.
De ashing system: Manual/semi-automatic.
– Civil functions. – Waste collection Trolleys

Total/ Paint:-.
Premium top quality warm immune, 2 layers modern epoxy Paint layer.
Set Up Power (Electric Voltage): 440V/ 50 Hz.
Waste Monitoring Equipment should have;.
Mobile packaging cart: 06 No’s– – For transportation of health center waste from wards to heater site/ location, Opening up from the top.
WASTE BINS MOBILE: 06 No’s- Created from Plastic, in blue color with a cover flap.
Plastic Bags: 2000 no’s each in Red as well as likewise Yellow shade.
Sturdy Hand Protection Pairs: For Waste handling staff-06 Pairs.
Lengthy Shoes Pairs: For waste handling– – 06 Pairs.

CSH Health And Wellness Facility, (Calabar, Nigeria)

Mmedical waste heater capable of obtaining rid of roughly 0.5 cubic meter of pathological or transmittable waste.

About Us

Nanjing Clover Medical Technology Co.,Ltd. local in Nanjing city, China which is near to Shanghai port.

We are Waste Incinerator Manufacturer in China. We produce medical waste incinerators, pet animal cremation equipment and othe solid waste incinerators. The burning rate from 10kgs,20kgs,30kgs,50kgs,100kgs,150kgs,200kgs,300kgs,500kgs,600kgs per hour, the daily treatment capacity up to 6ton per day.

Clover Incinerators made all double combustion chamber, Italy original oil or gas burners. We use stainless steel chimney for our incinerator with long lifetime. For clean emission, we supply dry or wet scrubber with advantage technology.

Incinerator market and customers are all over the world and have local dealer supply direct service.

Nanjing Clover Medical Technology Co., Ltd.  is a leading waste incinerator manufacturer in China. All series included burning capacity 10kgs per hour, 30kgs per hour,50kgs per hour,100kgs per hour,150kgs per hour,300kgs per hour,500kgs per hour. Up to now, all models sale to all over the world and have good feedback from end-customer. The YD Model medical incinerator have multi-combustion chamber and basic dry scrubber (smoke filter chamber) with reasonable project budget. For the cleaner emission require, we accept custom made wet scrubber for incinerator and this will be also our next working by focusing on emission technical.

Regular model incinerator for market with burning rate from 10kgs to 500kgs per hour and we always proposal customer send us their require details, like waste material, local site fuel and power supply, incinerator operation time, etc, so we can proposal right model or custom made with different structure or dimensions.

Incinerator Model YD-100 is a middle scale incineration machine for many different usage: for a middle hospital sickbed below 500 units, for all small or big size family pets (like Alaskan Malamute Dog), for community Municipal Solid Waste Incineration, etc. The primary combustion chamber volume is 1200Liters (1.2m3) and use diesel oil or natural gas fuel burner original from Italy.

All our incinerator use stainless steel chimney, not steel.All our incinerator have two combustion chamber at least, not single chamber. All fuel burner from Italy made with famous brand, best quality.

300kgs per hour burning rate incinerator is well liked by market because this model can be medical waste incineration equipment for big hospital and also very good for other solid waste treatment with lowest cost, even if big size animals also can be feed into the combustion chamber. The primary combustion chamber volume is 2.4m3, big enough for common size animals. For shipping transport, YD-300 can be loaded into 40’feet full high container.

Big size combustion chamber up to 4.0m3 and Internal Dimensions is 257 x 147 x 108cm with feeding door opening 108 x 128cm. This model can be a small waste incineration factory with little amount of budget funds. If end customer use this for farm to burn animals like cow, horse or camel, contact with us now.

Contact with us by email or phone now!

Email: [email protected]
Phone: +86-25-84610201

Project Case

Waste Incinerator International Market Analytics

Date. Jun. 10, 2012

Key Word:

small incinerators

medical waste incinerator

pet animal cremation incinerator

incinerator manufacturers

Incinerator is a incineration equipment, direct fire waste by gas fuel or oi fuel. As different circumscription, incinerator can be named many words as below:

Treatment capacity: small scale incinerator, large scale incinerator and incineration pant.

Waste material: Municipal waste incinerator, medical waste incinerator, animal cremation incinerator, human cremators

Incinerator fuel: gas incinerator, oil incinerator

Waste to Energy (WTE): WTE incinerator, non-WTE incinerator

Incinerator Manufacturer: China incinerator manufacturer, UK incinerator manufacturer, USA incinerator manufacturer, India incinerator manufacturer.

Famous Incinerator manufacturer company: Inciner8(UK), Clover Incinerator(China), Pennram (USA) , Haat (India)

Burning Rate: 5kgs/hour, 10 kgs/hour, 15 kgs/hour, 20 kgs/hour, 30 kgs/hour, 50 kgs/hour, 100 kgs/hour, 150 kgs/hour, 300 kgs/hour, 500 kgs/hour

Pyrolytic incineration technical is traditional waste treatment way for many years. All over the world, in many countries, people anti incinerator because the incinerator will produce a large Dioxin in the smoke. “Dioxins” refers to a group of toxic chemical compounds that share certain chemical structures and biological characteristics.  Dioxins can be released into the environment through forest fires, backyard burning of trash, certain industrial activities, and residue from past commercial burning of waste.  Dioxins break down very slowly and past releases of dioxins from both man-made and natural sources still exist in the environment. Anyhow, we have to remind that, this is large scale incineration pant, generally more than 30 ton per day. This is a social problem, to analyze and suggest ways in different angles from the public, government, economic development, environmental protection, technology development, etc.

So, why we still use incinerator?

First, for the medical waste from hospital, the pyrolytic incinerators is best treatment up to now. Pyrolytic technology can kill the virus, pollution control.

Second, for human body, pet animal, in many countries and regions, we desire to cremation them. This is the ceremony in the process of society development, and ceremonies to commemorate the disappearance of life.

As above two reason but not only above, we still use incinerators.

How you can find reasonable incinerator for your local site?

Incinerator is not a cheap equipment, generally the small scale model’s price around $5,000usd per unit and large scale model’s price more than $50,000usd per unit. So, before purchase one unit incinerator, you have to make clear following items:

A, burn what? Incinerator is a incineration equipment, function is fire waste. So what kind of waste you want to treatment?

B, small or large? This according to the waste output every day or the waste volume per feed time, like animal size.

C, fuel? Incinerator use oil or gas fuel, generally, gas fuel is cheaper than oil and the smoke cleaner than oil fuel model. But some local site don’t have gas supply system.

And other technology items, like power(220v, 380v), waste feed door type, incinerator structure, etc.

After you clarify these, you can go to find a local or international manufacturers, asking prices, technical specifications and ultimately purchasing the right products.

Wrote by Nicky

List of Incinerator Customers

Asia:

East Timor

Papua New Guinea

Indonesia

Kazakhstan

Viet Nam

Georgia

United Arab Emirates

Iraq

Africa:

Somalia

Mauritius

MoroccoI

Tanzania

Rwanda

Zambia

Oceania:

Australia

Europe:

Belgium

Moldova

North America:

United States