Tag: Waste Incinerators

Model TS30 oil fired waste small incinerator 30kgs/hr.

Items/Model	TS30( PLC)
Picture
Melt Rate	Typical 20-30 kg/hour
Feed Capability	Typical 60kg per feeding
Control Setting	PLC( Programmable Reasoning Controller Incinerator)
Burning Chamber	330L
Inner Dimensions	75x75x60cm
Secondary Chamber	180L
Smoke Filter Chamber	Yes
Feed Setting	Handbook Feeding
Voltage	220V
Power	0.5 Kw
Oil Consumption (kg/hour)	Average 13.3
Gas Intake (N.G, m3n/Hour)	Typical 16
Gas Intake (L.P.G, m3n/Hour)	Ordinary 11.7
Temperature Level Screen	Four Digital Display
Temperature Defense	Yes
Oil Tank	100L or More( Optional)
Feed Door	55x50cm
Chimney	5Meter or More( Optional)
Chimney Kind	Stainless Steel
1st. Chamber Temperature	800 ℃–– -1000 ℃
2nd. Chamber Temperature Level	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	4000kg
Outside Dimensions	175x120x140cm

***Primary Combustion Chamber

*** Second Combustion Chamber *** Smoke Filter Chamber

***Chimney:10.0Meters

*** Burner PLC Control Instance

***Italy oil/gas burner: 02 units

***Oil Tank (if oil fuel): 200Liters

Items/Model	TS100( PLC)
Concept	Waste Incineration Treatment
Burn Price	Standard 100 kg/hour
Feed Ability	Average 200kg/feeding
Control Mode	PLC( Programmable Reasoning Controller Incinerator)
Combustion Chamber	1200L
Inner Measurements	120x100x100cm
Additional Chamber	600L
Smoke Filter Chamber	Yes( Dry Scrubber)
Feed Mode	Manual
Voltage	220V
Power	0.7 Kw
Oil Usage (kg/hour)	14–– 28
Gas Usage (m3/hour)	10–– 32.2
Temperature Display	Digital Show
Temperature Protection	Yes
Oil Storage Tank	200L
Feed Door	80x60cm
Smokeshaft	10Meter
Smokeshaft Type	Stainless-steel
1st. Chamber Temperature Level	800 ℃–– -1000 ℃
second. Chamber Temperature Level	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	6000kg
Exterior Measurements	260x150x180cm

Items/Model	TS50( PLC)
Picture
Principle	Strong Waste Incineration
Burn Price	30-45 kg/hour
Control Mode	PLC( Programmable Reasoning Controller Burner)
Burning Chamber	560L
Inner Measurements	100x80x70cm
Secondary Chamber	280L
Smoke Filter Chamber	Yes
Feed Setting	Manual
Voltage	220V
Oil Intake (kg/hour)	Typical 13.3
Gas Consumption (m3/hour)	***
Temperature Display	Digital Show
Temperature Level Defense	Yes
Oil Storage Tank	800L
Feed Door	70x55cm
Chimney	5Meter
Chimney Kind	Stainless Steel
1st. Chamber Temperature Level	800 ℃– -1000 ℃
second. Chamber Temperature Level	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	4500kg
Exterior Measurements	230x130x155cm

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

Items/Model	TS100( PLC)
Photo
Concept	Waste Incineration Treatment
Burn Price	60-80 kg/hour
Control Mode	PLC( Programmable Reasoning Controller Incinerator)
Combustion Chamber	1200L
Interior Measurements	120x100x100cm
Second Chamber	600L
Smoke Filter Chamber	Yes( Dry Scrubber)
Feed Setting	Manual
Voltage	220V
Oil Consumption (kg/hour)	Typical 20.4
Gas Intake (m3/hour)	***
Temperature Monitor	Digital Present
Temperature Level Defense	Yes
Oil Container	1100L
Feed Door	80x60cm
Smokeshaft	10Meter
Chimney Kind	Stainless Steel
1st. Chamber Temperature	800 ℃– -1000 ℃
second. Chamber Temperature Level	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	6000kg
External Dimensions	260x150x180cm

The requirement is for a pyrolytic double-chamber incinerator. The incinerator shall be capable of using diesel 

fuel as a supplemental fuel oil.

It should incorporate an Air Pollution Control (APC) System suitable for basic emission control.

The proposed incinerators shall be appropriate for critical harsh environmental conditions, suitable for rapid 

deployment, and different climate zones (e.g. desert, tropical country, mountain, etc.) in which there are several 

variations of the relative natural forces (e.g. temperature, humidity, wind, etc.) for a minimum period of 10 years 

if the specified maintenance schedule is followed.

The incinerators should be supplied assembled, whenever possible, and all parts and components should be 

packaged on pallets in order to be transported via road, air (via helicopters or air-cargoes, e.g. MI8 or C130) 

and via sea in a 20’ ISO sea shipping containers.

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21

Items/Model	TS500( PLC)
Picture
Concept	Waste Incineration Treatment
Burn Price	150-200 kg/hour
Control Setting	PLC( Programmable Logic Controller Burner)
Combustion Chamber	2700L
Interior Dimensions	190x120x120cm
Second Chamber	1300L
Smoke Filter Chamber	Yes
Feed Mode	Handbook
Voltage	220V
Oil Intake (kg/hour)	Ordinary 28
Gas Usage (m3/hour)	***
Temperature Display	Digital Display
Temperature Security	Yes
Oil Tank	1400L
Feed Door	90x80cm
Chimney	10Meter
Smokeshaft Kind	Stainless Steel
1st. Chamber Temperature	800 ℃– -1000 ℃
2nd. Chamber Temperature	1000 ℃ -1200 ℃
Residency Time	2.0 Sec.
Gross Weight	15000kg
Outside Measurements	400x210x300cm( without chimney)

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The minimum combustion temperature of the primary chamber should not be less than 850°C;

The primary combustion chamber should be equipped with a means to provide supplemental liquid fuel supply.

The primary chamber should be cold face refractory lining, with a minimum thickness 100 mm.

The following conditions should be met in the secondary combustion chamber:

The air supply should be controlled efficiently;

Flame contact with all the gases should be achieved;

The size of the secondary chamber should be properly designed to ensure that the gas retention time should not be less than 2 seconds;

The secondary chamber should be cold face refractory lining, with a minimum thickness 100 mm;

The chamber should incorporate an integrated combustion burner air fans with automatically controlled distribution;

The gas temperature, as measured against the inside wall in the secondary chamber (not in the flame zone) should not be less than 1,100°C;

HICLOVER – Medical Environmental 

---

 

WWW.HICLOVER.COM

Waste Incinerators

Medical Waste Incinerator

Pet Animal Cremation

Solid Waste Incinerator

Tel:  +86-25-8461 0201   

Mobile: +86-13813931455(whatsapp/wechat)
Website: www.hiclover.com  
Email: [email protected]
Email: [email protected]  

Nanjing Clover Medical Technology Co.,Ltd.

 

2020-03-21